Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.3 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹17.9 L+₹3.1 L (21.2%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹18.3 L+₹3.5 L (23.8%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹18.4 L+₹3.7 L (25.0%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹19.0 L+₹4.3 L (28.8%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
23 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE West Lucknow
GE West Lucknow, 11 Sardar Patel marg, Lucknow cant-226002
WELCOME MAINT AND OTHER B/R COMPREHENSIVE SERVICES TO THE MD ACCN OF JCOs IN ZONE F AREA OF AGE B/R II UNDER GE (WEST) LUCKNOW
2022_MES_526586_1
GE/W/LKO/ 24 OF 2022-23
Open Tender
Civil Works
Item Rate
270 days
Lucknow
As per Tender Documents
9 documents required · 9 mandatory
₹500
GE West Lucknow
₹60,000
Yes
30 Jul 2022
26 May 2022
25 Jun 2022
26 May 2022
23 Jun 2022
9 Jun 2022
26 May 2022 - 2 Jun 2022
60 days
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of brick work or stone/ boulder masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles etc. complete all as specified and directed.
M&L for brick work with old size fly ash bricks of class designation 75, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed..
M&L for brick work with old size fly ash bricks of class designation 75, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
Taking down cement plaster or cement lime plastering , any descriptuon from brick wall including racking out joints hacking for key scrubbing down with water etc and M & L 15 mm thick rendering in CM (1:6 ) on other than fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Taking down cement plaster or cement lime plastering , any descriptuon from brick wall including racking out joints hacking for key scrubbing down with water etc and M & L 15mm thick rendering in CM 1:4 on fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Taking down cement plaster or cement lime plastering , any descriptuon from brick wall including racking out joints hacking for key scrubbing down with water etc and M & L 5mm thick rendering in CM 1:3 on fair faces of brick /concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed.
M & L for preparation of new plastered surface of wall and applying two coat of oil bound distemper of approved shade/tint over a coat of primer with roller complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint with roller over a coat of primer complete all as specified.
M&L preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M & L for preparation of old treated surface of wall and applying two coats of oil bound distemper of approved shade/tint with roller complete all as specified and directed.
M & L for preparation old treated surface of wall and applying one coat of cement based paint of approved shade/tint complete all as specified and directed.
M & L for preparation of old treated surface of ceiling and applying a coat of white wash complete all as specified and directed.
M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying a coat of synthetic enamel paint complete as directed.
M & L for preparation of old treated steel surface of any description exceeding 10cm width or girth and applying a coat of synthetic enamel paint complete as directed.
M&L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M & L for preparing new steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified.and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises and M&L Vitrified Ceramic coloured tiles light shade 8 to 10 mm thick (square/ rectangular) polished, joint free , area of each tiles not exceeding 0.36 sqm sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises and M&L Vitrified Ceramic coloured tiles light shade 8 to 10 mm thick (square/ rectangular) polished, joint free , area of each tiles not exceeding 0.36 sqm sqm, on walls as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 10mm thick screed bed in cement & sand mortar 1:4, complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises and M&L for glazed ceramic tiles (coloured) 350x250x7mm/450 x 350 x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering (as screed bed) in cement & sand mortar 1:4, complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises and M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises and M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:4 complete all as specified and as directed.
Taking down steel tubing and connection 15mm bore incl cleaning for refixing or removing from site and Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.
Taking down steel tubing and connection 20mm bore incl cleaning for refixing or removing from site and Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.
S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified.
S & F in repairs vitreous china wash down water closet (pedestal pattern/EWC) pan with and including seat cover white with “P” or “S” trap including connection to drain or outgoing and to syphonage pipe complete all as specified and directed
S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified.
S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified.
S&F in repairs long body 15mm bore bib tap, quarter turn, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.
S&F CP angle valve half turn for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type fixed as in repair complete all as specified and directed.
S&F in repair 15mm bore concealed type, stop valve cast copper alloy screwed down high pressure with capstan head and cup, screwed both ends for iron pipe or for union complete all as specified and directed.
S&F in repair fancy type pillar taps, quarter turn, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipes and fixed for 15mm dia complete all as specified and directed.
S&F in repair bib taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and directed.
S&F in repair chromium plated ABS body hand shower (health faucet), with 1m long flexible pipe with wall hook bracket etc. and all fittings for EWC complete all as specified and directed.
S&F in repair brass chromium plated overhead shower rose with arms, 125mm size, with or without swivel joint, suitable for 15mm bore pipe and fixed complete all as specified and directed.
S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed.
S & F in repairs Brass spindle for mixer/wall mixer of any type or pattern complete all as specified and directed.
Dismantling PVC water tanks and removing for capacity exceeding 250 litres & not exceeding 500 litres etc and S&F 500 litre capacity Rotational moulded polyethylene water storage tanks white colour triple layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.
S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.
S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n. exc 1.50 Sqm each complete all as specified and directed.
Taking down shutters of any description exc. 1 Sqm but not exc. 2 Sqm each complete all as specified and directed.
Taking down shutters of any description exc. 1 Sqm but not exc. 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including replacement of unserviceable screws complete all as specified and directed.
M&L 35mm thick factory made shutter plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
M&L 30 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
Supply and fixing factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat complete all as specified and directed.
M&L Pressed steel door frame of size 125 x 60 mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified and directed. Note :- The hollow portion of frame shall be filled with PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregates) and compacted properly before fixing the frame to opening, quoted rates shall deemed to include cost of same and nothing extra shall be paid for the same
S&F PVC solid door frame of size 50x47mm made out of 5mm thick plain coloured sheet reinforced with MS square tube & with wood grain printed complete all as specified and directed.
S&F 30mm thick PVC factory made paneled door shutter with wood grain printed & decorative beading with 10mmx10mm as per IS- 4020 made from MS tube of top and bottom rods. MS frame shall be covered with heat maulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on plain side & as gap insert for top and bottom rail. Pannelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawings.
S&F 300mm long mild steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of ms sheet and fixing bolts and sliding bolts of mild steel sections and fixed complete all as specified and directed.
S&F mild steel helical door spring 300 mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified.
S&F 100mm size butt hinges, medium weight, cold rolled, stainless steel and fixed with screws complete all as specified and directed.
S&F aluminium handle, 150mm size, cast type, anodized (ISI marked) complete all as specified.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed.
S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.
S & F in repairs 18/19mm thick block board, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work complete all as specified and directed.
S & F 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.
S & F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) quality confirming to Fe-410- W(Gde-E-250) quality-B complete all as specified and directed.
S&F in repair stainless steel 25mm dia curtain rods including brackets and fancy type end knobs, complete, all as specified and directed.
S&F in repair anodized aluminium glazed window shutters, sliding type, three track (two of glass and one of stainless steel wire cloth) without sash bars, with aluminium sections weighing not less than 0.55kg/m and three track aluminium sections of size 100x38x1.50mm of Make: Jindal/ Hindalco including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, fibre wheel rollers, anodized aluminium fittings such as hinges, tower bolts and handles etc. including glazed with 5mm thick tinted glass and wire meshed with stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed.
Dismantling stone slabs and tiles of any description or thickness in floors, aprovns etc laid bedded & pointed in any mortar.
M&L for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L 75mm thick cement concrete 1:4:8 type E2 (using 40mm graded stone aggregate) in sub base of flooring/hardstanding complete all as specified and directed.
M & L for Providing and laying 60mm thick factory made chamfered edge cement concrete rouber moulded paver block of M-35 grade confirming to IS-15658 (2006) with approved colour design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using rubber mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed
S & F in repairs 'E' board of approved make 600x600x4mm thick white prelaminated sett embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24 x 32 x 300mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm, maximum centrers.Hangers of GI wire 4 mm dia to be fixed by approved rawl plug, level and jumper and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall, Flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runners at 600mm centre to from 1200 x 600 mm modules cross tee longer than 600mm to be supported independently. 600x600mm dodules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross Tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacturer's instructions complete all as specified.and directed.
RAJEEV AND ASSOCIATES
Powertronix
M/s J C Oberoi
M/s Chandra Mohan and Sons
sidhi vinayak construction
M/S KAUSHIK CONSTRUCTION
M/S SWATI CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .