PROVN OF EXTERNAL ELECTRIC AND WATER SUPPLY SERVICES FOR COMBAT WEAPON TRAINING SIMULATOR FOR SLI REGT CENTRE AT FATEHGARH CANTT

Amount

Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed for laying of under ground cable, foundation of pole and stay etc. complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well remmining in layers not exc 25 cm.complete all as specified and as directed

Removing excavated material n.exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed

M&L for sand cushioning to U/G cable in layers of 23 cm thick( 8 Cm before laying the cable and 15 Cm thick after laying the cable) in trenches complete all as specified and directed. Note :- Only Puned down volume shall be measured & paid for.

Supply and lay burnt best quality locally available old size sub class 'B' bricks laid in trenches perpendicular to U/G cable for cable protection complete all as specified and as directed.

Supply, laying , jointing and testing of HT XLPE cable 3 core, 11000 volt screened, PVC 'E' grade insulated bedded, galvanised steel (Heavy duty) strip armoured with aluminium conductor 11 KV pressure earth system confirming to IS-7098(Part-I) 1977 and part-II of 1985 laid in pipe /ducts/trenches, under floor and road or fixedd to wall etc complete cross-sectional area of cable 95 sqmm 3 core, complete all as specified and directed

Supply and lay in trenches or passing through pipe XLPE insulated armoured, heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 70 Sqmm 3.5 core complete all as specified and directed

All as per item No - 7 but size 50 Sqmm 3.5 core

All as per item No - 7 but size 35 Sqmm 4 core

All as per item No - 7 but size 6 Sqmm 4 core

M & L MS clamp made out of 50x6 mm flat iron bending cold or hot,drilling holes for bolts , in any shape or size as indicated or directed and inclusive of one primer coat,one under coat and one finishing aluminium coat of paint complete all as specified and directed.

Boring holes horizontally under road without damaging the surface of road ( minimum 1.0 Metre below the road surface with the help of GI tubing not exc 80 mm bore(dia) for passing UG cable, complete all as specified and as directed. NOTE : - GI Pipe laid will be measured and paid separately under respective item

S&F of 50 mm bore GI tubing light grade with all fittings laid across road, in trenches or across PCC drain, along electric pole or floor/wall for cable protection with suitable size of MS clamps and nut and botls/washers complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick, burried directly into the ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI earth strip 25 x 4 mm by means of bolts, nuts, check nuts, and washers of galvanised iron or steel all as shown iln electrical plate No. 3 connected to earthing test point all as specified or indicated including excavation and connected earth work, PCC chamber and cover, watering pipe, funnel wire mesh but without earth lead protection pipe and test on completion after dismantling unserviceable erthing (above GL only) complete all as specified and directed. ( Note :- On testing after completion if desired earth resistence is not obtained, the earthing will be redone at no extra cost.)

M&L of outdoor end terminal joints heat shrinkable Suitable for HT 11000V (Earthed), XLPE insulated armoured Heavy duty under ground cable including joint kits and labour complete for making joints suitable for aluminium conductor cable of cross sectional area 95 Sqmm 3 Core complete all as specified and directed.

Supply,installation, testing & commissioning of 160 KVA energy efficient level III, step down transformer, 11/0.433KV 3 phase, 50 Hz, oil cooled, ONAN, outdoor type,copper wound with complete fittings/accessories complete as per IS-1180 (Part I) with first filling of IS-335, ISI marked filtered & Dehydrated transformer oild and other standard fittings/accessories and 7 position OFF Circuit Tap Changer (Tapping Range +/- 7.5% in steps of 2.5% each with vector Group Dyn-11 complete all as specified and directed Note: Provision of Brick Masonry Platform for Transformer, overall size 2.50 m x 2.50 m and 1.50 m height above ground level and 0.60 m below ground level with Brickwork with old size Bricks in Cement Mortar 1:6 including excavation and earth work in any type of soil, PCC foundation with 100mm thick PCC 1:4:8, Type D2 using 40mm graded aggregate, PCC flooring with 40 mm thick PCC, 1:2:4, Type B1, using 20mm graded aggregate, over a sub base of 75mm thick PCC 1:4:8, Type D2, using 40mm graded aggregate over approved earth filling and rendering in CM 1:4, 20 mm thick over brick walls and applying three coats of white wash etc and rate quoted against respective item is deemed to be included for the same complete all as specified and as directed.

S&F of LED 60 Watt powder coated pressure die cast aluminium SMD street light with heat resistant toughened glass with lens and including PVC insulated and PVC sheathed three core 1.5 sqmm copper conductor multistranded complete all as specified and directed.

M & L for DK Thermoplastic cable junction boxes IP 65 with metric knockouts for cable entry, weather proof for outdoor installation and including glands and with 4 terminals for terminating one incoming and outgoing UG cable of size 10/16 sqmm 3.5/4 core and including 40 mm GI pipe for holding LED light and fixed to the PCC/Steel Poles by means of suitable size of clamps with nut and bolts complete all specified and directed.

Supply and erecting Steel tubular swaged pole complete with cast iron base plate , finial taper plug , bolts , nuts & screws as specified type 410 SP-31, 9 mtr long, complete all as specified and shown on drawings including the followings:-(a) Excavation in post holes in any types of soil, returning filling, well ramming and disposal of surplus soil to a distance not exceeding 50 mtr from the starting points.(b) PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation including form work.(c) PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping including form work.(d) PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in base.(e) Painting of poles externally with one coat of black bituminous paint (upto planting depth) and above plinth block concrete collar with two coats of aluminium paint over one coat of red oxide primer including preparation of surface including painting of 30 cm wide bands 3 Nos with synthetic enamel paint of appropriate colour in alternate layer upto height of 1.5 m above plinth block.(f) Painting of coping shall be cement base paint complete all as directed.(g) Embeded portion shall be painted with two coat of black bituminous paint complete all as directed. Note:- (i) This item consists of provision of steel pole and work mentioned in para (a) to (g) only.

M&L for cutting existing CI/GI pipe line 100 mm dia for insertion of tee of size 100 x 100 x 50 mm for branch connection including excavation and earth work complete all as specified and directed

Supply & Fixing 50 mm bore galvanized steel tubing , medium grade with all fittings and fixed to walls , ceilings or laid in floors, trenches complete as per IS 1239 Part-II complete all as specified and directed

Supply & Fixing 20 mm bore galvanized steel tubing , medium grade with all fittings and fixed to walls , ceilings or laid in floors, trenches complete as per IS 1239 Part-II complete all as specified and directed

Supply and Fix Gun-metal, globe or gate valves, 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

Supply and Fix Gun-metal, globe or gate valves, 50 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

M & L for construction of brick masonry valve pits with sub-class ,B, brick built in cement mortar (1 : 6) of size 600 x 600 x600 mm (internal dimension) with one brick walling and 750 mm x 750 mm x 100 mm base foundation with PCC (1 : 3 : 6) rendering cement plastering 10 mm thick with cement mortar (1 :4) on internal & exposed surfaces including MS cover of size 75 x 75 cm made out from 3 mm thick MS sheet including 30 x 30 x 5 mm angle iron framing on MS cover as well as on top wall of the valve pit & painting of the MS cover with two coat of synthetic enamel paint over a coat of red oxide primer including necessary earth work all as specified and directed

virendera singh (BID ID -3056054)

M/S J J ENTERPRISES (BID ID -3067847)