Special repair and painting/whitewashing work of the Other Backward Classes (OBC) Hostel located at U.R. College, Rosera, under Samastipur district.

B.O.Q. OF S/R WORK OF OBC & EBC WELFARE HOSTEL BUILDING IN THE CAMPUS OF U.R. COLLEGE ROSERA AND INSTALLATION OF 300 MM DIA 111.25 MTRS DEEP GRAVEL PACKED BORING WITH SUBMERSIBLE MOTOR PUMP IN DIST SAMASTIPUR FOR THE YEAR 2025 - 2026

Estimated Cost:- Sold to :-

Earnest Money :- M/R No.:-

Cost of B.O.Q:- Date:-

Date of Tender :-

Date of Completion :-

SI SOR Reference Item of works Quantity Unit Rate Amount

1 15.56 Dismantling old plaster or skirting rakingout joints and cleaning thesurfaceforplaster includingdisposalofrubbishtothedumping ground within 50 metres lead. 620.61 sqm 21.70 13467

2 13.11.4 Cement plaster in course sand 12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand) 348.54 sqm 141.50 49318

3 13.24.2 6 mm cement plaster to ceiling of mix :1:4(1 cement: 4 coarse sand) 52.41 sqm 125.60 6583

4 13.12.4 15 mm cement plaster on rough side of single or half brick wall of mix. 1:6 (1 cement: 6 coarse sand) 118.98 sqm 162.60 19346

5 13.11.1 Cement plaster in course sand 12 mm cement plaster of mix: 1:3 (1 cement:3 coarse sand) 100.69 sqm 173.30 17449

6 15.23.1 Dismantling tilework in floors and roofs laid incementmortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 540.84 sqm 30.70 16604

7 11.36 Providingandfixing1stqualityceramicglazedwall tilesconformingto IS:15622(Thicknesstobespecifiedbythemanufacture)ofapproved make inall colours, shadesexceptburgundy,bottlegreen,blackof anysizeasapprovedbyEngineer-in-chargeinskirting, risersofsteps anddadosover 12mmthickbedof cementMotar 1:3(1cement: 3 coarsesand)andjointingwithgreycement [email protected] includingpointing inwhitecementmixedwithpigment ofmatching shade complete. 422.55 sqm 795.00 335927

8 11.38 ProvidingandlayingCeramicglazedfloor tiles300x300mm(thickness tobespecifiedby themanufacturer) of ist qualityconforming to IS: 15622ofapprovedmakeincolourssuchshadesexceptwhite, Ivory, Grey,FumeRed,Brown, laidon20mmthickCementmotar1:4(1 cement:4coarsesand) includingpointingthejointswithwhitecement and matching pigment etc., complete. 118.29 sqm 862.40 102013

9 N.S Providing & fixing Velosit WP 124 for this apply ist coat of Water proofing slunzy on the wallet slab joint end immediately place the tape over it and press it into the still wet, Blurry doende all complete Job. 134.40 m 827.00 111149

10 N.S Water proofing Application on surface-After the entire wall Slab treatment has been completed, providing and applying Velosit wp 124 on the prewetted concreter sundele with a [email protected] kg/ML in two coats in a creps cropp application de de ha all complete Job. 203.04 sqm 145.00 29441

11 14.7.1 Renewing glass panes and refixing existing wooden fillets: Floatglasspanesof thickness4mm(weightnot lessthan 10kg/sqm) 174.55 sqm 770.60 134508

12 9.1.4 Providingwoodworkinframesofdoors,windows,clerestorywindowsand other frames,wrought framedand fixed inpositionwithholdfast lugsor with dash fasteners of required dia& length ( hold fast lugs or dash fastener shall be paid for separately). 1.305 cum 54628.9 71291

13 9.21.2 ProvidingandfixingISImarkedflushdoorshuttersconformingtoIS:2202 (Part I)non-decorativetype,coreofblockboardconstructionwithframeof1 st classhardwoodandwellmatchedcommercial 3 plyveneeringwith vertical grains or cross bands and face veneers on both faces of shutters: 96.50 sqm 1641.50 158398

14 15.12.1 Desman tilingdoorswindowsand clerestorywindows (steel or wood) shutters including chowkhats, architrage, holdfasts etc. complete and stacking within 50 metres lead: 34.00 nos 151.80 5161

15 9.143 Providing and Fixing factorymade uPVCdoor frame, made of uPVC exturdedsections,ofsize65mmx55mmwithwall thickness2.0mm(± 0.2mm) , cornersof thedoor frame tobemitredcut and jointed with plasticbracketsandstainlesssteelscrews,reinforcinghingesideverticalof the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm(±0.2mm), includingproviding&fixing3nosof125mmlongstainless steelhingestotheframe, fixingtheframewithjambwithrequired number & size of anchor dash fastners, all complete as per manufacturer’s specification and direction of Engineer-in-charge. 50.29 m 516.80 25990

16 9.144 Providing and fixing 37 mm thick factory made PVC door shutter, styles and railsmadeof PVChollowsectionof size100mmx 37mmwithwall thickness2mm(±0.2mm),withinbuiltbeadononeside,stylesandrails miteredcutandjointat thecornersbymeansof2nosofplasticbracketsof size75mmPVCprofileofsize28mmx30mm,withwall thickness2mm( ±0.2mm).Lockrailofsize100mmx37mm,wall thickness2mm(±0.2 mm)will be fixed to thevertical styles.ProvidingwithPVCsnapfitbeads andpanelofsize100mmx20mm,andinserting2nostiebarof6mmdia andfasteningwithnutsandwasherscomplete, all aspermanufacturer’s specification and direction of Engineer-incharge. 16.24 sqm 3492.80 56722

17 9.96.2 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm 34.00 nos 210.10 7143

18 9.97 Providingandfixingaluminiumtowerbolts, ISImarked, anodised(anodic coatingnot lessthangradeAC10asperIS:1868), transparentordyedto required colour or shade, with necessary screws etc. complete:

19 9.100.1 Providing and fixing aluminiumhandles, ISI marked, anodised (anodic coatingnot lessthangradeAC10asper IS:1868) transparentordyedto required colour or shade, with necessary screws etc. complete: 160.00 nos 57.10 9136

20 9.101.1 Providingand fixingaluminiumhanging floor door stopper, ISImarked, anodised (anodiccoatingnot less thangradeAC10asper IS : 1868) Single rubber stopper transparentordyedtorequiredcolourandshade,withnecessaryscrews etc. complete. 100.00 nos 34.00 3400

21 12.78 Providingand fixingonwall faceunplastidsed-PVC(workingpressure4kgf persqm) rainwaterpipesconformingtoIS:4985includingjointingwithseal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

22 12.79 Providing and fixing on wall face unplasticised-PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985includingjointingwithseal ringconformingtoIS:5382leaving10mm gap for thermal expansion.

12.79.3.1 Single tee with door 75x75x75 mm 30.00 nos 141.60 4248

12.79.3.2 Single tee with door 110x110x110mm 60.00 nos 193.40 11604

23 12.8 Providing and fixing unplasticised-PVCpipe clip of approved design to unplasticisedPVC rainwater pipebymeans of 50x50x50mmhardwood plugs, screwedwithM.S. screwsof required length includingcuttingbrick workand fixingoncementmortar(1:4) 1cement: 4corsasandandmaking good the wall etc complete

24 13.80 Removingdryoroilbounddistemperbyscrapping,sandpaperand preparing thesurfacesmooth includingnecessary repari scratches tec. Gmplete 7708.34 sqm 9.70 74771

25 13.77.2 Distemperingwithoilboundwashabledistemperofapprovedbrand and manufacture to give an even shade .New work (two or more coats ) over and including priming coat with cement primer 400.95 sqm 102.80 41217

26 13.77.3 Distemperingwithoilboundwashabledistemperofapprovedbrand and manufacture to give an even shade .Old work (one or more coats) 5702.71 sqm 33.20 189330

27 13.79.1 Finishingwallswithwaterproofingcement paintof approvedbrand and manufacture and of required shade to give an even shade 118.98 sqm 81.20 9661

28 13.79.2 Finishingwallswithwaterproofingcement paintof approvedbrand and manufacture and of required shade to give an even shade 2005.62 sqm 61.10 122544

29 13.81.1 & 13.82.2 Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and softwood) & Paintingwithreadymixedpaintofapprovedbrandandmanufacture in all shades to give an even shade: New wood work (two or more coats) 241.13 sqm 123.20 29707

30 13.82.4 Paintingwithreadymixedpaintofapprovedbrandandmanufacture in all shades to give an even shade: Old wood work (one more coats) 364.67 sqm 54.10 19729

31 13.82.3 Paintingwithreadymixedpaintofapprovedbrandandmanufacture in all shades to give an even shade: Old steel work (one or more coats) 602.61 sqm 54.10 32601

32 15.2.1 Demolishingcementconcreteincludingdisposalofmaterialwithin 50 metre lead: 1:3:6 or richer mix 8.87 cum 970.90 8614

33 4.1.2 Providingand layinginpositioncement concreteof specifiedgrade exluding the cost of centring and shuttering-all work upto plinth level. 1:1.5:3(1Cement :1.5coarsesand:3gradedstoneaggregate20mm nominal size) 8.87 cum 4420.80 39220

34 17.7.2 Providing and fixing wash basin with size 630x450 mm C.I.brackets, 15mmC.P. brass pillar taps, 32mmC.P. brasswaste of standard pattern, including paintingof fittingsandbrackets, cuttingandmakinggood thewalls wherever require : 20.00 nos 2369.90 47398

35 17.1.1 White Vitreous chinaOrissa patternW.C. pan of size 580x440 mm with integral type foot rests 9.00 nos 4470.90 40238

36 17.13.1 Providingand fixingwhitevitreous chinawater closet squattingpan (Indian type) : Long pattern W.C. pan of size 580 mm 9.00 nos 1192.80 10735

37 17.16 (A) Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 9.00 nos 299.40 2695

38 17.18.1 Providingand fixingP.V.C. low level flushing cisternwithmanually controlleddevice(handlelever)conformingtoIS:7231,withall fittings and fixtures complete. 9.00 nos 905.50 8150

39 17.22 ProvidingandfixingG.I. inletconnectionfor flushpipeconnectingwith W.C. pan. 9.00 nos 131.60 1184

40 17.23 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. 12.00 nos 1024.90 12299

41 17.28.2.2 ProvidingandfixingP.V.C. wastepipeforsinkorwashbasinincluding P.V.C. waste fittings complete. 60.00 nos 104.40 6264

42 17.73 Providingand fixingPTMT towel rail completewithbrackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

17.73.1 450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of 88 mm, weighing not less than 170 gms 12.00 nos 397.30 4768

17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms 18.00 nos 424.00 7632

43 17.32.2 Providing and fixing mirror of superior glass Rectangular shape 453x357 mm (ofapprovedquality)andof requiredshapeandsizewithplasticmouldedframeofapprovedmake and shade with 6 mm thick hard board backing : 12.00 nos 857.00 10284

44 17.33 Providing and fixing mirror of superior glass Rectangular shape 600x120 mm (ofapprovedquality)andof requiredshapeandsizewithplasticmouldedframeofapprovedmake and shade with 6 mm thick hard board backing : 12.00 nos 713.30 8560

45 18.8 Providingand fixingChlorinatedPolyvinyl Chloride (CPVC) pipes, having thermal stability for hot &coldwater supply, includingall CPVCplain&brassthreadedfittings, includingfixingthepipewith clampsat1.00mspacing.This includes jointingofpipes&fittings withonestepCPVCsolventcementandtestingof jointscompleteas per direction of Engineer in Charge.

18.8.2 20 mm nominal outer dia Pipes 98.75 m 350.80 34642

18.8.3 25 mm nominal outer dia Pipes 60.25 m 463.10 27902

46 18.19 Providing and fixing gun metal non- return valve of approved quality (screwed end) :

47 18.19.1.1 25 mm nominal bore Horizontal 4.00 nos 506.60 2026

48 18.21.2.2 Providing and fixing uplasticised PVC connection pipe with brass ions : 20 mm nominal bore 60.00 nos 102.60 6156

49 18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter 18.00 nos 190.10 3422

50 18.48 Providingandplacingon terrace (at all floor levels) polyethylene water storage tank, ISI : 12701marked, with cover and suitable lockingarrangementandmakingnecessaryholesforinlet,outletand overflow pipes but without fittings and the base support for tank. 4000.00 ltr 9.70 38800

51 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 18.00 nos 434.20 7816

52 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15.00 nos 715.10 10727

53 18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 22.00 nos 708.40 15585

54 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 54.00 nos 594.80 32119

55 18.79 Makingholeup to20x20cmandembeddingpipesup to150mm diameterinmasonryandfillingwithcementconcrete1:3:6(1cement : 3 coarse sand 6 graded stone aggregate 20mmnominal size) including disposal of malba. 36.00 nos 115.70 4165

56 22.19.1 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofingmembrane, black finished reinforcedwithglass fibrematt consistingof acoat of bitumen primer [email protected] litre/ sqmbythesamemembrane manufacturedofdensityat25°C,0.87-0.89kg/ litreandviscocity70 160cps.Over theprimercoat thelayerofmembraneshallbelaidusing butane torch and sealing all joints etc., and preparing the surface complete. Thevital physical andchemical parametersof themembrane shallbeasunder:Jointstrengthinlongitudinalandtransversedirectionat 23°Cas350/300N/5cm. Tear strength in longitudinal and transverse directionas60/80N.Softeningpoint ofmembranenot less than150°C. Coldflexibilityshallbeupto-2°CwhentestedinaccordancewithASTM,D-5147.Thelayingofmembraneshallbegotdonethroughtheauthorised applicator of the manufacturer of membrane. 391.91 sqm 443.10 173655

57 Carriage of Material

a Kiul Sand 22.38 cum 2327.73 52095

b Stone Chips 7.63 cum 1805.00 13772

58 Extra cost of Material

a Cement 235.00 bag 5.50 1293

59 24.1.1.1 Boring/drillingborewell of requireddia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples fromdifferent strata, preparing andsubmittingstratachart/bore log, includinghire&running chargesofallequipments, tools,plants&machineriesrequired forthejob,allcompleteasperdirectionofEngineer-in-charge, upto 90 metre depth below ground level 111.25 m 486.80 54157

60 24.3.2 Supplying,assembling, loweringandfixinginverticalposition inborewell,unplasticizedPVCmediumwellcasing(CM)pipe ofrequireddia,conformingtoIS:12818, includingrequiredhire andlabourcharges, fittings&accessoriesetc.allcomplete, for all depths,as per direction of Engineer -in-charge. 96.25 m 660.10 63535

61 24.4.2 Supplying,assembling, loweringandfixinginverticalposition inborewellunplasticizedPVCmediumwellscreen(RMS)pipes with ribs, conforming to IS: 12818, including hire& labour charges, fittings&accessoriesetc.allcomplete, foralldepths, as per direction of Engineer-in-charge. 15.00 m 673.50 10103

62 24.8 GravelpackingintubewellconstructioninaccordancewithIS: 4097,including providing gravel fine/ medium/ coarse, in requiredgrading&sizesasperactualrequirement,allcomplete as per direction of Engineer-in-charge. 5.30 cum 1343.20 7119

63 24.12 Developmentof tubewell inaccordancewithIS:2800(part I) andIS:11189, toestablishmaximumrateofusablewateryield withoutsandcontent (beyondpermissiblelimit),withrequired capacityaircompressor, runningthecompressor for required timetillwell isfullydeveloped,measuringyieldofwellby"V" notchmethodoranyotherapprovedmethod,measuringstatic level&drawdownetc.bystepdrawdownmethod,collecting water samples &getting tested in approved laboratory, i/c disinfectionof tubewell, all complete,includinghire& labour chargesofaircompressor, tools&accessoriesetc.,allasper requirement and direction of Engineer-in-charge. 8.00 hours 916.80 7334

64 24.13.2 Providing and fixing suitable size 150 mm threadedmildsteel capor spotweldedplatetothetopofborewellhousing/casingpipe, removable as per requirement, all complete for borewell of: 1.00 nos 210.70 211

65 24.14.2 Providingand fixingM.S. 150 mm clampof requireddia tothe topof casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 1.00 nos 1531.40 1531

66 24.15.2 Providing and fixing Bail plug/Bottom plug of requireddiato the bottom of pipe assembly of tubewell as per IS:2800 (part I). 1.00 nos 281.80 282

67 24.11.2 Supplying,assembling, loweringandfixinginverticalposition inborewell, ERW(ElectricResistanceWelded) FE410plain slotted(havingslotofsize1.6/3.2mm)mildsteel threadedand socketed / plainbevel endedpipe (typeA) of requireddia, conformingtoIS:8110,of reputedandapprovedmake,having wall thicknessnot less than5.40mm, includingpaintedwith outsidesurfacewithtwocoatsofanticorrosivebitumesticpaint of approvedbrand andmanufacture,including hire& labour charges, fittings&accessories, all complete,foralldepths, as per direction of Engineer -in-charge. 2.70 m 1727.20 4663

68 N/S Supplying of 1 H.P. crompton gravel submersible pump stainer with all accossories for running condition 1.00 nos 16800.00 16800

ADD G.S.T. 5.36 % EXTRA Rs 143622

Executive Engineer

Samastipur Building Division