REPAIR AND PAINTING OF STEEL FURNITURE AT OFFICERS ACCN, MAIN BLDG, UNITS/EST ETC AT FORT WILLIAM UNDER GE (FW) KOLKATA

Amount

CHAIR CB STEEL WITH ARMS, DRAWING NO FD-75(M)

S&F Seat made out of 2nd class hard wood free from knots and cracks, woven with 2mm half round white cane plastic of superior quality in Godrej pattern and providing 3mm wide flat cane border around the seat and to be fixed with machine screw including French polishing with one or more coats in black shade on wooden frame as shown in drawing including replacement of old unserviceable seat complete all as specified and as directed.

All as per item No 1.01 here-in-before but back of chair CB steel with arms.

S&F Arm made out of 2nd class hard wood free from knots and cracks including French polished with one or more coats in black shade on wooden frame including replacement of old unserviceable arm as shown on drawing complete all as specified and as directed.

S&F PVC hard rubber shoe Standard quality of chair CB steel with arms as approved complete all as specified and as directed.

S&F PVC hard rubber plug top Standard quality of chair CB steel with arms as approved complete all as specified and as directed.

Replace of existing unserviceable / broken mild steel cleat (Stiffeners) below the seat made out of mild steel flat iron of size 12 x 3mm and 535mm long by smooth welding both side on existing frame complete all as specified and as directed.

Welding to broken joints of 25mm dia MS pipe with smooth gas welding complete all as specified and as directed . (Note- Welding of broken/cracked joints shall be measured as one number for one joint)

M&L Preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying one Coats of Synthetic Enamel Paint (First quality) in olive green/ Grey shade by spray painting complete all as specified and as directed. (NOTE: Surface/Patches affected by rust shall be treated with one coat of red oxide primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account)

CHAIR CB STEEL WITHOUT ARMS, DRAWING NO FD-75(M)

S&F Seat made out of 2nd class hard wood, free from knots and cracks, woven with 2mm half round white cane plastic of superior quality in Godrej pattern and providing 3mm wide flat cane border around the seat and to be fixed with machine screw including French polished with one or more coats in black shade on wooden frame as shown on drawing including replacement of old unserviceable seat complete all as specified and as directed.

All as per item No 2.01 here-in-before but back of chair CB steel without arms.

S&F PVC hard rubber shoe of Standard quality for chair CB steel without arms as approved complete all as specified and as directed.

S&F PVC hard rubber plug top Standard quality for chair CB steel without arms as approved complete all as specified and as directed.

Replace of existing unserviceable / broken mild steel cleat (Stiffeners) below the seat made out of mild steel flat iron of size 12 x 3mm and 485mm long by smooth welding both side on existing frame duly treated with one coat of red oxide primer complete all as specified and as directed.

M&L Preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying one Coats of Synthetic Enamel Paint (First quality) olive green/ Grey paint by spray painting complete all as specified and as directed. (NOTE: Surface/Patches affected by rust shall be treated with one coat of red oxide primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account)

BED HARD MAP, DRAWING NO: FD/E6/MAP/08(R)

Removing of old unserviceable pre-laminated particle board from head board of bed hard and S&F new head board of 18 mm thick pre-laminated medium density fibre board (ISI marked), both side Mysore teak shade (matt finish), exterior grade with PVC edging, fixed with screws and washers as per existing shape & size complete all as directed by Engr -in-charge.

-ditto- but for foot board

Welding to existing broken/cracked joints of bed hard and grinded for even and smooth gas welding complete all as specified and directed. (NOTE: Welding of broken/cracked joints shall be measured as one unit for one joint)

S&F in repair 8 mm dia bolts, nuts & washers and tightening the steel framing structure of bed hard as per drg and specifications complete all as specified and directed. (NOTE: One bolt, nut & washer shall be measured as one unit)

M&L Preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying one Coats of Synthetic Enamel Paint (First quality) olive green/ Grey paint by spray painting complete all as specified and as directed. (NOTE: Surface/Patches affected by rust shall be treated with one coat of red oxide primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account)

Removing of old unserviceable hard rubber shoe from leg and S&F with new one as per existing of approved quality complete all as specified and directed.

Removing of old unserviceable ply top from charpoy hardtop and S&F new 12 mm thick 7 ply BWR plywood, fixed with screws and washers as per existing shape & size complete all as directed by Engr -in-charge.

Charpoy GI pipe with ply top, Drawing No : FD-220R

Removing of old unserviceable ply top of charpoy GI pipe and S&F 12mm thick 7 ply BWR gde type BB securing with 6mm dia round head counter sunk bolts and nuts with washer stainless steel (08 Nos) as per existing shape and size complete all as directed by the Engr-in-Charge.

S&F Long Rail made of 32 mm bore (medium grade) galvanised iron pipe of Charpoy GI pipe incl taking out the existing unserviceable long rail complete all as specified and directed by the Engr-in-Charge.

Labour only Short rail, made of 32 mm bore galvanised iron pipe (medium grade) of Charpoy GI pipe retrieved against item No. 4.02 above incl taking out the existing unserviceable short rail complete all as specified and directed by the Engr-in-Charge.

Labour only Legs, made of 32 mm bore galvanised iron pipe (medium grade) of Charpoy GI retrieved against item No. 4.03 above, with and including 3 mm thick mild steel plate, welded to bottom of legs, projecting 5 mm peripherally outer dia of leg and provision clamps for MNF set, as per drawing and specification complete all as directed by the Engr-in-Charge.

S&F 32 mm bore galvanised iron three-way elbow (ISI marked) of Charpoy GI complete all as directed by the Engr-in-Charge.

S&F 32 mm bore galvanised iron check nut of Charpoy GI pipe complete all as directed by the Engr-in-Charge.

Welding to broken stiffener of charpoy GI and pipe grinded for even and smooth gas welding after proper tightening the complete frame complete all as directed by the Engr-in-Charge. (Note : Welding of each broken joints shall be measured as one number)

CHAIR WRITING MAP, DRAWING NO: FD/E6/MAP/12 & TP

Removing old unserviceable tapestry cloth of seat & back of chair writing MAP and M&L tapestry cloth as per existing and best quality (coat of tapestry cloth not less than Rupees 350/-RM) with black PVC gutter edging to be fixed with screw in frame as per existing shape & size or complete all as specified and as directed by Engineer-in-charge. Note :- 1. Seat and back shall be considered as one unit. 2. Tapestry cloth shall be as approved by the Engineer-in-charge before incorporation in work. 3. Purchase vouchers for tapestry cloth is required to be submitted.

S&F 12mm thick Moulded ply for Seat of chair writing MAP as per existing BWR gde branded and of approved quality with necessary screw including replacement of old one complete all as specified and as directed.

S&F 12mm thick Moulded ply for Back of chair writing MAP as per existing BWR gde branded and of approved quality with necessary screw including replacement of old one complete all as specified and as directed.

S&F 50mm thick foam cushion Seat for chair writing MAP as per existing shape & size of 40 density, including replacement of old one complete all as specified and as directed.

S&F 50mm thick foam cushion Back for chair writing MAP as per existing shape & size of 40 density, including replacement of old one complete all as specified and as directed.

S&F Arms of chair writing MAP made out of plastic coated arms in black color as per existing shape & size fixed with screws complete all as specified and as directed.

S&F PVC hard rubber plug top Standard quality of chair CB writing MAP as approved complete all as specified and as directed.

CHAIR COMPUTER REVOLVING (ALL TYPES), DRAWING NO: TP & FD/E6/MAP/01

Removing old unserviceable seat & back of tapestry cloth of chair computer and S&F tapestry cloth as per existing and best quality (coat of tapestry cloth not less than Rupees 250/-RM) with black PVC gutter edging to be fixed with screw in frame as per existing shape & size or complete all as specified and as directed by Engineer-in-charge. Note :- 1. Seat and back shall be considered as one unit. 2. Tapestry cloth shall be as approved by the Engineer-in-Charge before incorporation in work. 3. Purchase vouchers for tapestry cloth is required to be submitted.

S&F 12mm thick Moulded ply for Seat of chair computer as per existing BWR gde branded and of approved quality with necessary screw including replacement of old one complete all as specified and as directed.

S&F 12mm thick Moulded ply for Back of chair computer as per existing BWR gde branded and of approved quality with necessary screw including replacement of old one complete all as specified and as directed.

S&F leg (base plate) of best quality as per existing shape and size including replacement of old one complete all as specified and as directed.

S&F Castor wheel of best quality as per existing shape and size including replacement of old one complete all as specified and as directed.

S&F Hydraulic system of best quality as per existing shape and size including replacement of old one complete all as specified and as directed.

Removing old unserviceable foam cushion from seat and S&F 50mm thick foam cushion of 40 density covered with tapestry cloth of best quality in seat and back complete all as per drawing or directed by Engineer-in-charge.

Removing old unserviceable foam cushion from back and S&F 50mm thick foam cushion of 40 density covered with tapestry cloth of best quality in seat and back complete all as per drawing or directed by Engineer-in-charge.

Removing old unserviceable arms from chair revolving and S&F arms made out of plastic coated arms in black color as per existing shape and size complete all as per drawing or directed by Engineer-in-charge.

TABLE COMPUTER MAP, DRAWING NO: FD/E6/MAP/03 & TP

S&F Computer table top made out of 18 mm thick pre- laminated particle board grade one side natural teak faced including black color PVC edging all round the top as specified and shown on drawing including replacement of old one, complete all as specified and as directed.

S&F Key board tray of size 500mm x 465mm thick made out of 18mm pre-laminated particle board exterior grade for telescopic channel as per drawing including replacement of old one, complete all as specified and as directed.

S&F Drawer made out of 18mm pre-laminated particle board exterior grade for telescopic channel as per drawing with replacement of old one, complete all as specified and as directed.

S&F Nylon buffers according to shape and size as per drawing with replacement of old one, complete all as specified and as directed.

M&L Preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying one Coat of Synthetic Enamel Paint (First quality) olive green/ Grey paint complete all as specified and as directed. (NOTE: Surface/Patches affected by rust shall be treated with one coat of red oxide primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account)

Book Case Steel, (Drawing NO FD-90, FD-1028 & TP)

Replacement of unserviceable lock with new brass lock 6 lever with duplicate keys

Replacement of broken handle with chromium plated mild steel handle 100mm long fitted with screw as shown on drawing

Repair to existing sliding channel shelves with denting and greasing making functional for smooth running of Book Case steel.

S&F 3mm thick glass including replacement of old one complete all as specified and as directed.

M&L Preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying one Coat of Synthetic Enamel Paint (First quality) olive green/ Grey paint complete all as specified and as directed. (NOTE: Surface/Patches affected by rust shall be treated with one coat of red oxide primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account)

ALMIRAH STEEL (LARGE) WITH SHELVES/1/2H 1/2S, Drawing No F-67 (M), FD-1031, FD/E6/MAP/18 Dismantling /Taking out following old and un-serviceable Parts/ components of Almirah large (Steel) with shelves and supply and fixing of new Parts/ components of appropriate size and shape all as shown on drawing and as directed by the Engineer-in-charge :-

Welding to broken joints of top and bottom smoothly to make correct shape of size with Gas welding. (Note - Welding of broken /cracked joints shall be measured as one number for one joint)

S&F Steel Hinges in replacement as per existing pattern.

Replacement of existing unserviceable bottom base leg with new bottom base leg duly painted with two coats of synthetic enamel OG paint over a coat of red oxide metal primer. MS sheet of leg shall be 1.00mm thick sheet by welding after removing unserviceable leg as specified and shown on drawing.

Replacement of broken handle with chromium plated mild steel handle with fitting as shown on drawing and making functional of locking device.

Replacement of unserviceable lock with new mild steel lock 6 lever (brass lever) with duplicate keys.

Replacement of unserviceable key plate & cover with new key plate with cover and fixed with screws for smooth use of key as shown on drg.

S&F Inner side lock cover made out of 1.6mm Plain Black iron sheet after removing existing unserviceable lock cover as specified and shown on drawing.

Replacement of Cleats for shelves as per existing pattern.

Labour only for repair/denting/bending of shelf or shutter of Almirah large (Steel) with shelves as directed by the Engr-in-charge.

S&F Locking Device in replacement of old one.

M&L Shelf made out of 1 mm thick plain black iron sheet as per shape & size or as shown on drawing duly painted with two coats of synthetic enamel paint over a coat of red oxide metal primer.

M&L Preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying one Coats of Synthetic Enamel Paint (First quality) olive green/ Grey paint complete all as specified and as directed. (NOTE: Surface/Patches affected by rust shall be treated with one coat of red oxide primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account)

ALMIRAH STEEL (MEDIUM) WITH SHELVES/1/2H 1/2S Drawing No FD-1032, FD-243 Dismantling /Taking out following old and un-serviceable Parts/ components of Almirah medium (Steel) with shelves and supply and fixing of new Parts/ components of appropriate size and shape all as shown on drawing and as directed by the Engineer-in-charge:-

Welding to broken joints of top and bottom smoothly to make correct shape of size with Gas welding. (Note - Welding of broken /cracked joints shall be measured as one number for one joint)

S&F Steel Hinges in replacement as per existing pattern.

Replacement of existing unserviceable bottom base leg with new bottom base leg duly painted with two coats of synthetic enamel OG paint over a coat of red oxide metal primer. MS sheet of leg shall be 1.00mm thick sheet by welding after removing unserviceable leg as specified and shown on drawing.

Replacement of broken handle with chromium plated mild steel handle with fitting as shown on drawing and making functional of locking device.

Replacement of unserviceable lock with new mild steel lock 6 lever (brass lever) with duplicate keys.

Replacement of unserviceable key plate & cover with new key plate with cover and fixed with screws for smooth use of key as shown on drg.

S&F Inner side lock cover made out of 1.6mm Plain Black iron sheet after removing existing unserviceable lock cover as specified and shown on drawing.

Replacement of Cleats for shelves as per existing pattern.

Labour only for repair/denting/bending of shelf or shutter of Almirah med (Steel) with shelves as directed by the Engr-in-charge.

S&F Locking Device in replacement of old one.

M&L Shelf made out of 1 mm thick plain black CRCA iron sheet as per shape & size or as shown on drawing duly painted with two coats of synthetic enamel paint over a coat of red oxide metal primer.

M&L Preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying one Coat of Synthetic Enamel Paint (First quality) olive green/ Grey paint complete all as specified and as directed. (NOTE: Surface/Patches affected by rust shall be treated with one coat of red oxide primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account)

LOCKER BED SIDE (STEEL), Drawing No FD-1029 Dismantling /Taking out following unserviceable/ damaged Parts/ components of Locker bed side (Steel) and supply and fixing of new Parts/ components of existing specification and size to match as per drawing and as per sample, as directed by the Engineer-in-charge :-

Replacement of unserviceable existing locks with new MS locks 6 lever (brass lever) with duplicate keys as per existing.

Replacement of unserviceable key plate and cover with new key plate with cover and fixed with screws for smooth use of key as per existing.

Replacement of locking Device (As per existing device) and making smooth functional for lock

Replacement of unserviceable existing handle CP with new handle CP 100mm long as per existing.

Replacement of unserviceable existing hinges with new hinges as per existing.

Replacement of existing unserviceable bottom base leg with new bottom base leg duly painted with two coats of synthetic enamel OG paint over a coat of red oxide metal primer. MS sheet of leg shall be 1mm thick sheet as specified and shown on drawing.

Removing of existing unserviceable handle and fixed with new MS pressed handle oval type stove enameled 100mm long of pattern as approved complete all as specified and shown on drawing.

Replacement of existing unserviceable chromium plated rod with socket and fixed with new 20mm dia 1.6mm thick wall thickness chromium plated rod with socket in size and shape as specified and shown on drawing.

Material and labour for welding/repair/re-fixing of hinges/shutter of locker bed side (Steel) as directed by the Engr-in-charge.

M&L Preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying one Coats of Synthetic Enamel Paint (First quality) olive green/ Grey paint complete all as specified and as directed. (NOTE: Surface/Patches affected by rust shall be treated with one coat of red oxide primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account)

RACK STEEL ADJUSTABLE 5/6 TIERS, DRAWING NO -129(M), TP

S&F 8mm dia and 40mm long hexagonal round head bolts and nuts fixed to existing shelves of rack with replacement of old unserviceable nuts and bolts etc complete all as specified and as directed.

S&F 1mm thick MS sheet angle corner brackets of size 150mmx150mm of rack steel 5/6 tiers with HRH bolts and nuts of size 8mm dia x 40 mm long as in repair as shown on drawing complete all as specified and as directed.

S&F Mild steel shelves 1.25mm thick as per existing shape and size including two coats of Synthetic Enamel Paint (First quality) over a coat of red oxide /Zinc Chrome primer after preparation of surfaces with replacement of unserviceable shelves complete all as specified and as directed.

M&L Preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying one Coats of Synthetic Enamel Paint (First quality) olive green/ Grey paint complete all as specified and as directed. (NOTE: Surface/Patches affected by rust shall be treated with one coat of red oxide primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account)

TEAPOY VERANDAH, Drawing No : FD-255 & FD/E6/MAP/17

M&L Welding to existing broken/ cracked joints of teapoy verandah with smooth welding as per standard workmanship/ specification complete all as specified and as directed. (Note- Welding of broken/ cracked joints shall be measured as one number for one joint)

M&L Preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying one Coats of Synthetic Enamel Paint (First quality) olive green/ Grey paint complete all as specified and as directed. (NOTE: Surface/Patches affected by rust shall be treated with one coat of red oxide primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account)

S&F Hard rubber shoe as per existing of approved quality including taking down old one complete all as specified and as directed.

S&F 18mm thick pre-laminated MDF board exterior grade one side natural teak faced including black color PVC edging all round the top as shown on drawing including taking down old one complete all as specified and as directed.

TABLE BED SIDE (MAP), Drawing No FD/E6/MAP/15(R) Removing of old unserviceable parts and supply/replace the same parts with new parts to match with existing and fixing the same without disturbing the other parts and making functional of table bed side as per drg and specification.

S&F replacement of top with 18mm thick pre-laminated MDF board exterior grade one side natural teak faced including black color PVC edging all round the top as shown on drawing complete all as specified and as directed.

S&F Pull out tray small made of 18mm thick pre-laminated MDF board exterior grade one side natural teak faced (Rear and front sides) and 6mm thick commercial ply of BWR grade for bottom with recess handle of approved quality to pull out the tray as per drawing and specification including replacement of old one complete all as specified and directed.

S&F Pull out tray large made of 18mm thick pre-laminated MDF board exterior grade one side natural teak faced (Rear and front sides) and 6mm thick commercial ply of BWR grade for bottom with recess handle of approved quality to pull out the tray as per drawing and specification including replacement of old one complete all as specified and directed.

Replacement of existing unserviceable side pre-laminated particle board and S&F 18mm thick pre-laminated MDF board exterior grade one side natural teak faced as per drawing and specification complete all as specified and as directed.

M&L Preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying one Coats of Synthetic Enamel Paint (First quality) olive green/ Grey paint complete all as specified and as directed. (NOTE: Surface/Patches affected by rust shall be treated with one coat of red oxide primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account)

Removing of old unserviceable had rubber shoe from leg and S&F hard rubber shoe as per existing of approved quality complete all as specified and as directed.

TABLE OFFICE OFFICERS STEEL, Drawing No : FD-84(M), FD-1003 Dismantling /Taking out following old and un-serviceable Parts/components of table office officers steel and supply and fixing of new Parts/ components of appropriate size and shape all as shown on drawing and as directed by the Engr-in-charge.

Replacement of existing unserviceable top of table with new top 18mm thick pre-laminated MDF board exterior grade one side natural teak faced including 4mm thick teak wood beading all round as specified and shown on drawing.

Repair to unserviceable drawer with denting/bending /welding for smooth functioning of drawer with channel as per existing shape & size or as shown on drawing.

Removing existing unserviceable locks of drawers of table steel and fixed with new locks brass lever with duplicate keys as approved and shown on drawing.

Removing existing unserviceable rubber shoes of table legs and fixed with new hard rubber shoes to legs as approved and shown on drawing.

Welding to broken joints of steel frame of table smoothly with gas welding. (Note- Welding of broken/cracked joints shall be measured as one number for one joint)

M&L Preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying one Coats of Synthetic Enamel Paint (First quality) olive green/ Grey paint complete all as specified and as directed. (NOTE: Surface/Patches affected by rust shall be treated with one coat of red oxide primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account)

TABLE OFFICE CLERK STEEL/TABLE TYPIST STEEL, Drawing No : FD-84(M), FD-1004 Dismantling /Taking out following old and un-serviceable Parts/components of table office clerk/typist steel and supply and fixing of new Parts/ components of appropriate size and shape all as shown on drawing and as directed by the Engr-in-charge :-

S&F 18mm thick pre-laminated MDF board exterior grade one side natural teak faced including 4mm thick teak wood beading all round as specified and shown on drawing including replacement of old one complete all as specified and as directed.

Repair to unserviceable drawer with denting/bending /welding for smooth functioning of drawer with channel as per existing shape & size or as shown on drawing complete all as specified and as directed by Engr-in-charge.

Removing existing unserviceable locks of drawers of table steel and fixed with new locks brass lever with duplicate keys as approved and shown on drawing complete all as specified and as directed by Engr-in-charge.

Removing existing unserviceable rubber shoes of table legs and fixed with new hard rubber shoes to legs as approved and shown on drawing complete all as specified and as directed by Engr-in-charge.

Welding to broken joints of steel frame of table smoothly with gas welding complete all as directed by Engr-in-charge. (Note- Welding of broken/cracked joints shall be measured as one number for one joint)

M&L Preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying one Coats of Synthetic Enamel Paint (First quality) olive green/ Grey paint complete all as specified and as directed. (NOTE: Surface/Patches affected by rust shall be treated with one coat of red oxide primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account)

TABLE DINING Ors, Drawing No : FD-165 Dismantling/taking out following unserviceable /damaged parts/ components of table dining OR's and supply & fixing new parts/ components, to be fitted all as shown on drawing and as per sample :-

S&F Table top, made of 19mm/20 mm thick particle board exterior grade, covered with 22 gauge aluminium sheet, as specified and shown on drawing including replacement of old one complete all as specified and as directed.

M&L Long rail/ stiffener made of 25mm x 25 mm MS square tube of 16 gauge, duly welded, including applying two coats of black synthetic enamel paint over a coat of red oxide primer, as directed by the Engr-in-charge.

M&L Short rail/ stiffener made of 25mm x 25 mm MS square tube of 16 gauge duly welded, including applying two coats of black synthetic enamel paint over a coat of red oxide primer as directed by the engr-in-Charge.

M&L Leg, made of 25mm x 25 mm MS square tube of 16 gauge, duly welded including applying two coats of black synthetic enamel paint over a coat of red oxide primer, as directed by the Engr-in-Charge.

S&F Hard rubber shoe, suitable for table dining OR's as in repair complete all as directed by the Engr-in-Charge.

M&L Spot welding to any joints of legs, stiffeners, rails etc of table dining OR's complete all as directed all as directed by the Engr-in-Charge. (Note - Welding of broken/ cracked joints shall be measured as one number for one joint)

M&L Preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying one Coats of Synthetic Enamel Paint (First quality) olive green/ Grey paint complete all as specified and as directed. (NOTE: Surface/Patches affected by rust shall be treated with one coat of red oxide primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account)

CHAIR SCHOOL WITH HAND BOARD, DRAWING NO FD/E6/MAP/05 & 6(R)

S&F PVC moulded seat and back to chair school with hand board including removing of old unserviceable moulded seat & back from the existing chair as per drawing and specification complete all as specified and as directed.

S&F Hand board made out of 18mm thick pre-laminated particle board exterior grade including PVC edging all round from the existing chair as per drawing and specification complete all as specified and as directed.

M&L Preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying one Coats of Synthetic Enamel Paint (First quality) olive green/ Grey paint complete all as specified and as directed. (NOTE: Surface/Patches affected by rust shall be treated with one coat of red oxide primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account)

FORM WITHOUT BACK DRAWING NO FD-77(M)

Removing unserviceable seat form without back including legs, stiffeners and S&F new parts by welding/providing nut and bolts as per drawing and specification complete all as specified and as directed. (Note : 25 mm square tube (16 gauge) and seat plank shall be measured as supply only under relevant items.

Supply only teak wood seat plank 1800x255x25mm for form without back

Supply only 25mm square tube (16mm gauge) for form without back

M&L Preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying one Coats of Synthetic Enamel Paint (First quality) olive green/ Grey paint complete all as specified and as directed. (NOTE: Surface/Patches affected by rust shall be treated with one coat of red oxide primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account)

FORM WITH BACK, DRAWING NO FD-78 (M)

Removing unserviceable seat form with back including legs, stiffeners and S&F new parts by welding/nut and bolts as per drawing and specification complete all as specified and as directed. (Note : 25 mm square tube (16 gauge) and seat plank shall be measured as supply only under relevant items)

Supply only teak wood seat plank 1800x255x25mm for form with back

Supply only teak wood plank for back size 1800 x 150 x 25mm for form with back

Preparation of existing polish from wooden surfaces and M&L French polishing of Form with back with high clear glossy finish French polish approved quality including preparation of the surface by putty work and smoothening the visible surface with sand paper complete all as specified and as directed.

M&L Preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying one Coats of Synthetic Enamel Paint (First quality) olive green/ Grey paint complete all as specified and as directed. (NOTE: Surface/Patches affected by rust shall be treated with one coat of red oxide primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account)

Rack Shoe Steel , Drawing No. FD/E6/MAP/02 (R)

M&L Preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying one Coats of Synthetic Enamel Paint (First quality) olive green/ Grey paint complete all as specified and as directed. (NOTE: Surface/Patches affected by rust shall be treated with one coat of red oxide primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account)

Chair Verandah (MAP), Drawing No : FD/E6/MAP/11

M&L Preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying one Coats of Synthetic Enamel Paint (First quality) olive green/ Grey paint complete all as specified and as directed. (NOTE: Surface/Patches affected by rust shall be treated with one coat of red oxide primer before application of paint. Quoted rate shall be deemed to inclusive of the fact and no extra claim shall be admissible on this account)

VISHWAS ENTERPRISES

M/S CHANDER SHEKHAR