Repair of bridges culverts and road protection work on various SH MDR ODR category roads in Block Lakhauthi in the financial year 2026-27

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. MORT&H Specification 304 Sr No 3.13. Including cost of, all material, labour, T&P and Labour cess etc. complete but excluding GST.

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2. MORT&H Specification 305 Sr No 3.18 Including cost of, all material, labour, T&P and Labour cess etc. complete but excluding GST.

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. MORT&H Specification 2100 Sr No 12.04 Including cost of, all material, labour, T&P and Labour cess etc. complete but excluding GST.

Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications. Including cost of, all material, labour, T&P and Labour cess etc. complete but excluding GST.

Pointing with cement mortar (1:3 ) on brick work in substructure as per Technical Specifications MORT&H Specification 1300 & 2200 Sr No 13.02 Including cost of, all material, labour, T&P and Labour cess etc. complete but excluding GST.

Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical Specifications MORT&H Specification 1300 & 2200 Sr No 13.03 Including cost of, all material, labour, T&P and Labour cess etc. complete but excluding GST.

Road Delineator: Supply & Fixing of M S Delineator made of Mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion. The surface should be conceated so that there should not be any exposed surface without powder coating. Alternatively, these metal guide poles can be concealed with thermoplastic body. The posts shall have Ian ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 mm base which can be anchored onto the ground. Mild steeI Guide Poles shall conform to Type XI sheeting specifications as per IRC:67 and ASTM D4956 which would ensure to obtainI clear visibility of the road alignment during night time. The Retro reflective sheeting shall be tested for A certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory / Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer / Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012 & Proof of the same Report shall be uploaded which quoting tender. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge. Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Retro-reflectorised Traffic sign as per IRC-67-2012 Providing & fixing of retro-reflectorised cautionary, mandatory & informatory sign as per IRC :67-2012 made of high intensity grade sheeting type-IV vide clause 801.3,fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour & luminance,shrinkage,flexibility, liner removal, adhesion, impact resistance, specular gloss & fungus resistance,3 years outdoor weathering and its having passed these tests shall be obtained from International /Government Laboratory/Institute by the manufacturer of the sheeting & in case the certificate is obtained from international condition,it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively,a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally.In such a situation,the Employer / Client, if so desires,could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends,letters, numerals & borders etc should be as per MoRTH specification No-801 (8.4) SOR Item 22.23 Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.