REPAIR / MAINT OF FENCING, BOUNDRY WALL, DRAINAGE, HARD STANDING, SEWER LINE, MANHOLES AND CLEANING OF SEWER APPURTENANCES AND SEWAGE LINE IN NOM VARUNA, NCN DATA CENTRE AND PALAM BAGH AND REPAIR/ MAINTENANCE TO JOINERY, INTERNAL WATER SUPPLY LINES,C

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for brick work with sub class B bricks, straight or curved on plan exceeding 6 M mean radius in half brick thick walls built in cement mortar 1:4 complete all as specified.

Taking down cement plaster on brick walls, raking out joints locking for key, scrubbing down with water etc all as specified

M&L for rendering 15 mm thick ready mix plaster (Make - Ultratech/Readiplast RP) including application of bonding coat as per manufacturer's instruction on fair or other than fair faces of brick or concrete external surfaces of walls finished even and smooth complete all as specified and directed.

Supply only water proofing compound liquid @ 200 ml / per 10 sqm area of plaster complete all as specified and directed.

M & L Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over including 1.5 mm thick wall care putty on wall surface complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S & F 110 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. Make:- Prakash / Supreme/ Prince

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 making good of dismantled portion by plastered work and match with existing surface complete all as specified and directed.

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as directed (each line wire to be measured)

All as per item no. 12 above but restraining and resecuring including making good staples etc complete all as specified and directed.

S&F in repairs concertina coil fencing with punched tape concertina coil stretched to a length of 10 metres to achieve 600 mm dia (weighing not less than 8.50 Kg per 10 RM of length), having 50 Nos rounds per 5.4 metre length, spring core wire (2.5 mm thick) of high tensile strength of 165 kg/sqmm with tape (0.52mm thick) and weight 43.478 gm/metre and fixing the same with existing Y-shape angle iron to steel parts and another coil/MS Nibs alloys shown on drgs incl fixing with special galvanised fasteners such as clips, U clips all as specified and directed. Note :- Linear length of coil after stretching and fixing shall be measured for purpose of Payment.

S&F steel work in tubular tru-sses of required shape including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS 1164-1979 grade st-240, structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at contractors workshop before fabrication complete all as specified and directed.

M&L for Y shape angle posts ,struts and similar works as in fencing including cutting tops to slope as directed , drilling holes , notching for wire etc, including all necessary drilling bolting or riveted and similarly work confirming to Fe-290 all as specified and directed.

M&L for preparation of new or previously untreated surfaces, of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide all as specified and as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, colour as approved by Engr in charge complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, colour as approved by Engr in charge complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M & L 10-12 mm thick heavy duty Endura parking tiles 400 x 400 mm of any colour and pattern decided by Engr-In-Charge as in paving laid over 20 mm thick screed bed 1:4 set jointed with cement slurry mixed with pigments to match the shade of tiles complete all as specified and directed. Make : Johnson / Kajaria / Somany

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15 cm thickness.

M&L 50 mm thick 1:3:6 type C-2 using 20 mm graded stone aggregates as in plinth protection laid in panels surfaces finished even & fair without using extra cement incl all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar.

M&L Granite (of any type) 20mm thick machine cut, bedded with 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, moulding and polishing complete all as specified and directed.

M&L 20 mm thick granite (of any type) machine cut as in vertical surfaces and like, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding, moulding and polishing laid over and including 15 mm thick rendering in CM 1:4 complete all as specified.

M&L Machine cut kota stone slab flooring 20-25mm thick , bedded with 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M and L 22-25 mm thick Red Agra sand stone as in wall cladding, steps, footpath gang saw machine cut edges , polished, over 20mm thick cement screed in CM 1:4,set and jointed in cement mortar 1:3 and pointed in cement mixed with approved pigment to match the colour of the stone ( Note:- Size and colour of stone to be matched with existing stone) complete all as specified and directed.

S&F Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sq. m area and not exceeding 0.5 sq. m fixed with and including one number SS clamps (grade-202) of flat-30mm X 2mm , making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment complete all as specified and directed. ( Note:- Size and colour of stone to be matched with existing stone)

S&F in repairs factory made manholes covers with MS flat all round the cover and incl reinforcement with cement concrete 1:2:4 type B-I, (20mm graded stone agg. ) of any thickness and size laid with cement mortar 1:6 in position including demolition of existing RCC cover slabs complete all as specified and directed.

M&L for one coat of synthetic enamelled paint in any approved pattern and colour including preparation of old painted surfaces of concrete/plaster surfaces exceeding 10cm width or grith not other wise provided

Excavation in trenches in soft/ loose soil not exceeding 1.5 m wide n.exc. 1.5m depth for fdn etc for shaft, wells, cesspits, man holes, pier holes etc. n.exc. 10sqm on plan and n.exc. 1.5m depth and getting out in soft loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm.in soft or loose soil

Removing excavated material n.exc. 50 m and depositing where directed at a level n.exc. 1.5m above the starting point.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar incl cement concrete bedding and haunching for 150 bore pipe.

Ditto as per item no. 36 above but for 200mm bore pipe.

S&F Salt glazed stone ware drain pipes laid in trenches and jointed as specified 150mm internal dia of pipe complete all as specified.

S&F Salt glazed stone ware drain pipes laid in trenches and jointed as specified 200mm internal dia of pipe complete all as specified.

M&L Concrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 for 150mm bore of pipe complete all as specified and directed.

M&L Concrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 for 200 mm bore of pipe complete all as specified and directed.

M&L cleaning and de-silting of sewage lines upto and including 300mm internal diameter of any depth upto three meter depth. The cleaning shall be carried out with super sucker machine. The sludge deposited in the sewage line shall be fully cleaned and disposed off the same outside the MoD land at any distance and without any additional cost on the same day when it was taken out. The job shall be carried out with safety precaution equipment and with strict supervision complete all as directed

M&L for cleaning of all blockages of Nahani traps/floor traps/bottle traps, blockages of WC's, Rain water pipes, Rain water spouts at roof level, 100 mm dia CI pipes upto 1st manhole/GT in shafts, vertical CI soil/waste pipe stacks, CI Tee/door bends etc & cleaning of drain pipes 150 mm to 250 mm internal dia by rodding and manholes upto 3.0 metre in depth and removal of sludge/silt/liquid mud sand (in foul conditions) etc, out of MOD premises (at the location notified by the local Municipal Corporation/Cantt board) complete all as specified and directed by the Engineer-in-Charge to maintain internal & external sewage system in functional state at all the time. The contractor shall engage required skilled manpower and provide all necessary tools and plants (manual/pressure cleaning pump and flexible rods and other necessary equipment (as per rules of public health), etc to ensure resolution of complaint in time frame as desired by Engineer-in-Charge. Any type of complaint related to cleaning of sewage line and other connected items need to be catered for by the contractor. Note :- 1 Contractor may have to deploy more manpower in the particular area and deploy adequate sewage cleaning machinery/ equipment to clean the line and open blockages within 06 hours of complaint received (on same day). 2. In case contractor fails to get the complaint rectified within 06 hours of complaint received, he shall be penalised for the same at a flat rate of Rs 200/- per complaint , in addition to cost incurred by the department for rectification of complaints from third party. 3. Proper records (date wise) of complaints received & rectified by the contractor shall be maintained and shall be produced for verification at the time of payment of each RAR/Bill. Note :- Day to day Complaint received from user's of NOM Varuna, NCN Data Centre and Palam Bagh should be resolved within 06 hours of complaint received. Note :- Removing building materials /old waste unwanted existing material of any description or any type etc. to a distance of 5km or beyond out side MOD Land and the cost for the same is deemed to be included in the quoted unit rates. 4. The contractor must keep in mind the above said provisions while quoting his rates.

M & L for checking the leakage and petty repairs to bib taps, Pillar taps, Stop cock, Concealed stop cock, angle valves, gate valves, flushing cistern, waste pipe/coupling etc of any description or size for stopping leakage of water by changing washers, etc all as specified and directed.

M & L for Repairs to low level flushing cistern syphon, washers, handles, float valves, stopping leakage of Down pipe by applying m-seal and other related works of to make the flushing cistern functional all as specified and directed.

Removal of air lock, blockage of water pipes from OHT tanks to supply point and repairs/adjustment to float valves, applying of M-seal in tanks and all other connected works of water supply from Over head water storage tanks / PVC tanks all as specified and directed. ( NOTE : The rates quoted by the contractor are deemed to inclusive of necessary GI Nipples, GI socket, GI union/ Dhaga/ safeda/M seal .)

M & L for petty repairs to joinery works, such as easing/adjusting of door, repairs of wire mesh, cub board shutters, iron mongery, of any type or description and any type of carpentry works etc Easing of window shutters/CB shutters (One unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing/opening , tightening of hinges or changing the position of hinges, adjustment of tower bolts sliding bolt, handles etc complete all as specified and directed.

M&L petty repairs to plaster, floor, plinth etc and like by PCC 1:2:4 Type B0 and plaster 10 mm thickness using ready mix plaster ( Ultratech/ READIPLAST RP) including bonding coat as per manufacturers instruction as in ceilings/walls etc incl preparing roughening and cleaning the surface and taking down old plaster, finishing even and smooth without using extra cement in patches area n exc. 0.50 Sqm each patch and removal of rubbish off the premises complete all as specified and as directed..

Supply only PVC flush pipe of 32mm dia pipe with two Nos check nuts for connecting low level flushing cistern to EWC/IWC complete all as specified.

S&F in repairs 10 ltrs capacity PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gutties embedded in wall with drilling machine etc complete all as specified. Make : Parry Ware/Cera

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap including making connection to flushing cistern, flushing pipe and jointing socket of flushing rim ( with and including rubber cone joint anti siphonage pipe joint to socket or stopper if any anti siphonage pipe is not required and flushing rim connection to nozzle pattern if require fixing of seat cover for pedestal pattern etc and making good the disturbed surface to match with the existing complete all as specified and as directed.

S&F in repairs vitreous china squatting pan (Orissa pattern) long pan including provision of lime concrete bedding for setting the trap/pan ( 1 lime 2 sand or surkhi and 5 aggregate minimum 150mm thick all-round and finished just below level of rim of pan to receive the floor finishing including fixing/connecting to component, Low level cistern, flushing pipe etc of size 580x440mm white with integral footrest 'P' or 'S' trap front or back inlet complete all as specified (excluding flushing cistern and flush pipe ).

S&F in repairs vitreous china wash hand basin, white flat back of size 550mmx400mm (excluding taps,) but including porcelain stopper and a pair of MS bracket, CP Waste 32mm dia ,waste pipe, chain and plug etc complete all as specified. (Make : Hindware/Cera- Ist quality/Parry Ware).

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified. (Make Commander/Hindware/Parry Ware/Cera).

S & F in repairs mild steel chromium plated hinging device suitable for EWC seat cover all as specified and directed.

S&F in repair Health faucet, CP brass with 1.50m long flexible pipe 15 mm bore of pipe screwed for iron pipe complete all as specified and as directed. .

S & F stainless steel toilet paper holder fixed with gutties and steel screws on walls as directed and approved.

S & F in repairs 100mm cast iron sanitary connection socket to fit WC out-let including taking down old one without damaging WC all as specified and directed.

S&F in repairs 32 mm bore Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm complete all as specified. (Make : Polyplast/Priya/Symet).

All as per item No.59 hereinbefore but supply only 40 mm bore complete all as specified and directed.

S&F in repairs PVC connection 450 mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified. Make : Polyplast/Prayag/Symet

All as per item No.61 above but 600mm long ditto.

All as per item No.61 above but 900mm long ditto.

S&F in repairs suitable for 15mm dia brass chromium plated pillar tap fancy type with fly nuts capstan head screwed down high pressure with or without lettered hot or cold with long screwed shank complete all as specified. (Make : ZIM/PARKO/Seiko).

S&F in MS bracket for kitchen sink/Wash hand basin including necessary nut and bolts , painting on brackets etc as per existing one at site complete all as specified.

S & F in repairs 15mm dia Brass CP mixer for wash hand basin, mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed.

S & F in repairs 15mm dia Bib taps, cast copper alloy with crutch or butterfly handle, chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

Supply only brass spindle/phase suitable for 15mm dia bib cock, stop cock, concealed stop cock, angle cock, wall mixture, basin mixture etc of any type or size complete all as specified and directed.

S & F in repairs stainless steel soap dish complete all as specified and directed Make : Jaquar/Hindware/Gim

All as per item No 69 above but long body ditto.

S&F in repairs CP brass shower rose 80 mm size suitable for 15mm bore pipe (Make : ZIM/PARKO) complete all as specified.

S&F in repairs stainless steel plate rack of size 50 x 75 cm and 18 depth size made out of 0.80mm thick sheet complete all as specified.

S&F stainless steel sink with drainage board made out of 1.00 mm thick sheet for kitchen with plug, washers, waste pipe incl fixing cast iron cantilever bracket connecting union over all size 600 x 450 x 200 mm single bowl mm complete all as specified (Make : Neelkanth/Diamond/Nirali/Jena)

S&F in repairs mild steel chromium plated grating (round) 125mm dia fixed over floor/nahani trap (with hole and without hole)complete all as specified.

S&F in repairs chromium plated brass stop cock fancy type screwed both ends high pressure for 15mm bore size iron pipe or ferrule complete all as specified . (Make : ZIM/PARKO)

All as per item No 75 above but with long shank and cup (concealed type) ditto.

All as per item No 75 above but angle cock ditto.

S & F in repairs 15mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified

S & F in repairs 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified

S&F in repairs of 15mm bore size PTMT bib tap complete all as specified. (Make : Prayag/ Polytuf/Symet).

S&F Rotational moulded polyethylene 1000 Ltr capacity water storage tank triple layered WHITE (Cylindrical vertical with closed top )composite type or lid should be thread type) hoisted and fixed in position with 20mm dia brass float valve complete including ball valve and tank connection complete including dismantling of pvc tank complete all as specified Make -Sintex/Polywell/Polycon(ISI marked only)

All as per item No 81 above but storage capacity 500 Ltrs

S&F in repairs HDPE PVC lid (cover) for 1000 Ltrs capacity PVC tank complete all as specified (Make : Syntex/Rotex).

All as per item No 83 but for 500 Ltrs capacity complete all as specified.

S & F in repairs 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, waste and vent pipes in any length with or without ears, fixed to walls all as specified and directed.

S & F in repairs 100mm dia sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed in laid in floors/trenches etc all as specified and directed including taking down old pipes in any position complete.

S & F in repairs 75mm dia sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall etc all as specified and directed including taking down old pipes in any position complete.

Taking down and up of old steel tubing connection in new or old position (wall etc) incl cleaning for refixing, bore of pipe 15mm bore complete all as specified.

All as per item No 88 above, but 20mm bore complete all as specified.

Refixing old steel tubing and connection in new or old position(walls, ceiling, floors etc.) for 15mm bore GI all as specified

Refixing old steel tubing and connection in new or old position(walls, ceiling, floors etc.) for 20mm bore GI all as specified

M&L for GI tubing ISI marked medium grade 15mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified .

All as per item No 92 here-in-before but 20mm bore complete all as specified.

S & F Cast iron Bends of 100mm dia (any radius), diminishing pieces or tapers (larger bore measured) etc all as specified and directed.

S & F cast iron Bends of 75mm dia (any radius), diminishing pieces or tapers (larger bore measured) etc all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks of capacity exc. 250 litres but n exc. 500 ltrs and from mouths of circulating pipes, etc and applying bleaching powder for cleaning on tanks all as specified and directed.

All as per item No 96 here-in-before but capacity exc. 500 ltrs and n exc. 1000 ltrs complete all as specified.

M & L for in repairs Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof upto G+3 stories for 100 mm dia pipes all as specified and directed.

All as per item No 98 here-in-before but 75mmdia ditto complete all as specified.

S & F Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) 75mm outer dia all as specified and directed.

S & F PVC SWR Bends of 110mm dia (any radius), diminishing pieces or tapers (larger bore measured) etc all as specified and directed.

S & F PVC SWR Bends of 75mm dia (any radius), diminishing pieces or tapers (larger bore measured) etc all as specified and directed.

S & F PVC SWR junction single, (Single T) equal or unequal 110mm dia with access door all as specified and directed.

S & F PVC SWR junction single, (Single T) equal or unequal 75mm dia with access door all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F in repairs mild steel 200mm, ordinary helical door spring including roller and roller plate fixed to wooden/steel chowkats with necessary bolts, etc. Complete all as specified and directed.

Supply only PVC siphon(Make : super flush/parryware/hindware) complete for low level flushing cistern complete all as specified

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, metal frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads or including punching or drilling out old glazing pins/spring clips all as specified and directed

S & F Sheet glass, 3mm thick ordinary quality, in squares n exc. 0.50 sq. m each pane glazing with oil putty or glazing clips or wooden beadings, aluminium beadings etc all as specified and directed.

S & F Sheet glass, 4.80mm thick ordinary quality, in squares but exc. 0.50 sq. m each pane glazing with oil putty or glazing clips or wooden beadings, aluminium beadings etc all as specified and directed.

S&F in repairs PVC mirror cabinet of size 500X400X120mm fancy type fixed with 4 Nos stain less steel clips complete all as specified.

S & F in repair Glass Corner Shelf 10mm thick including CP railing radius 300mm radius complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs sheet glass shelf assembly consisting of 5.50 mm thick sheet glass shelf 12 cm wide with chromium plated brackets guard and railing 60 cm long complete all as specified

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, over all length o cover plate is 140 mm complete all as specified and directed.

S&F mild steel barrel tower bolts, stove enamelled black with bright bolts and fixed 200mm long bolts in repair complete all as specified

S&F mild steel barrel tower bolts, stove enamelled black with bright bolts and fixed 150mm long bolts in repair complete all as specified

S&F MS pressed handles oval type stove enamelled black, 150mm size as in repair complete all as specified.

S&F in repairs Aluminium sheet 0.5 mm thick, fixed with aluminium alloy screws complete all as specified.

M & L for Welding in repairs exe 2.5cm but n. exc. 5.00 cm in length Thickness of Metal to be welded is exc. 6mm thick but n exc. 9.00 mm thick all as specified and directed.

S&F in repairs 300mm long aluminium alloy anodised sliding door boll with hasp staple belt-type and fixing clips of sheet case or extruded sections and fixing bolls and sliding bolls extruded sections or case aluminium alloy complete all as specified and directed

S&F in repair 150mm long extruded aluminium alloy handle fabricated type anodized (D type) complete all as specified and directed.

S&F in repair 150 mm size aluminium, anodised barrel tower bolts of extruded section and fixed to shutter complete all as specified and directed

S&F in repair 150mm long aluminium anodized hasp and staple safety type fixed with mild steel chromium plated screws to shutters complete all as specified.

S&F in repairs flush handle PVC with adjustable lever and hook for low level flushing cistern all as directed.

Repairs to steel windows by straightening, welding of damaged portions, box or "Z" type steel hinges, greasing & oiling to make functional like easy for closing and opening etc area of window exc. 1.00 sqm but n exc. 2.00 sq. m each all as specified and directed.

Renewing tiles in patches, area n exc. 5.00 sq. m including removing ,cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles of glazed /non skid ceramic tiles white /coloured as per the existing tiles and size as suitable/matching with the existing tiles in dados/floors including necessary cement work/white cement painting complete all as directed by Engr-in-Charge. ( Make : Orient/Somany/Kajaria )

M&L applying two coats of oil bound distemper over a coat of priming coat over a coat of wall care putty averaging 1.50 mm thick to bring surfaces even and smooth on new plastered surfaces complete all as specified and directed.

M&L finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade on new work using two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.2 kg/10 sqm complete with and including wall care putty averaging 1.50 mm thick to bring surfaces even and smooth on new plastered surfaces all as specified and directed.

M & L for laying 50mm average thickness PCC 1 : 2 : 4 type B1 using 20mm graded crushed stone aggregate, finished even and smooth with out using extra cement incl roughening old surfaces applying cement slurry @ 3.00 Kg/Sqm etc complete all as directed and specified.

M & L cement concrete 1 : 2 : 4 type B1 using 20 mm graded stone aggregate as in roof kerb mud stop etc complete all as directed and specified.

S&F 50mm wide 3 to 6mm thick rubber beading fixed to door shutter with nails as in repair all as specified.

S&F in repairs curtain bracket suitable for 19mm bore curtain rod complete as in repair complete all as specified.

S&F in repairs 300mm MS sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple late complete all as specified.

M&L 20 mm thick granite stone slab of any type with table rubbed and polished in cooking platforms and like set in cement mortar 1:4, including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete all as specified and directed.

M&L moulding/grinding edges of granite stone including rubbing and polishing complete all as specified.

S&F in repairs Drapery curtain rods 25mm dia with two number brackets/holders fixed in brick/concrete wall and decorative knobs on each end of curtain rod complete all as specified and directed.

S&F in repairs angle valve two way, cast copper alloy, chromium plated fancy type of size 15mm bore, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.

M&L for Non skid ceramic floor tiles 7 to 8 mm thick (square/rectangular) coloured , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match laid over screed bed or bedding layer in cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and directed.

M&L for Glazed ceramic walls tiles coloured (300 x 200 mm/350x250mm/450x300mm/300x450), 6/7mm thick, for works on vertical surfaces such as skirting/dados of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick on fair faces or other than fair faces of brick work in cement mortar 1:4, finished even and fair as in backing layer complete all as specified and directed.

All as per item No 140 above but in vertical surfaces such as dado/skirting etc laid over and including rendering 10 mm thick in CM 1:4 complete all as specified and directed.

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m. each.

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm but not exceeding 4.0 Sq.m. each.

Taking down shutters of any description exc. 1 sqm and n.exc. 2 sqm each .

M&L mild steel framed work as in doors or gates angle or other section with gusset plates, rails, braces etc complete drilled for fixing steel sheeting or other covering doors etc complete all as specified and directed, steel conforming to Fe 410 W (Gde E-250 quality A).

Stainless steel fastener of size 200 to 250mm for fixing wooden door frame and like in position

MS flat iron as in hold fast, bands, straps, supports or stays for rain water, ventilating pipes, including bolts, if required hook (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains, hand made sliding bolts; clamps; hold fasts; wall ties, hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two-way and three way straps, plate washers and similar small articles conforming to Fe-290Gde-E-165 all as specified and directed.

M&L PCC 1:2:4 type B-1 (20mm graded agg.) as in anchoring hold fast etc bed plate etc all as specified and directed.

M&L factory made 2nd class hard wood 35mm thick glazed and skeleton door shutters, open rebated and prepared to receive glass, gauge etc( without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, fixed to chowkats, sizes of members of shutters as specified and directed.

M&L 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side with teak wood lipping on edges of shutter all as specified and directed.

S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying and fixing in opening as per specification and drawing.

S&F Factory made solid PVC moulded door shutters (with particle board core), 28 to 30mm thick (Stiles) with 2, 4, or 6 raised panel (as ordered) design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face, supply and fixing in frame at site as per the specification and drawing.

S&F Stainless steel butt hinges of size 100mm fixed complete all as specified.

M&L cleaning/removing of blockage of floor traps, nahani traps, gully traps, manholes, flushing of chocked and de-silting of outdoor sewage lines n.exc. 300mm internal diameter of any depth upto three meter . The cleaning shall be carried out with mechanized operation by means of diesel/electric operated vehicle mounted hydraulic operated high pressure suction cum jetting machines fitted with pump of requisite capacity and the sludge sucked out with super sucker machine of required capacity and sent to storage tanks for further disposal to the authorised disposal sites. The sludge deposited in the sewage line shall be fully cleaned and disposed off the same outside the MoD land at any distance and without any additional cost on the same day when it was taken out. The job shall be carried out with safety precaution equipment and with strict supervision complete all as directed. Note:- (a) The service provider/contractor during the mechanized operation shall be equipped with gas monitor, nylon rope ladder, torch light and compressor blower etc alongwith the sewage cleaning truck mounted suction/jetting machine. (b) Manual cleaning operation/scavenging is prohibited. (c) The unit rate quoted by the contractor shall interalia deem to include the cost of providing skilled driver and operator and supervising Engineer including provision of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc (d) The effective length of pipe for the purpose of payment shall be excluding the length of manhole.

Desludging of existing chocked manholes of depth upto 2.5 m for liquid, solids and slurry material by mechanical means using hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of minimum 5000 Ltr and suction tank capacity of 300 Ltrs and 260 LPM with minimum 145 bar suction flow of 10200 LPM including skilled driver and operator and supervising Engineer including provision of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc outside the MOD land/premises at any distance all as directed by Engr-in-Charge including loading, unloading, digging out pit of any size in any type of soil, slurring sludge/silt/spoil/mud etc into the pit and spraying bleaching powder over the entire surface complete including taking of the manhole cover for the entire process as above and replacing the manhole cover in its position. Note :- (a) The service provider/contractor during the mechanized operation shall be equipped with gas monitor, nylon rope ladder, torch light and compressor blower etc alongwith the sewage cleaning truck mounted suction/jetting machine. (b) The cleaning shall be carried out with mechanized operation by means of jetting machines and the sludge sucked out with super sucker machine of required capacity and sent to storage tanks for further disposal to the authorised disposal sites. (c) Manual cleaning operation/scavenging is prohibited. (d) The unit rate shall deem to include for all material, labour (skilled/unskilled), tools and plants and requisite quantity of water for the entire operation and transportation arrangements. (e) The sludge so removed shall include the cost of dewatering also.

S&F precast polycrete plastic fibre reinforced concrete(PFRC) rectangular manhole cover (medium duty) with 60 to 75 mm thick, confirming to IS: 12592 and IS:1726, factory made area exc. 0.50 sqm but n exc. 0.75 sqm on any side complete all as specified and directed by Engr-in-charge.

S&F in repairs PVC chajja (Factory made) exc. 0.20 sqm and not exc. 0.60 sqm fixed with steel fasteners 150mm long complete all as specified and directed in building upto four storey height buildings including dismantling existing RCC chajjas and removal of malba out side MoD land complete. PVC chajjs shall confirm to the sample approved by Garrison Engineer .

S&F powder coated aluminium frame / guiding rail for sliding or side hung windows/ventilators and incl. for sliding shutters with one or more rebates incl. necessary joining cleats, rubber gasket/beading glazing clips for fixing, etc complete all as specified.

S&F powder coated aluminium glazed/gauzed door, window and ventilators shutters, side hung type( or sliding type) without sash bars, aluminium section weighting 0.55 kg per mtr including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws including fittings such as peg stays 150mm long (2 Nos) to each leaf, hinges 100mm long (2 Nos) each leaf and suitable handle (1 no.) to each leaf and locking arrangement complete all as specified.

S&F Steel windows with side hung shutters including projecting type/box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified & directed.

S&F Steel windows with side hung shutters including projecting type/box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for complete removal of old treated wall surfaces by mechanical scrapper and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 5489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 Litre/sqm over and including priming coat of exterior primer applied @ 0.90 litre/sqm over old surfaces including application of a coat of putty 1 mm thick over plastered surfaces to prepare the surface even and smooth complete all as specified.

M&L for complete removal of old treatment of surfaces of wall by mechanical grinder and applying two coats of Oil bound distemper over a coat of primer over & including applying wall care putty to achieve even , smooth and uniform surface complete all as specified & directed.

M&L applying one coat of oil bound distemper on plastered or unplastered old surfaces including preparation of old painted surfaces complete all as specified and directed.

M&L preparation of old painted surfaces of walls of any description and applying one coat of weather coat exterior emulsion paint of approved shade complete all as specified.

M& applying one coat of synthetic enamel paint on old painted wooden surfaces of any description complete all as specified.

M& applying one coat of synthetic enamel paint on old painted steel surfaces of any description complete all as specified.

BEHAL TRADERS

B S R Enterprises

Dharma Enterprises