SPECIAL REPAIRS TO BLDG NO H-06 RING ROAD COLONY OF IHQ OF MOD CAMP UNDER GE CENTRAL DELHI CANTT 10

Amount

S&F rotational moulded polythene water storage tank three layered (Cylindrical vertical withclosed top)hoisted and fixed in position of 500 ltrs capacity including PVC tank nipples including 20mm dia PTMT float valve,complete all as specified in SSR Part I including dismantling of existing tank and removing to store.

Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M & L 75mm th PCC 1:3:6 type C-2 as in plinth protection,path etc finished even and fair without using extra cement complete all as specified.

S & F in repairs kitchen plate rack with four shelves made out of stainless steel sheet 1mm thick over all size 90x60x25cm complete all as specified

M&L for Complete removal exising old surfaces of wall by scrubbing with hard brushing ,brooming down or steel wire brushing scraping down smook root mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water applying 2 mm thick wall care putty and apply two coat oil bound distempr over one coat of primer from the same manufacturer complete all as specified and directed

M&L for complete removal existing old surfaces of ceiling by scrubbing with hard brushing, brooming down or steel wire brushing scraping, three coat of white wash including preparation of new surfaces as on ceiling complete all as specified and as directed.

S&F in repair stainless steel gratings 100mm bore size fixed with cement motar complete all as specified .

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.

M&L rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finishing the surface even & smooth without using extra cement complete all as specified & directed.

M&L rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finishing the surface even & smooth without using extra cement complete all as specified & directed.

M&L Rendering 5mm thick on concrete surfaces in CM 1:4 as on ceiling all as specified and as directed.

M&L for Preparation of new plastered surfaces of walls and applying two coats of exterior emulsion paint (Weather Coat) over a coat of priming paint etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L three coat of white wash including preparation of new surfaces as on ceiling complete all as specified and as directed.

Dismantling boarding any discription fixed in any position with nails complete all as specified.

M&L for Prelalminated particle board 18/19mm thick, exterior grade prelaminated both sides with decorative choice laminations in Kitchen cuboards and shutters of Kitchen cupboards / almirahs. All as specified and directed.

S&F in repairs continous (piano hinges, mild steel bright finish or electro galvanized width of flap 30mm when open complete all as specified.

S&F in repairs 40mm dia cup board knob fixed with nut screw and washer of mild steel bright finish.

M&L for 25 mm thick Block board grade 2 quality interrior grade commercial type fixed with screws to timber frame work including teak wood leaping and necessary rebating for double shutter where required (Note : teak wood leaping shall be measured and paid separatly)

M&L for 6 mm thick teak wood leaping all around for 19/20 mm shutter including polishing painting fixed withfevicol, headless screws complete all as specified.

S&F 100mm size hasp and stable safety type aluminium anodised with mild steel hinge pin including bolt to hinge palte and fixed with screws omplete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each complete.

Plain, solid, straight chowkats and frames made out of 2nd class hard wood (sal), wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed, complete all as specified and as directed.

S & F factory made 2nd class hard wood,Glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge etc edges of framing plain champered or rounded fitted with cut & metered beads for securing glass etc sized of membere shutter as specified in SSR Part I Section 8, Clause 8.23 (a) supplied and fitted to chowkhatscomplete all as specified and as directed.

S& F 35 mm thick flush shutters (factory made) solid core construction, with block board core and plywood face pannel, commercial type on both sides. Flush shutters shall have teak wood edging as specified in IS and magic eye, complete all as specified.

M & L for mild steel framed work framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete(Fe-410-W(Gde-E-250)quality-A complete all as specified.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & gap insert for top rail & bottom rail, paneling of plain color PVC sheet to be fitted in the MS frame, welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent complete all as specified & directed.

S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified & as directed

S&F stainless steel wire cloth 0.36 mm nominal dia of wire of average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staple

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix 200 mm long mild steel barrel tower bolt, complete all as specified

Supply and fix 300mm long, mild steel, sliding door bolt matt finish not less than 16 mm dia bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts extruded section or cast aluminum alloy, complete all as specified.

S&F 150mm size aluminium handles,cast type,anodised all as directed.

S&F 100mm butt hinges mild steel medium weight cold rolled complete all as specified and as directed.

Supply and fix 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate including welding where ever necessary complete all as specified and directed

M&L for preparation of new wooden or wood based surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.

M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

Supply and fix in repairs sink with drainage board made out of stainless steel 1 mm thick for kitchen with plugs, washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever, brackets and connecting union to pipe over all size 1020 mm X 510 mm, bowl size 460 mm X 360 mm X 160 mm complete all as specified.

Material and labour for welding in repairs not exc 2.5 cm in length and exc 6mm thick complete all as directed

Taking up or down steel tubing with connections for cleaning for refixing or removing from site of 15mm bore complete, all as specified .

Taking up or down steel tubing with connections for cleaning for refixing or removing from site of 20 mm bore complete, all as specified .

S&F 15mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls,fixed on wall and ceiling or laid in floor complete all as specified.

Fixing only 15mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, l and ceiling or laid in floor complete

S&F 20mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls,fixed on wall and ceiling or laid in floor complete all as specified.

Fixing only 20mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, l and ceiling or laid in floor complete

Cutting chases, pinning in , for concealed water tubing on block walls, making good to facing where required and pointing in cement mortar 1:3, not exc 10 cm girth complete all as specified..

S&F in repair vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, but excluding waste pipe complete all as specified.

S&Fin repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including P or S trap including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and as directed.

S&F in repair 10 Ltrs (PVC) white, valve less, syphonic action type, dual type flushing cistern, low level with inlet ball valve, float and top push button type, complete all as directed.

S&F in repairs 15mm bore bib taps fancy type half turn cast copper alloy Chromium plated with crutch or butter fly handle screwed for iron pipe or brass ferruleand fixed completeall as specified

S & F in repair 15 mm bore angle valve fancy type half turn chromium plated cast copper alloy high pressure with crutch or butterfly handle screwed ends for iron pipe or for union and fixed all as specified

S & F in repair PVC connection 15x600mm size complete all as specified.

Supply and fix in repairs shower rose, chromium plated brass, fancy type, 100x100 mm, with or without swivel , any size, including concealed stop cock and fixing to steel pipe or union, complete all as directed.

S&F 15 mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe all as directed.

S & F in repair 15 mm bore stop valve fancy type half turn chromium plated cast copper alloy high pressure with crutch or butterfly handle screwed ends for iron pipe or for union and fixed all as specified

S & F in repair 20 mm bore stop valve fancy type chromium plated cast copper alloy high pressure with crutch or butterfly handle screwed ends for iron pipe or for union and fixed all as specified

Demolition of brick work built in cement mortar in any description and position, complete all as specified.

M & L for brick work with sub class 'B' bricks,old size , straight or curved on plan exceeding 6 m mean radius built in CM1:6 complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing)removing serviceable tiles from site and rubbish off the premises complete all as spoecifed and directed.

M&L Glazed ceramic tiles 300x450x7mm thick, in vertical surfaces such as skirting & dados set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat of 10mm thick CM 1:4 on brick masonry/concrete surfaces finished even to receive tiles complete all as specified and as directed.

M&L Non skid ceramic tiles (300x300x7mm thick) in floors set and jointed in neat cement slurry and painted with colour cement to match including Screed bed (or) bedding layer of mortar 15mm thick in cm (1:6) for laying floor finishes complete all as specified and as directed.

Roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dusts etc.complete all as spoecifed and directed.

M&L for non skid ceramic tiles (square/rectangular) 7 to 8 mm thick, area of each tile exc 0.18 sqm but n exc 0.38 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:6 complete all as spoecifed and directed.

All as per item no 67 but on vertical surface/skirting on wall ,ncluding 10 mm thick plaster in cement and sand mortar 1:4 all as spoecifed and directed.

M&L for 18 to 20mm thick black granite slab laid over and including 20 mm thick screeding bedding in CM1:6 on floor or over plateform complete all as specified and as directed .

M & L 75mm th PCC 1:3:6 type C-2 as in plinth protection, finished even and fair without using extra cement complete all as specified.

S & F in repair Aluminium drapery Rod 25mm dia Powder Coated including wooden side caps, brackets, and rings @ 120mm c/c/ complete all as specified and as directed .

M & L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in roof kerbs , rounded or chamfered on edges all as specified and as directed .

“Demolition of cement concrete (reinforced) in roof ,beams, landing, chajja and similar suspended work complete all as specified and directed by Engr-in-Charge.

M&L for Reinforced cement concrete 1:2:4 Type B-1 (20 mm graded agg) slabs supported on wall ,beam and columns in floors ,roofs, landings balconies ,canopies, deck slabs and in shelves & similar items complete all as specified and as directed by Engineer-in-Charge

Form work to soffit of suspended slabs such as roof slabs, floor slabs, landings and similar work, n exc 200mm thick (horizontal or sloping) complete all as specified.

S&F TMT steel bars of 10 mm dia and over,cut to length bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Demolition and breaking up rain water pipes of internal dia of bore 100 mm , (AC,PVC etc) set in any cement mortor of any diameter incl bends.

S&F PVC(SWR) pipes, 110 mm external dia double socketed in any length with rubber joints fixed on wall or ,laid in trenches or floors complete all as specified.

S&F PVC(SWR) bends suitable for 110 mm external dia complete all as specified

S&F PVC (SWR) junction single, (single T) equal or unequal of 110mm dia

S&F PVC (SWR) junction single, (single T) equal or unequal of 75mm dia

M&L for chipping out spilled and loose concrete cover and derusting steel reinforement of concrete column, beam, slab, chajjas, parapets and the like as directed upto 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforecement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guiniting mix using one part of OPC 53 grade and two part of gaggar sand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guiniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out upto 10 metre height) complete as directed at site Note :- (a) After placing the additional reinforecement all concrete surfaces shall be throughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b) when polymix concreting in taking condition,guiniting is done with polycrete admixture @ 2% by weight of cement all as per manufacturers instructions (polycrete admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer). (c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account.

S&F steel window box type made out of 16 gauge steel section for frames & shutters as per drawing No TD-A sheet 01/03 to 03/03 with openable both glass and gauge shutters including pintel hinges 75mm long 12mm dia, 100mm long handle and tower bolt 150mm long, MS hooks & eye 150mm long all as applicable complete all as specified and directed. (Glass & wire mesh shall be paid separately)

S&F PVC(SWR) pipes, 75 mm external dia double socketed in any length with rubber joints fixed on wall or ,laid in trenches or floors complete all as specified.

S&F PVC(SWR) bends suitable for 75 mm external dia complete all as specified

M&L for rendering 15mm thick in cement mortar 1:4 with two coat of tape create mixed (1:2) with cement paste @ 500 gm per sqm as per manufacturere instruction in sunken portion of toilets, finished even and smooth without using extra cement and applying a coat of hot blown bitumen 85/25 grade as the rate of 0.70 kg per sqm and applying one coat of hot blown bitumen 85/25 grade at the rate of 2.6 kg per sqm and one layer of 0.5mm thick fibre tissue over it and finally third layer of hot blown bitumen 85/25 grade at the rate of 2kg per sqm including getting out, complete all as specified.

Material and labour plain cement concrete average 50mm thick 1:2:4 type B0 (stone aggregate) for levelling course laid in slope @ 1:40 and providing APP polymaric water proofing membrene minimum 3mm thick and weighting not less than 3.6 kg / sqm of make 'Moply FP' manufactured by STP Texsa Ltd or' equivelent in other makes as per list, black finished reinforced with non weven polyster matt,with fusable finish laid over compatable bitumen primer at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or abutane gas torch, with over lap of 75mm at the sides and100 at the ends and sealing all as per manufactur's instructions including preparation of surface, complete all as specified and as directed. Note : the water proofing treatment shall be carried out by the manufacturer or their authorised applicators.

M&L machine cut kota stone slab flooring 18-20 mm thick with uniform texture (size not less than 60 Cm on either edge)laid over screed bed 15mm thick in cement morter 1:6 and jointed with grey cement slurry mixed with pigment to match the shed of the slab including rubbing and polished complete all as specified.

M&L kota stone slab with uniform texture of 18-20 mm thick in riser of steps, skirting, dado and pillers in one single piece (size decided by Engineer-in-Charge) laid over cement screed 15mm thick in cement morter 1:4 and jointed with grey cement slurry mixed with pigment to match the shed of the slab including rubbing and polished, bevelled edge of corner complete all as specified.

S&F Steel work in tubular trusses or frame, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, Note :- frame provide over chhajja upto four storey building including scaffolding .

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Note :- The steel sheets,to be provide over MS frame such as chhajja upto four storey building including scaffolding .

M&L for Complete removal exising old surfaces of wall by scrubbing with hard brushing ,brooming down or steel wire brushing scraping down smook root mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water applying 2 mm thick wall care putty and applying two coats of exterior emulsion paint (Weather Coat) over a coat of priming paint etc complete all as specified and directed.

S&F powder coated aluminum frames for windows/ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified.

S&F anodised aluminum glazed/gauzed windows and ventilators shutters Top hung type without sash bar aluminum section weighing 0.55 kg per mtr including necessary jointing cleats glazing clips rubber packing anodised aluminum beading screws including fittings such as i no peg stays 150 mm long, 2 nos aluminim hinges 75 mm long ,2 no tower bolt 100 mm long and 1 no aluminim handle 100 mm long etc in each shutter complete all as specified.

S&F 4 mm thick pin headed glass panes used in anodised aluminum glazed/gauzed windows and ventilators shutters complete all as specified.

M&L 100 mm thick PCC(1:4:8) type D2 using 40mm graded stone aggregate as in sub base of floor and filling as mass conc.

M & L Machine pressed precast concrete PU coated colour interlocking paver block any shape and size, with grey cement and pigment confirming to IS 5658-2006 of 80 mm thickness M-40 Grade complete all as specified

M& L for Chequered cement concrete tiles with pigment 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed complete all as specified

M&L sand filling under floor or in foundations including watering and consolidation complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and exc 1.5 m and nexc 3.0m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Demolition and breaking up drain pipes 150 mm bore (salt glazed stone ware, AC or reinforced concrete type ) set in cement mortar including haunching and benching complete all as specified and as directed

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunchings against the sides of pipe after they are laid and tested for 150 mm dia SGSW pipe complete all as specified & directed.

S&F Salt glazed stone wire drain pipes 150mm laid in trenches and jointed as specified.

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soil complete all as specified.

Removing excavated material (soil) n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified.

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150 mm dia pipes complete all as specified and directed.

Brick work sub class ‘B’ bricks state or curved on plan built in cement mortar 1:4 using old size bricks.complete all as specified directed .

Cement concrete 1:3:6 type C-2(40mm aggregate ) as in foundation manholes.complete all as specified directed by Engr-in-Charge.

M&L P C C ,1:3:6 type C1 (20 mm graded aggrigate)as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item water troughs and the like including weathering, slightly rounded for chamfered angles and throating, all as specified directed .

Cement concrete 1:2:4 type B-2 (40 mm graded aggrigate ) as in surface channels and drains

Rendering 10mm thick on fair face on brick work or conc surfaces finished even and smooth without using extra cement in CM 1:4.complete all as specified

S&F SFRC manhole covers and frame medium duty of overal size n exc 0.6 Sqm each X100mm thick, factory made and test load 10 tonnes (MD-10), strength as per IS: 1726-1991 all as specified and directed .

M&L for precast factory made manhole cover, area of each cover n.exc 0.20 Sqm, 50 mm thick with SFRC concreting including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet complete all as specified.

Taking down carefully copper/aluminium point wiring from wooden battan/ conduits or from the wall by chasing/cutting (light, fan, socket or power) completely including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc. to be measured separately) and making good disturbed surfaces of walls, floor etc.

Taking down old MCCB , TPN DBs , SPN DBs, sp mcb & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed.

Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed.

Taking down old unsv light fitting of any size and make from the site and making good surface complete all as specified and directed.

M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including rigid PVC conduit FRLS, medium grade ,ISI marked ,terminal box of 1.6 mm thick and 3 mm thick hylam sheet cover for terminal boxes also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following : -

(a) One light/fan/bell point controlled by one by one way switch ( switch to be measured and paid separtely)

(b) One light point controlled by two, two way switch ( switch to be measured and paid separtely)

(c) One 3 pin socket outlet 5 hole 5 Amp independent including PVC unsheathed copper conductor 1.5 Sqmm cable as earth wire connected to common earth and to earth dully socket & switches to be measured and paid separately.

(d) -ditto- as above item No 5 (c) but Same board.

One power point with insulated stranded copper conductor cable 4 Sqmm single core and PVC insulated FRLS 1100 Volts unsheathed copper conductor 4 Sqmm stranded conductor as earth wire connected to dolly complete ( socket and switches to be measured and paid separately).

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including PVC conduit for submain wiring and connection complete including rigid PVC conduit FRLS grade,unsheathed copper conuctor cable of 6 Sqmm size stranded conductor as earthwire.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 10 Sqmm in and including PVC conduit for submain wiring and connection complete including rigid PVC conduit FRLS grade,unsheathed copper conuctor cable of 10 Sqmm size stranded conductor as earthwire.

M&L switch piano flush type 5 Amp SP one way .

M&L switch piano flush type 15 Amp SP one way.

M&L socket outlet 5 pin 5 Amp flush type .

M&L socket outlet 2 in 1,3 pin 5/15 Amps.

M&L ceiling rose 3 phase PVC polycorbonate,isolated body.

S & F switch type electronic fan regulator 5 step,360 degree rotation complete all as specified and directed by engr-in charge.

M&L bell push,flush type,5 amp.

M&L bell ding dong AC,230 volts,single pole

M&L angle Lamp holder with metallic ring, PVC/Polycorbonate type with back plate complete.

S & F LED bulb 9 watts, 900 lumens output, 6500K suitable for B-22 base .

M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed

M&L MCB distribution board SPN 8 way with 100 Amp rated bus bar double door.

M&L MCB SPN 40 Amp "C " curve, 10 kA

M&L MCB SP 6 to 32 Amp "C" curve ,10 kA.

Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20-22 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 900 lm system lumen output with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed.

M&L in replacement Decorative wall mounting CITY-1 Decorative wall light fixture made up of Polycarbonate, Including 12 W retrofit LED BULB (B-22 base). NOTE-1: Price of LED bulb included with city -1 fitting.

Supply and fix Web based (AMR Type) single phase 10-60 amps, electric energy meter with LCD display with optical port, base mounting accuracy class 1.0 having provision of manual/automatic meter reading display capability complete all as specified and directed by Engr-in-charge.

Supply and fix 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.

M&L switch piano flush type 5 Amp SP two way .

S&f exhaust fans metallic body AC single phase 230/240 V of size 300 mm sweep with louvre for fixing of exhaust fan complete all as directed by Engr-in-Charge.

M&L for breaking the old existing wall and making provn of a round hole for fixing of 300 mm sweep exhaust fan including making good to the disturbed wall/ portion and matching with existing colour.all as specified and directed.

Supply and fixing wall mounted steel enclosure size of 35cm x 40cmx 14 cm (LXWXH) for housing electric meter made out of 1.6mm CRCA sheet duly powder coated having front opening for meter inspection post with transparent sheet complete, fixed to wall semi recessed in wall complete all as specified and directed by engr-in-charge.Note: sample box to be produced for approval prior to commencement of work.

Supply and fixing ceiling fans AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length and marking of fan no with black paint complete all as directed by Engr-in-Charge.

S&F in repair sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 10 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall with sutable sand and cement, complete all as specified and directed.

S & F Geyser 25 Ltrs, vertical mount, 5 star rated, glass line coated tank with adjustable thermostat, suitable for ,230 volt, 1.5 kw , 50 Hz electric supply

S&f fresh air fan PVC body AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed by Engr-in-Charge.

S & F pressure die cast aluminium housing LED street light luminaires with IP66 deg. of protection suitable for 45 watt LED fitting duly fixed on 40 mm dia GI mast including 50X 6 mm thick MS flat with suitable size of fastner including making connection flexible copper conductor cable from ceiling rose to fitting complete all as specified and directed. Note : The Contractor quoated the rates incl all accessories like suitable GI pipe mast, 50x6 mm thick MS flat, fashner, nut & bolts, suitable length of flexiable wire.

M&L in replacement distribution board TPN 4 way load line DBs IP 43-IK 09 With metal door suitable for provision of MCCB 125 Amp incomer including 200 Amp rated bus bar, also incluiding SP 32 Amp outgoing MCBs, 415 Volts fixed completely all as dircted.

M&L in replacement MCCB 125 Amps, 16 ka , 4P,

S&F factory made epoxy powder coated switch disconnector fuse unit TPN with sheet metal enclosure confirming to IS 60947-3, 200Amps, positive isolation suitable for DIN & Bolted HRC fuse links fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts.

Supply and lay cable in replacement XLPE insulated screened PVC bedded, galvanized steel strip and wire armoured , electric power cables (heany duty) 1100 volts grade with stranded alumimium conductor of size 25 Sqmm 4 core.

Supply and fix GI Pipe 32 mm dia light grade, for laying in road crossing/ fixing of vertically complete all as directed

Supply and spreading clean dry sand in trenches for cushioning/cable protection all as specified and directed

Supply and laying sub clas 'B' Bricks of old size ( 23 x 11 x 7 cm) laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer -in-Charge

AMIT BROTHERS

M/s M M BAHL

L G BUILDERS

n s kumar and sons

The new hut furnitures