GE (AF)/SGR-67/2025-26 REPAIR TO FLOORING, STAIRCASE, CONNCETING PATH AND ALLIED WORKS AT OMQ AREA UNDER GE (AF) SRINAGAR

Amount

M&L for rendering 15mm thick on other than fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement including taking down old existing plaster including scaffolding upto 12m height, complete all as specified and as directed.

Preparation of new plastered surfaces o wall and applying two coats of distemper oil emulsion including thin layer (1mm thick) of wall care putty and priming coat, complete all as specified and directed.

Taking down and refixing of shutters in same opening after easing and adjusting of any description exc 1 Sqm and n exc 2 Sqm each including resecuring/changing of builders hardware, complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:4 and including demolition of existing stone slab and tiles, complete all as specified and directed.

M&L for 25mm thick plain cement concrete, 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) as in sub base of floor finish even and rough to receive further floor finishes (tile/kota stone/ marble ), complete all as specified and directed.

M&L for 20-25mm thick machine cut Kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing / grinding and polishing upto mirror finish complete over and including 20mm thick screed bed in CM 1:6 and including demolition of existing stone slab and tiles, complete all as specified and directed.

M&L for 20-25mm thick machine cut kota stone slab as in riser of steps, skirting, dado and pillar jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing over and including 10mm thick backing coat in CM 1:4 and including demolition of existing stone slab and tiles, complete all as specified and directed.

M&L for polishing of old surfaces of marble/ granite/ kota stone work where ever required, intial preparation includes grinding the surface evenly with machine fitted with fine grade blocks (No.120) thereafter final grinding with machine fitted with the finest grade grit blocks (No. 320) carried out the day after the first grinding completed. After the final polish, oxalic acid shall be dusted over the surface at the rates of thirty three (33) gms per square metre sprinkled with water and rubbed hard with pad of wooden rags, the floor shall be wiped with a moist rag and dried with a soft cloth and finished clean, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness (below or above ground level), complete all as specified and as directed.

M&L for 50mm thick plain cement concrete, 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection, joint filled with bitumen sand mixer finished even and smooth without extra cement, complete all as specified and directed.

M&L for 75mm thick plain cement concrete, 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.

M&L for 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and direction.

M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and direction.

M&L for 10mm thick vitrified parking tiles heavy duty, exterior grade, textured finished of size 300X300mm over and including 15mm thick Screed bed or bedding layer in CM 1:4, complete all as specified and directed.

M&L for chequered cement concrete tiles size 300 mm x 300 mm x 22-25mm thick with grey cement and pigment , rubber moulded glossy finish, ISI marked, coloured, set jointed and pointed in neat cement slurry over and including 20mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for 100mm thick plain cement concrete, 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.

M&L for plain cement concrete, 1:3:6, Type C-1 (using 20mm graded crushed stone aggregate) as in coping, drain and RCC post etc. including necessary form work, complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc., complete all specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for Glazed ceramic tile 300x600x06-7mm thick (coloured) on vertical surfaces such as wall, dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for Light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for Light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat CM 1:4, complete all as specified and directed.

S&F in repairs 125mm dia CP grating doom with waste hole, complete all as specified and directed.

S&F in repairs 100mm / 75mm stainless steel grating, complete all as specified and directed .

Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule from dismantling / taking down items) worth Rs 1300.00 during AOC. (Note :- Tenderers shall not quote for this Schedule)

M/S SA INFRATECH (BID ID -3501799)

M/s PARVAZ CONSTRUCTION COMPANY (BID ID -3501080)

M/s Asif Enterprises (BID ID -3501671)

M/S Abdul Ahad Rather (BID ID -3501701)

M/S FAROOQ AND SONS (BID ID -3500751)

M/S TARIQ AHMAD SHEIKH (BID ID -3501567)

M/S Thakur & Sons (BID ID -3502028)