Upgradation to the IOHP area inside Harbour area.

Amount

Earth work excavation in all kinds of soil from the existing ground level in foundation trenches & levelling, dressing, ramming as per requirement and disposing the excavated material within an average lead of 5 km by Trucks or any suitable vehicle, dewatering if required at site with supply of all labour, materials, T&P, hire & running charges of all machineries, Port entry fees, all taxes etc all complete excluding GST and as per direction of Engineer in charge.

Filling with saline sand in foundation bed including collecting, conveying by trucks / dumpers with all lead and lifts, loading at one end and unloading at other end spreading and laying, watering, compacting by using VRR, dressing, proper level and slope etc. with supply of all labour, materials, T&P, taxes, royalties, running & hire charges of VRR, trucks/dumpers, operator expenses, Port entry fees etc. complete excluding GST and as per direction of Engineer in charge. N.B:- 10% voids shall be deducted from the measured quantity of sand after compaction to arrive at the payable quantity.

Supplying, mixing, transporting, laying in proper level & grade Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand : 6 hard granite graded chips of 20mm & below size Crusher Broken) for PCC including form works made of ply/steel shutters, hoisting, laying over compacted surface, finished smooth to the exposed surface, to proper level & gradient, barricading the work site curing etc with supply of all materials, labour, T&P, all taxes, hire & running charges of all machineries, transportation charges, Port entry fees etc. all complete excluding GST and as directed by the Engineer in charge.

Providing cement concrete (1:1½:3) (1 cement: 1½ sand:3 coarse aggregate) for R.C.C. work using 12mm & down grade hard black granite (CB) chips of approved quality including mixing, hoisting, laying, consolidating, curing, maintaining, proper level and slope, finished smooth to the exposed surface, providing weep holes with 75mm dia PVC pipes for drainage of water with supply of all labour, material, tollage, taxes, T&P etc. all complete excluding GST and as per direction of Engineer in charge. (excluding centering shuttering, bending, binding and cost of steel).

Supply of Fe-500 steel confirming to I.S. Specifications of SAIL/VIZAG/TATA make including cutting, straightening, bending, binding & placing the grills in position for RCC works including cost of binding wire of 18 to 20 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, Port entry fees etc. all complete excluding GST and as directed by the Engineer in charge. N.B: Payment shall be made as per the co-efficient laid down in IS-1786. No wastages shall be paid.

Providing Rigid and smooth leak proof centering & shuttering with form works made of ply/steel, painting with coltar/lubricant over the ply/steel after each use for RCC works in slab, wall, raft etc. including dismantling them after due period with cost of all material, labour, T&P, taxes, tollage, gate entry fees, transportion, staging etc all complete excluding GST and as per direction of Engineer in charge.

For RCC Wall

Foundation & Plinth

Collecting, Conveying, Supplying & Spreading of IRC Grade-III metal of approved quality & filling the interstices with required Quarry Dust as per specification, laying over the compacted Gr-I surface to required slope, compacting by Vibratory Road Roller including supply of all materials, labour, T&P, transportation charges, hire & running charges of all equipments, water sprinkling, royalties, Taxes, Port entry fees etc. all complete excluding GST and as directed by the Engineer in charge.

Collecting, Conveying, Supplying and transportation of Quarry Dust of approved quality, conveying the same by private Trucks/ other vehicles including loading, unloading, spreading quarry dust over the approved surface in suitable layers, compacting with VRR for both Dry & Wet rolling all complete including cost of all materials, labour, T&P, royalties, Taxes, hire & running charges of all equipments, Port entry fees, operator expenses cost of water, fuel, lubricants etc all complete excluding GST and as directed by the Engineer in charge.

Collecting and supplying the river sand of good quality with spreading the same over the indentified area to the required level & slope including transporting within a lead of 40 Km. (avg.) by private vehicles with covering at the top to prevent spillage of sand including loading at one end & unloading at other end, spreading in layers, leveling, watering, compacting by smooth wheeled vibratory road roller 8 Ton to 10 Ton capacity with supply of all labour, materials, T&P, all taxes, Port entry fees, engagement hire & running charges of all equipments etc complete excluding GST and as directed by the Engineer in charge. N.B:- 10% voids shall be deducted from the measured quantity of sand after compaction to arrive at the payable quantity.

Providing & laying factory made pre-cast concrete paver blocks of M-40 grade of 80mm thick and confirming to relevant Indian standard with consistent and uniform quality, rubber moulded and cured through drying process mechanically vibrated and compacted precast interlocking blocks of approved design with providing and laying in position over compated layer of 50 mm thick (average) coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, tamping and sweeping, loading at factory end and unloading at site, stacking, testing of paver blocks including transportation, taxes, tollage, Port entry fees etc. complete excluding GST and as per direction of Enginer in charge.

Dismantling of RCC works by using jack hammer/any other mechanicl means and disposing the same with supply of all labour, engagement, hire & running charges of all equipments, T&P, all taxes, Port entry fees, providing safety arrangements for workmen, cleaning the site, all transportation etc all complete excluding GST and as directed by the Engineer in charge.

12mm thick Cement plaster in C.M (1:6) over outside & inside surface of brick work & R.C.C work, racking out the joints rounding the corners, providing grooves or bead lining where found necessary & finishing smooth to the exposed surface with curing, scaffolding, staging including cost & supply of all labour, materials, T&P, taxes, tollage etc. all complete excluding GST and as directed by Engineer in charge.

Design, development, supplying and fixing of single sided Signboards of size 0.75m x 1.5m made of Micro Prismatic Retro Reflective sheeting DG-3 pasted on 3 mm thick aluminum composite material as per IRC 67-2010, fixing each board with 8 Nos. of SS Mechanical Anchor Bolt of 12mm dia and 100mm long, the front side covered with Retro Reflective sheeting DG-3 with all letters, numerals and pictographs with border as per approved colour scheme including all labour, taxes, transportation, tollage, hire & running charges of all equipments, Port entry fees, taking all safety precautions while installation etc. all complete excluding GST and as per direction of Engineer in charge.

Painting with Weather Coat paint with approved quality and shade over one coat of primer including scrapping, cleaning the surface with supply of all materials, labour, T&P, all taxes, tollage, gate entry fees, scaffolding charges including providing jhula/floater, taking all safety precautions etc complete excluding GST and as per direction of Engineer in charge.

Deployment of the following machineries at required location inside prohibited areas for lifting and shifting of cargo materials stacked in plot and other works as & when required with supply of all labour, T&P, operator charges including transportation, hire and running charges of machineries, fuel & consumables with all taxes, Port entry fees, tollage etc. all complete excluding GST and as directed by Engineer-in-charge. (Payment shall be made for actual hours engagement for the machineries with reference to the jointly signed Logsheets maintained by the Contractor which should be produced before payment. No idle charges will be paid and shifting charges from one place to anothre shall not be paid).

Excavator of 1 Cum Bucket Capacity:

Payloader

Hyva (20T)

Brick work in cement mortar (1:6) in foundation and plinth and super structure using K.B. Bricks having crushing strength between 75 Kg/Cm² to 99Kg/Cm² of any height levels with cost & supply of all materials, labour, T&P, tollage, royalties, taxes, Port entry fees, staging, scaffolding, curing all transportation charges etc. complete excluding GST & as per direction of Engineer in charge.

Providing cement concrete (1:2:4) (1 cement: 2 sand: 4 coarse aggregate) for concrete works using 12mm & down grade hard black granite (CB) chips of approved quality including mixing, hoisting, laying, consolidating, curing, maintaining, proper level and slope, finished smooth to the exposed surface, providing weep holes with 75mm dia PVC pipes for drainage of water with supply of all labour, material, tollage, taxes, T&P etc. all complete excluding GST and as per direction of Engineer in charge. (excluding centering shuttering, bending, binding and cost of steel).

M/S Kailash Chandra Samal

Naresh Chandra Bhatta

Ms Gangadhar Jena

NNS CONSTRUCTIONS AND ENGINEERING PRIVATE LIMITED

Bidyadhar Swain

M/s.BASUDEV CONSTRUCTION

Anand Shree Infra Reality Pvt. Ltd

M/S BHAIRAB CHARAN SWAIN

Kulamani Nayak

CMRGS INFRASTRUCTURE PROJECTS LIMITED

Aakar Infra Engineers PVT Ltd