REPAIRS TO FALSE CEILING, ROOF, PLASTERING, WALL PANNELLING, ROOF TREATMENT AND SANITARY FITTINGS ETC AT LGJ MIL STN

Amount

Demolition of brickwork or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles including cleaning and stacking serviceable brick for re use and balance removing rubbish from the site complete all as specified and as directed by Engineer-in-charge.

M&L for brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed by Engineer-in-charge.

Dismantling asbestos cement (corrugated / semi corrugated) sheets including ridges as in roof covering all as specified & directed.

S & F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F armstrong mineral fiber accoustical suspended ceiling system with ANF(Micro look) EGE tiles with arm strong silhouette exposed grid. The tiles should have humidity resistance (RH) of 90%. NRC 0.5%. Light reflectance shall be more than 85% thermal conductivity K=0.052-0.057 w/mk. colour shall be white, fire perfomance class 0/class 1 (BS 4760 in module size of 600mmx600mmx15mm with bioblock coating on the face of tiles. suitable for green building application with recycle content of 63% the tiles shall be laid on arm strong silhouette profile grid system with 15mm with flanges incorporating 6mm central revel in white/black colour and with a web height of 45mm and and load carrying capacity of minimum 15.68kg/sqm.silhouette , main runner and cross runner shall have mitred end and birdsmouth notches to provides mitred juction.Tee section shall have a galvanising of 125gms/sqm complete all as specified and directed by Engineer-in-charge.

S & F anodised aluminium snap grid frame work size 605x605 mm for false ceiling complete all as specified and directed.

S & F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M & L for perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid complete all as specified and directed.

Taking down cement plaster from brick wall or concrete surfaces or ceiling including raking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L rendering 15mm thick cement plaster on brick walls or concrete, surface in CM 1:6 and surface to be finished even smooth without using extra cement complete all as specified & directed.

M&L for rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:4 and finished even and smooth complete all as specified & directed.

M & L rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surfaces of ceiling finishedeven and smooth without using extra cement complete all as specified & directed.

M&L preparing newly plastered surface of wall and applying 2 coats of acrylic distemper on walls over a coat of primer complete all as specified & directed

M&L preparing newly plastered surface of ceiling and applying three coats of white wash on ceiling complete all as specified & directed

M&L for preparation of new plastered surface of walls and applying two coats of cement base paint complete all as specified & directed

Disconnecting existing tanks capacity exc 250 and n exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed

Disconnecting existing tanks capacity exc 500 and n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in positioncomplete all as specified and directed

S & F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20mm dia pipe complete all as specified and directed. Note: Minimum weight 20 mm - 210 gms

S & F in repairs PTMT connection Nipple of 20mm dia suitable for HDPE water tank complete all as specified and directed. Note: Minimum weight 20mm- 45gms

Taking up or down steel tubing 15mm bore and connections, complete all as specified and directed

Taking up or down steel tubing 20mm bore and connections, complete all as specified and directed

Taking up or down steel tubing 25 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed

S&F 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as directed.

S&F 20mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as directed.

S&F 25 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as directed.

Dismantling of water tanks of capacity exc 250 and n.exc 500 ltrs and removing from site all as specified and directed.

S&F for Rotational moulded polythene water storage tank 500 ltr capacity vertical with closed top hoisted and fixed in position all as specified in SSR part-I. all as directed and including 20 mm bore PTMT float valve, connection nipple 2 Nos complete all as specified and directed..

Dismantling of water tanks of capacity exc 500 and n.exc 1000 ltrs and removing from site all as specified and directed.

S&F for Rotational moulded polythene water storage tank 1000 ltr capacity vertical with closed top hoisted and fixed in position all as specified in SSR part-I All as directed and including 20 mm bore PTMT float valve, connection nipple 2 Nos complete all as specified and directed..

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20mm bore all as specified.

Taking down PVC soil, waste & rain water pipe 100/75 mm dia including fittings fixed to walls, laid in floor etc complete all as specified and directed by Engr-in -Charge.

S&F 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates and conforming to Fe 410 -W (Gde- E- 250) quality- A.

M&L preparation of new steel surfaces over 10cm in width or girth & applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling of Brick tiles in floor or roof laid dry and pointed in cement morter complete all as specified and as directed by engineer-in-Charge.

Demolition mud in roofs, any thickness, including plastering and leeping complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 40 mm thick cement concrete type B0, 1:2:4 (12.5 mm graded stone aggregate) as in roof padding and laid in slope 1:30 complete all as specified.

M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm as in roof including cleaning surfaces all as specified and directed

M & L APP based membrance minimum weighing 3 KG per sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by torch application over 10mm thick screed bed in CM 1:3 mixed with WPC complete all as specified & directed.

M&L 40mm thick brick tiles laid flat joints grouted flush in cement mortar (1:3) bedded in 15mm th cement morter (1:6) mixed with 5% of curde oil by weight of cement complete all as specified and directed by Engr-in-Charge.

All as per above item No 43 here-in before but except tiles

S & F in repairs Vitreous China urinals, half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; grating and Union for discharge pipe complete all as specified and directed.

S&F in repair vitreous china wash hand basin coloured Flat back of size 550x400mm, including 32mm dia chromium plated waste coupling long screwed shank and fly nut, flanged end bedded in red led cement and other end fixed and PVC waste pipe including cutting for and pinning in ends of brackets in CM 1:3 all as specified .

Supply and fixing in repair PVC valve less, syphonic action type flushing cistern,10 ltrs capacity low level, white, with inlet ball valve, float, handle and telescopic pipe and connection to pipe and flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specified and directed by Engr-in-charge.

S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests com plete including rovision of lime concrete bedding complete all as specified and directed.

S&F in repair white vitrieous china wash down WC (Pedestal pattern) with fixing bolt, plastic water close seat cover, white closed pattern with flat bottom, and cover with aluminium hinging device, including all connection complete all as specified and directed by Engr-in-charge.

S&F in repair pillar tap, fancy type, cast copper alloy chromium plated with capston head, screwed down high pressure with or without lettered with long screwed shank and fly nuts, screwed for iron pipe of 15 mm bore complete all as specified and directed.

S&F in repair bib tap long body 15mm bore cast copper alloy chromium plated long body fancy type with capston head and cup screwed down, screwed for iron pipe or for brass ferrule all as specified.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair tubular towel rail, Brass chromium plated 20 mm dia, 'D' type, 60cm long between flanges complete all as specified and as directed by Engineer-in-Charge.

S&F in repair CP brass stop/angle valve fancy type 15 mm bore cast copper alloy screwed down high pressure fancy type fixed all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar complete all as specified and as directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in dado/skirting over and including 10 mm thick rendering on vertical surface in cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor all as specified and directed.

M&L for glazed ceramic coloured tiles joint free of size 450 x 300 x 7 mm thick on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the floor all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.06Sqm but not exc 0.11 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor all as specified and directed.

M&L for glazed ceramic coloured tiles joint free in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slury and pointed in white or colour cement to match over and including 10 mm thick backing coat in CM 1 :4 complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

Rounding off edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid over cement screed base laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed with grey cement slurry mixed with pigment to match shade of the slab including rubbing and plishing complete all as directed.

M&L for machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry mixed with pigment to match shade of the slab including rubbing and plishing complete all as directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm in thickness (below or above ground level) all as specified.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as directed.

M&L for 100 mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base below floors all specified and directed.

M&L Machine pressed precast concrete interlocking paver block glossy with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with over sand cushion incl dismantling all as specified and directed. Note : Sand will be measured and paid seperatly)

S&F in repair, shower rose, 125 mm size, brass chromium plated with sweivel joint all as directed.

S&F in repairs 32 mm dia low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors all as directed.

S & F in repairs 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

Taking down Shutters of any description exc 1 Sqm and n exc 2.00 sq. m eachs complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 Sqm but n -. exc 4.00 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down existing shutter and refixing in same opening shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each all as specified and directed. (Note:- 'Refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.)

S&F for 35 mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as directed.

S&F for 35 mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) all as directed.

S&F for powder coated anodised aluminium door shutters,, aluminium sections weighing not less than 0.55 Kg/m including necessary necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges (03 Nos), anodised aluminium snap beading, screws, complete all as specified Make of Al Section : Jindal / Hindalco / NALCO

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F for 200 mm long aluminium anodised barrel tower bolt, of extruded sections all as directed.

S&F for 150 mm long extruded aluminium alloy handle, fabricated type anodised all as directed.

S&F 100 mm long butt hinge, medium weight, cold rolled mild steel all as specified and directed.

S&F for 300mm long aluminium alloy, anodised, sliding door bolt type not less than 16mm dia fixed all as specified & directed by Engr-in- charge.

S&F for in repair 300mm ordinary rat tail rod pattern springs including roller and roller plate complete mild steel fixed complete all as specified and directed by Engr-in-Charge.

S&F for stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as directed.

S&F for 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as directed.

M&L for preparation of new wooden surface of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer all as specified.

M&L for preparation of old painted wooden surface of any description not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint all as specified.

S & F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and directed

S & F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including taking down existing wall panelling complete all as specified and directed.

S & F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing

S&F in repair stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F 3.0 mm sheet glass figured glass pin head and glazing with oil putty or with beading in square n.exc 0.5sqm in each pane complete all as specified and directed by Engr-in-charge.

S & F in repairs grating doom 100mm dia of PTMTwith waste hole or without hole complete all as specified and directed. Note :Minimum weight 25gms)

S & F repairs grating doom 125 mm dia with waste hole or with out waste hole of PTMT complete all as specified and directed. Note : Minimum weight 40gms

S&F in repairs stainless steel curtain rods, standrad quality, not less than 25 mm dia with heads , etc. complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old treated plastered surface of walls and applying two coats of cement base paint complete all as specified & directed

M & L for Complete removal of existing finishes and treating with two coats of oil bound distemper (any colour/tint) over a coats of alkali resistant primer over 3 mm thick wall care putty and including rubbing with emmery paper to make preparation of surface complete all as specified and directed by Engr-in-Charge.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

PAREEK AND COMPANY

Dashmesh Construction Company

M/s Tarun Traders

KHANNA CONSTRUCTIONS