Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.8 LAccepted-AOC | L1 | Accepted-AOC DUE TO QUOTED RATE IS L1 | |
| 2 | L2₹16.5 L+₹39,068 (2.43%)Rejected-Finance PO LEKHAPANI DIST TINSUKIA PIN 786 180 ASSAM | 786180 | L2 | Rejected-Finance DUE TO QUOTED RATE IS HIGH | |
| 3 | L3₹16.6 L+₹51,097.50 (3.18%)Rejected-Finance NAU PUKHRI ROAD MILLAN PALLY BYE LANE 2 NEAR GOYAL PALACE PO DISTT TINSUKIA ASSAM 786125 | TINSUKIA | ASSAM | 786125 | L3 | Rejected-Finance DUE TO QUOTED RATE IS HIGH | |
| 4 | L4₹17.3 L+₹1.2 L (7.46%)Rejected-Finance AT ROAD NEAR RENUKA CINEMA P O DIST TINSUKIA ASSAM PIN 786125 | TINSUKIA | TINSUKIA | ASSAM | 786125 | L4 | Rejected-Finance DUE TO QUOTED RATE IS HIGH | |
| 5 | L5₹18.2 L+₹2.1 L (13.2%)Rejected-Finance | L5 | Rejected-Finance DUE TO QUOTED RATE IS HIGH |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
7 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA, ASSAM
REPAIR TO DRAIN, BOUNDARY/SECURITY WALL, GATE, FENCING, PATH, CULVERT ETC IN ZONE-IVA, IVB AND VI AT MIL STN LEKHAPANI
2023_MES_574089_1
8713/E8
Open Tender
Miscellaneous Works
Item Wise
180 days
GE LEKHAPANI
Class E and category a (i)
8 documents required · 8 mandatory
₹500
GE LEKHAPANI
₹30,000
Yes
2 Mar 2023
10 Jan 2023
14 Feb 2023
10 Jan 2023
7 Feb 2023
24 Jan 2023
Amount
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water & removal of debris off the premises etc. complete all as specified & directed.
Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces and finished fair and even complete all as specified and directed by Engr-in-Charge.
Material and labour for prepration of newly plastered surface of wall and applying two coat of cement base paint over a coat of cement base acrylic primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work & precast concrete articles complete all as specified & directed.
Demolition of unreinforced cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed .
Material & Labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
All as per item No 6.00 here-in-before but except bricks complete all as specified and directd . (Note : Servicable Old bricks obtained from demolition shall be reused after cleaning and washing )
Material and labour for Brickwork with subclass ‘B’ bricks, straight for curved on plan to any radius as in half brick thick walls built in CM 1:4 complete with and including joints shall be neatly struck flush with same green mortar as the work proceeds all as specified and as directed.
All as per Item No 8.00 here-in-before but except bricks complete with and including joints shall be neatly struck flush with same green mortar as the work proceeds all as specified and as directed. Note :- Servicable Old bricks obtained from demolition shall be reused after cleaning and washing )
Material and labour for bricks sub class B laid on edge bedded and jointed in CM 1:6 and pointed in cement mortar 1:6 complete with and including joints shall be neatly struck flush with same green mortar as the work proceeds
Material and labour for Plain cement concrete (1:3:6) type C1 (using 20mm graded stone aggregate) as in surface channels etc complete all as specified and as directed.
Material and labour for cement concrete 1:2:4 type B-1 using (using 20 mm graded stone aggregate) as in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and as directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed surfaces embedded in concrete complete all as directed.
Excavating in post holes (or similar holes) in any type of soil each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm ,watering and removing surplus soil to a distance not exceeding 50m and making good surface (soft /loose soil) complete.
Material and labour for rolled mild steel section such as angle etc as in post and struts as in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, Flat iron fillets (for securing wiremesh etc ) including all necessary drilling , bolting or riveting etcand similar works conforming to Fe 410-0 or Fe 310-0, ccomplete all as specified and directed
Material and labour for PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.
Dismantling of chain link wire mesh of any type including removing of rusted unserviceable wire mesh, flat iton, round bar MS, nuts & bolts from work site and keep serviceable wire mesh, flat iton, round bar MS, nuts & bolts for reused in safe custody all as directed.
Supply only 3.7 mm dia galvanised steel wire, (Hot dipped galvanised), any type or size complete all as specviifed and as directed.
Fixing only chain link fencing to post old and new including line wires, any mesh , size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as directed.
Supply and fixing Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties/tie bars for roof/Chain link including securing bolts complete all as specified and directed
Supply and fixing Mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm but not exceeding 10 Cm long and dia of shank 11 to 15mm complete.
Restraining, resecuring including making good staples etc Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).
Supply and fixing Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) with and including taking down the same.
Material and labour for preparation of newly or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Material and labour for prepration of old plastered surface of wall and applying one coat of cement base paint including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.
Material and labour for prepration of old plastered surface of wall and applying two coat of cement base paint including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.
Material and labour for preparation of old painted surfaces of steel of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.
Material and labour for preparation of old plastered surfaces of walls and applying two coat of acrylic antifungal exterior emulsion paint over a coat of primer complete all as specified & directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry or laid dry and pointed complete.
Material and labour for Hardcore using broken stone or boulders of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface.
Material and labour for plain cement concrete (1:4:8), type D-2, (using 40mm graded stone aggregates) as in foundation filling and mass concrete, sub bsae etc complete all as specified and directed.
Material and labour for Chequered cement conc tiles cast in rubber moulded glossy finish of approved colour general purpose double layer of size 25cm x 25cm x 22mm thick with mixture of white and grey cement in equal proportions and pigments set and jointed and pointed in neat cement slurry in floor over and including 15mm thick bedding of cement mortar (1:6) complete all as specified and as directed
Material and labour for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete.
Material and labour for TMT bar 10mm dia and above cut to length bent to shape required including cranking hooking ends and binding with and including mild steel (annealed) wire not less than 0.9mm dia or securing with clips complete
Material and labour for providing precast reinforced cement concrete (1:2:4) Type B-1 using 20mm graded stone aggregate as in precast cover slab set in cement mortar 1:6 complete all as specified and as directed
Dismantling wrought cast iron or mild steel work of any description not otherwise provided for complete all as dirceted.
Material and labour for Framed work of rolled mild steel conforming to Fe-290 (GdeE165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering; doors etc to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting, running rails & guides) and hanging, fastening & fixing complete.
Supply and fixing mild steel best quality lathe machine made floor bushes and pintal hinges for steel gate welded to existing gate complete all as specified and directed by Eng-in-charge. Note:- Any additional Mild steel member welded shall be masured and paid separately
Taking down steel gates from its position and repair the same including thorughtining alignment properly including welding additional stiffer, brases, pintol hinges locking arrangement etc and erecting the same back in position after applying one coat of synthetic enamel paint in area of gate n.exc 5.00 Sqm each leaf all as directed (Note : Necessary MS sections such as angle, pipe, bars, flats , lathe /bush Pintol hinges shall be finished with necessary greasing and the same shall be be measured and paid seperately by weight )
RIA CONSTRUCTION
MAA COMMUNICATION
STANDARD ELECTRIC WINDERS
FREEZCON
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .