PROVN OF MT SHED AND INTERLOCKING TILES AT MT GARAGE OF 22 WEU AND ADDN/ALTN TO BATHROOM AT OFFRS MESS AT HQ LEH SUB AREA UNDER GE 865 EWS AT LEH

Amount

Excavating in post holes hard/dense soil (of similar holes) each n. Exc. 0.50 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and removing surplus soil to a distance n. Exc. 50m and making good surface complete all as specified and directed by Engr-in-Charge.

M & L for providing PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge.

M&L PCC 1:3:6 type C-2 (40mm graded crushed stone aggregate) as in walls or retaining walls, any thickness. size or shape including pilasters, buttresses, columns, pillars, boundary pillars and posts complete all as specified and directed.

S&F rolled mild steel structural steel work in tubular trusses, purlins, rafter, vertical posts, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular pipe channel or flat sections) including distance pieces, cleats, riveting including bending and welding, special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed by Engr-in-Charge.

S&F mild steel framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed by Engineer-in-Charge.

S&F Mild steel hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M & L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

M&L for surface dressing not exc 15 cm deep in soft/loose soil complete all as specified and directed by Engr-in-Charge.

M&L for site clearance in soft/loose soil complete all as specified and directed by Engr-in-Charge.

M&L for hard core of broken stone boulders of guage n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for filling behind the weep holes complete all as specified and directed by Engr-in-Charge.

M&L for 100mm thick plain cement concrete, 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified by Engr-in-Charge.

M&L for sand filling as a cushioning/bedding including watering and consolidation complete all as specified and directed by Engr-in-Charge.

M&L for machine pressed precast concrete interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed by Engineer-in-Charge.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dence soil complete all as specified and diected by Engr-in-Charge

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. N exc 10 sq m on plan and n exc1.5 m in depth and getting out hard/dense soil,complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed by Engr-in-Charge.

Removing excavated material n.exc 50 mtr and depositing where directed at a level n exc. 1.5 m above the starting point., complete all as specified and directed by Engr-in-Charge.

M&L for pre cast cement concrete block masonary of 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) with soild blocks, exc.10cm in width, set and jointed in cement mortor 1:6 complete all as specified and directed.

Demolition of precast concrete block masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.

M&L for formwork to rough finished flat surfaces of concrete, to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed by Engr-in-Charge.

M&L for formwork to rough finished flat surfaces of concrete, to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engr-in-Charge.

M&L for formwork to rough finished flat surfaces of concrete, to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed by Engr-in-Charge.

M&L for RCC M-25 (using 20mm graded aggregates) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S&F mild steel TMT bars of 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips , complete all as specified and directed by Engr-in-Charge.

All as per Srl Item No 25 here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as per specified and directed by Engr-in-Charge.

M&L 100mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in sub base, complete all as specified and as directed by Engr-in-Charge.

M&L for 25mm thick PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base/ levelling course including finishing the surface rough for laying finishes complete all as specified by Engr-in-Charge.

M & L for joint free Non-Skid coloured ceramic coloured tiles, first quality, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surfaces of size 450mm x 350mm x 7mm thick/ first quality, set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments. (Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) including 10mm thick screed bed below tile for dado/skirting CM 1:4 complete all as specified and as directed.

M&L for 20 mm thick granite machine cut, (of any type) work (table rubbed and polished) in steps, jambs, pillers, window cills, cooking plateforms and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match shade of granite stone including and polishing screed bed or bedding layer of mortar 15 mm thick for laying floor finished in CM as directed complete 1:4 complete all as specified and directed by Engr-in-Charge.

M&L rendering 15mm thick in CM 1:6 on other than concrete or brick surfaces as in wall finishes even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L rendering 15mm thick in CM 1:4 on fair faces of concrete or brick surfaces as in wall finishes even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L rendering 5mm thick in CM 1:3 on ceiling surfaces finish even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame of standard section for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.

S&F Anodised aluminium powder coated (minimum 50 micron thickness) door shutters, fixed type with sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodized aluminium fittings such as 100mm long (3 Nos),B-21 hinges, 200mm long (2 Nos) suitable handles, 250 mm long aluminium Tower bolt (01 No), 140mm long aluminium door stopper 01 No and aluminium snap beading, screws, etc. complete all as specified and as directed. Note: Glass/Wiremesh should be measured and paid separately.

S&F Powder coated aluminium partition wall of aluminium section (63x38x1.20mm) including aluminium beads, rubber gasket and 5mm thick tinted /frosted/Opaque glass complete all as specified and directed by Engr-in-Charge.

M&L for Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) (Glass / Wiremesh should be measured seperately) complete all as specified

S&F plain sheet glass 4.80 mm thick, ordinary quality, obscured or frosted and glazing with oil putty in square not exceeding 0.5 Sq. m in each pane complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered wall surfaces and applying two coats of cement base paint complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of alkali resistant primer with 3 mm thick white wall care putty or till the surface smooth complete all as specified and directed.

S&F 20mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings like elbow, socket, FTA, MTA etc fixed complete to walls, ceilings or in floors etc. including all fittings for fixing to walls complete all as specified and directed.

S&F 25mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings like elbow, socket, FTA, MTA etc fixed complete to walls, ceilings or in floors etc. including all fittings for fixing to walls complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipe 110 mm bore single socketed ,in any length with rubber ring joints, laid in trenches or in floors cement complete all as specified by Engr-in-Charge.

S&F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with oval access doors complete all as specified and directed by Engr-in-Charge.

S&F Grating doom 100mm of chromoium plated (minimum weight 60gms) complete all as specifeid and directed by Engr-in-Charge.

S&F one piece viterous China wash down water closet pan (pedestal pattern white) of size 710mmx390mm x790mm white with soft close seat cover & twin flush fittings, health faucet, PVC connection, angular stop cock/valve (2 Nos) with flange complete all as specified and directed by Engr-in-Charge. Make: Vitreous china wash down water closet (Pedestal pattern) Cat part No CRUISER S1013137S Trap 300mm of Cera or Equivalent make of Jaquar/Hindware

S&F Vitreous China Urinal full stall type white, Vitreous China Urinals bowl type (back or corner wall type), complete including flush pipe and waste pipe, providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe complete all as specified and directed. Make: Vitreous china CICILY LIDLESS URINAL Cat part No S4010102 of Cera or Equivalent make of Jaquar/Hindware

S&F wall Hung basin (Wash basin) with fixing accessories set of basin size 565x450x195mm complete all as specified and directed by Engr-in-Charge. Make: Cat part No CNS-WHT-801 of Jaquar or Equivalent make of Cera /Hindware

S&F tubular towel rail, 20mm dia, 600mm long, of aluminium fixed and including chromium plated brass screws and wooden /plastic cleats (minimum weight 270 gms) D type 4, complete all as specified and directed by Engr-in-Charge. Make: Cat part No F5003103 of Cera or Equivalent make of Jaquar /Hindware

S&F Soap dish (Oval shape) brass chromium plated fixed with and incl CP brass screws to walls (size of soap dish not less than 125mm long) etc complete all as specified and directed by Engr-in-Charge.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 120mm wide chromium plated bracket guard and railing 600mm long complete all as specified and directed.

S&F CP central hole basin mixer without Popup waste system with 450mm long braided hoses (pillar tap with mixer) complete all as specified and directed by the Engr-in-Charge. Make: Cat part No QQP-7167BPM of Jaquar or equal approved in Kohler/Cera

S&F two way, 15mm bore stop cock, fancy type, chromium plated with long shank and cup (two way, Angle valve type) cast copper alloy screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule complete all as specified and directed by Engr-in-Charge. Make: Two way angle cock Cat part No F200211 Garnet Quarter turn fitting 2 way of Cera or equal approved in Kohler/Jaquar

S&F 15mm two way bib tap long body with wall flange, fancy type, chromium plated brass screwed for iron pipe with capstain head complete all as specified and directed by Engr-in-Charge.

M&L Chromium plated brass paper holder complete all as specified and directed by Engr-in-Charge. Make: Cat part No F5004110 of Cera or equivalent in Jaquar/Hindware

S & F 75mm PVC Nahani trap, setting and jointing to waste pipe with solvent cement and fixed in Cement concrete type B-1 (1:2:4) (using 20mm graded stone aggregate) complete all as specified and directed

M&L for point wiring for one light point or fan point controlled by one light/exhaust fan controlled by one way switch with PVC insulated FRLS copper conductor stranded cable of size 1.5 sqmm and including PVC casing/caping terminated in existing sunk CI/pressed steel terminal boxes for fixing and 1.5 sqmm PVC insulated copper wire as earth wire connected to earth wire connected to earth folly and 3.0mm thick plastic laminated sheet cover all as specified and directed by Engr-in-Charge.

All as per item No 60.00 here-in-before but 1.5 Sqmm for one 3 pin 6 amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on the same board complete all as specified and directed by Engr-in-Charge.

All as per item No 60.00 here-in-before but 4 Sqmm complete all as specified and directed by Engr-in-Charge.

S&F modular switch one way 6 Amps, 230 volts, ISI marked complete all as specified and directed by Engr-in-Charge.

S&F Modular switch socket combination, 5 pin, 6 Amps flush type single pole ISI marked complete all as specified and directed by Engr-in-Charge.

S&F of modular cover plate with frame of 3 Module suitable for 3 Pin 6 Amps and 16 Amps, 230 volts complete all as specified and directed by Engr-in-Charge.

S&F of modular cover plate with frame of 6 Module suitable for 3 Pin 6 Amps and 16 Amps, 230 volts complete all as specified and directed by Engr-in-Charge.

S&F of modular metal flush box of 3 Module suitable for 5 Pin, 6 Amps and 16 Amps, 230 volts complete all as specified and directed by Engr-in-Charge.

S&F of modular metal flush box of 6 Module suitable for 5 Pin, 6 Amps and 16 Amps, 230 volts complete all as specified and directed by Engr-in-Charge.

S&F ceiling rose surface backlite two or three terminal complete all as specified and directed by Engr-in-charge.

S&F sheet metal enclousure SPN DBs with 200 Amps rated bus bar of 8 ways 240 volts with blank plate complete with double door complete all as specified and directed by Engr-in-Charge.

S&F MCB SPN 32 Amps, 240 volts, ISI marked, 10 KA 'C' series complete all as speciied and directed by Engr-in-Charge

S&F for MCB SP 6-32 Amps 'C' series, 240 volts, 50 Hz complete all as speciied and directed by Engr-in-Charge

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge. Make : Havells/Bajaj/Philips/Wipro .

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed by Engr-in-Charge.

S&F LED waterproof 8W up-down "U" shape IP 65 with metallic body best wall highlighter light (Warm white) complete all as specified and directed by Engr-in-Charge.

S&F Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, RPM 1200, copper winding of sweep 250 mm complete all as specified and directed by Engr-in-Charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 Sqmm 2 core nominal cross section in service connections complete all as specified and directed by Engr-in-Charge. Make as per PS.

Material and labour for earthing complete with galvanised steel earth plate 600 x 600 x 6 mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level connected to and including galvanised earth lead wire 4 mm dia by means of nuts, bolts, washers etc made of galvanised iron or steel and connected to test point and earth dolly as all shown in electrical plate No.3 of SSR Part-I 2009 and specified or indicated including testing on completion and excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, pre cast RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.0 kg/Sqm) with cast iron frame, funnel, with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore light grade GI protection pipe, test point, etc, complete all as specified and as directed. Note: (i) Item includes the cost of 7.5 m GI pipe for protection of earth lead. Any additional length shall be adjusted through deviation order. (ii) Item includes the cost of 7.5 m GI earth lead. Any additional in length shall be adjusted through deviation order ( For Main DBs ) (iii) Item includes the cost of Charcoal and commercial salt ( For Main DBs )

Mehar Enterprises

M/S UNITED CONSTRUCTION CO.

M/S MA CONSTRUCTION Co

THINLES OTZER

M/S MOHD KARIM

M/S SONAM RIGZIN

M/S MUNEER HASSAN AKHON

Takshos Enterprises

M/S GEE AAR and SONS ENTERPRISES