Certain B/R repairs including tiling, sanitary works , sunken portion , tile, plastering etc to Md Accn at Site -II and Site -III area at Fatehgarh

Amount

Dismantiling of floor, hearth or wall tiling including cement mortar bedding (but not baking), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

M&L coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc .18 Sqm each in floors coloured tiles etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm th screed in CM (1:6) etc complete all as specified and directed.

M&L glazed coloured tiles (350mm x 250mm x 7 mm) /(450 mm x 350mm x 7 mm ) as in vertical surfaces set and jointed in neat cement slurry and jointed or coloured cement to match over 10 mm thick rendering in CM (1:4) etc complete all as specified and directed.

M&L for 18 to 20mm thick granite stone of Black colour , table rubbed & polished laid, bedded, set and joointed in neat grey cement slurry in plate forms etc and pointed with white cement including cutting made to required shape and edges round shape as required and design etc over 15 mm thick rendering in CM (1:6) complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar etc complete all as specified and directed.

M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6m mean radious built in CM (1:6) etc complete all as specified and directed.

-ditto- all as per above but except bricks etc complete all as specified and directed.

Taking down cement plaster on brick work or concrete surfaces including racking out joints etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on brick work or concrete surfaces finished even and smooth etc complete all as specified and directed.

M & L for 15mm thick rendering or brick work or concrete surface in CM (1:4) finished even & smooth w/o using extra cement all as specified.

M&L for 5mm thick Rendering in CM (1:3) on brick work or concrete surfaces on ceiling finished even and smooth etc complete all as specified and directed.

M&L 10 mm th plaster as in CM (1:3) as in chajjas, facia bottom and sides and the like works , including cutting the loose concrete and reienforcement amd making the alignment of structure straight complete all as directed

M&L for 2 coats of cement base painting over a coat of primer on newly plastered surfaces of wall incl preparation of surfaces.

M&L preparation of Newly plastered surfaces and applying two coats of OBD over primer coat etc complete all as specified and directed.

M&L preparation of Newly plastered surfaces and applying three coats of White Wash on ceiling etc complete all as specified and directed.

S&F in repairs PVC acrylic toilet cabinet with shelves (440mmx325mmx120mm) size with shutter and mirror complete all as specified and directed.

S&F in repair stainless steel 1 mm thick kitchen sink, with drain board of size (915 mm x 460 mm) , bowl size (410 mm x 330 mmx 160 mm), including, waste coupling, PVC flexibale waste pipe etc complete in all respect, fixed on MS brackets

M&L hacking out old broken glass any thickness/ size from wooden/mental frame, glazed with putty or fixed with beading etc complete all as specified and directed.

S&F 3.00mm thick sheet glass ordinary quality and glazing with oil putty in square n'exc 0.5 sqm in each pane etc complete all as specified and directed.

Taking down chowkhats incl shutterrs (without taking off shutters from the frame) n.exc 1.5 sqm each etc complete all as specified and directed.

Taking down chowkhats incl shutterrs (without taking off shutters from the frame) exc 1.5 sqm and n'exc 4.00 sqm each etc complete all as specified and directed.

Taking down shutterrs exc 1 sqm and n'exc 2.00 sqm each etc complete all as specified and directed.

S&F 35mm thick 2nd class H/wood plain framed factory made shutter panels shutters (Two panel) with lock rail and panel of 9mm or 12mm B.W.P Commercial ply. The size of rail and style as per IS : 1003 (Part I), Kiln seasoned and chemically pressure treated etc complete all as specified and directed.

35 mm th Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8

S&F mild steel framed work of angle or any other section (grade 410 - 0 or Fe 310-0) as in door and door frame, gates of angle frame work etc including necessary welding etc complete all as specified and directed.

Steel windows or ventilators, fixed type, with glazing bars complete all as direcected by engineer - in- charge

Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as direcected by engineer - in- charge

Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as direcected by engineer - in- charge

S&F MS work fixed as in fillet to steel window including bolts, if required: and similar small articles conforming to complete all as specified and as directed

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as per specification & drawing given in SSR 2004(Part-II).

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width & stuck inside with solvent cement for stile and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing etc complete all as specified & directed.

S&F aluminium anodised barrel tower bolts of extruded section of 125mm size etc complete all as specified and directed.

S&F aluminium handles, cast type anodised of size 125mm etc complete all as specified and directed.

S& F PVC butt hinges 100 mm size fixed to PVC doors with screws complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with wooden windows/doors/steel windows with screws /wooden beading using old beadings , tinned tacks or galvanised wire staples etc complete all as specified and directed.

S&F butt hinges medium grade cold rolled 100mm mild steel and fixed etc complete all as specified and directed.

S & F mild steel sliding door bolt 300mm long clip type, stove enamelled black with bright bolt not less than 16mm dia complete all as specified and directed.

S & F mild steel barrel tower bolt 150mm long, stove enameled black with bright bolts complete all as specified and directed.

S & F mild steel pressed handle oval type stove enameled black of size 150mm complete all as specified and directed.

M&L for prepration of newly wooden surface over 10cm width or girth and applying two coats of syntheic enamel paint etc complete all as specified and directed.

M&L for prepration of newly steel surface over 10cm width or girth and applying two coats of syntheic enamel paint etc complete all as specified and directed.

M&L for prepration of newly steel surface over 10cm width or girth and applying two coats of syntheic enamel paint over a coat of red oxide primer etc complete all as specified and directed.

S&F in repair 20mm dia decorative curtain rods of MS conduit 1mm thk with bright finished, with barckets and domes at the end (curtain roads shall be provided with two bracktes and end/side doom as per site reuirement) complete all as specified and directed.

Taking up or down Steel Tubing bore of pipe in 15mm and connections, including cleaning for refixing or removal to store etc complete all as specified and directed.

...ditto... but for 20mm bore....ditto..

S&F tubes medium grade bore of tube in 15mm galavanised with all fitting laid in trenches, walls, ceiling or laid in floors etc complete all as specified and directed.

S&F tubes medium grade bore of tube in 20mm galavanised with all fitting laid in trenches, walls, ceiling or laid in floors etc complete all as specified and directed.

Dismantling water tanks of any description and size of capacity exc 250 lit but not exc 500 lit and removing to store

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed up, capacity in 500 Ltrs, hoisted and fixed in position with all fittings and fixtures in position complete all as specified in SSR Part-I. including 20 mm dia PVC Float valve and dismantling of existing water tank etc complete all as specified and directed.

S&F in repaies vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc complete all as specified and directed.

S&F in repair low level flushing systern PVC valveless syphonic action type, 10 ltrs capacity complete all as specified.

Supply & fixing in repairs vitreous china squatting pan “Orissa Pattern” of size 580mm x 440mm, white with, integral foot rests front or back inlets including lime concrete bedding complete all as specified and directed.

S&F mild steel Helical door springs fixed to pressed steel chowkhat/MS Chowkhats complete all as specified and as directed by engineer in charge

S&F in repair mild steel Helical door springs fixed to pressed steel chowkhat/MS Chowkhats complete all as specified and as directed by engineer in charge

S&F in repairs stop valve, bore of dia 15mm of PTMT any colour high pressure screwed for iron pipe and fixed etc complete all as specified and directed.

S&F in repair bib tap 15mm bore dia of pipe standard of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15mm - 90 gms) etc complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

S&F in repairs PVC waste coupling for kitchen stainless steel kitchen sink with flexible waste pipe complete all as specified and as directed

S&F in repairs Shower rose 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (Min wt 40gms) etc complete all as specified and directed.

Built in steel Cupboard (shutter and frame) of pressed steel frame of size 75mm x45mm x1.25 mm thick with pressed steel shutter 1.00mm thick Godrej Pattern including lock , handle and key in duplicate fixed to masonary walls by hold fast made out of 25 x 3 mm FI embeded in PCC 1 :2 : 4 type B1 complete, incl two coats of spray painting over a coat of red oxide primer on steel surfaces after taking out of old existing cupboard frame with shutters complete all as directed.

19mm Veneered particle boards interior grade, solid core, general purposes type, with face of decorative veneers on both sides fixed as in shelves

S & F angle, joist, channel or tee sections fixed independently,without connecting plats. Etc. (Fe-290 Gde-E-165)

M&L welding in repairs not exceeding 5 cm in length to the metal for fixing of broken hinges , broken steel windows etc

Demolition and breaking up drain pipes 100/75 mm dia ( salit glazed ware, AC or rienforced conc, PVC ) set in cement Mortar fixed in any position

S & F PVC ( SWR pipe ) 110 mm bore rain water pipe in any length with rubber ring joints laid in trenches of in floors etc complete all as specified and directed.

S&F 110 mm bore PVC(SWR) bend any radius complete all as specified and directed.

S&F in repairs pillar tap 15mm bore PTMT any colour high pressure screwed for iron pipe and fixed (Make Parayg) complete all as specified and directed.

Supply only pillar tap 15mm bore PTMT any colour high pressure screwed for iron pipe (Make Parayg) complete all as specified and directed.

Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving n.exc 15cm thickness (below or above ground level) etc complete all as specified and directed.

Demolition of RCC work of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 including fixing to walls with rawl plug to walls complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring complete all as specified and irected. etc. and making good, cutting exc 10 cm girth but not exc 20 cm girth complete all as specified and directed.

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed.

M&L PCC type C-2 (1:3:6) (20mm stone graded aggregate), 50mm thick as in Plinth Protection finished even and smooth etc complete all as specified and directed.

Demolition of cement concrete (un-reinforced) as in sunken portions upto any depth in floors, complete all as specified and directed.

M&L cement concrete 1:2:4 type B-1 as in levelling /slopping course as in sub floors finishing the top surfaces fair and even complete all as specified and directed

M&L applying water proofing treatment to roof slabwith APP modified polyeric membrane with centre core 100 micron HMHDPE out film 20 micron each having thickenss 3 mm , weight not less than 3.00 kg/Sqm with 100 mm side overlapand 150 mm end lapand laid with following course of descritiopn below:- (a) Applying evenly a coat of bituminous primer conforming to IS 3384-1965 @ 0.50 ltr/sqm prepared surface till the surface is properly impregnated and solvent oil in primer shall be allowded to evaporate completely. (b) Second caot of bonding material using hot blown grade bitumen 85/25@ 1.2 kg/Sqm conformoing to IS 702-1988 over bituminous primer . (c) third course i:e laying APP Modififed polymeric membrane describe hereinbefore with 100 mm overlap in longitudinal direction and 100 mm in traverse direction , (d) Fourth course of bonding material using hot blown grade bitumen 85/25 conforming to IS 702-1988 @ 1.2 Kg/Sqm over membrane. (e) Fifth course is sprinkling a layer of course sand dusting @ 1kg/Sqm as directed.

MS. BK BROTHERS AND CO