Estimate for Partial repair, painting and renovation of Canal Rest House Rupnagar.

Amount

Scraping (White wash and Colour wash)

Preparation of plastered surfaces including surface, applying filling with approved quality filler consisting of plaster of Paris and chalk mitti including finishing the surface to the required finish complete.

Wall Painting with Plastic Emulsion Paint of approved brand and manufacturer to give an even shade.(Two or more coats)

Finishing walls with Preimiun Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43 lt /10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm

Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.

Painting two coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.

12.50 mm thick cement plaster 1:4

Raking out joints in lime or cement mortar and preparing the surface for repointing or replastering including cost of neat cement and disposal of rubish to the dumping ground within 50 m lead

Cement Concrete 1:2:4 with stone ballast or shingle

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine with rubber moulded smooth finish by strong vibratory compaction and of approved size and design / shape laid in Dark fast Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge.IS code 15658 (2006)

Extra Cost for using darker fast shade for interlocking pavers Tiles of any shape & thickness instead of grey colours.

Providing Advanced direction Sign Board 1200x1800 mm rectangular as per IRC 67-2012 with retro reflective high intensity grade sheeting fixed over 2 mm thick alm sheet with 25x25x3mm angle complete in all respect.

REPLACEMENT OF WIRES, COVER FRAMES, MODULAR SWITCHES, CONCEALED METAL BOX AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIPE WIRING SYSTEM (WITH MODULAR TYPE ACCESSORIES):Wiring fan point (without fan box)

Wiring light point

Wiring 6 Amp.plug control compromising wall socket point

Wiring 16/20 amp. power plug control point

Supply and erection of PVC insulated FR single core un-sheathered copper conductor cable ISI marked suitable upto 1100 volts grade confirm to IS 694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by engineer-in-charge.Overall size 1.5 sq.mm(un-sheathered)

Overall size 2.5 sq.mm(un-sheathered)

Overall size 4.0 sq.mm(un-sheathered)

Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 4.0 sq. mm (84/0.3mm), 3Core

Supply and erection of RCBO (Residual Current Breaker Overload) for Earth leakage, overload and short circuit protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kA as per IEC 61009 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- RCBO Double Pole 32amp., Sensitivity 30mA

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-MCB single pole 6-32 amp.(10kA,Curve-C)

MCB single pole 40 amp. (10kA, Curve-C)

Providing and Fixing 9 WATT LED PANNEL (BAJAJ or Equivlent)

Providing and Fixing LED BATTEN 20 WATT( BAJAJ )

Providing and Fixing VOLTAS 2.O Ton 3 Star Split AC (Voltas 243 C ) Complete in all respect.

Providing and Fixing LG Commercial Lite 43LT340 C series 43" LED TV-Full HD Complete in all respect.

Providing and fixing pair of Plastic dustbins 100 litre volume each, of two different colours, for dry and wet waste, made of virgin plastic to be mounted on MS rectangular hollow section 50 x 25 x 3 mm frames pivoted on 3 MS square hollow section verticals, 1 m above ground, one 35 cm RHS welded to each vertical member at base and grouted in 180 x 40 x 30 cm 1:2:4 cement concrete.

Providing & fixing in position Water Dispenser Top Loading (with refrigration capacity 15 ltr) of approved make (to the approval of Engineerin-charge ) dispensing hot/cold/ambient water including cost of two no. 20 ltrs packaged drinking water bottles and carriage complete in all respect.

Providing & fixing in position UV filter having flow rate 200 ltr/hr with 3 stage purification process having 16 watt UV lamp and 35 Watt power rating of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect.

Providing & placing in position on terrace(at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -incharge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.

Providing and fixing in position automatic Plastic Ball Cock with rod and Plastic Ball in tanks.

1.8 meter high G.I. barbed wire fencing with 2.4 meter angle iron posts 50x50x6mm placed every 3 meters centre to centre 0.6 meter below ground level, every 15th post, end post, corner post suitably strutted and provided with 12 horizontal lines and two diagonals interwoven with horizontal wires fixed with GI staples, turn buckles etc. including foundation concrete 1:2:4 of size 0.30x0.30x0.75m for each post complete as per technical clause 808 of MORT&H specifications

Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality).

Providing & Fixing glass panes with nailsand putty or wooden strip complete in all respect

Providing & fixing 9" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.

Providing & fixing 250 X 10 mm anodized aluminum Mat Finish tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.

Providing & Fixing Hydraulic Door closer ISI mark with necessary screws etc complete

Providing and fixing in position towel rails / ring fixed in with rawl plugs embedded in walls with brass screws, complete in all respects(C.P brass towel rail size 15 mm dia 610mm long)

Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) Size 600mmx450mm

Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.( Aluminium khunti with 6 pegs)

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.(C.P. brass Bib cock foam flow without flange)

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. (PVC tube connection of size 15 mm x 300 mm with C.P. Brass nut)

Providing and fixing jet spray with 2'-6" long PVC pipe.(with CP brass nut)

Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.

Providing and fixing plastic hygenic seat cover with lid complete.(Seat Cover Constellation Soft Close Star white)

Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete.

Providing and fixing C.P. brass Urinal Spreader Ocular-Regular complete with fittings for urinals complete.

Providing and fixing Stainless steel health faucet complete in all respect.

Providing and fixing in position C.P. brass Tumbler Holder of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.

Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect.

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing and fixing in position vitreous chinaware white lavatory suites 450 x 300 mm of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.

Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineerin-charge ) fixed in with rawl plugs and C.P brass screws complete in all respect.

Supply of Bed Sheets Boublebed( Bombay Dyeing)

Supply of Cotton Pillow 33x56 cm( Bombay Dyeing)

Supply of Folding Bed(NA)

Supply of Kurl-on Bed Matterss 3'x6' (Kurl-on)

Supply of Plastic Neelkamal Armchair CHR2135 (Nilkamal)

Supply of Plastic outdoor Table ( Nilkamal)

Supply of Foot Mats ( Good Quality)

Supply of Foot Mats Hollow (NA) (OZONE)

Supply of BoneChina-Machine crafted-Dishes (Bone China Dinner Set )

Supply of Tea Set Sea Shell ( Bone China)

Supply of HCL Drinking Glass Large,Capacity 350 ml ( Borosil)

Any Other Items

AVTAR SINGH CONTRACTOR