Construction of entrance shed, Toilet Block and other allied works at Temporary Terminal Building, ICGAS, Nani Daman.(Civil and Electrification Work)

Amount

Civil work

Sub Estimate - I : Civil WorkProviding corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.6 mm thick with zinc coating not less than 275 gm/ m2 (Up to Any Height).

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. .

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth (upto 10 ton)

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

Providing and filling in foundation & plinth with Rubble filling in layer of 20 cm thickness including watering, ramming and consolidating etc. comp. .

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Providing and fixing 18 mm thick granite (Telephonic black only) gang saw cut,mirror polished, premoulded and prepolished,machine cut for kitchen platforms,vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. .

Providing and fixing Door with 35mm chill wood flush door, 1.0mm laminate on both side, teak wood pati on all four side, ss hinges. mortise lock, stopper, fixing with screw fevicol, nail etc complete as directed by engineer in charge.

Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore.

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[A] 15 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [C] 25 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [F] 50mm.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(F) 75mm

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls.

Providing and fixing removable waterproof aluminium composite panel (ACP) work of minimum 4 mm thick for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. :Providing material and labour charge for fixing ALLUMINIUM COMPOSITE PANEL PARTITION with Pipe section 63mm x 38mm x 1.63 mm including glazing clips and 25mm x 25mm x 1.80 mm having cross section C/C not more than 0.5 x 1.00 meter and Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge with Frosted/Clear Glass Planes of 6.0mm thickness and/or 4mm Thick ACP Sheet of color as approved by engineer-incharge fitting with rubber gasket and other fixture and fastening etc. complete as directed by Engineer in charge.

Providing and fixing 12 mm thick toughen Glass door shutter incl SS hinges, handles , floor spring and all fixures etc complete as directed.

Providing and fixing G.I. precoated 0.8 mm thick Rain Water Gutter of size 300 mm x 200 mm with necessary supports etc complete up to all height as directed.

Painting two coats (including priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleaning the surface of all dirt, dust and other foreign matter.

Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm including 500mm x 450mm C.I. horizontal grating wih frame complete. (upto 10 ton)

Providing and fixing bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet or rubber and fixing to wooden pluge with C.P. brass screws and washers etc complete as directed.

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

Providing and laying controlled cement concrete M.150 and exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforsement for R.C.Cwork in (iii) Slabs having more than 10 cm and upto 13 cm. thickness

Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of required capacity each with all necessary fittings and connection etc. complete on terrace.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(G)110 mm

Providing and fixing powder coated alluminium partition with particle board hardner and 6mm thick clear float glass wherever required, having 12mm air gap, including providing EPDM gasket, perforated alluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc, as per specifications, including doors etc. with required fixtures etc. as per the drawing and direction of Engineer in charge.

Providing and supplying Stainless steel 202 three seater Benches of approve make design , shade and colour complete as directed.

Providing and fixing Automatic removable Flexible Curtain including providing channels etc of approve make design , shade and colour complete as directed.

Providing, supplying and installing G.I Portable Toilet unit of size 1.20 mt x 1.20 mt and minimum 2.40 m height, with approved structural elements of Bottom Frame- 14 swg. G.I. Sheet, Top Frame - 16 swg. G.I. Sheet, Stiffener Bottom - 80 x 40 mm x 16 swg. Rectangular – M.S. Pipe., Stiffener Top - 40 x 20 x 16 swg. Rectangular – Sq. Pipe., Side Post - Specially Formed 16 swg. G.I. Post Section, Side Wall Stiffeners - Specially Formed 18 swg. G.I. Channels., Paneling Outside - Specially Galvanized Grooved Sheet -18 swg. Thick, Internal Wall Paneling - 7.5 mm MDF Sheet, Roof Outside - Specially Galvanized Grooved Sheet -18 swg. thk. and properly Sloped and Water Tight, False Ceiling - 7.5 mm MDF Plain Sheet, Flooring - 18mm E. Board/Bison Panel Board with 0.9mm Carpet Flooring, Constructed of Rigid Steel Frame and Insulated with, Door closer, Aldrop, Lech & handles, Insulation - Rock wool density of 48 kg/m3 Rock wool insulation – (side wall -50mm, ceiling -50mm), Wiring - All wiring shall be concealed type & shall be of PVC insulated copper wire (FR Grade) of ISI – POLYCAB/R.R.CABLE /KEI make, Electrical Fittings - All Electrical Fitting in the Portable Cabin shall be 220-240V, AC 50 Hz Tube, Door Light, Exhaust Fan, Switched, Sockets, Earth leakage circuit breaker (ELCB) at the input junction for additional SAFETY, Outside Painting - Painting with coat or Epoxy Primer with two coat of paint, Legs - 5 inch high four legs at all four corners, provision for W.C. cabin with 1.5mm antiskid flooring and 4.0mm Backlite sheet and over head tank of minimum 300 litres capacity with stand and internal plumbing, foot step for entry door, provision of inlet and outlet connection etc. complete including all transportation, installation, unloading charges, etc. as directed.

Sub Estimate - II : Electrification Work Point wiring for Light / Bell with 2-1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 KV grade FR PVC insulated multi strand copper wires, in following type of pipe to be erected concealed in / on surface on wall / ceiling complete with 6 A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on/ in wall / ceiling as per pipe erected, with necessary Lamp holder / ceiling rose / H.D. Connector as directed. (c ) with oval conduit / pvc casing capping double lock type. (Cat-III)

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm. (green) both are of ISI marked 1.1 KV Grade FR PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall / ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC/Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on/ in wall / ceiling as per pipe erected, with necessary ceiling rose / H.D. Connector as directed. ( c) with oval conduit / pvc casing capping double lock type. Cat. I (Cat-III)

Providing and erecting double pole MCB isolator A.C. 22 duty confirms to IS 13947-3 240V. 40A. in existing box. Cat. III.

Plastic enclosure fitted with DIN rail suitable for incorporating One / Two nos. MCB.

Supplying & erecting XLPE (IS: 7098) (I)-88 ISI marked unarmoured Aluminium cable 1.1 KV grade to be erected as directed of following size. (c ) 2 core 6 Sq. mm.

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 230 V. 50 Cys. 1200 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2, 3 core flexible wire with earthing [ Make shall be approved by Engineer in charge]

Supplying and erecting 19/20mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with necessary 24/O. 2 flat 3 core flexible wire with ear thing.

Providing fan clamp of 30 x 5mm flat of required length & 10mm M.S. Bolt & Nuts erected with necessary hook of 10mm M.S. Round Bar.

Supplying and erecting approved make pedestal fan A.C. 230V. 50 Cy/s. 400mm sweep oscillating, type and adjustable, height complete with guard regulator & standard lead flexible wires and plug top. Cat. III.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt ,LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates). (A) Tube Light with integral/ non-integral driver. (c ) 16-18 Watts, Surge - 4KV, IP-20, 4 feet. (Cat-III)

Square/ circular surface/ Recessed Mounted Downlight with provision for spring loaded mounting clips complete. © 20-24 watts, Surge-4 KV. (Cat-III)