GE I R AND D/CHD-19/2023-24 CERTAIN REPAIR TO JOINERY, FLOORING AND SANITARY FITTING IN SECTOR 28,29,30 AND RCMA BLDG (3BRD) AT CHANDIGARH UDNER GE (I) R AND D CHANDIGARH

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed.

All as per serial item No 1.00 above but exc. 1.5 Sqm and n.exc. 4 Sqm each.

Taking down shutters of any description n.exc. 1 Sqm each complete all as specified and directed.

All as per serial item No 2.00 above but exc. 1 Sqm and n.exc. 2 Sqm each.

Refixing shutters of any description n exc 1 Sqm each in same opening. complete all as specified and directed.

Refixing shutters of any description exc 1 Sqm but n exc 2 sqm each in same opening. complete all as specified and directed.

Cutting holes for inserting hold fast and making good dismaltled portion in CM (1:3) in brick walls, built in cement mortar or cement concrete 1:2:4 type B1as required exc one brick but not exc two bricks complete all as specified and direcrted.

Supply and fixing for factory made solid panel PVC moulded door shutterwith particle board core, 28 to 30mm thk (Style), with 2,4,or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and direcrted.

Supply and fixing for factory made solid PVC chowkhats or frames of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, complete all as specified and direcrted.

Supply and fixing for aluminium anodized barrel tower bolt of extruded section 150mm long complete all as specified and direcrted.

All as per serial item no 8.00 above but size100mm long.

Supply and fixing for aluminium anodized handle of extruded section 150mm long complete all as specified and directed.

All as per serial item no 9.00 above but size125mm long.

Supply and fixing for aluminium anodized door stopper 140mm long overall length complete all as specified and directed.

Dismantling of board of any description complete all as specified and directed.

Material and labour for 18mm thick Plain high density high moisture resistances (HDHMR) board any colour and sunmica finish wood grains, with white base paint finish UV HDHMR corner side rounding with edge bending tape, PVC boxes, drawer any shape and sizes will be made up by machines matching with final finish (UV) complete all as specified and directed. (Note :- Design and colour approved by GE)

Material and labour for 18mm thick one side prilaminated high density high moisture resistances (HDHMR) board any colour and one side sunmica finish wood grains, with white base paint finish UV HDHMR corner side rounding with edge bending tape, PVC boxes, drawer any shape and sizes will be made up by machines matching with final finish (UV) complete all as specified and directed. (Note :- Design and colour approved by GE)

Material and labour for 18mm thick both side prilaminated high density high moisture resistances (HDHMR) board any colour wood grains, with white base paint finish UV HDHMR corner side rounding with edge bending tape, PVC boxes, drawer any shape and sizes will be made up by machines matching with final finish (UV) complete all as specified and directed.. (Note :- Design and colour approved by GE)

Supply and fixing in Repair 2nd class hard wood plain fillets sectional area exc. 6sqcm n.exc. 13 Sqcm clean sawn, secured with nails or brads complete all as specified and directed.

Supply and fixing in repair continuous (piano) hinges, mild steel, bright finish or electro-galvanised width of trap when open 40mm thick complete all as specified and directed.

Supply and fixing for MS barrel tower bolt stove enameled black with bright bolt 200mm long complete all as specified and directed.

Supply and fixing for mild steel pressed handle stove enamelled black 150mm complete all as specified and directed.

Supply and fixing for 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel bright finished. complete all as specified and directed.

Supply and fixing for 100mm size of aluminium hasp & staple including bolt to hinge plate & fixed with screws, complete all as specified and directed.

Supply and fixing for factory made ERW section window box type ( 'P' Section) with hinges, steel handle, peg stay, complete with glazing bars, dovetailed or welded (to receive glazeed or gauzed) complete all as specified and directed.

Supply and fixing for factory made ERW section window box type ( 'P' Section) with hinges, steel handle, peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

Supply and fixing for steel ventilator with top hung shutter includig hinges steel peg stay, handle complete all as specified and directed.

Material and labour for framed work such as grills etc with ends of bars shouldred and or riveted or forged into spike, framed guard bars and similar work conforming to Fe 410-0 0r Fe 310-0. complete all as specified and directed.

Supply and fixing for 105X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified and directed.

Supply and fixing for 125X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

Supply and fixing for 35mm thick 2nd class hardwood (Hollock) factory made glazed and skelton shutters, open rebated and prepared to receive glass etc divided into squares with sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members complete all as specified and directed.

Supply and fixing for 35mm thick 2nd class hardwood (Hollock) factory made framed, panelled shutter (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces and fitted to chowkhats size of rails and styles as per IS-1003 (Part-I). The timber shall be kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing for MS helical door spring (rat tail pattern) 300mm long including roller and roller plate complete including welding and providing 40 X 3mm flat iron welded to angle iron frame as in repair complete all as specified and directed.

Supply and fixing for galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

All as per serial item no 30.00 above but fixed in repairs.

Dismantling structural steel work incl doors, gates but excluding framed, trusses etc. complete all as specified and directed.

Supply and fixing for mild steel work as in doors or gates of angle or other section of grade Fe-410-W with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting) fasteing and fixing complete fixed in repair complete all as specified and directed.

Supply and fixing in repair steel Almirah Handle MS CP of standard size complete all as specified and directed.

Supply and fixing in repair of locking device plate and Rod etc complete all as specified and directed.

All as per serial items No- 34.00 above but hinges MS of standard size.

Supply and fixing for SS fancy type 25 mm dia curtain rods fixed in repairs incl bracketSupply and fixing forinial complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate as in filling of pressed steel chowkats complete all as specified and directed.

Supply and fixing for 30mm thick flush shutters, solid core construction, with block board care and plywood face panels, commercial type on both sides complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame complete all as specified and directed.

Supply and fixing for 3.0mm thick ordinay sheet glass in squares n.exc. 0.5 Sqm each pane with silicon and oil putty complete all as specified and directed.

All as per serial item no 39.00 above but of thickness 4.8mm.

Supply and fixing for figured glass, pin head type and glazing with with silicon and oil putty in squares n.exc. 0.5 Sqm each of thickness 3.0mm. complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285,fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed echanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions

Supply and fixing for powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, 150mm long tower bolt 2 Nos, hinges anodised aluminum snap beading screws etc. complete all as specified and directed.

Taking down aluminium door shutters of size exc. 1.00 Sqm but n.exc. 2.00 Sqm, dismantling the door and replacing the MS anchor rods 10mm dia, both sides screwed and tightening inside frame, both side bottled & reassembled the door, fittings all items glass beading, hinges replacing rubber/aluminium beading where defective and fitted in position complete all as specified and directed.

Supply and fixing in repairs hydraulic door closer of aluminium fixed to door shutters of designation 2 complete all as specified and directed.

Supply and fixing in repairs 100mm size mortice locks of aluminium body, 4 levers suitable to aluminium door shutters complete all as specified and directed.

Supply and fixing for aluminium anodised window shutters, powder coated, side hung type without sash bars, aluminium section 83X44.45X2mm thick including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium builders hardware such as peg stage 150mm long -01 No, aluminium handles of size 100mm-01 No as each shutters, window shutter to be fitted with glass panes complete all as specified and directed. (glass panes to be measured & paid separately).

Supply and fixing in repairs ventian blinds, sheer demout blinds of with aluminium roller tube, cassette colour white fabric weight 140gms, light control 70% fabric composition 100% polyester complete all as specified and directed.

Supply and fixing for 300mm SS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

Supply and fixing for 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Supply and fixing for rubber beading in aluminium doors and windows fixed in repair complete all as specified and directed.

Supply and fixing for aluminium beading in aluminium doors and windows fixed with screw as in repair complete all as specified and directed.

Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing rubbish off the premises. complete all as specified and directed.

Material and labour for brick work with subclass B bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as speecified and directed

All as per serial item no 54.00 above but except brick complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in bed plates, hold fast ,lacing course coping, bed blocks etc complete all as specified and directed.

Taking down cement plaster on brick walls including hacking out joints, hacking for key, scrubbing down with water. complete all as specified and directed.

Material and labour for Rendering 15 mm thick internal using cement plaster in CM 1:6 on fair faces of brick/concrete work surfaces complete all as specified and directed..

Material and labour for Rendering 15 mm thick external using cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces complete all as specified and directed..

Material and labour for two coats of synthetic enamel painting over a coat of pink primer including preparation of previously untreated surfaces of wood or wood based material exc. 10 cm width or girth complete all as specified and directed.

Material and labour for two coats of synthetic enamel paint including one coat of red oxide primer on steel surfaces exc. 10cm width or girth including preparation of new surfaces, complete all as specified and directed.

Material and labour for two coats of cement base paint over a coat of white wash on new plastered surfaces including preparation of surfaces. complete all as specified and directed.

Material and labour for preparing newly plastered surfaces and applying two coats of oil bound distemper over a coat of chalk whiting, white primer complete on walls complete all as specified and directed.

Dismantling floor/heart or wall tile including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and directed.

Material and labour for non-skid colour ceramic tiles (joint free) 7 to 8 mm thick (square/rectangular) area of each tile execeeding 0.11 Sqm but n.exe 0.18 sqm , as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the exsisting area over and including 15mm thick screed bed or bedding of cement morter (1:6) for laying floor finishs complete all as specified and directed.

Material and labour for colour ceramic tiles in vertical surface 300 x 450 x 7 mm thick (square/rectangular) . set and jointed in neat cement slurry and pointed in white or coloured cement to match the exesisting area over and including 10mm thick screed bed or bedding of cement morter (1:4) for laying floor finishs complete all as specified and directed.

Welding in repairs to windows, door hinges, grills etc exc 2.50 cm of thickness not exc 6mm complete all as specified and directed.

Supply and fixing for 100 mm Aluminium alloy anodised hinges complete all as specified and directed.

Supply and fixing for of aluminium magnetic door catcher of suitable size for each shutter of cupboard. complete all as specified and directed.

Supply and fixing for 4 mm thick Sheet glass ordinary quality and glazing with silicon and oil putty in square n exc 0.50 sqm in each pan .complete all as specified and directed.

Material and labour for 0.8mm thk any coloured sunmica fixed as in joinery, wall for other locations as per site requirement . ( colour/ shade to be approved by engg-in-charge) complete all as specified and directed.

Material and labour for MDF Moulded Pannel door 35-45 mm thick of solide pine wood with honey comb paper door core complete all as specified and directed.

KUMAR AND COMPANY

M/S Bangali Ram

M/S MATLOOB AHMED

Om Sai Ram Builders