84/W/EDC-I/SRE/2024-25

Amount

Detail of Work

Safe cartage of ST/PCC poles up to 8.5/11 Mtr. from ESC, SRE/JE store to site of work at various sites including loading & unloading at both ends.(Dist.Up to 25Km.)

Safe cartage of 250 KVA T/F from ESC,SRE, to the site of work including loading & unloading at both ends. (Dist. Upto 25 km.)

Safely cartage of Fuse set from ESC, SRE to the site of work including loading & unloading at both ends.

Safe cartage of Metering cubical from ESC,SRE, to the site of work including loading & unloading at both ends. (Dist. Upto 25 km.)

Safe cartage of CT/PT Unit from ESC,SRE, to the site of work including loading & unloading at both ends. (Dist. Upto 25 km.)

Erection of single support on ST poles up to 11 Mtr Long with complete fitting of all accessories of 11 KV/LT line. complete.

Fixing of 11 KV stay rods by digging of pits in block of 600X600X300 mm. & with nozzling of stay wire 7/10 SWG and fitting the same on the pole

Concreting of stay rod in ratio 1:4:8 with Ist class brick ballast with cement, sand

Concreting of ST poles SP-55, 11 Mtr. long with cement concreting in bolck of 600X600X1500 MM. in ratio 1:4:8 with cement, sand and brick ballast size 1''x1.5'' with plinth.

Providing of All type MS Clamp for ST/ PCC poles with nuts bolts made of new MS flat iron 50x6 mm.

Providing of Stay Clamp for ST poles with nuts bolts made of new MS flat iron 50x6 mm.

Providing of nuts & bolts of various sizes.

Safe installation of Metering cubical in the room with complete fittings including making connections and commissioning.

Safe installation of CT/PT Unit including making connections and commissioning.

Safely Installation of 11 KV Fuse set and making connection properly.

Providing of Danger Board with Clamp

Providing and fixing of Barbed Wire

Providing of Silver Paint (British/Asian/enamel paint)

Providing of Red oxide Paints (British/Asian/enamel paint)

Laying of 11 KV XLPE Cable 3x120/3x70 SQ MM

Making and fixing of 11 KV Jointing KIT O/D & I/D 3x120/3x70 SQ MM

Painting of ST poles 11 Mtr, SP-55 with 2 coats of synthetic enamel paint after one coat of ready mix primer as well as rubbing/cleaning of surface as required for proper completion of work. and remaining by Aluminium paint including all channels/clamps etc.

Laying, lifting, Stringing, sagging jumpring & binding of ACSR Rabbit Conductor for 11KV/LT Line including complete.

Construction of plinth for installation of 250 KVA T/F of size 1.5x1.5x1.5 Mtr. made of 9" thick wall in all the four sides with 6" thick RCC top duly filled with sand & plastered 12 mm. thick in ratio 1:4 with cement & sand on outer surface of brick wall .

Safe installation of 250 KVA T/F on the Plinth with complete fittings including making HT connections and commissioning.

Providing of Aluminum Bolted Type lug of size 240 sq mm.

Providing and fixing of wire mesh fencing size 2.5x2.5x2.5 mt. grouting making frame of MS angal 35x35x5 mm and fixing four no. MS strip size 25x6 mmat equal distance in between the frame and fixing square mesh 50 mm square in each frame the fencing should cover all side of T/F with providing 1 No. door size 6’x3’ with sitakni & Dandala.

/Water Level Earthing of 250 KVA T/F (1 No body & 1 No. neutral earthing) by boring of 60 Ft deep & fixing of 60 ft. G.I pipe 11/2" Dia (Jindal Class B) and connecting with G.I. Strip of size 40x5 mm and G.I wire at bottom of G.I pipe to the T/F providing of required charcoal & salt in the pipe

Earthing of pole by earthing road

Laying and making connections of LT XLPE cable 1x400 sq.mm.

Off shooting of tree branches touching the 11 KV/LT line.

FAGGU RAM & COMPANY (BID ID -5001420)

RAJ ENTERPRISES (BID ID -5000698)