EE/D/KZI/ETW-43/25-26/29.12.25

Excavation of 9m, 9.14m pole pit on Rocky ground (Hard soil) (1.25m * 0.6m*1.83m)

Erection of 9m, 9.14m pole

Loading and Unloading of 9m PSC pole

Transporting of 9m poles from road side to pole pit upto 2 KM

Excavation of 8m pole pit on Rocky ground (Hard soil) (1.25m * 0.5m*1.5m)

Erection of 8m pole

Loading and Unloading of 8m PSC pole

Transporting of 8m poles from road side to pole pit upto 2 KM

Fixing of HT Pin Insulator

Fixing of LT Pin Insulator

Fixing of 11 KV Disc

Fixing of LT Shackle Insulator

Fixing of Aluminium Knob

Fixing of LT Single phase cross arm

Fixing of LT Three phase cross arm

Fixing of V cross arm 3 1/2'

Fixing of HT/LT TI fitting

Fixing of Tapping Channel cross arm 3 1/2'

Dismantling & Re- Fixing of LT Single phase cross arm

Dismantling & Re- Fixing of LT Three phase cross arm

Dismantling & Re- Fixing of LT Pin Insulator

Dismantling & Re- Fixing of LT shackle insulator

Dismantling & Re Fixing of Aluminium knob

Excavation of Stay pit on Rocky ground (Hard soil) (1.00m * 0.5m*1.5m)

Erection of Stay set

Dismantling & Re-Erection of Stay Set

Street light switching point arrangement withwire and switch including B type MS Box with painting

Dismantling & Re-Erection of Single Phase Service Connection

Erection of HT 11 KV Lines Stringing, Sagging, Binding for 7/4.09 ACSR Pin point

Erection of LT Lines Stringing, Sagging, Binding for 7/3.35 ACSR & 7/3.15 AAAC Pin point

Dismantling & Re-Erection of HT 11 KV Lines Stringing, Sagging, Binding for 7/4.09 ACSR Pin point

Dismantling & Re-Erection of HT 11 KV Lines Stringing, Sagging, Binding for 7/3.15 and 7/3.35 ACSR Cut point

Dismantling & Re-Erection of LT Lines Stringing, Sagging, Binding for 7/2.59 ACSR & 7/2.50 AAAC Pin point

Transporting of line materials from Sub Store to section office up to 20 KM

Transporting of line materials from section office to work Spot up to 20 KM

Annexure – III -I (Erection of Single pole Transformer structure without center support)

Annexure – III -II (Erection of Single pole Transformer structure with center support)

Annexure – II (Erection of Double pole Transformer structure)

Dismantling of Double pole Transformer structure

Erection of Transformer up to 200 kva

Loading Un loading of Distribution Transformer Below 250 Kva

Transporting of charges of DT/Line materials using Private Vehicle up to 20 KM (up and Down )

Set right of leaning of LT pole including x arms, TI fittings

Drilling / Less than 23mm holes per hole / slotted holes

For Ordinary. Tree clearance in HT or LT and Throne bushes & trees

For Coconut trees / Palmyra

Please Enable Macros to View BoQ information