Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹10.2 Cr
EMD Value
₹20.2 L
Closing Date
26 Nov 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Construction of HTT 40 Simulator Building including Electrical and Air Conditioning Works at AFS Tambaram, Chennai.
17355
TENDER NOTICE/NCP/36/24-25
Works
Contract Section Civil-FMD-Bangalore
₹0
₹20.2 L
26 Nov 2024
21 Oct 2024
21 Oct 2024
26 Nov 2024
HINDUSTAN AERONAUTICS LIMITED BANGALORE FACILITIES MANAGEMENT DIVISION
NAME OF THE WORK: Construction of HTT 40 Simulator Building including Electrical and Air Conditioning Works at AFS Tambaram, Chennai. CONTRACT NO. HAL/FMD/C-80/24-25
Name of the Contractor :
Sl. No. Specification Quantity Unit Rate in Figs [Excluding GST] Rate in Words Amount
Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with detailed technical specification and tender drawings if any. (4) For BOQ Item No. 101: A performance guarantee bond for 5 years on non-judicial stamp paper of Rs. 500/- shall be given by the contractor. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 5 years from the date of completion of contract / project as a whole.
Part 'I' - Civil Works
1 Removing / transporting the surplus excavated earth including debris, vegetation waste, concrete waste, etc., to a distance upto 5000m / outside IAF premises / to contractor's own yard including loading, unloading, depositing, spreading, levelling, etc., all complete as per directions of Engineer-in-Charge. 1552.00 Cu m #NAME? 0.00
2 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing etc., (exceeding 30 cm in depth, 1.50m in width as well as 10 Sq m on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50m for all lifts with all labour, tools & tackles, plant & machinery, hire & fuel charges, etc., all complete as directed by Engineer-in-Charge. 787.00 Cu m #NAME? 0.00
3 Excavating holes more than 0.10Cu m & upto 0.50Cu m including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., disposing of surplus excavated soil, as directed within a lead of 50m and lift upto 1.50m, etc., all complete as directed by Engineer-in-Charge. 82.00 Nos #NAME? 0.00
4 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains in all kinds of soil (not exceeding 1.50m in width or 10Sq m on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m, etc., all complete as directed by Engineer-in-Charge. 1471.00 Cu m #NAME? 0.00
5 Returning / Filling in available useful excavated earth (excluding rock) free from salts, organic or other deleterious matter (Other than black cotton soil & rock, etc.,) in trenches, plinth, sides of foundations, etc., in layers not exceeding 20cm in depth, consolidating each deposited layer by watering, breaking / removing clods exceeding 50mm, ramming and consolidation, etc., with all labour, tools & tackles, plant & machinery, etc.,lead up to 50m and lift upto 1.50m, etc., all complete as directed by Engineer-in-Charge. 747.00 Cu m #NAME? 0.00
6 Providing and laying in position cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20mm nominal size derived from natural sources) excluding the cost of centering and shuttering - All work up to plinth level, including mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc, but excluding the cost of centering and shuttering, etc., all complete as directed by Engineer-in-Charge. 435.00 Cu m #NAME? 0.00
7 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth, etc., all complete as directed by Engineer-in-Charge. 186.60 Sq m #NAME? 0.00
8 Supplying, mixing and placing plain cement concrete (1:2:4) of required thickness using 20mm nominal size down graded hard stone / granite aggregate in accordance with IS 456 in Cills, fillets, coping, etc., upto floor five level, including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, etc., but excluding the cost of centering, shuttering and finishing, etc., all complete as directed by Engineer-in-Charge. 4.00 Cu m #NAME? 0.00
9 Providing and mixing of waterproofing material in cement concrete / cement plaster works in proportions by weight of cement as per manufacturers specification, etc., all complete as directed by Engineer-in-Charge. 268.00 Per Bag of 50 Kg of Cement #NAME? 0.00
10 Providing and laying in position cement concrete excluding the cost of centering and shuttering for all work up to plinth level including flooring of 1:2:4 (1 cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources), etc., all complete as directed by Engineer-in-Charge. 114.00 Cu m #NAME? 0.00
11 Providing and laying in position ready mixed or site batched M30 Grade with minimum cement content of 350Kgs/m3 design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, PortlandPozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, consolidation, levelling, curing, scaffolding, all materials, labour, carriage for all leads & lifts; but excluding the cost of centering, shuttering, finishing and reinforcement, etc., all complete as directed by Engineer-in-Charge. Note: (i) Site design mix to be obtained from Govt. / NABL laboratory for site batching concrete. (ii) Small quantity is as approved by EIC in volumetric proportion.
a) All works upto plinth level including necessary openings and packing if any for laying pipes, cables, etc., 517.00 Cu m #NAME? 0.00
b) All works above plinth level upto floor V level including necessary openings and packing if any for laying pipes, cables, etc., 490.00 Cu m #NAME? 0.00
12 Formwork (Centering and shuttering including strutting, propping etc, and removal of form) for the following RCC members which are defined as below, in fair finished by providing timber, wooden planks, runners / M.S. sheets with all supports, struts, braces, wedges, scaffolds, bracings, ladders, gangways, dressing with oil including M.S. bolts nuts and washers, temporary openings, filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including making temporary openings in the forms for pouring concrete, etc., all complete as directed by the Engineer-in-Charge for the sub-items mentioned below. Note: Formwork material is contractor's own property and shall be removed after completion of work.
a) Foundations, footings, bases of columns,bed concrete,ramp concrete, pedestal, etc., for mass concrete 785.00 Sq m #NAME? 0.00
b) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses, etc., 1088.00 Sq m #NAME? 0.00
C) For Roofs, landings,suspended floors, Slabs supported on walls, roofs, landings, balconies, access platforms, Gutters, decks, etc., 799.00 Sq m #NAME? 0.00
d) Plinth beams, Lintels, Beams, room beams, beams,girders, bressumers and cantilevers, etc., 1860.00 Sq m #NAME? 0.00
e) For Columns, Pillars, Piers, etc., 996.00 Sq m #NAME? 0.00
f) Chajja, Weather shade,Canopies, Corbels, etc,, including edges 62.00 Sq m #NAME? 0.00
g) Stairs, (excluding landings) except spiral-staircases 44.00 Sq m #NAME? 0.00
h) Edges of slabs and breaks in floors and walls under 20cm wide 344.00 R m #NAME? 0.00
i) Extra for additional height in centering, shuttering for Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, at Height of round 4.5m against 3.60m standrad height (Plan area to be measured). 433.00 Sq m #NAME? 0.00
j) Extra for additional height in centering, shuttering for Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels at a height of around 5.5m height against 3.6m standard height ( plan area to be measured). 75.00 Sq m #NAME? 0.00
l) Extra for additional height in centering, shuttering for Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, at a height of arund 7.50 m against standard height of 3.6m .(Plan area to be measured). 64.00 Sq m #NAME? 0.00
m) Extra for additional height in centering, shuttering for Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, height of around 13.00 m against 3.6m standard height (Plan area to be measured). 215.00 Sq m #NAME? 0.00
13 Supplying, straightening, fabricating (cutting & bending), placing in position and binding steel reinforcement of TMT bars of not less than Fe 500 D conforming to IS 1786 for all concrete reinforcment members / works above / below plinth level, including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.90mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it, etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge. Note: a) Only authorized laps, chairs etc. shall be considered for measurement. b) The exposed Reinforcement bars shall be coated with cement slurry. 129665.00 Kgs #NAME? 0.00
14 Brick work with common burnt clay bricks of class designation 7.5 in foundation and plinth level in all shapes and sizes, including hoisting and setting in position with cement mortar 1:6 (1 cement : 6 coarse sand) and along with necessary finishing, making or leaving holes & chases and making good, etc., all complete as directed by the Engineer-in-Charge. 6.00 Cum #NAME? 0.00
15 Brick work with common burnt clay bricks of class designation 7.5 in superstructure above plinth level in all shapes and sizes, including hoisting and setting in position with cement mortar 1:6 (1 cement : 6 coarse sand) and along with necessary finishing, making or leaving holes & chases and making good, etc., all complete as directed by the Engineer-in-Charge. 359.00 Cum #NAME? 0.00
16 Half brick masonry with common burnt clay bricks of class designation 7.5 in superstructure above plinth level in all shapes and sizes, including hoisting and setting in position with cement mortar 1:4 (1 cement : 4 coarse sand) and along with necessary finishing, making or leaving holes & chases and making good, etc., all complete as directed by the Engineer-in-Charge. 6.00 Sq m #NAME? 0.00
17 Construction of Coursed rubble masonry (first sort) in cement mortar (1:6) (1 cement : 6 coarse sand) with hard stone, solidly hearted faces, beds and joints squared back, in foundation and below plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level, raking out joints 10mm deep, curing, providing weep holes if any, etc., all complete as directed by the Engineer-in-Charge. 41.00 Cum #NAME? 0.00
18 Designing, fabricating, testing, installing and fixing in position Curtain Wall system comprising of ACP & Tinted glass of approved colour and design with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc and with structural sealant, including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc and also with 6mm thick high performance glass. 396.00 Sqm #NAME? 0.00
(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts, SS Screws, SS bolts with washer of different sizes for structural glazing/ACP Cladding, all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm up to two decimal places.
For ACP Cladding in curtain wall
19 For Glazing in Curtail wall i.e a Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc., and also having the properties as visible light transmittance(VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc., all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in- Charge. 14.00 Sqm #NAME? 0.00
20 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt of Wedge expansion type, etc., all complete as directed by the Engineer-in-Charge.
a) Fastener with threaded dia 6mm each 100.00 Nos #NAME? 0.00
b) Fastener with threaded dia 10mm each 120.00 Nos #NAME? 0.00
21 Providing and fixing Ceramic glazed wall tiles / Matt Vitrified tiles, conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge,in skirting / dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and set & jointing with neat grey cement slurry @ 3.3Kgs per Sq m, including pointing in white cement mixed with pigment of matching shade complete , including machine cutting, curing, etc., all complete as directed by the Engineer-in-Charge. Note: Quoted rate shall be inclusive of screed, pointing, etc., 199.00 Sqm #NAME? 0.00
22 Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite stone slab of colour black, Cherry / Ruby red and area of slab over 0.50Sq m for kitchen platforms, pantry, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand)/ fixed over Plywood counter etc., joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish, pointing, etc., at all levels, etc., all complete as directed by the Engineer-in-Charge. 6.00 Sqm #NAME? 0.00
23 Providing opening of required size & shape for wash basin / kitchen sink in kitchen platform, pantry, vanity counter and similar location in marble / Granite / stone work, including necessary holes for pillar taps, etc., including moulding, rubbing and polishing of cut edges, etc., all complete as directed by the Engineer-in-Charge. 1.00 No #NAME? 0.00
24 Providing and fixing M.S. grills of required pattern to steel windows / walls / in frames of windows, ventilators, etc., and approved design using MS structurals such as M.S flats, angles, round/square bars, etc., including necessary cutting, welding, embedding in concrete, masonry etc., including priming coat with approved steel primer, etc., all complete as directed by the Engineer-in-Charge. 510.00 Kgs #NAME? 0.00
25 Providing and fixing fire resistant door frame of section [143 x 57]mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gms/Sq m) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size [10 x 4]mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer including necessary accessories, etc., all complete as directed by the Engineer-in-Charge. 19.00 R m #NAME? 0.00
26 Providing and fixing 50mm thick glazed fire resistant door shutters with view panel of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-Charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100mm wide, bottom rail 200mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gms/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer, etc., all complete as directed by the Engineer-in-Charge. 13.00 Sq m #NAME? 0.00
27 Providing and fixing panic bar / latch (Double point) to the fire resistant door fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in-Charge. 2.00 Nos #NAME? 0.00
28 Providing and fixing Fly proof stainless steel grade 304 wire gauge with 0.50mm dia. wire and 1.40mm wide aperture to the windows, ventilators, etc., all complete as per the architectural drawings and the directions of Engineer-in-Charge . 19.00 Sq m #NAME? 0.00
29 Supplying, fabricating and fixing second class teak wooden plain, solid, straight chowkats and frames of doors, windows, partitions, wall panelling frames and other frames, wrought framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and fixed to wall or in position with hold fast lugs or with dash fasteners of required dia & length, etc., all complete as directed by the Engineer-in-Charge. Note: Hold fast lugs or dash fastener shall be paid separately. 5.89 Cu m #NAME? 0.00
30 Providing, fabricating and fixing 30mm thick flush door shutters for Toilet entrance conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood & lipping with 2nd class teak wood battens 25mm minimum depth on all edges and well matched teak 3ply veneering with vertical grains or cross bands including ISI marked Stainless Steel butt hinges with necessary screws and face veneers on both faces of shutters and provision of rebates, suitable blocks for taking mortice locks, latches or other fittings, fitting to frames/chowkats, etc., all complete as directed by the Engineer-in-Charge. 9.00 Sq m #NAME? 0.00
31 Providing, fabricating and fixing 35mm thick flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood & lipping with 2nd class teak wood battens 25mm minimum depth on all edges and well matched commercial 3ply veneering with vertical grains or cross bands including ISI marked Stainless Steel butt hinges with necessary screws and face veneers on both faces of shutters and provision of rebates, suitable blocks for taking mortice locks, latches or other fittings, fitting to frames/chowkats, etc., all complete as directed by the Engineer-in-Charge. Note: Fittings / hardware shall be paid separately. 27.00 Sq m #NAME? 0.00
32 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of [32 x 15]mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, etc., all complete as directed by the Engineer-in-Charge. 40.00 R m #NAME? 0.00
33 Providing and fixing to existing door frames 30mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels, including provision of internal wood lipping, rebates, suitable blocks for taking mortice locks, latches or other fittings, fitting to frames/chowkats etc., conforming to IS: 14856, etc., all complete as directed by the Engineer-in-Charge. 13.00 Sq m #NAME? 0.00
34 Providing [40 x 5]mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block [30 x 10 x 15]cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size), etc., all complete as directed by the Engineer-in-Charge. 56.00 Nos #NAME? 0.00
35 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc, all complete as directed by the Engineer-in-Charge. 13.00 Nos #NAME? 0.00
36 Providing and fixing bright finished brass 100mm mortice latch and lock of 6 levers, vertical type, and a pair of lever brass handles of approved quality, polished bright of approved manufacture to door with all necessary screws, bolts, nuts and washers of approved manufacture, etc., all complete as directed by Engineer-in-Charge. 12.00 Nos #NAME? 0.00
37 Supplying and fixing the Polished (bright finished) brass barrel type tower bolts 250mm long X 10mm with barrel of extruded sections of brass, of approved make and rolled or drawn brass bolt, design to door with all required screws, bolts, nuts, washers etc., conforming to IS 204 (Part 2), etc., all complete as directed by the Engineer-in-Charge. 24.00 Nos #NAME? 0.00
38 Providing and fixing aluminium sliding door bolts(aldrop) of [250 x 16]mm , ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws, etc, all complete as directed by the Engineer-in-Charge. 4.00 Nos #NAME? 0.00
39 Providing and fixing 20mm dia chromium plated brass curtain rod /Towel rail of 600mm long having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary, etc., all complete as directed by the Engineer-in-Charge. 4.00 Nos #NAME? 0.00
40 Providing and fixing aluminium handles of 125mm size, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws, etc., all complete as directed by the Engineer-in-Charge. 4.00 Nos #NAME? 0.00
41 Providing and fixing aluminium tower bolts of size [250 X 10]mm , ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws, etc., all complete as directed by the Engineer-in-Charge. 4.00 Nos #NAME? 0.00
42 Providing and fixing bright finished brass butt hinges [125 X 70 X 4] mm with necessary screws, etc., all complete as directed by the Engineer-in-Charge. 52.00 Nos #NAME? 0.00
43 Providing and fixing ISI marked aluminium butt hinges [125 X 75 X 4]mm anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyedto required colour or shade with necessary screws, etc., all complete as directed by the Engineer-in-Charge. 8.00 Nos #NAME? 0.00
44 Providing and fixing aluminium hanging floor single rubber door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws, etc., all complete as directed by the Engineer-in-Charge. 2.00 Nos #NAME? 0.00
45 Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary accessories and screws, etc., all complete as directed by the Engineer-in-Charge. 2.00 Nos #NAME? 0.00
46 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564), embossed on the body, with double speed adjustment with necessary accessories and screws, etc., all complete as directed by the Engineer-in-Charge. 2.00 Nos #NAME? 0.00
47 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, with double speed adjustment with necessary accessories and screws, etc., all complete as directed by the Engineer-in-Charge. 2.00 Nos #NAME? 0.00
48 Providing and fixing stainless steel fancy handle of 200mm to fire rated doors of approved make fixed with SS screws, etc., all complete as directed by the Engineer-in-Charge. 4.00 Nos #NAME? 0.00
49 Providing and fixing heavy sheet float glass panes of 5mm thickness in View panel of fire rated doors, in glazed doors, windows and celestory windows shutters, etc., all complete as per the architectural drawings and the directions of Engineer-in-Charge. (Area of opening for glass panes excluding portion inside rebate shall be measurfed for payment). 0.60 Sq m #NAME? 0.00
50 Structural steel work riveted, bolted or welded in built up sections, trusses, ladders,chequered plates, staircase, fencing and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, etc., all complete as directed by the Engineer-in-Charge. 8780.23 Kgs #NAME? 0.00
51 Providing and fixing stainless steel ( Grade 304) railing of approved size/design by welding, etc., made of Hollow tubes, channels, plates, etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-Charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.), etc., all complete as directed by the Engineer-in-Charge. 875.00 Kgs #NAME? 0.00
52 Providing and laying Double Charged vitrified floor tiles polished finish size of tile Size of [600 X 600]mm or nearest available size in floors over a screed of cement mortar (1:4) 20mm thick for Paper Joint (Thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement: 4 course sand), including grouting the joints with grey cement slurry @ 3.3 Kg/Sqm including grouting the joints with white cement and matching pigments, etc., all complete as directed by the Engineer-in-Charge. 385.00 Sq m #NAME? 0.00
53 Providing and laying Glazed vitrified tiles Matt / Anti skid polished finish size in floors as indicated below for Paper Joint of tile size of [600 X 600]mm / as per site required size (Thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement: 4 course sand), including grouting the joints with grey cement slurry @ 3.3 Kgs/Sq m including machine cutting, grouting the joints with white cement and matching pigments, etc., all complete as directed by the Engineer-in-Charge. Note: Quoted rate shall be inclusive of screed, pointing etc., 85.00 Sq m #NAME? 0.00
54 Providing and laying Vitrified tiles in Skirting over a screed of cement mortar (1:3) -Size of Tile [600 x 600]mm or nearest size available (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 Kgs/Sq m including grouting the joint with white cement & matching pigments, etc., all, complete as directed by he Engineer-in-Charge. 22.00 Sq m #NAME? 0.00
55 Providing and laying Polished Granite stone slab colour of Black, Cherry / Ruby Red or equivalent for flooring and steps including treads & risers in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing, etc., all complete as specified and as directed by the Engineer-in-Charge. 116.00 Sq m #NAME? 0.00
56 Providing and laying flamed finish Granite stone of Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent colour for flooring, ramps in required design and patterns, for ramps, flooring and steps including treads & risers in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing, round nosing, etc., all complete as specified and as directed by the Engineer-in-Charge. 50.00 Sq m #NAME? 0.00
57 Providing and fixing removable raised/false access flooring of 300 mm Finished Floor Height (FFH) with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of: (a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug. (b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge. 181.00 Sq m #NAME? 0.00
(C) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure the quality of the product.
58 Providing, fixing, testing and commissioning single socketed pipes of 110mm dia, on wall face unplasticised Rigid PVC rain water pipes of 6 kg/cm² SWR grade and of approved make conforming to IS : 13592 Type A, including jointing together with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion and all necessary fittings & specials, bends, branches, sockets, clamps, pipe cutting and wastages, cutting and making good the walls, connecting to existing lines etc., along with removal of existing rain water pipes, etc., all complete as directed by the Engineer-in-Charge. 209.00 R m #NAME? 0.00
59 Providing, applying and laying 12mm thick cement plaster work in for internal / External areas of Ceilings, Chajjas, etc., in CM (1:4) including forming grooves notexceeding 10mm wide and n.exc 10mm deep as per requirement as directed including preparation of surface by hacking, etc., at all levels with necesary materials, labour, scaffoldings, curing, tools and tackles, plants, etc., threading if any as directed, etc., all complete as directed by the Engineer-in-Charge. 185.00 Sq m #NAME? 0.00
60 Providing, applying and laying cement mortar (1:6) plastering 15mm thick on brick / solid blocks / concrete surfaces, finished even and smooth with trowel for Internal / External walls, etc., including supply and fixing of hexagonal chicken mesh minimum 150mm wide having opening [20 x 20]mm of 26 gauge at juncitons of concrete & brick work or between different material, including making grooves as per the requirement not exceeding 10mm width and not exceeding 10mm deep with necesary materials, labour, scaffolding, curing, tools and tackles, etc., at all heights, all complete as directed by the Engineer-in-Charge. 2491.00 Sq m #NAME? 0.00
61 Providing, applying and laying 18 mm thick cement plaster work in two coats for external areas as directed. First coat 12 mm thick in cement mortar (1:5) made rough to recieve top coat, second coat 6 mm thick in cement mortar (1:6) , final surface finished with a floating coat of neat cement after necessary preparation of surface, at all levels including supply and fixing of hexagonal chicken mesh minimum 150 mm wide having opening 20 mm x 20 mm of 26 gauge at juncitons of concrete & brick work or between different material, with necesary materials, labour, scaffoldings, curing, tools and tackles, plants etc., threading if any as directed, etc., all complete as directed by the Engineer-in-Charge. 2135.00 Sq m #NAME? 0.00
62 Painting newly plastered external surfaces with two or more coats applied at 1.43 litre /10 Sq m / as per manufacturer specifications of 100% premium acrylic emulsion paint having VOC less than 50 grams/ litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint with silicon additives of approved make, colour, shade, tint & pattern at all levels, over and including a coat of approved acrylic primer including preparing the surface by removing loose dirt and any organic growth, filling of cracks, necessary scaffolding, etc., all complete as directed by the Engineer-in-Charge. Note: The paint shall have anti-algal, anti-fungal, UV resistant & anti-tarnishing qualities with 100% acrylic base and silicon or elastomeric additives. 2105.00 Sq m #NAME? 0.00
63 Painting Wooden surfaces of any description with two coats of synthetic enamel paint conforming to IS 2932, of approved colour and manufacture over a coat of primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content,with ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams / litre including preparation of surface by rubbing with fine grade of abrasive paper to ensure smooth and even surface, applying knifing paste filler putty before painting the first coat, etc., all complete as directed by the Engineer-in-Charge. 48.00 Sq m #NAME? 0.00
64 Painting Steel surfaces of any description with two coats of synthetic enamel paint of approved colour, brand and manufacture to give an even shade, including preparation of surface by rubbing with fine grade of abrasive paper to ensure smooth, etc., all complete as directed by the Engineer-in-Charge. 420.00 Sq m #NAME? 0.00
65 Painting newly plastered interior surfaces with two coats of premium acrylic emulsion paint of interior grade having VOC (Volatile Organic Compound) content less than 50 grams / litre conforming to IS 15489, of approved make, brand, colour and texture, shade, tint, manufacture & pattern at all levels, including preparing the surface by removing loose dirt and any organic growth, smoothening the surface by using suitable emery paper, filling crevices and finishing even and smooth by providing and applying white cement based putty of average thickness of 1mm in 2 coats of approved brand and manufacture over the plastered wall surface and followed by the applying priming coat with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on applied putty having VOC content less than 50 grams/litre, necessary scaffolding, etc., all complete as directed by the Engineer-in-Charge. 2540.00 Sq m #NAME? 0.00
66 French Polishing on wood work on New work with two or more coats including a coat of wood filler, etc., all complete as directed by the Engineer-in-Charge. 82.00 Sq m #NAME? 0.00
67 Extra for plastering exterior walls of height more than 10m from ground level upto a height of around 14m, etc., all complete as directed by the Engineer-in-Charge. 113.00 Sq m #NAME? 0.00
68 Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, etc., all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) 42.00 Per 14Cm depth per 2.50Cm width per Metre Length #NAME? 0.00
69 Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements using grade 'A' sealing compound conforming to IS: 1834 etc., all complete as per direction of the Engineer-in-Charge 161.00 Per Cm depth per Cm width per Metre Length #NAME? 0.00
70 Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements using grade 'A' sealing compound conforming to IS: 1834, etc., all complete as per direction of the Engineer-in-Charge 42.00 Per Cm depth per 2.50Cm width per Metre Length #NAME? 0.00
71 Supplying, Laying and compacting of granular sub-base in flooring, subbases, ramps, etc., upto plinth level of requisite grading by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, etc., complete as per specifications and directions of Engineer-in-Charge. 474.00 Cu m #NAME? 0.00
72 Providing and placing in position 100mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site, etc., all complete as per direction of Engineer-in-Charge. 295.00 Sq m #NAME? 0.00
73 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 53.00 Cu m #NAME? 0.00
74 Providing and laying design mix cement concrete of M-40 grade manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer in roads / hardstandings / ramps using cement content as per design mix, using coarse sand and graded stone aggregate of approve size in appropriate proportions as per approved & specified design criteria, laying over reinforcement, spreading and compacting mechanically by using needle vibrator, levelling to the required slope/camber, finishing with required texture including steel form work with sturdy M.S channel sections, curing making provision for contraction/expansion joints, construction and longitudinal joints (10mm wide X 50mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealent, complete as per the drawings/directions of EIC. Note: Cement content considered in M-40 is @ 400 kg/Cu m. 215.00 Cu m #NAME? 0.00
75 Providing and fixing G.I. chain link fabric fencing made of G.I. wire of dia 4 mm and of required width in mesh size [50 x 50]mm including strengthening with 2mm dia wire or nuts, bolts and washers as required, etc., complete as per the direction of Engineer-in-charge. 365.00 Sq m #NAME? 0.00
76 Providing and fixing, testing and commissioning 8 mm dia C.P. / S.S. Jet ( health faucet ) with flexible tube upto 1metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved with necessary fittings, etc., all complete as directed by the Engineer-in-Charge. 8.00 Nos #NAME? 0.00
77 Providing and fixing of toilet paper holder of C.P brass type, etc., all complete as specified and directed by Engineer-in-Charge. 8.00 Nos #NAME? 0.00
78 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size [610 x 390 x 370]mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets embedded in cement mortar (1:3), connecting the waste pipe to floor trap with all necessary fittings and accessories like 32mm dia semi-rigid PVC waste pipe(concealed in the wall) including PVC waste fittings, clamps, etc., all as per manufacturers specification and direction of Engineer-in-charge. 4.00 Nos #NAME? 0.00
79 Providing and fixing [600 x 450]mm beveled edge mirror of min. 4mm thick superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers, etc., all complete as directed by the Engineer-in-Charge. 8.00 Nos #NAME? 0.00
80 Providing and fixing White Vitreous China Wash basin of size [630 x 450]mm or nearest available size of approved make with a pair of 15mm C.P. brass pillar tap of approved model & make, C.I. brackets, 32mm C.P. brass waste fitting, 32mm dia semi-rigid PVC waste pipe, including painting of fittings and brackets, cutting and making good the walls, connecting to floor trap and with all necessary fittings and accessories, etc., wherever require, etc., all complete as directed by the Engineer-in-Charge. 8.00 Nos #NAME? 0.00
81 Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour, etc., all complete as directed by the Engineer-in-Charge. 8.00 Nos #NAME? 0.00
82 Providing, fixing, testing and commissioning trap (floor trap) of approved make with 100mm inlet and 75mm outlet of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors , connection with PVC soil / waste pipe, necessary 150mm thick cement concrete (1:2:4) for embedding the trap, etc., all complete as directed by the Engineer-in-Charge. 20.00 Nos #NAME? 0.00
83 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink with drain board as per IS:13983 of approx size [510 X 1040]mm and bowl depth of 250mm with C.I. brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required, etc., all complete as directed by the Engineer-in-Charge. 1.00 No #NAME? 0.00
84 Providing and fixing Sand cast iron S&S pipe as per IS: 1729 soil, waste and vent pipes of 100mm dia, etc., all complete as directed by the Engineer-in-Charge. 2.00 R m #NAME? 0.00
85 Providing and fixing of ball valve (brass) 25mm nominal bore dia, of approved quality, High or low pressure, with plastic floats, screwed for iron pipe or brass ferrule and fixed, including necessary fittings i.e flynut, etc., all complete as directed by the Engineer-in-Charge. 1.00 No #NAME? 0.00
86 Providing and placing in position at terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes, etc., all complete as directed by the Engineer-in-Charge. 2000.00 Per Litre #NAME? 0.00
87 Supplying, jointing, testing and commissioning, approved make GM body gate valves with C.I wheel and screwed ends, etc., complete all as directed by the Engineer-in-Charge.
a) 25mm GM body gate valve 1.00 No #NAME? 0.00
b) 50mm GM body gate valve 1.00 No #NAME? 0.00
88 Providing and fixing PTMT angle stop cock 15mm nominal bore, weighing not less than 85 gms fixed to the health faucet, etc., all complete as directed by the Engineer-in-Charge. 8.00 Nos #NAME? 0.00
89 Providing and fixing C.P. brass bib cock of 15mm nominal bore dia and approved quality conforming to IS:8931, etc., all complete as directed by the Engineer-in-Charge. 16.00 Nos #NAME? 0.00
90 Providing and fixing Concealed Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, fixing the pipe with clamps at 1.00m spacing, necessary reducers, tank adaptors etc. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints and making good the walls, etc., all complete as directed by the Engineer-in-Charge.
a) 15mm dia 100.00 R m #NAME? 0.00
b) 20mm dia 10.00 R m #NAME? 0.00
c) 25mm dia 25.00 R m #NAME? 0.00
d) 32mm dia 20.00 R m #NAME? 0.00
91 Providing and fixing 40mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 5.00 R m #NAME? 0.00
92 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints, etc., all complete as directed by the Engineer-in-Charge.
a) 100mm dia RCC Pipe. 16.00 R m #NAME? 0.00
b) 300mm dia RCC Pipe 16.00 R m #NAME? 0.00
93 Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910,on 12mm dia steel bar conforming to IS: 1786, having minimum cross section as [23 x 25]mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections in tail lenth on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per spcifications and having manufacture's permannt identification mark to be visible even after fixing, including fixing in manholes with [30 x 20 x 15]cm cement concrete block 1:3:6 ( 1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size), etc., all complete as per design & as per direction of Engineer-in-Charge. 14.00 Nos #NAME? 0.00
94 Providing and fixing in position pre-cast R.C.C. manhole cover M D - 10 of Circular shape 500mm internal diameter and frame of required shape and approved quality, etc., all complete as directed by the Engineer-in-Charge. 1.00 No #NAME? 0.00
95 Making Soak pit 2.50m diameter 3.0metre deep with [45 x 45]cm dry brick honey comb shaft with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 and S.W. drain pipe 100mm diameter, 1.80m long including necessary earthwork excavation, cutting of hole for the pipe line, brick bats, brick aggregates, sand filling, RCC cover Slabs, etc., all complete as per standard design & as per direction of Engineer-in-Charge. 1.00 No #NAME? 0.00
96 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) [600 x 850]mm & upto 450mm internal dimensions, total weight of cover with frame to be not less than 38Kgs (weight of cover 23Kgs and weight of frame 15Kgs), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete, etc., complete as per standard design & as per direction of Engineer-in-Charge. 1.00 No #NAME? 0.00
97 Providing, fabricating and fixing aluminium work for partitions, Curtain wall frames, flats, covers, Ventilators, Windows, louvers, doors, etc frame work., (Min. thickness of powder coating 50 microns) made up of aluminium extruded sections, Ventilators: conforming to designaton 63400 of IS 1285 and of approved make, Sliding Window Frame: Top and side sections of the frame s to accomodate the shutter section. d) Bottom section of the frame shall be with gutter and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, e) Shutters are to be provided with galss of approved size for two shutters and stainless steel fly proof mesh for one shutter fixed with good quality tapered aluminium interlocking screwless snap on type glazing clip not less than 0.90mm thick. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing, Panelling, fly proof mesh will be paid seperately). 4446.00 Kgs #NAME? 0.00
98 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions, etc., With float glass panes of 5mm thickness (weight not less than 12.50Kgs / Sq m) along with EPDM rubber / neoprene gasket, etc., all complete as per the architectural drawings, etc., all complete as directed by the Engineer-in-Charge. 102.00 Sq m #NAME? 0.00
99 Aluminium work for shutters of doors, windows i.e Powder coated aluminium windows (minimum thickness of powder coating 50 micron) & ventilators in moving position including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required including necessary accessories, all complete as per the architectural drawings, etc., all complete as directed by the Engineer-in-Charge. 552.00 Kgs #NAME? 0.00
100 Providing and fixing 12mm thick prelaminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws, etc., complete as per architectural drawings, etc., all complete as directed by the Engineer-in-Charge. 47.00 Sq m #NAME? 0.00
101 Providing and laying integral cement based water proofing treatment With average thickness of 120mm and minimum thickness at khurra as 65mm. including preparation of surface as required for treatment of roofs, (a) Applying a slurry coat of neat cement using 2.75Kgs / Sq m of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75Kgs / Sq m of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. (d) Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of [300 x 300]mm square 3mm deep. 751.00 Sq m #NAME? 0.00
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge . Note: (i) A performance guarantee bond for 5 years on non-judicial stamp paper of Rs. 500/- shall be given by the contractor. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 5 years from the date of completion of contract / project as a whole. (ii) Plan area shall be measured for payment. (iii) The quoted rate shall be for the entire work and nothing extra shall be paid on this account.
102 Providing and fixing mineral fibre false ceiling tiles With 16mm thick beveled tegular mineral fibre false ceiling tile at all heights of size [595 X 595]mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33mm thick (galvanized @120 gsm) comprising of main T runners of [15 x 32]mm of length 3000 mm, cross T of size [15 x 32]mm of length 1200mm and secondary intermediate cross T of size [5 x 32]mm of length 600mm to form grid module of size [600 x 600]mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50mm long 8mm outer diameter M-6 dash fasteners, 6mm diameter fully threaded hanger rod up to 1000mm length and L-shape level adjuster of size [85 x 25 x 2]mm, spaced at 1200mm centre to centre along main ‘T’. The system should rest on periphery walls / partitions with the help of GI perimeter wall angle of size [24 x 24 X 3000]mm made of 0.40mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450mm centre to centre & 40mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings, etc., all complete as directed by the Engineer-in-Charge. 516.00 Sq m #NAME? 0.00
103 Supplying and Fixing of Curvilinear Urinal Partitions Plates / wall made out of 8mm thick glass with frosting and fixed to the walls with SS fittings of size 900 H and 450mm W at requisite levels as per the manufacturers instruction including necessary screws, fittings and fixures, etc., all complete as directed by the Engineer-in-Charge. 4.00 Nos #NAME? 0.00
104 Supplying, laying, testing and commissioning the following dia PVC pipes of 6Kgs / cm² SWR grade and of approved make with rubber ring joints conforming to IS 5382, jointed together with solvent, in trenches and floors, including all necessary fittings & specials, bends, branches, sockets, pipe cutting and wastages, cutting and making good the floors, etc., all complete as directed by the Engineer-in-Charge.
a) 75mm dia 40.00 R m #NAME? 0.00
b) 110mm dia 55.00 R m #NAME? 0.00
105 Providing and fixing (Jaguar make) C.P liquid soap holder with dispenser of available size and standard shape with bracket of the same materials with snap fittings of approved quality and colour, including cutting and making good the walls, etc., all complete as directed by the Engineer-in-Charge. 8.00 Nos #NAME? 0.00
106 Providing and fixing (Jaguar make) C.P brass Angle cock with all necessary fittings along with washers,leak proof rubber gasket arrangement etc and packing with white cement, etc., all complete as directed by the Engineer-in-Charge. 8.00 Nos #NAME? 0.00
107 Providing and fixing Wall mounted White Vitreous china Water Closet (Hindware or Jaguar) with ISI marked, auto close white solid plastic seat and lid with concealed S.S flush valve fixed over steel plate, with suitable stop cock, angle cocks, Health faucets, etc., with all connecting fittings and fixtures to make it operational completely, including cutting and making good the walls and floors wherever required, etc., all complete as directed by the Engineer-in-Charge. 8.00 Nos #NAME? 0.00
108 Supply and Installation of ES200 Easy upto 4.15mtr Full System, Auto sensor Double Sliding door - Type A, Mechanical Glass Clamping Rail- 1050mm- 2Nos, Floor guide 2 No, (Safety & Motion) Combo, Five Position Program Switch with knob, Cable for Program Switch along with 12mm Glass Tuffened sliding Glass of opening gap of 5 feet (2.5 feet 2 Nos) or as per site conditions and side 4 feet 2No.s fixed glass or as per site conditions along with suitable frame work, etc., all complete as directed by the Engineer-in-Charge. [The rate quoted is for all the necessary hardware, fitting etc, all complete nothing extra will be paid except for varition in quantity]. 16.00 Sq m #NAME? 0.00
109 Supplying and fixing Motorized G.I. rolling shutter, made of approximate size [5 X 5]m and approved make. The curtain shall be constructed from Tata Bluescope/JSW 150 gsm single skinned galvalume steel laths with natural finish of min. 1.25mm thickness and interlocking distance of min 75mm. Side guides shall be made of min. 2 or 3.15mm thick heavy duty TG Galvanised steel, as per the site requirement, along with necessary fixtures like cleats(spacing shall not exceed 0.75m) or supports brackets for attachments to the walls or column by screws or bolts and necessary seals.The size of the guide channels shall be conforming to Is:6248-1979. Single piece G.I. Heavy duty mild steel suspension shaft along with roller of sufficient diameter with springs shall be provided along with necessary hexagonal bracket plate of min 3.15mm thickness, size conforming to Is:6248-1979 and square bar, if necessary. The provision of Pressed galvalume steel hood cover with reinforced bracket as required to suit the shutter width and motor cover with natural finish of min. 0.90mm thick and of reuired shape along with necessary fixtures and stiffeners like angle cleats, angle or flat stiffeners, etc., shall be provided. Bottom profile shall be of G.I. plate with angle stiffner. The bottom rail shall be fixed with extruded rubber bottom seal that shall seal against the floor when the door is fully closed. 23.00 Sq m #NAME? 0.00
The CE Certified CRS Compact Gear motorised system shall be indirect drive type along with system power supply wired with industrial plug and three station push button/ switch with deadman control and arrangements for inside and outside locking. A provision of suitable safety devices/system like inbuilt limit switches, External safety brake's,Control switch,etc are to be provided in accordance with EN 14121-1:2007 Safety of machinery. Provision shall be made for manual operation by hand chain in emergency condition, all complete & fully operational. The rate is inclusive of two coats of painting, of approved shade and manufacture, over a coat of grey epoxy primer by spray including preparation of surface, all materials, labour, machinery, tools and tackels, etc., all complete as directed by the Engineer-in-Charge. Note: (i) Clear opening shall be measured for payment. (ii) The quoted rate shall be for the entire work and making it operational..
110 Tensile Fabric Carparking System: [ Design Build]: Design, Supply and Installation of Cantilever Strcture Tensile Fabric Structure as per the scheme attached in the drawing comprising of Primary Structural members, Secondary structural members, Tensile Fabric/Membrane, including all the tools, tackels, stagging, etc., The structure shall be with detailed description as indicated below: Guarantee: The structure shall be designed for a life of 50 years and Tensile Fabric Material shall be for minimum like of 10 years. The 5% of the this specific works will be retained for a period of 10 years. Mode of Measurement: The curved area of the fabric at Top level will be measured Cantilever with the Tentative Scheme at per attached drawing ) comprising of the following : The Agnecy has to design the structure as per the relavent IS codes like : i. The structure to be designed with dead load as per IS 875 (Part-1). ii. Imposed loads as per IS 875 (Part2), Wind loads as per IS 875 (Part3) and applicable seismic loads as per IS 13920 for the respective zone. iii. The detailed 3D Model indiacting all the members considered to be submitted to HAL before commencement of work. iv. The Proof Checking of the Design shall be submitted from any of the following institutes/agencies Structural Engineering Research Centre [SERC] Construction Industries Development Council Central Building Research Center Indian Institute of Science, Bangalore. 280.00 Sq m #NAME? 0.00
National Institute of Technology. NABL accrediated Laboratory-Agency Certified firm. v. Primary Structural Members: The primary structural members shall be made with MS tubular sections/SHS made by M/s.TATA/JINDAL having Yiled Strength of 355 Mpa and same shall be coated with anti-corrosive epoxy paint of approved colour and two coats of zinc rich epoxy primer. vi. All the Secondary memebers like plates, lugs, clamps shall be preengineered and fabricated by using CNC/Laer/profile cutting machines and to be from TATA/Jindal/Metpro/Purava make.– Supplying, Providing, Fabricating, Assembling, hoisting, erecting and placing in position MS Built-up section/Tubular Structure. MS built-up section :-Rolled section & plates confirming to IS 2062 Grade Yst 210 ,Tubular Structure:- made from Steel hollow sections, ISI marked from SAIL / RINL / TATA/JINDAL/ Apollo conforming to IS 1161/4923, Grade Yst 210, thickness up to 10mm ) in the profile shape as per drawings with special plate connector, pinion joints, Plates, hollow sections with special plate connectors, pinion joints, plates, hollow sections with cleaning the surface and paint applying as per clients requirement , and including preparation of detailed fabrication and erection drawings of Structural steel work from design drawings issued by Engineer-In-Charge and incorporation of Engineer-In-Charge's comments on same, transportation from fabrication yard, cutting, threading, machining, leads and lifts up to all heights, tools and plants and necessary scaffolding etc. required for all operations involved to make structure of Tensile Membrane shade. The tubular structure system with plate connector etc. is to be provided.
Fabric Part - Providing, fabricating, assembling and erection of composite roofing sheet made of woven high tenacity polyester yarn count of 1100 dtex, coated both sides with PVDF lacquer with the front side provided with suitable primer, roofing sheet would have weight of min 750 gram per square meter. The roofing sheet manufacturer must offer ten years, contractual warranty on the sheet warrantying the usability and the durability of the sheet for the roofing structure provided that the sheet has been designed and installed with an initial safety coefficient of minimum four (4). Make: Ferrari Francedensity 950 g/m2.. Colour: White. The Roofing sheet must also be fire retardant with Euro class BS2, d0 as per EN 13501 norms. The roofing sheet will be manufactured according to the requirements of the European REACH regulations (Registration, Evaluation and Authorization of Chemicals). This work shall be including raw material, patterning, forming will be done on (ixCube latest and licenced version), cutting, welding, fixing and installation with, hardware, mild steel stud patti, galvanized corner plate, etc. including lifts up to all heights, tools and plants, and necessary scaffolding as required for all operations. Patterning should be as per the standard warp direction of the membrane.Pre-stress. Along with steel frames with all fittings and fixtures such as Galvanized MS Membrane /End Plate, Shackles, Rigging Screws, Minimum each welding stroke should be width of minimum of 60mm and minimum in length to be 500mmwith 20 KVA HF welding machine with welding capacity of 30000 sqmm on each welding. Rate Quoted is including necessary Anchor Bolt System, all complete as directed by the Engineer-in-Charge. Note:- Nothing Extra will be made for the Superstructure. Only Foundation and Flooring will be measred seperately and paid.
The Agnecy has to design the structure as per the relavent IS codes like : ii. The structure to be designed with dead load as per IS 875 (Part-1), Imposed loads as per IS 875 (Part2), Wind loads as per IS 875 (Part3) and applicable seismic loads as per IS 13920 for the respective zone. iii. The detailed 3D Model indiacting all the members considered to be submitted to HAL before commencement of work. iv. The Proof Checking of the Design shall be submitted from any of the following institutes/agencies Structural Engineering Research Centre [SERC] Construction Industries Development Council Central Building Research Center Indian Institute of Science, Bangalore. Indian Institute of Technology National Institute of Technology. NABL accrediated Laboratory-Agency Certified firm. v. Primary Structural Members: The primary structural members shall be made with MS tubular sections/SHS made by M/s.TATA/JINDAL having Yiled Strength of 355 Mpa and same shall be coated with anti-corrosive epoxy paint of approved colour and two coats of zinc rich epoxy primer. vi. All the Secondary memebers like plates, lugs, clamps shall be preengineered and fabricated by using CNC/Laer/profile cutting machines and to be from TATA/Jindal/Metpro/Purava make.
vii. MTC for the material used to be submitted and the main structural members will be subjected to ascetain mechanical properties. viii. DPT tests will be performed at site as per the code for weldjoints. ix. The tensile fabric shall be of while colour made up of Excellent UV resistance, dust reppalent finish, having temperature operation between 30 degrees centigrade to 70 degree centigrade with density of min 950 g/sq.m Make: Ferrari, France. Tensile Strength ( wrap/Wept) 420/400N/5cm when tested as per ENISO 1421ASTMED 751-100. MTC and Purchase copy of the material to be submitted by the agency.
111 Supplying and Fixing of roller blinds consisting of control unit idler, head of rail, roller tube, bottom rail operating chain, brackets and clamps / nuts / bolts of approved colour / pattern including necessary supporting hangar holders /screws, etc., all complete as directed by the Engineer-in-Charge. 39.00 Sq m #NAME? 0.00
112 Providing and fixing Sun Control Film/Privacy Matt film of thickness 1mil (25 Microns) reflective type (garware suncontrol or equivalent) along with pasting making good with the windows, partitions, etc., all complete as directed by the Engineer-in-Charge. 14.00 Sq m #NAME? 0.00
113 Providing and fixing Knauf Heradesign Superfine, 1 layer magnesite bonded wood wool acoustic panel, in walls and ceilings 1mm thick fibre, exquisite surface structure, building biology recommended, size [1200 x 600 x 25]mm, having edge detail AK-01 (5mm bevel on all 4 sides), weight 11.30 Kgs/Sq m, fire protection class B-s1,d0 as per EN 13501-1 & Humidity Resistance of 95%. Thickness Tolerance T2 (± 1 mm) according to EN 13168. Wood wool panels to be PEFC certified & should bear the Forest Stewardship Council Seal confirming that the wood used originates from responsibly managed forests, including painting with non reflective coated paint Heradesign wood wool boards as specified, etc., all complete as directed by the Engineer-in-Charge. 864.00 Sq m #NAME? 0.00
Sub-Total of Part 'I' - Civil Works (Excluding GST) #NAME? 0.00
Part 'II' - Electrical & ELV works
1 Supply, Installation, Testing & commissioning of OUTDOOR INCOMING LT PANEL. 1.00 Set #NAME? 0.00
Design, fabrication, supply, installation, testing and commissioning of weatherproof cubicle type Outdoor LT Panel with front lockable door arrangement, suitable to be mounted on the existing brick pedestal/cable duct using M.S channel frame work, with cable entry from bottom with removable gland plates with required knock-outs, panel fabricated out of CRCA sheet steel folded and braced as necessary to provide a rigid support for all components, totally enclosed, dust and vermin proof and degree of protection shall not be less than IP-55, multi-tier cubicle type formation with front hinged lockable doors for the individual feeders/compartments, preparation of surface and treatment by seven tank process, powder coated with approved colour for not less than 50 microns, with front lockable door(Double leaf with pad lock arrangment and tower bolt inside), and all doors and covers shall be fully gasketed using good quality EPDM gasket and/or rubber strips and ensure good lockable, durable door opening & closing mechanism, suitable meshed ventilator louvers with suitable cover,canopy type covering and Aluminium bus bars for three phases and neutral, bus bar insulators, heat shrinkable PVC sleeves etc., with necessary interconnections as specified in Technical specifications for electrical & mechanical works, comprising of following switchgear and accessories complete in all respects and as directed by Engineer-in-charge.
Note:-1) Current density shall not exceed 0.8A/sq.mm for Aluminium bus bars in LT Panel
2)All MCCBs in the LT panels shall be adjustable with thermal settings(80% to 100%), overload and short circuit releases including door interlocking device, front operating handle complete,ON and OFF indication of LED module etc. complete in all respects.
3)The operating height of the Panel shall not exceed 2.1 mtr. from FFL.
i) 1No - 800A, 415V gr. 50KA, 4P ACB
ii) Lot - 800A FP, 415V, short circuit rated 50KA for 1sec, Aluminium bus bars with busbar insulators, heat shrinkable PVC sleeves etc.
iii) Level 2 Surge Protection Device
iv) 1Nos- Multi function meter (MFM/MDM)suitable for 3ph, 4 wire, 240V(L-N), 5A, CL-1,RS 485 Port Digital MFM/MDM of EM6400NG of Schneider or any equivalent make meeting technical specification of above MFM complete in all respect.
v) 1Set - 800/5A current transformers of suitable class and VA burden for metering.
vi) 1No- (0-500V) range 96x96mm flush type voltmeter with RYB selector switch
vii) 1No- 63A 415V gr TP 36KA MPCB of for tapping power for metering and control circuit
viii) 1Set - RYB indicating lamps of LED module with 6A SP MCB.
ix) 1Set - 6A, MCB for the protection of measuring instruments.
i) 1no- 630A, FP, 50kA, Microprocessor based MCCB
ii) 2Nos - 32A 415V gr. 10KA TPN MCB
iii) 2Nos - 63A 415V gr. 10KA TPN MCB
iv) 1No - 32A 415V gr. 10KA DP MCB
2 Supply, Installation, Testing & commiissioning of MAIN LT PANEL 1.00 Set #NAME? 0.00
Design, fabrication, supply, installation, testing and commissioning of cubicle type Indoor LT Panel with front lockable door arrangement, suitable to be mounted on the existing brick pedestal/cable duct using M.S channel(to be included) frame work, with cable entry from bottom/top with removable gland plates with required knock-outs, panel fabricated out of CRCA sheet steel folded and braced as necessary to provide a rigid support for all components, totally enclosed, dust and vermin proof and degree of protection shall not be less than IP-54, multi-tier cubicle type formation with front hinged lockable doors for the individual feeders/compartments, preparation of surface and treatment by seven tank process, powder coated with approved colour for not less than 50 microns and all doors and covers shall be fully gasketed using good quality EPDM gasket and/or rubber strips and ensure good lockable, durable door opening & closing mechanism, suitable meshed ventilator louvers with suitable cover,canopy type covering and Aluminium bus bars for three phases and neutral, bus bar insulators, heat shrinkable PVC sleeves etc., with necessary interconnections as specified in Technical specifications for electrical & mechanical works, comprising of following switchgear and accessories complete in all respects and as directed by Engineer-in-charge.
Note:-1) Current density shall not exceed 0.8A/sq.mm for Aluminium bus bars in LT Panel
2)All MCCBs in the LT panels shall be adjustable with thermal settings(80% to 100%), overload and short circuit releases including door interlocking device, front operating handle complete,ON and OFF indication of LED module etc. complete in all respects.
3)The operating height of the Panel shall not exceed 2.1 mtr. from FFL.
i) 1No- 630A, 415V gr. 36KA 4P MCCB. Microprocessor based including MODBUS TCP/IP communication interface module.
ii) Lot - 630A TP + 315A N, 415V, short circuit rated 36KA for 1sec, Aluminium bus bars with busbar insulators, heat shrinkable PVC sleeves etc.
iii) 1Nos- Multi function meter (MFM/MDM) suitable for 3ph, 4 wire, 240V(L-N), 5A, CL-1, RS 485 Port Digital MFM/MDM of EM6400NG of Schneider or any equivalent make meeting technical specification of above MFM complete in all respect.
iv) 1 Set-630/5A current transformers of suitable class and VA burden for metering.
v) 1no-(0-500V) range digital type Voltmeter with a push button option for selecting the phases.
vi) 1No 32 A 415V gr TP 36KA MPCB of for tapping power for metering and control circuit
vii) 1Set - RYB indicating lamps of LED module with 6A, 230V,10KA, SP MCB.
viii) 1Set- 6A, 230V, 10KA SP MCB for the protection of measuring instruments.
i) 1No - 400A, 415V gr. 36KA, TPN MCCB Microprocessor based
ii) 1No - 125A, 415V gr. 36KA, TPN MCCB Thermal Magnetic based
iii) 3Nos - 63A, 415V gr. 10KA breaking capacity, TPN MCB
iv) 1No - 32A, 415V gr. 10KA breaking capacity, TPN MCB #NAME?
3 Supply, Installation, Testing & commiissioning of HVAC PANEL 1.00 Set #NAME? 0.00
i) 1No - 400A, 415V gr. 36KA, 4P Microprocessor based MCCB
ii) Lot - 400A TP + 200 N, 415V, short circuit rated 36KA for 1sec, Aluminium bus bars with busbar insulators, heat shrinkable PVC sleeves etc.
iii) 1No- Multi function meter (MFM/MDM) suitable for 3ph, 4 wire, 240V(L-N), 5A, CL-1, RS 485 Port Digital MFM/MDM of EM6400NG of Schneider or any equivalent make meeting technical specification of above MFM complete in all respect.
iv) 1Set of - 400/5A current transformers of class 1 and 15VA burden for metering.
v) 1No- (0-500V) range 96x96mm flush type voltmeter with RYB selector switch
vi) 1No 16A 415V gr TP 50KA MPCB of for tapping power for metering and control circuit
vii) 1Set - RYB indicating lamps of LED module with 6A SP MCB.
viii) 1Set- 6A, MCB for the protection of measuring instruments.
i) 1No - 125A, 415V gr. 36KA breaking capacity, TPN MCCB with Thermomagnetic release.
ii) 4Nos - 63A, 415V gr. 10KA breaking capacity, TPN MCB
iii) 1No - 40A, 415V gr. 10KA breaking capacity, TPN MCB
iv) 1No - 80A, 415V gr. 36KA breaking capacity, TPN MCCB with Thermomagnetic release.
v) 1No - 32A, 240V gr. 10KA breaking capacity, TPN MCB
4 Supply, Installation, Testing & commiissioning of OUTDOOR TIMER PANEL 1.00 Set #NAME? 0.00
Design, fabrication, supply, installation, testing and commissioning of weatherproof cubicle type Outdoor LT Panel with front lockable door arrangement, suitable to be mounted on the wall/Pole using M.S channel frame work(to be included), with cable entry from bottom with removable gland plates with required knock-outs, panel fabricated out of CRCA sheet steel folded and braced as necessary to provide a rigid support for all components, totally enclosed, dust and vermin proof and degree of protection shall not be less than IP-55, with front hinged lockable doors for the individual feeders/compartments, preparation of surface and treatment by seven tank process, powder coated with approved colour for not less than 50 microns, with front lockable door(Double leaf with pad lock arrangment and tower bolt inside), and all doors and covers shall be fully gasketed using good quality EPDM gasket and/or rubber strips and ensure good lockable, durable door opening & closing mechanism, suitable meshed ventilator louvers with suitable cover,canopy type covering and with necessary interconnections between incoming and outgoing MCB's, contactor and timer using suitable size flexible copper wires.,(Min 4Sqmm) with necessary interconnections as specified in Technical specifications for electrical & mechanical works, comprising of following switchgear and accessories complete in all respects and as directed by Engineer-in-charge.
a) 1No- Modular digital time switch for street light & Building light control of Legrand Alpha Rex 3 D21 or equivalent approved make with two channel daily cycle unit suitable for daily programming to switch ON & OFF and operate on 230V single phase supply.
b) 1No- 32A 230V gr.10KA 4P MCB with overload and short circuit protection.
c) 1No-25A, Power contactor with AC coil of L&T Cat.No.MNX22 for 230V Single phase supply.
d) 3Nos, 16A, 230V Gr, 10KA SP MCB with overload and shortcircuit protection.
5 Supplying, Installation,Testing and Commissioning of 'Silent Type' Diesel Generating set alongwith Prime Power Rating of 320 kVA, 415 volts at 1500 RPM, 0.8 lagging P.F, suitable for 415V, 3 Phase, 4 Wire, 50 Hz, AC supply system and for 0.85 load factor as per CPCB norms-IV along with acoustic enclosure and outdoor AMF Panel for installation on existing foundation and consisting of the following: 1.00 Set #NAME? 0.00
I). Diesel Engine:
Diesel engine, 4 stroke, turbo charged, water cooled, electric start, developing suitable HP @ 1500 RPM, under NTP conditions with an overload capacity of 10% over loading for one hour after 12 hours of continuous operation suitable for generating set application with following accessories.
a. Flywheel housing and flywheel with suitable starter gear ring and suitable to receive single bearing alternator
b. Electronic governor
c. Radiator with fan
e. Lube oil filter
f. Diesel filter
g. Residential type silencer
h. Battery charging alternator
i. Electric starter motor - 24 V
j. Safety features :
i) Low lube oil pressure
ii) High Water temperature
iii) Low fuel level
iv) Radiator water level
II). Alternator:
Synchronous alternator rated at 320 kVA, 415 V, 3ph, 0.8PF (lag) 50 Hz, 1500 rpm, class H insulation, screen protected drip proof IP 23 Enclosure, brushless, continuous duty, self excited and self regulated with voltage regulation of +/- 1 % of rated voltage from no load to full load
III). Base Frame & Foundation:
Both the engine and alternator includes acoustic enclosure shall be mounted on suitable base frame made of MS channel on existing cement concrete foundation along with vibration isolation arrangement as per the recommendations of manufacture.
IV) Fual Tank: Fuel tank with level indicator & dipstick, fuel inlet and outlets, air vent, drain plug, inlet arrangement for direct filling and set of fuel hoses & accessories including fuel piping between fuel tank and diesel engine with MS class 'C' pipe of suitable dia, complete with valves as required and as per specifications.
V) Exhaust System: Exhaust gas piping of suitable dia welded black MS, B Class pipe conforming to IS:3589 cut to required lengths and installed with necessary bends, supports and clamps, antivibration mountings, insulation of exhaust system with mineral wool/Rockwool, 50 mm thick wiremesh & aluminium cladding etc., of height minimum 3mtrs above the propsoed simulator building and as required as per specifications.
VI) Battery : 12/24 V DC starting system comprising of starter moter, voltage regulator and arrangement for initial excitation complete with suitable nos. of batteries as per manufacturers recommendation as required as per specifications.
VII) Acoustic Enclosure : The acoustic enclosure shall be a sheet metal fabricated enclosure in modular construction for reducing noise level of the DG set and also to act as a weather proof housing. Accoustic enclosure shall be formed of multifold sheet channel & ISMC sections. The enclosure shall be in bolted construction. All doors shall be provided with specially designed hinges and lockable handles. Acoustic enclosure shall be specially designed to meet the stringent latest MoEF/CPCB norms.
6 Supply, fixing to/suspending from existing MS perlins/ ceiling at approx. 10-12 mtr height, including using suitable MS angle frame work with required fixing hardwares etc., as per site requirement, testing & commissioning of industrial type highbay LED lighting fixture of wattage not exceeding 100watts made out of high pressure diecast aluminium housing, diffuser made of high grade toughened glass, integral control gear, eye hook etc., (as per OEM standards). The technical parameters of lighting fixtures are as below: The luminaire should have Lumen efficacy ≥ 110lm/watt and lumen output not less than 11000lumens, PF>0.90 and Colour temprature shall be ≥5700K, THD <10%, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections between driver and lighting fixtures and other standard accessories complete in all respects and as directed by Engineer in-charge. The fitting shall be of Crompton model no: TIP-320-100-57-SL-GL-NSG/ Equivalent model in other approved makes. LED used in the lighting fixtures should be one of the approved make. LM79 certification for luminares & LM80 certificate for LED shall be produced. 11.00 Nos #NAME? 0.00
7 Supply, fixing in flush with the false ceiling including suitable fixing arrangment using Chain links, testing & commissioning of recess mounting type square(2'X2') LED lighting fixture of wattage not exceeding 36watt made out of white powder coated CRCA housing/ aluminium housing, front frame with translucent /polycarbonate cover including control gear. The luminaire should have Lumen efficacy ≥100 lm/watt and lumen output not less than 3600lumens with PF >0.9 and Colour temperature shall be ≥5700K operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections and other standard accessories complete in all respects and as directed by Engineer incharge. LED used in the lighting fixtures should be one of the approved make. LM79 certification for luminaires & LM80 certificate for LED shall be produced.The LED Light fixture shall be of Crompton model no:LCTLRNE-36W-FO-CDL/Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL. 36.00 Nos #NAME? 0.00
8 Supply and fixing in flush with the false ceiling as per site requirement testing & commissioning of round type recess mounted LED downlighter in false ceiling with aluminium die-cast body, finish with drop down diffuser with optimized heat sink for efficiant heat dissipation, wattage not less than 30W LED lighting fixture, lumens efficiency ≥ 100lm/w at luminaire level, effficent heat sink, Colour temprature shall be =>5700K, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V. LM 79 certification for luminare & LM80 certificate for LED shall be produced. including control gear, power factor of control gear shall be >0.90. Crompton model no: CDR-216-30-57-SL-NWH /Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL. 23.00 Nos #NAME? 0.00
9 Supply and fixing on ceiling as per site requirement testing & commissioning of Square type Surface mounted LED downlighter with PDC aluminium housing and high translucent frosted plastic diffucer makes it a robust luminaire, wattage not less than 18W LED lighting fixture, lumens efficiency ≥ 100lm/w at luminaire level, effficent heat sink, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V. 79 certification for luminare & LM80 certificate for LED shall be produced. including control gear, power factor of control gear shall be >0.90. Crompton model no:LCDSPLN-S-18-CDL Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL. 8.00 Nos #NAME? 0.00
10 Supply and fixing in flush with the false ceiling testing & commissioning of round type recess mounted LED downlighter with aluminium die-cast body, finish with premium white powder coating, wattage not less than 12W LED lighting fixture, lumens efficiency ≥ 100lm/w at luminaire level, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V. LM79 certification for luminare & LM80 certificate for LED shall be produced. including control gear, power factor of control gear shall be >0.90. of Crompton model no: LSCSM-12W-CDL /Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL. 30.00 Nos #NAME? 0.00
11 Supply and fixing on existing wall / ceiling, testing & commissioning of surface mounting, Batten type 1X18W/20W T8 LED Tube light (four feet) Luminaries with minimum lumens output Efficacy of minimum100 lm/W., comprising of white powder coated CRCA sheet steel housing, operating on single phase 230V 50Hz AC supply, built-in electronic driver, LM 79 certification for luminaire. Other standard accessories including necessary inter-connections and supply of 1 No of 18/20W T8 LED Tube, complete in all respects and as directed by engineer-in-chage. Make & model: The LED tube & batten shall be of CROMPTON-IGP161LT8-16-1XT8+LT8-20-865/Equivalent model of approved make luminaries which meets the above technical specification. complete in all respect and as directed by Engineer-in-charge. 30.00 Nos #NAME? 0.00
12 Supply & fixing on the building at a height of 5-8mtr approx. including supply and fixing GI pipe bracket made out of 40mm dia class B GI pipe of 1.5Mtrs long bent to shape with necessary fixing hardwares etc., to fix on building and testing & commissioning of building light LED light fixture of wattage not exceeding 70watts and lumens output not less than 7000 lumens with necessary interconnections consisting of pressure die cast aluminum housing, optical cover made out of heat resistance toughened clear glass / polycarbonate with IP66, luminous efficiency ≥100lm/w at luminaries level, operating on single phase 230V 50Hz AC supply, efficient heat sink, colour temperature shall be 5600K+400K, suitable optics for maximizing the spread complete in all respects and as directed by engineer-in-change. The luminaries shall have specific lens for optical dispersion including control gear and power factor of control gear shall be >0.95. LM 79 certification for luminaries & LM80 certificate for LED shall be produced. Any approved make fitting meeting the above technical specification has to be supplied.The LED Light fixture shall be of Crompton model no:CRP-409-70-57-SL-GL-NSG /Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL. 19.00 Nos #NAME? 0.00
13 Supply, installation, testing & commissioning of 300mm dia 900 rpm heavy duty exhaust fan of any approved make with louvers, connecting cord with 6A, 3 pin plug top and with all necessary accessories, including making wall openings and replastering to smooth finish with matching paint etc., complete in all respects and as directed by Engineer-in-charge. 10.00 Nos #NAME? 0.00
14 Distribution Boards, #NAME?
Supply, fixing, testing & commissioning of the following factory built powder coated Double door MCB/MCCB DB of any approved make fabricated out of M.S. sheet steel enclosure & necessary cutouts for operating the MCB knobs & comprising of 200 amps tinned copper busbars & earthing bus with tapped holes including internal wiring with stranded copper PVC wires or suitable size copper strips etc. & fixing the DB in flush with wall/ on wall as per site requirement with necessary M.S. angle supports, chipping the wall and replastering to smooth finish etc., wherever required as per site condition, complete in all respects, as directed by Engineer-in-charge and comprising the following as detailed below: #NAME?
a) 8 way (4 + 24), Double door VTPN MCB DB 1.00 No #NAME? 0.00
b) 8 way (4 + 24), Horizontal Double door MCB DB 2.00 Nos #NAME? 0.00
c) 6 way (4 + 18), Horizontal Double door MCB DB 1.00 No #NAME? 0.00
d) 4 way (4 + 12), Double door VTPN MCCB DB 3.00 Nos #NAME? 0.00
e) 4 way (4 + 12), Horizontal Double door MCB DB 1.00 No #NAME? 0.00
f) 8 way , double door SPN MCB DB 1.00 No #NAME? 0.00
14.1 MCCB and MCBs
Supply, fixing, testing & commisisoning of following rating MCCB/MCB in the existing Distribution board/powder coated enclosure as directed by Engineer-in-Charge.
a) 125 A, 415V 36KA, FP MCCB with thermomagnetic releases. 3.00 Nos #NAME? 0.00
b) 63 amps. ratings, 4P MCB, "C" curve, 10 KA breaking capacity. 4.00 Nos #NAME? 0.00
c) 32 amps. ratings, TPN MCB, "C" curve, 10 KA breaking capacity. 6.00 Nos #NAME? 0.00
d) 63 amps. ratings, TP MCB, "C" curve, 10 KA breaking capacity. 5.00 Nos #NAME? 0.00
e) 6A to 32A TP MCB 10kA , C Curve 16.00 Nos #NAME? 0.00
f) 6A to 32A DP MCB 10kA , C Curve 1.00 No #NAME? 0.00
g) 6-32 amps. ratings , SP MCB, "C" curve, 10 KA breaking capacity. 110.00 Nos #NAME? 0.00
g) MS Power Coated Enclosure with cover for fixing Four/single pole(including dummies) MCB fabricated of minimum 16 gauge sheet steel to be fixed inflush with wall/surface mounted as per site requirement. 10.00 Nos #NAME? 0.00
15 Supply, laying, testing & commissioning of following size LT armoured/unarmoured power cables.
Supply & laying in the already excavated cable trench/cable tray/fixing on wall/duct wall with necessary M.S clamps / encasing in pipes etc., testing & commissioning of following size XLPE insulated Aluminium (Al) /Copper (cu) conductor 1.1 KV grade confirming to IS: 7098 ( part-I)/1998 with upto date amendment earthed Armoured (Arm)/un Armoured (un Arm) U.G cables and as per technical specification including stacking at site, proper storage complete etc. as required. (Note:- Excavation, sand & Brick Protection, concrete cutting, reconcreting, casing pipes will be measured separately.)
a) 3.5 CX 300 Sqmm Aluminium armoured conductor. 210.00 Mtrs #NAME? 0.00
b) 3.5 CX 185 Sqmm Aluminium armoured conductor. 60.00 Mtrs #NAME? 0.00
c) 3.5 CX 95 Sqmm Aluminium armoured conductor. 20.00 Mtrs #NAME? 0.00
d) 4CX 50 Sqmm Copper Unarmoured conductor. 35.00 Mtrs #NAME? 0.00
e) 3.5 CX 35 Sqmm Aluminium armoured conductor. 30.00 Mtrs #NAME? 0.00
f) 3.5 CX 25 Sqmm Aluminium armoured conductor. 150.00 Mtrs #NAME? 0.00
g) 4 CX 16 Sqmm Aluminium armoured conductor. 150.00 Mtrs #NAME? 0.00
h) 4 CX 10 Sqmm Aluminium armoured conductor. 20.00 Mtrs #NAME? 0.00
i) 3CX 10 Sqmm Aluminium armoured conductor. 20.00 Mtrs #NAME? 0.00
j) 4C X 6 Sqmm Copper armoured conductor LT Power Cable 50.00 Mtrs #NAME? 0.00
k) 4C X 16 Sqmm Copper armoured conductor LT Power Cable 100.00 Mtrs #NAME? 0.00
l) 3CX 4 Sqmm Copper Armoured conductor. 250.00 Mtrs #NAME? 0.00
m) Supply & drawing of 3CX 1.5 Sqmm Copper Un armoured Control cable including necessary copper lugs & PVC glands as required for termination. 150.00 Mtrs #NAME? 0.00
16 Supply and connecting indoor type cable end joints for the following size 1.1 KV gr., PVC insulated and PVC sheathed / XLPE Aluminium(Al)/ Copper(Cu) conductor armoured (Arm)/un armoured(un Arm) LT UG cables by employing necessary glands, terminals(Al/Cu), bolts & nuts etc., complete in all respects and as detailed below:
a) 3.5 X 300 sq. mm Al arm cable 10.00 Nos #NAME? 0.00
b) 3.5 X 185 sq. mm Al arm cable 4.00 Nos #NAME? 0.00
c) 3.5X 95 sq. mm Al arm cable 2.00 Nos #NAME? 0.00
d) 4C X 50 Sqmm Copper Unarmoured LT Cable End Joint 4.00 Nos #NAME? 0.00
e) 3.5 X 35 sq. mm Al arm cable 2.00 Nos #NAME? 0.00
f) 3.5 X 25 sq. mm Al arm cable 14.00 Nos #NAME? 0.00
g) 4 X 16 sq. mm Al arm cable 12.00 Nos #NAME? 0.00
h) 4 X 10 sq. mm Al arm cable 2.00 Nos #NAME? 0.00
i) 3 X 10 sq. mm Al arm cable 2.00 Nos #NAME? 0.00
j) 4C X 10/16 Sqmm Copper Armoured LT Cable End Joint 10.00 Nos #NAME? 0.00
k) 4C X 6 Sqmm Copper Armoured LT Cable End Joint 8.00 Nos #NAME? 0.00
l) 3C X 4 Sqmm Copper Armoured LT Cable End Joint 22.00 Nos #NAME? 0.00
17 Wiring for light point / fan point / exhaust fan point/call bell point from nearest switch box with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, fan regulator, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (as per detailed CPWD specifications for Group C wiring) #NAME?
a) Wiring to single light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects. 18.00 Pts #NAME? 0.00
b) Wiring to two light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects. 42.00 Pts #NAME? 0.00
c) Wiring to exhaust/wall mounting fan point using 6A, 250V gr. flush type modular SP switch housed along with other lighting switches/separate switch box if required and 3pin 6A, 250V gr. modular type socket housed near the exhaust fan complete in all respects. 10.00 Pts #NAME? 0.00
d) Wiring for twin control light point(for two lights) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 5.00 Pts #NAME? 0.00
e) Supplying and fixing following suitable size GI Box with modular plate and cover on front on surface or in recess, including providing and fixing 6 pin 5/6A & 15/16A modular socket outlet and 15/16 A modular switch, connections etc., as required. 5.00 Nos #NAME? 0.00
f) Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2sets of 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required 7.00 Nos #NAME? 0.00
g) Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3sets of 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required 13.00 Nos #NAME? 0.00
h) Supplying and fixing suitable size GI Box with modular plate and cover on front on surface or in recess, including providing and fixing 6 pin 5/6A & 15/16A modular socket outlet and 15/16 A modular switch, connections etc., as required. 44.00 Nos #NAME? 0.00
i) Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 19.00 Nos #NAME? 0.00
18 Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required #NAME?
a) 3 x 2.5 sq. mm (For lighting ckt from DB to Switch box, For 6A power Points) 1000.00 Mtrs #NAME? 0.00
b) 3 x 4 sq. mm(For 16A power points) 900.00 Mtrs #NAME? 0.00
19 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
a) 20MM PVC Conduit 250.00 Mtrs #NAME? 0.00
b) 25MM PVC Conduit 550.00 Mtrs #NAME? 0.00
c) 32MM PVC Conduit 20.00 Mtrs #NAME? 0.00
20 Supplying and fixing of Hot dip galvanised Perforated type cable tray of following sizes, steel: As per IS:2062 / 1079, Galvanising : As per IS: 2629 / 4759 including all accessories like base slotted angle, horizontal elbow, horizontal tee, horizontal cross, horizontal reducer, vertical elbow up, inside, vertical elbow down, outside, coupler plate, fasteners etc., and duly suspended from the ceiling/fixing to the wall/RCC beam/iron structures upto a height of 3/4mtrs from FFL., complete in all respects and as directed by Engineer in charge
a) Supplying and fixing of 100 x 50 x 1.6mm size Hot dip galvanised Perforated type cable tray 50.00 Mtrs #NAME? 0.00
b) Supplying and fixing of 150 x 50 x 1.6mm size Hot dip galvanised Perforated type cable tray 50.00 Mtrs #NAME? 0.00
c) Supplying and fixing of 300 x 50 x 1.6mm size Hot dip galvanised Perforated type cable tray 100.00 Mtrs #NAME? 0.00
21 Supply, fixing on existing foundation, installation, testing and commissioning of 7 meter Octagonal pole of 3mm thickness with 70mm top diameter and 130mm bottom diameter with single arm bracket of 1500mm. The Base plate size should be of 200X200 mm with 12mm thickness. Material of pole sections are hot rolled MS Plate of BS EN 10025 : 2019, Grade S355, IS 2062 : 2011 Grade E350 and for Base plate and foundation bolt as per IS 2062 : 2011, Grade E250 A. Metal protection with hot dip galvanized as per is 4759 : 1996 / IS 2629 : 1985. The foundation bolt size should be of M20X600. Make:-Bajaj/ Philips/ Wipro/ Lighting Technologies/ Havells/ crompton Greaves. Note:1-Scope of work includes supply and fixing of Base plate and Foundation J bolts and nuts. 2.Civil works for the Foundation will be measured seperately at BOQ Sl.No.32. 10.00 Nos #NAME? 0.00
22 Supply and fixing of weather proof cable junction box with terminals of size 130 X 180 X 77 mm SMC BOX (4 - 10 sqmm connector) in Hensel/Legrand/ Schneider/ Hagar make. The Box shall be mounted at suitable height on the pole/wall/column using suitable size MS angle frame work with painting as per EIC, with cable entry knock-outs, including rigid support for all components, Din channel, required fasteners totally enclosed, dust and vermin proof and degree of protection shall not be less than IP-65 complete in all respects and as directed by Engineer-in-charge. 19.00 Nos #NAME? 0.00
a) Supply & providing earth stations using 600x600x3.15mm thick copper plate electrode complete at 2.5 mtr. below the ground level with 20mm dia class B G.I pipe for watering, G.I funnel etc. & Cement concrete base of minimum size 750x750x100mm thick shall be provided using 1:2:6 CC after necessary excavation, refilling of soil, consolidating, ramming, leveling of soil etc. and providing cement concrete chamber of inside dimension 300x300x300mm with a wall thickness of 120mm using 1:2:6 CC above the base concrete including providing 50mm thick RCC cover including required salt & charcoal, 2runs of 50x6 mm(300mm) copper strip from plate electrode upto top of the chamber etc. as per technical specification enclosed with the tender documents & as per IS 3043 complete in all respects[For existing Transformer neutral earthing]. 8.00 Set #NAME? 0.00
b) Supply & providing GI earth stations using 600 x 600x 6.3 mm thick G.I plate electrode at 2.5 mtr. below the ground level with 20mm dia class B G.I pipe for watering, G.I funnel etc. & Cement concrete base of minimum size 750x750x100mm thick shall be provided using 1:2:6 CC after necessary excavation, refilling of soil, consolidating, ramming, leveling of soil etc. and providing cement concrete chamber of inside dimension 300x300x300mm with a wall thickness of 120mm using 1:2:6 CC above the base concrete including providing 50mm thick RCC cover including required salt & charcoal, 2 runs of 50x6 mm G.I strip from plate electrode upto top of the chamber etc. as per technical specification enclosed with the tender & as per IS 3043 complete in all respects. 10.00 Set #NAME? 0.00
c) Supply, fixing & connecting the 50X6mm size G.I strip on wall / clamping to the existing duct wall / fixing on steel structures/ laying 2 ft. below the ground level with necessary excavation, concrete cutting & re-concreting, refilling, consolidation & levelling of soil after laying for interconnection between the earth pits and the LT panels earthing as directed by Engineer-in-charge. Note:- Excavation, concrete cutting & re concreting will be measured separately. 200.00 Mtrs #NAME? 0.00
d) Supply, fixing & connecting the 40X6mm size Copper strip on wall / clamping to the existing duct wall / laying in cable tray/ laying 2 ft. below the ground. level with necessary excavation, concretecutting & re-concreting, refilling, consolidation & levelling of soil after laying for interconnection between the earth pits and for earthing purpose as directed by Engineer-in charge. Note:- Excavation, concrete..cutting & re-concreting will be measured separately. 150.00 Mtrs #NAME? 0.00
e) Supplying & laying 25 mm X 5 mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50mm) 100.00 Mtrs #NAME? 0.00
f) Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. 500.00 Mtrs #NAME? 0.00
24 Supply & fixing on the top of the building 3 pronged lightning conductor finials fixed on 20 mm dia copper tube 2 mtrs. long with Copper plate base 300x200x5mm thick. Base & fixing arrangements for the down conductors/GI strip complete in all respects and as directed by the Engineer-in-charge. Note: Base to be installed on porcelian insulators. 1.00 Set #NAME? 0.00
25 Supply, fixing & connecting the 25x3mm(75 sqmm) size G.I strip on parapet wall / clamping to the existing duct wall / fixing on cable tray/ clamping on wall with suitable size epoxy insulators at a spacing of minimum 0.8mtr (between 2 insulators) including fixing hardware complete in all respects and as directed by the Engineer-in-charge. 250.00 Mtrs #NAME? 0.00
26 Data Items #NAME?
a) Supply and fixing of wall Mountable 15U Network Rack with 2 nos of 6/16A Power Distribution unit and Dual cooling Fan, earthing cable, cable managers, hardware etc. with all standard Accessories, complete in all respects as per technical specification and as directed by Engineer-in-charge. Approved Make:APC/VALRACK/NETRACK/RITTAL 1.00 No #NAME? 0.00
b) Supply and fixing of fully Loaded, 48 Port CAT6 UTP Jack Panel, including termination of CAT 6 cables in Jack panel labelling complete in all respects as per technical specification and as directed by Engineer-in-charge. Approved Make: COMMSCOPE TYCO/ PANDUIT/ MOLEX 1.00 No #NAME? 0.00
c) Supply and fixing of fully Loaded, 24 Port CAT6 UTP Jack Panel, including termination of CAT 6 cables in Jack panel, labelling complete in all respects as per technical specification and as directed by Engineer-in-charge. Approved Make: COMMSCOPE TYCO/ PANDUIT/ MOLEX 2.00 Nos #NAME? 0.00
d) Supply, Fixing in flush with wall/on Aluminium partition as per site condition, testing & Commissioning of 2 nos of RJ-45 modular type sockets for Data points including supply of suitable size modular MS/PVC surface mounting box with base plates, glossy finish front covers, labelling etc., with necessary interconnections and chipping the wall, replastering to smooth finish etc., wherever required complete as directed by Engineer-in-charge. 25.00 Nos #NAME? 0.00
e) Supply, Fixing in flush with wall/on Aluminium partition as per site condition, testing & Commissioning of 1 nos of RJ-45 modular type sockets for telephone point including supply of suitable size modular MS/PVC surface mounting box with base plates, glossy finish front covers, labelling etc., with necessary interconnections and chipping the wall, replastering to smooth finish etc., wherever required complete as directed by Engineer-in-charge. (For telephone point) 10.00 Nos #NAME? 0.00
f) Supply ,drawing and testing of Cat 6 UTP 4-Pair cable in the existing PVC conduits / wall / above false ceiling, including necessary interconnections for LAN & Internet point as directed by Engineer-in-charge. 1500.00 Mtrs #NAME? 0.00
27 AUDIO & Video System for Classrooms
a Supply & Installation, testing and commissioning of projector with Brightness 4500 Lumens, WUXGA, Contrast 300000:1, 1.3x Optical Zoom/ Light Hrs 20K/30K (Dynamic Mode)/HDMI 1.4 X 1, HDMI 2.0 X 1, VGA X 2, Composite S-Video, RS-232, USB Type-A x1, 1.07 BN color, Keystone (+/- 30% Vertical), 10W Speaker including necessary conduting and cabling as per site requirement and as directed by Engineer-in-Charge. Make: People link, Infocus,Optoma,Panasonic 2.00 Nos #NAME? 0.00
b Supply & Installation, testing and commissioning of AIO DSP 100W, DSP, AMP, Speaker(min 35Watt) – 2 nos, Hand Mic(1no) & Collar Mic(1no), Surface Mount Technology (SMT ) Circuit High efficiency of ~90% Rack Mountable Chassis DSP with Inbuilt amplifier DSP with wireless microphone system including necessary conduting and speaker cabling required as per site requirement and as directed by Engineer-in-Charge. Make: Peoplelink, Shure, Yamaha. 2.00 Lot #NAME? 0.00
c Supply & Installation, testing and commissioning of Motorised Screen 120” and above 16:10 ratio including necessary conduting and cabling as per site requirement and as directed by Engineer-in-Charge. Make: Logic, Clear view, Grand logic. 2.00 Nos #NAME? 0.00
d Supply & Installation, testing and commissioning of minimum 6U rack for installing the AIO DSP and accessories including 1no PDU with 5nos of 6/16A sockets, 1 no fan, cable manager, hardware, HDMI face plate & HDMI cabling for providing projector input from the PC/Laptop, accessories. Make of rack: APC/VALRACK/NETRACK/RITTAL Make of HDMI cables: Belden/MX/extron/Kramer 2.00 Lot #NAME? 0.00
28 Supply & Installation of 40KVA IGBT Based On-Line systems with 3Phase Input & 3Phase Output, with Isolation Transformer, Surge protection device, 384VDC and battery bank comprising of 12V-100AH X 32 Nos of SMF Battery including suitable Battery stand and interconnection between bateries, necessary copper cable connectivity from battery bank to UPS. The efficency of UPS sytem shall be more than 90% at 0.9 PF. (Note: Tenderer has to read detailed specification, given under Technical specification and quote accordingly) 1.00 Set #NAME? 0.00
29 INTELLIGENT FIRE ALARM SYSTEM
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history login the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.
a) Two Loop Panel. 1.00 No #NAME? 0.00
b) Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. 56.00 Nos #NAME? 0.00
c) Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or seperate) of suitable range required for the dome/simulator are complete with emitter and receiver including connections with remote test features etc., complete as required. 1.00 No #NAME? 0.00
d) Supplying, installation, testing & commissioning of intelligent addressable duct detector including suitable Photo detector complete with base as required. 1.00 No #NAME? 0.00
e) Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, PVC/metallic cover complete with all connections etc as required. 30.00 Nos #NAME? 0.00
f) Supplying, installation, testing & commissioning of fault isolator complete with base as required. 5.00 Nos #NAME? 0.00
g) Supplying, installation, testing & commissioning of addressable manual call point complete as required 6.00 Nos #NAME? 0.00
h) Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. 6.00 Nos #NAME? 0.00
i) Supplying, installation, testing & commissioning of addressable fire control module complete as required. 1.00 No #NAME? 0.00
j) Supply, laying and fixing directly to the ceiling/on wall / above false ceiling etc, testing & commissioning of 2 Core X1.5 sqmm copper XLPE insulated FRLS with ISI mark armoured RED colour LT cable along with required accessories, terminations glands, as directed by EIC to complete the installation as per the technical specification. 400.00 Mtrs #NAME? 0.00
30 Supply and providing 75mm thick sand around the LT 1.1 KV/HT grade armoured UG cables including providing the well burnt brick covering on sides and top of the cable as per technical specifications for 2R of LT cables. 40.00 Mtrs #NAME? 0.00
Civil Items #NAME?
31 Excavation in all types of soil for Cable trench including refilling, consolidating of soil after laying the cable including ramming and levelling to smooth finish as per the Technical specifications enclosed and as directed by the Engineer-in-charge. 65.00 Cu.Mtrs #NAME? 0.00
32 Supply & providing pedestal foundation of size 500X500X1200MM for 7mtr height street light poles comprising of following: 10.00 Nos #NAME? 0.00
a) Providing 1:2:4 cement concrete using 20mm graded aggregate including curing etc., and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level.
b) Steel reinforcement for R.C.C work including straightning, cutting, bending placing in position and binding all complete avove plinth level, Thermo-Mechanically Treated bars of grade Fe-500D or more.(TMT Bars-8mm, 10mm, 12mm)
c) Providing 1:4:8 cement concrete using 40mm graded aggregate including curing etc., of size 600x600x100mm.
33 Design, Fabrication, Supply and fixing/grouting in wall/ceiling of suitable size MS angle iron supports/ flat/ brackets for cable tray supports, duct supports, Piping supports and etc., as per site requirement and painting the same with two coats of synthetic enamel paint over a coat of zinc chromite primer complete in all respects and as directed by EIC/OIC. 1000.00 Kgs #NAME? 0.00
Sub-Total of Part 'II' - Electrical & ELV Works (Excluding GST) #NAME? 0.00
Part 'III' - Airconditioning Work
Air cooled inverter chilled water units/heat pump
1 Supply, installation,levelling,testing & commissioning of following Air-Cooled inverter chilled water Units/heat pump complete with Inverter Scroll compressors, Evaporator, air-cooled condenser, Control panel etc. The chiller will be charged with R410A Refrigerant or any other suitable eco friendly referigerant as per OEM. The drive motor suitable for 415V +/-15%, 3 phase, 50 cycles/sec. All exposed power wiring shall be routed through liquid-tight, UV-stabilized, non-metallic conduit. Each refrigerant circuit shall include: a discharge service ball type isolation valve, dual high side pressure relief valves, liquid line shutoff valve with charging port, dual low side pressure relief valves, solenoid valve, sight glass with moisture indicator, electronic expansion valves, and flexible, closed-cell foam insulated suction line and suction pressure transducer, refrigerant receiver, discharge liquid separator. Air-Cooled scroll chiller should have inbuilt centrifugal pump and pressurization system. The Indicated Flow rate and Head is calculated based on initial design details however contractor to select pump to match with chiller flow rate and pressure drop, actual system head based on the finalized equipment / pipe lengths. If the OEM does not have inbuilt pump, then separate suitable pump along with accessories such as valves, strainer, temperature, pressure gauges and other accessories required if any as per site condition to be considered for catering flow rate and head. The chiller evaporator shall be Brazed Plate Heat Exchanger (BPHE) type /shell and tube type.
The heat exchange surface is configured so as to maximize the exchange coefficient with minimal load losses. Input and output connections shall be fitted with air bleeder and draining valves. The covering in closed-cell neoprene sponge to prevents the formation of condensation and reduces thermal wastage. Air-cooled Condenser with integrated fin and tube coils with inner grooved copper tubes and expanded into aluminium fins complete with sub cooler and top discharge air circulators using EC(Electronically Commutated) axial flow fans or as per OEM with Brushless commutation and minimum self-heating with IP 55 protection standrad for outdoor duty,permanently-lubricated ball bearings, U shaped condenser coil guard etc., and Standard Hydrophilic Coating on the Condenser for better protection. Closed-cell, flexible, UV protected, thermal insulation for preformed flexible elastomeric cellular thermal insulation in sheet and tubular form. Thickness: Standard 38mm or as per OEM.The compressor motor shall be with inverter driven and with protection for under voltage, over load, earth fault and single phasing, Integrated thermal protection, Speed control with Inverter start-up, Power factor correction, condensers, Oil valve and by-pass line, Anti-vibration supports etc. It should have Differential pressure switch, chilled water temperature sensors, water flow sensors / flow switch etc. Number of EC or energy effcicient fan as per OEM should be 3 Nos or as per OEM standard. Motor overheat protection will be provided to ensure the motor reliability. Micro-processor based controls with
Touch screen display in English for all operating parameters such as supply voltage, frequency, load current, chilled water inlet, chilled water outlet, temperature parameters, operating pressures, input power etc., as per tender tech specification. The processor must be fitted with card for external communication for parameters in open protocol such as Bacnet. Hardware( viz IP router). Powder coating of all components. Victaulic coupling shall be part of the Chiller Package. Noise level of the chiller should not be above 65 db(A) at 1 m distance.
1.1 Nominal cooling capacity for each chiller : 17.6 TR to 18.5 TR for Simulator Room. (The combined capacity of 2nos working chiller at ambient of 40 degree celsius and outlet of -2 degree celsius of brine/glycol solution should not derate less than 24.2 TR.) Nominal water flow : 48.0 USGPM or as per OEM standard calculation in order to achive output of -2 degree celsius of chilled water . Spring type Vibration Isolators as per manufacturer standard supplied from the factory Actual cooling capacity at designed conditions indicated below : Ambient Temperature : 104 degree farenheight Chilled water leaving temperature : -2 °C Chilled water entering temperature : 3 °C Fouling Factor (FPS) : 0.018 hr-sft- deg.F/Btu or as per OEM standard System minimum COP at 100 % load : As per OEM standard System minimum COP at IPLV : As per OEM standard (Note:1: The chiller can be set at any temperatute of outlet chilled water from -2 to 7 degree celsius.Concentration of ethyelene glycol /brine should be as per OEM in order to achieve -2 degree celsius ouput of chilled water. 3.00 Nos #NAME? 0.00
2.The 3nos chiller should working in master slave mode. 2 nos of chiller will start for achieving set conditions of temperature and humidity at peak load .However, if in case 2nos of chillers not meeting the load requirement, the third chiller shall operate and achieve the desired tempearure and humidity in the simulator room.
3.The costing is inclusive of Makeup water tank with necessary piping system from tank to chilled water pipe line header with valve packages for the the CHW circuits. )
Make of chiller-: YORK/ TRANE/DIAKIN/ANY OTHER HAL APPROVED MAKE WHICH QUALIFIESES THE SPECIFICATION
1.2 Aircooled chillers for other spaces except simulator : Spring type Vibration Isolators as per manufacturer standard supplied from the factory Actual cooling capacity at designed conditions indicated below : Ambient Temperature : 104 degree farenheight Chilled water leaving temperature : 7 °C Chilled water entering temperature : 12 °C Fouling Factor (FPS) : 0.018 hr-sft- deg.F/Btu or as per OEM standard System minimum COP at 100 % load : As per OEM standard System minimum COP at IPLV : As per OEM (Note : The costing is inclusive of Makeup water tank with necessary piping system from tank to chilled water pipe line header with valve packages for the both the CHW circuit.)
a Nominal cooling capacity : 12.5 TR For Comfort Application Nominal water flow :32 USGPM 1.00 No #NAME? 0.00
b Nominal cooling capacity : 18.5 TR For Comfort Application , Nominal water flow :47 USGPM 1.00 No #NAME? 0.00
Make of chiller-: YORK/ TRANE/DIAKIN/VOLTAS/ANY OTHER HAL APPROVED MAKE WHICH QUALIFIES THE SPECIFICATION
2 Design, supply, installation, testing and commissioning of AHU NOT LESS THAN 26 TR , NOT LESS THAN 7700 CFM, MINIMUM 65 ESP OR AS PER SITE CONDITION double Skin Horizontal Type Floor Mounted Air Handling Unit in 45mm Panel in Thermal Break Construction with:-Outer Skin :0.8 mm pre coated GI Inner Skin : 0.8 mm pain GI Frame work : Extruded hollow aluminium profile Pannel Thickness : 45+ 2 mm thick; CFC free PUF injected (Density: 42 kg/ Cum) Drain Pan : Single skin 18G SS 304 with 13 mm thick nitrile insulation Coils: Chilled water Coil Casing/ Blank offs : GI Material Of Tube : Copper (Plain) Thickness & Material of fins : Plain Aluminum and thIckness as per OEM No. of Fins per inch (FPI) : Fin Spaced at about 472 Fins per Meter (11 - 12 FPI) or as suitable for brine application(-2degree celsius) Mixing box with FA/RA control dampers in aluminium construction. 10 Microns Pre filters (G4), 3 Micron Fine-Filters (F7), Coil section with not less than 6 rows deep CHW type cooling or more suitable to achieve dew point of 2.2 degree centigrade.Plug fan with suitable VFD, IE3 motor,view window, weather proof light, door limit switch, drive set and outlet damper in aluminium construction. VFD to be installed in AHU control panel.The defrost application if required needs to be included in the price. 1.00 No #NAME? 0.00
Make of AHU-: zeco/ VTS/DURGA MANUFCATURING CO. / ANY OTHER HAL APPROVED MAKE WHICH QUALIFIESES THE SPECIFICATION
3 Supply, installation, testing and commissioning of following capacities chilled water cassette unit with high efficiency fan, evaporative copper coils, aluminium fins and cordless remote controller.
a) Not less than 3.0 TR 1.00 No #NAME? 0.00
b) Not less than 2.0 TR 11.00 Nos #NAME? 0.00
MAKE-: YORK/ TRANE/DIAKIN /ANY OTHER HAL APPROVED MAKE WHICH QUALIFIESES THE SPECIFICATION
4 Supply and Installation of Valve Station for Indoor units, Ball valve, Ball valve with strainer & 3 way valve including all hardwares and accessories.All valve shall be of dia 25 mm 12.00 Nos #NAME? 0.00
5 Supply and installation of 80 mm dia 3 way valve with insulationincluding all hardwares and accessories. 1.00 No #NAME? 0.00
6 Supply and installation of 80 mm dia Butterfly valves for Header with insulation including all hardwares and accessories. 6.00 Nos #NAME? 0.00
7 Supply, installation, testing and commissioning of 65 mm dia Brass Balancing Valves, screwed type including all hardwares and accessories. 3.00 Nos #NAME? 0.00
8 Supply, installation, testing and commissioning of 65 mm Brass NRV valves, screwed type including all hardwares and accessories. 3.00 Nos #NAME? 0.00
9 Supply and fixing of the 65mm dia 'Y' strainer for chilled water piping including insulation complete as per technical specification. 5.00 Nos #NAME? 0.00
10 Supply, installation, testing and commissioning of 65mm dia Rubber Bellows. 10.00 Nos #NAME? 0.00
11 Supply, installation, testing and commissioning of Auto air vents of 25mm dia. 10.00 Nos #NAME? 0.00
12 Supply and installation of S.S. Pressure Gauge with 3/8" BSP Connection, Bottom Entry Range 0-10kg/cm2 -150 mm dia with SS Syphon Size 3/8" and RB Ball Valve Size 3/8" 12.00 Nos #NAME? 0.00
13 Supply and installation of S.S. Temperature Gauge Range 0-50 Deg C With 4" Stem Length 150 mm dia and SS thermowell. 12.00 Nos #NAME? 0.00
14 Supply and installation of Thermostat.( Note : Out of 2nos of thermostat, one thermostat to be fixed in return air duct near AHU and other one in return chilled water main pipe line for Chillers for brine application.) 2.00 Nos #NAME? 0.00
15 Supply, installation, testing and commissioning of UPVC pipes with all necessary fittings like elbows, tees and reducers, mating flanges, nipples for mounting sensor. The quoted price shall inclusive of necessary angles, supports, hangers, sleeves, and saddles for Chilled water pipes,clamps, bolts, nuts, paints and all accessories as per specification to complete the installation with 19mm thick nitrile rubber tubular insulation. MAKE-: Supreme/ Astral/Finolex / other HAL approved make.
a) Supply, installation, testing and commissioning of UPVC pipes 80mm dia with 19 mm thick insulation 6.00 Rmts #NAME? 0.00
b) Supply, installation, testing and commissioning of UPVC pipes 65 mm dia with 19 mm thick insulation 40.00 Rmts #NAME? 0.00
c) Supply, installation, testing and commissioning of UPVC pipes 50 mm dia with 19 mm thick insulation 16.00 Rmts #NAME? 0.00
d) Supply, installation, testing and commissioning of UPVC pipes 40 mm dia with 19 mm thick insulation 10.00 Rmts #NAME? 0.00
e) Supply, installation, testing and commissioning of UPVC pipes 32 mm dia with 19 mm thick insulation 60.00 Rmts #NAME? 0.00
f) Supply, installation, testing and commissioning of UPVC pipes 25 mm dia with 19 mm thick insulation 110.00 Rmts #NAME? 0.00
16 PVC Drain piping from the indoor units till the nearest drain points with necessary bends,Elbows and 6mm thick nitrile rubber tubular insulation.
a) Supply and Installation PVC Drain piping 25 mm dia pipes. 80.00 Rmts #NAME? 0.00
b) Supply and Installation PVC Drain piping 32 mm dia pipes. 20.00 Rmts #NAME? 0.00
17 DUCTING : Design, supply, installation & testing and commissioning of factory fabricated GSS ducting as per IS 655 with zinc coating of minimum class VIII ie. 120GSM total on both sides as per IS 277 complete with suspenders of MS rods / wall MS brackets, cradles, angle iron supports, bolts and nuts, gaskets, stiffeners, canvas connections, fixing of anchor grip bolts, zinc chromate painted angle iron flanges/Transverse duct connectors, chipping and plastering of opening made for duct supports, outside air intakes complete with bird screen, damper,collar, bowl, rough filters etc., complete as per specifications and as directed by Engineer-in-charge.: Note:1. Scope includes cutting and closing of wall/wall GI sheet with suitable sealant. 2. Duct support shall be measured separately.
a) 24 G 90.00 Sq Mtrs #NAME? 0.00
b) 22 G 100.00 Sq Mtrs #NAME? 0.00
18 Supply, Installation, Testing and Commissioning of Factory fabricated GI Volume Control damper(Manual) made of GI sheet construction 16G GI blade, 16G GI frame, lever mechanism comprising of Steel spindles, blade linkages with suitable handle operation including status indicator for supply and return air duct, ON/OFF indicators for dampers complete in all respect and as directed byEngineer-in-charge. 2.00 Sq Mtrs #NAME? 0.00
19 Supply, Fixing of Acoustic insulation for AHU room on the existing wall using 25 mm thick nitrile rubber open cell insulation with OEM recommended adhesive and density 140kg/cum having open cell foam structure of class 1 fire category provided in the suitable GI frame work as per site requirement. Complete in all respect as directed by Engineer in Charge. Note : Contractor should make sure that there should not be any sag/gap between wall & insulation after fixing the insulation. 167.00 Sq Mtrs #NAME? 0.00
20 Ducting Acoustic Insulation: Supply & Installation of Acoustic insulation for Supply air ducts with 15 mm thick open cell nitrile rubber with OEM recommended adhesive and density 140 kg / cum having open cell foam structure of Class 1 fire category as per technical specification.. 40.00 Sq Mtrs #NAME? 0.00
21 Supply, Installation & Testing of Thermal Insulation for Supply air ducts with 13mm thick Class-O, Close cell elastomeric nitrile insulation with suitable OEM recommended adhesive and density not less than 40kg/cum. Joints shall be overlapped and joints sealed with 75 mm wide aluminium foil self adhesive tape/suitable tape as per technical specification, complete in all respect and as per standard practice. 140.00 Sq Mtrs #NAME? 0.00
22 Supply and Fixing of Underdeck insulation for AHU room using 13mm thick Closed cell chemically cross linked polyethelene foam density of 30 kg/cum insulation material with one side factory laminated aluminium sheet to fix the insulation on the ceiling with additional support of GI frame/strip works for entire insulated area using GI washers and tie wires on perlins including all accesseries and required hardware as per site requirement and as directed by Engineer in charge. Note : Contractor should make sure that there should not be any sag after fixing the insulation. 75.00 Sq Mtrs #NAME? 0.00
23 Supply and installation of extruded aluminium powder coated supply air grills neck Size of min 550mm with 150mm/200mm width as per requirement with collar damper to modulate the flow 14.00 Nos #NAME? 0.00
24 Supplying, fixing, testing & commissioning of Return air grills of Size of min 550mm with 150mm/200mm width as per requirement without collar damper powder coated suitable for fixing on existing return air boxing made of gypsum grid complete in all respects as per the technical specifications. (Note: Measurement will be taken for neck size) 14.00 Nos #NAME? 0.00
25 Supply, installtion of Fresh air intake cowling with damper and bird mesh screen. The fresh air duct should be connected to mixing box.Fresh air duct is of 24 guage minimum and cost of duct work will be separtely paid. 1.00 Lot #NAME? 0.00
26 Supply, Fixing, testing and commissioning of Motorized UL555S rated smoke and fire dampers complete with spring loaded actuator including step down transformer, controller, feedback switch etc., suitable for 90 minute fire rating and control modules with required lengths of control wiring as per site requirments.The damper shall be motorized to close the damper and trip the AHU's in the event of smoke/fire automatically and open the same in case of power being restored, Complete in all respect 1.00 Sq Mtr #NAME? 0.00
27 Supply, Installtion,testing and commissioning of AHU control panel comprising of suitable incoming switch gear with control, indication, multifunction meter, provision for mounting VFD, including required PLC & HMI for complete monitering and control of followings: 1) Monitor and setting of humidity 2) Based on humidity, staging of 3 heater banks btw 35% to 60% 3) Safety interlocks. (Note: HMI to be fixed at the simulator area with necessary control cabling from HMI to AHU control panel complete in all respect.) Make of PLC and HMI: Schneider,Honeywell, Siemens 1.00 No #NAME? 0.00
28 Supply, installation, testing and commissioning Suitable capacity Stainless steel Pan humidifier kit of adequate capacity (min 30 KW) to be provided for seasonal operation comprising of immersion heater, float valve assembly, inlet, make up and drain water pipe connections, necessary piping with GI class `B' pipe, suitable control panel along with necessary cabling & earthing etc., and complete as required. Scope includes control panel, control cabling from PLC fixed in the AHU control panel upto Pan humidifer.The Inlet pipe connections along with valves, accessories to pan humidifier from nearby water point using 20mm dia CPVC pipe of approximate 20mtrs length shall also be part of the scope. 1.00 No #NAME? 0.00
29 Supply, fabrication, installation and testing the flexible canvass constructed of fire resistance flexible material for connecting between the ducting and AHU unit for effective control of vibration.The zip shall be provided to measure the tempearute of conditioned air and evalutae the tonnage/capacity of AHU 1.00 No #NAME? 0.00
30 Supply, installation, testing and commissioning of Heating section with finned type electric tubular heaters not less than (10KW x 3nos) in supply duct to achieve the final temprattue and RH ouput in room .The cost is inclusive of control panel and Supply, fixing of humidstat fixed in return air duct connected to mixing box.Scope incldues control cabling from humidistat fixed in retun air duct to PLC fixed in the AHU control panel. The heater should work in independent banks. 1.00 No #NAME? 0.00
31 Supply & installtion of Return Air boxing constructed out of Aluminium frame with Gypsum board of thickness 12mm around the supply air duct on wall with painting as that of hangar wall, including making necessary cutouts for supply/return air grills/jet diffusers/ dampers/Duct connections as required, complete in all respect. The above covering will be supported on 40X40X6mm MS angle fixed/grouted firmly to the wall at top, bottom and also middle level along the height of the boxing.The horizontal spacing shall not exceed a distance of 2Mtrs.The Return air boxing shall be fixed on MS angle by using GI bolts & nuts and shall be covered with suitable aluminum T channels/angle as per site requirement using aluminium cleats and rivets complete in all respect and as directed enginer-in-charge. Note : The MS support will be measured separately.. 265.00 Sq Mtrs #NAME? 0.00
Sub-Total of Part 'III' - Airconditioning Work (Excluding GST) #NAME? 0.00
Total of Part 'I' + 'II' + 'III' (Excluding GST) #NAME? 0.00
Add 18% GST #NAME? 0.00
Grand Total (Including GST) #NAME? 0.00
HINDUSTAN AERONAUTICS LIMITED
Facilities Management Division
Pre-Qulification Profile (To Be uploaded along with Part A)
Tender Ref No. or Contract No.: HAL/FMD/C-80/24-25
Name of Work: Construction of HTT 40 Simulator Building including Electrical and Air Conditioning Works at AFS Tambaram, Chennai.
Estimated Amount in lakhs.: 1016.5
Tender Notice Date:(DD/MM/YYYY) 09.10.2024 Can we give in DD/MM/YYYY
Complition Period(In months) 11
PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3 Kindly mention at Col I J &K as " Any Other related Information"
Sl.No Description Details Enclosed / Not Enclosed Any Other Related Information Remarks
1 Name of the Individual / Firm / Company: * Mandatory Pls enter name
2 Type of ownership Related Document to be Uploaded to eProcurement Portal
3 Year of Estblishment of Company/Business
4 If Other, please specify
5 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc., If not enclosed reasons be to recorded here
6 Address for correspondence:
8 PAN no and Name of Holder
9 PF number (If any)
11 (a) Service Tax Registration No
11 (b) Goods and Service Tax ID No.
12 Contact details
Contact person name Pls
Ph. No. with STD code
FAX No. with STD code 5 6
13 Registered Contractor
If Registered Contractor with HAL Yes/ No Pls Enter Related Document to be Uploaded to eProcurement Portal * Category: A = Above 25 Crores B = 15Crore to 25 Crores C = 5Crore to 15 Crores D = 1 Crore to 5 Crores E = Lessthan 100 Lakhs to 75 Lakhs F = 75 Lakhs to 50 Lakhs 0 7 .A1 1
Name of Organisation 199999 7 A 2
Category and Registration No. 200000 6 B 3
PEMD Amount ( If paid ) 499999 6 C 4
not required Need to Fill Column 19 no comparision 500000 5 D 5
14 I.T Returns for past 03 years 999999 5 E 6
2023-24 Pls Select 'Yes','No' for IT Returns for all the 3 years 2499999 4
15 Maximum value of works excuted during the followinf 5 years. . (In Lakhs)
2018 - 2019 Pls enter Finiancial Turnover in Rupees for all the years NOTE: The value of max work to be supported with the details of Works executed for each year including name of the organisation with period of execution. Here last 3 years cells to be considered to Check Annual Turn Over for 30 % value of Estimation given above 1 6.00 7.00 0 0
Avg Annual Turnover criteria is not met
16 DETAIL OF WORK ON HAND UPTO N-Months (N-contract period) [For Bid capacity calculation] NOTE : PROVISION for 10 works are given. If more, a separate similar sheet to be made showing all the works with all details as per this FORMAT and same to Uploaded. However, 9 works details to be provided and balance work value of other works to be added and to be provided in 10th row as OTHER works.
Sl.No(work No) Name of Organization with address Name of the work on hand Amount of Contract Rs (in Lakhs) Period of CONTRACT in months Date of Commencement of work as Work Order in dd/mm/yyyy Probable date of Completion as Agreed Actual progress achieved till date of Tender Notification Rs (in Lakhs) Balance value of work on hand [Col.(3)-Col.(7)] Rs (in Lakhs) Remarks If Any 0.00
8 0.00 Max Turn Over 07-08 8500000
9 0.00 Current Level to be brought by adding 10% for every year 10-11 8500000 X 1.1 X 1.1 X 1.1
10 0.00 Turn Over to considered A 11313500
0.00 Balance Work On Hand 207452000
Bid Capacity 0.00 Bid Capacity Criteria is not Met this shouldf be hidden while uploading
17 Work Schedule for completion of works with in stipulated time [Please enclose action plan / bar chart as to indicate the completion of work, within the scheduled time (contract period)] Bid Capacity (2 X A X N) - B
Related Document to be Uploaded -162198000
18 Quantity of work Excuted during the last three years
Earthwork [in Cum]
Concrete work [in Cum]
Reinforcement steel [in MT]
Any other quantity of items tenderer would like to mention
19 Bank(s) details: [Copy of the cheque leaf to be uploaded]
19a Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Name of the Bank
Type of Account
19b Bank Statement for past three month
19c Latest Over draft Facilties with Bank enter Name of Bank, Date of Issue and Value of Over Draft
20 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender Notice. SOLVENCY solvency cal
Name of Bank & Branch Pls Related Document to be Uploaded to eProcurement Portal 09.10.2024 1-Jul 0 40000
Date of Issue(dd-mm-yyyy) #VALUE! 200000 40000
Value Rs. In Lakhs 200001 150000
Solvency value is as per NIT
21 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Work experience certificates / Completion certificates should be uploaded for verification]. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of the estimated cost. [Amount put to the Tender] 40000 500001 250000
Completed similar works during last 7 years You are Not Eligible Pls Select Works Completed during last 7 years 1000000 250000
Work NoI Type of Work [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000
Name of The organisation
Brief Description of Work: 2000000 500000
Completed value of Work in Rs. Lakh: 2000001 1000000
Date of Commencement of Work [DD/MM/YYYY]: 4000000 1000000
Date of Actual Completion of Work[DD/MM/YYYY]: 4000001 2000000
Work No II Type of Work [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000
Name of The organisation
Brief Description of Work
Completed value of Work in Rs. Lakh:
Date of Commencement of Work [DD/MM/YYYY]:
Date of Actual Completion of Work[DD/MM/YYYY]: work done
Work No III Type of Work and Organisation name [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 09.10.2024 2555
Name of The organisation
Brief Description of Work: #VALUE!
Completed value of Work in Rs. Lakh:
Date of Commencement of Work [DD/MM/YYYY]:
Date of Actual Completion of Work[DD/MM/YYYY]:
Work Competion is NOT with in 7 years
Valid Class I Electrical Licence [or] Undertaking for engaging Electrical Contractor possessing valid Class I Electrical Licence Please Enter Electricial Licence No Electricial Licence valid upto Related Document to be Uploaded to eProcurement Portal
22 DEAILS OF TECHNICAL PERSONNEL AVAILABLE( if space provided is insufficant separate sheet to be uploaded with the same format as below)
Sl.No Name of members or technical personllel avalable in the organization Qualification of similar nature number of years of experience
23 DETAILS OF MACHINERY AVAILABLE
Sl.No Name of Mechinery No Make Year of Manufacture
1 Concrete Mixers - Type etc
2 Vibrators - Diesel - Electrical
3 Weiding equipment's
4 a) Rectifiers
5 b) Welding Generators
6 Erection equipment's
10 Water Lifting motor pumps
13 Drilling Equipment's
16 Stone crushers
17 Bitumen hot mixture plant
18 Bitume boiler
20 Batching plants
21 Vibratory rollers
23 Cranes-Details
24 Concrete pumps
26 Rock breakers
27 Transit mixers
29 Weight batches
24 Details of person holding the power of Attorney (If different from contact person)
Name Related Document to be Uploaded to eProcurement Portal
Ph. No. with STD code
FAX No. with STD code
I/We declare and confirm that - 1. All information and attachments submitted in this application are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my application and suspension of any registrations granted. 3. I/We shall not make refund claims of expenditure incurred in processing this application. Pls enter
26 Tender Document Cost and EMD details
Descipttion Enclosed / Not enclosed Valid upto [in case of BG] Related Document to be Uploaded to eProcurement Portal
Tender cost Enclosed
27 Average annual financial turn over during the last 3 years, ending 31st March 2023 [ should not be less than 30% of amount put to tender] and details for last 5 years to be provided to assess the bid capacity. The values provided to be supported by uploading Balance Sheet along with Profit & loss account statement. . (In Lakhs)
2022-23 Pls Select 'Yes','No' for Annual financial turn over for all the 3 years
Average 0.00 FALSE
Balance sheet and Profit & loss statement for last 05 years
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN36.pdf
TENDER_DOCUMENT • 1.46 MB
80PBFF.xlsm
TENDER_DOCUMENT • 0.10 MB
80PB.pdf
TENDER_DOCUMENT • 0.77 MB
80FPQ.xlsm
TENDER_DOCUMENT • 0.04 MB
ElectricalTenderDrawing02.pdf
TENDER_DOCUMENT • 0.06 MB
ElectricalTenderDrawing04.pdf
TENDER_DOCUMENT • 0.25 MB
ElectricalTenderDrawing06.pdf
TENDER_DOCUMENT • 0.16 MB
80Checklist.pdf
TENDER_DOCUMENT • 0.19 MB
ElectricalTenderDrawing05.pdf
TENDER_DOCUMENT • 0.17 MB
ElectricalTenderDrawing09.pdf
TENDER_DOCUMENT • 1.11 MB
MechanicalTenderDrawing01.pdf
TENDER_DOCUMENT • 0.10 MB
MechanicalTenderDrawing02.pdf
TENDER_DOCUMENT • 0.32 MB
80TBF.pdf
TENDER_DOCUMENT • 4.49 MB
80Amd.pdf
TENDER_DOCUMENT • 0.34 MB
ElectricalTenderDrawing03.pdf
TENDER_DOCUMENT • 0.05 MB
ElectricalTenderDrawing07.pdf
TENDER_DOCUMENT • 0.28 MB
80ECSForm.pdf
TENDER_DOCUMENT • 0.48 MB
CivilTenderDrawing.pdf
TENDER_DOCUMENT • 0.35 MB
ElectricalTenderDrawing01.pdf
TENDER_DOCUMENT • 0.05 MB
80PQPDF.pdf
TENDER_DOCUMENT • 0.20 MB
ElectricalTenderDrawing08.pdf
TENDER_DOCUMENT • 0.15 MB
80Undertaking.pdf
TENDER_DOCUMENT • 0.56 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .