Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.7 LAccepted-AOC | L1 | Accepted-AOC SINCE L1 | |
| 2 | L2₹40.6 L+₹14,786 (0.37%)Rejected-Finance | L2 | Rejected-Finance SINCE NOT L1 |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
13 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE DEOLALI
GE DEOLALI, 422401
MISCELLANEOUS MAINTENANCE REPAIRS TO VARIOUS HANGERS AT BHAGUR AIR FIELD UNDER THE AOR OF GE DEOLALI
2022_MES_552676_1
8144/E8
Open Tender
Civil Works
Item Rate
180 days
GE DEOLALI
CLASS D cat a i
8 documents required · 8 mandatory
₹500
Yes
GE DEOLALI
₹96,000
Yes
16 Dec 2022
17 Sept 2022
15 Oct 2022
17 Sept 2022
13 Oct 2022
1 Oct 2022
Amount
Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.
M&L for brick work with fly ash old size bricks, straight or curved on plan n.exc 6m mean radius, built in cm 1:6 complete all as specified and directed.
M & L for except brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius with old size bricks in CM 1:6 complete all as specified and directed.
M & L for walling of random rubble uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.
All as per sr. item No.4 above but except stone
Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to random rubble walling,uncoursed or brought upto courses
Taking down carefully existing unserviceable bitumen felt(any number of layers) including plaster of any thickness,wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall,PCC fillets,benching etc and removing of the rubbish to a distance not exceeding 500 M from the building and depositing where complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.
M &L for providing 50 mm thick plain cement concrete 1:2:4 type B-1 (using 12.5 mm graded stone aggregate) Finishing cement concrete surface even and smooth using extra cement for filleting, benching,coving of chajjah top/junctions,padding concrete below roof treatment etc slightly rounded or chamfered on edges wherever required including necessary form work / moulds etc complete all as specified and as directed . Note: Water Proofing compound shall be measured and paid separately.
M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :- i) Apply Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.0 Kg / Sqm reinforced with non woven polyester mat weighing not less than 150 gm/Sqm all as specified procured from any one of the approved manufacturer's instructions iii) Apply two coat of aluminium paint @ 0.15 Kg/Sqm over membrane over roof surfaces complete all as per manufacturer's instructions and as directed .
Supply only water proofing compund as specified and directed.
Dismantling floor or wall tiles including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
M & L Vitrified ceramic tiles of light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6 ,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed.
M & L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.11 but n exc 0.18 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over and including 15mm screed in CM 1:6 or with chemical cement to match all as directed.
M&L for joint free coloured glazed ceramic tiles in vertical surface of size 450X 350X 7mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed and specified.
M & L for chequered cement concrete tiles rubber moulded , 30cm x 30cm x 25mm thick confirm to IS 13801-1993 , set jointed & pointed in neat cement slurry with grey cement and pigment in floors complete all as specified and directed
M&L for Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes
M&L for cement concrete type B0 (1:2:4) using 20 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.
M&L for providing PCC (1:2:4) using 20mm graded stone aggregate as in coping, slab supported on wall, beam, lintels etc complete all as directed by Engr in charge.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.
Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.
Taking down cement mortar plastering on brick or stone walls, etc. including raking out joints,hacking for key,scrubbing down with water, etc.
M & L for Rendering 15mm thick in CM 1:4 on fair faces of stone masonary work or surfaces finished even and smooth without using extra cement complete all as specified and directed
M&L for rendering 15mm thick on brick masonry wall in cement mortar 1:4 finishing the surfaces even and smooth( without using extra cement) complete all as specified.
M&L for preperation of new surfaces of ceilings, and three coats of white wash over 5mm thik cement plaster of cm 1:4 on ceillings and all as specified and directed.
M&L for applying two coats of cement base paint over chalk whitening over newly plastered surfaces of walls including preparation of surfaces all as specified.
Dismantling of posts or struts(wood, steel or RCC) any section embadded in concrete, including taking out embedded portion and making good disturbed ground all as specified and directed.
Dismantling of fencing wire mesh of any type complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil.
M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed.
S & F in repairs galvanized 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing & straining & fixing to any type of standards rails straining bolts including securing or tying at crossing with & provn of galvanized mild steel wire complete all as specified and directed. (Each line wire to be measured)
M & L for RCC 1:2:4, type B-1, (using 20mm graded stone aggregates) as in precast fencing posts, stuts etc area exc 100 & not exc 250Sqcm including form work etc complete all as specified:- (Reinforcement shall be measured and paid seperately.)
Supply only chain link MS galvanized fencing of any size or type complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire
S & F mild steel bolt screwed one end with hexagonal or square nuts & washers the other end enlarged not exc 15cm long dia of neck 12mm complete all as specified and directed.
M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 all as specified and directed.
S & F mild steel flat iron, round or square bars, in available lengths, Fe-290, Gde-E-165 complete all as specified and directed.
S&F 10mm dia MS Round bars as in support of Chain Link Fencing all as specified.
M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer all as specified and directed.
M&L for preparation of new steel Surfaces of any description, n.exc 10cm in width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer all as specified and directed.
M&L for Providing, cement concrete type B1 1:2:4 (using 20mm graded stone aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses,parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for water troughs and the like including weathering, slightly rounded or chamfered angles and throating, all complete all as specified and directed
M & L for Providing precast cement concrete louvres and jallies Type BO 1:2:4 (using 12.5mm graded stone aggregate) Set in cement mortar1:4 , 30 mm thick (measured solid ), including all mouldings but excluding frame as directed by Engr in charge.
M & L for 75 mm thick Cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate ) as in Plinth protection.
Dismantling structural steel work including doors, gates but excluding framed trusses complete all as specified and directed.
Supply and fix for framed work as in doors or gates of angle or other section with gusset Plate, rails,braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges and door fittings necessary rivetting/welding cutting up complete steel conf. toFe 410-W (Gde- E- 250) quality- A all as specified and directed. Note : Distrubed surfaces of wall shall be made good to true surface.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete all specified and directed by Engineer-in-Charge.
M&L TMT steel bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc as specified and directed by Engineer-in-Charge.
M & L for precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggreates) set in CM 1:4 as in cover slabs (for manhole etc) & simillar articles with plain faces complete (Reinforcement will be measured and paid separatly) complete all as specified and directed.
Excavation in trenches n.exc 1.5m wide and not exceeding 1.5 m in depth for foundation etc, or for shafts, wells, cess pits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft / loose soil etc complete all as specified and as directed by Engineer-in-Charge.
Returning, filling in soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each in soft / loose soil etc complete all as specified and as directed by Engineer-in-Charge.
Removing of surplus excavated material upto a distance exc 50 m but not exceeding 100m and depositing where directed at a level not exceeding 1.5 m above the starting point etc complete all as specified and as directed by Engineer-in-charge.
Supply and lay reinforced concrete drain pipes class NP-2, 150mm bore, laid in trenches and jointed complete with collars etc complete all as specified and directed by Engineer-in-Charge.
M&L for 1:4:8 type D-2 (using 40mm graded stone aggregate)Concrete bed (100 mm thick ) to drain pipes including including packing under, and hunching against the sides of pipes after they are laid and tested for 150 mm bore of pipe etc complete all as specified and as directed by Engineer-in-Charge.
M&L PCC (1:5:10) for type E-2 (using 40 mm graded stone aggregate) in foundation concrete and mass concreting etc complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs 10 ltrs capacity PVC flushing cistern, low or high level, with inlet and outlet pipe, ball valve, syphonic action type, float and handle, pull or push type including brackets etc complete all as specified and directed.
S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.
Hacking out old broken glass from metal frame including punching or drilling out old glazing pins complete all as specified and directed
M & L for 4.00mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
M&L for in repairs 18/19mm thick prelaminated particle board, exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in kitchen cabinets shutters and shelves cut to the sizes as directed etc complete all as directed.
S & F 100 mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and directed
S & F 75 mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and directed
S & F 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floorr complete all as specified and directed.
M & L Overhauling of steel rolling shutter with bevel gear box of size not exc. 15.00 sqm each including taking down and refixing in same opeing, greasing, oiling and miscellaneous repairs,welding etc and chaning of unserviceable items required at site complete all as specification and dircted. (unserviceable items shall be paid separtaly)
M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete incl screed bed 15mm thick in CM 1:6 complete all as specified and directed.
All as per item no 64 above but prepolished stones in skirtings 100mm high with and including 10mm thick CM 1:4 backing coat complete all as specified and directed.
M&L for Preparation of old plasteres surfaces including crack filling with Smart Care textured crack filler, removing unnecessary nails and applying 01 coats of cement base paint walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces as recommended by manufacturer of complete all as specified and directed.
M&l for preparation of /old plastered surfaces as in ceilings and applying one coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge.
M&L for preparing old wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparing old steel surfaces of any description, not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.
S&F rotational moulded polyethylne water storage tanks (cylindrical, vertical with closed top) hoisted and fixed in position of 500 ltrs capacity including taking down old one all as specified and as directed.
S&F rotational moulded polyethylne water storage tanks (cylindrical, vertical with closed top) hoisted and fixed in position of 1000 ltrs capacity including taking down old one all as specified and as directed.
M&L for welding in repairs to steel windows/doors n. exc 6.00 cm in length Peg stay , Butterfly handle and thikness of metal to be welded n. ec 6mm complete all as specified and a directed.
Re-securing or easing and adjusting taking down shutters in same opening of any description exc 1 sqm an n.exc 2 sqm each all as specified and as directed.
M&L for preparation of old surfaces including filling of cracks/holes by crack filler, removing unnecessary nails and applying 02 coats of Oil bound distemper (light shade) @ 12 sq.m/litre/2 coats to interior wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer by using following brands and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac or equivalent as approved by GE.
Taking up or down steel tubing and connections including cleaning for refixing or removal to store in 15mm bore.
Taking up or down steel tubing and connections including cleaning for refixing or removal to store in 20mm bore .
Refixing old steel tubing and connections in new or old position ( walls, ceiling, floors etc ) in 15mm size
Refixing old steel tubing and connections in new or old position ( walls, ceiling, floors etc ) in 20mm size
M&L for tubes medium grade , galvanised with all fitting and fixed to walls and ceilings or laid in floors in 15mm size
M&L for tubes medium grade , galvanised with all fitting and fixed to walls and ceilings or laid in floors in 20mm size .
Taking down door shutter with frame n exc 1.5 Sqm each complete all as specified and directed
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as directed.
Repairs/easing/Greasing of steel windows with each side hung shutters including projecting type hinges of steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded incl two coat of synthetic enamel painting over a coat of primer etc complete all as directed.
S&F in repairs 15mm bore fancy type bib taps, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe etc complete all as directed
S & F 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and directed
Taking down unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, socket outlets, ceiling roses, pendent brackets, holders etc.removing marerialso storeforeeping in safe custody or for taking credt and making good disturbed surfaces of walls, floor etc.complete all as directed.
Dismantling of cross arms of MS fabricated complete with all accessories viz nut, bolts, washer etc. complete all as specified and directed.
Taking down existing defective LT under ground cable of any size from trenches complete all as directed
Material and labour for point wiring with two runs of stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including PVC casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for One light/fan/bell point controlled by one switch.
M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid new PVC conduit medium grade ISI Marked not less than 20 mm dia and all conduit accessories concealed in wall on surface in ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated modular metal flush box, concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc, complete all as specified for the following:-
One light /Ceiling fan/exhaust fan point controlled by one switch.
One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board
One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.
M&L point wiring with PVC unsheathed multi stranded copper conductor cable 2.5 sqmm FRLS 1100 Volts in New PVC concealed conduit medium grade ISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 1.5 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one 15 A switch socket power point, all as specified
Supply and fix switch piano flush type single pole one way 6 Amps complete all as specifed .
S&F socket outlet 5 pin 5 Amp flush type ISI marked complete all as specified.
S&F socket outlet 2 in 1,3 pin 5/15 Amps ISI marked complete all as specified.
M&L switch piano flush type 15 Amp SP one way ISI marked complete all as specified.
M & L for ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.
S & F electronic fan regulator, switch type, 5 step ISI marked connecting complete all as specified.
M&L angle Lamp holder with metallic ring, PVC/Polycorbonate type with back plate complete.
S & F LED bulb 12 watts, 1200 lumens output, 6500K suitable for B-22 base .
S&F wall mounted LED Light fittings, 4 feet long, with 18 W LED tube rod and box type batten double side connection type complete all as specified and directed.
S&F wall mounted LED Light fittings, 2 feet long, 9 W, polycarboate housing and integrated electronic driver complete all as specified and as directed.
S&F in replacement Decorative wall light fixture, plastic body and designer mesh in gold finish suitable for and incl with 10 Watt LED lamp (B22 base)all as specified and directed.
S & F in replacement Energy saving and environmental friendly long life LED 45 watt street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and Impact resistance of IK07 with 10KV Built-in Surge Protection Device.(suitable for poe/bracket dia 54 mm)
S&F in replacement Post top, (Coral Opal) landscape luminare with high power LED 25 W making arrangement for fixing light fittings on pole/stand post/pillar with GI pipe all as specified and directed
S&F in replacement Energy saving, environment friendly & robust IP 65 protected 120 Watt LED midbay with PDC housing suitable for ceiling (Surface/Suspended) mount & in Wide beam optics.
Supply & Fixing in repairs LED flood light fittings 50W LED IP65 COB LED as light Source, Symmetric type including required accessories, clamps and eletric connections complete all as specified and as directed.
M&L for earthing GI Strip complete with galvanized steel plate electrode 600 mm x 600 mm x 6.0 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron strip 32 x 6 mm size by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 40 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified. Note: The unit rate includes earth strip and protection pipe upto (maximum 7.5 metre from earth plate) earth point/test point.
M&L for XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100V grade, cross sectional area as given th size of 70 Sqmm 3.5 Core
Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in soft/loose soil complete all as specified and directed.
Supply & lay in trenches double walled corugated HDPE pipe 75 mm dia high density for protection of under ground cables( Note: pipe couplers with seal, bends, end covers etc are deemed to be included in rate quoted)
Removing of excavted soil upto to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
S&F in repairs 'Tubes "light grade" galvanised iron, laid under roads/drain, fixed to poles, walls, with flat iron clamps bolts/nuts/washers of the following sizes of 50 mm diabore complete all as specified and directed.
M&L for Cross arms, bracings, supports,clamps and back plates fabricated from structural steel sections including nuts,bolts,washers, welding , bending cold or hot, drilling holes for bolts,in any shape or sizes as indicated or directed and inclusive of one primer coat and two coats of alluminium paint complete all as specified and directed.
M&L for scrubbing out old paint, rust etc from HT two pole structur and making smooth and even surface then painting with one coat of anti rust paint and two coat of superior quality aluminium paint on entire exposed portion of two pole structure and writing Abbreviated feeder name in 2 " size with white paint on black base all as directed at site(work shall be completed in the stipulated period as directed by Engineer -in-charge).
M&L for scrubbing out old paint, rust etc from 9 mtr steel tubular pole of any size and making smooth and even surface then painting with one coat of anti rust paint and two coat of superior quality aluminium paint on entire exposed portion of pole structure and writing Abbreviated feeder name in 2 " size with white paint on black base all as directed at site(work shall be completed in the stipulated period as directed by Engineer -in-charge).
M & L for Levelling, cleaning of ground around 2 pole structure and filling & spreading evenly stone boulders of approximate size 40 mm.
S&f Wall mounted fans AC single phase 230/240 V, of size 400 mm sweep, aerodynamic design, air delivery >70 CMM, 3 blade, double chord, thermal overload protected motor, speed RPM 1400, Sturdy and shock proof body for fixing of wall fan complete. speed RPM 1400,Sturdy and shock proof body for fixing of wall fan complete.
S&f fresh air fan PVC body, air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete.
M&L for breaking the old existing wall and making provn of a round hole for fixing of 300 mm sweep exhaust fan including making good to the disturbed wall/ portion and matching with existing colour.all as specified and directed.
Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.
Supply and fix in repairs MCB triple pole and neutral 415 V 63 Amps complete all as specified and directed. .
S&F MCB SPN 40 Amp "C " curve
S&F MCB SP 6 to 32 Amp "C" curve.
M & L repairs sub main wiring with 2 single core, 6 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FR cable 1100 Volts grade including 6 Sqmm PVC insulated unsheathed multi stranded copper conductor FR as continuous earth wire drawn through Casing caping and connecting to common earth terminals complete all as specified and directed. Note :- (i) Two runs of copper cable and one run of earth wire including conduit /PVC casing/caping shall be measured as one length.
All as per item No - 126 above but with 2 runs of 4 Sqmm cable with one run of 4 Sqmm cable for earthing.
S&F in replacement sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 230 volts, 50 Hz, 10KA breaking capacity complete.
Supplying and Fixing/connecting for service connection/ Flood/hanger light connection, 1100 volts weather proof flat twin core Cable PVC insulated aluminium multy sranded conductor of sizes 4 Sqmm 2 Core Complete all as Specified and Directed.
----Ditto---- above item no-129 but size 6 Sqmm 2 Core.
Note: Amount of sch of credit of Rs.71,606.00/-will be deducted from total amount of BOQ.
M/S R.K.S. CONSTRUCTION
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .