S/R to KMT Road from 32.900 to 33.100km, 36.500 to 37.990km, 40.00 to 40.20km, 55.500 to 56.000km, 61.300 to 61.750km, 63.500 to 63.800km, 67.00 to 67.200km such as repair of Pot holes by providing Patch BM and SDBC.

Providing Tack coat on prepared bituminous surface with bitumen emulsion (RS) and spreading @ 0.20 kg per sqm using mechanical means as per Technical specifications and as per Clause-501 & 503 of MORTH specifications for road & Bridge works (5th Revision ) including cost, conveyance & other EMF,DMF and aditinal charges, of materials, cost of labour, machinery T&P etc complete. respect and as per direction of the Engineer-in-charge.

Providing Bituminous Macadam of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen, preparing preemixed materials with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per clauses 501 and 504 of MoRT&H Specifications for Road & Bridge works (5th Revision) &including cost of all materials, labour, T&P, Cess ,EMF,DMF and aditinal charges, royalty etc complete in all respect and as per direction of the Engineer-in-charge.

Providing and laying Semi Dense Bituminous Concrete (Grading-II) using 60/70 penetration grade Bitumen and crusher broken hard granite aggregates of specified grading, premixed with bituminous binder @ 5 per cent of weight of mix and filler in a Hot Mix Plant of 100-120 TPH, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction including cost of all materials, labour, T&P,Cess, EMF,DMF and aditinal charges, royalty etc complete in all respect and as per direction of the Engineer-in-charge.

Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam (WMM) specification, including pre-mixing of the material at OMC in a mechanical mix plant, carriage of the mixed material to the site, laying in uniform layers over a well-prepared surface and compacting to achieve the desired density.The rate shall include the cost of conveyance, royalty of all materials, labour, machinery, equipment and all other incidental works, complete as per the approved drawing, technical specifications and Clause 406 of MoRT&H Specifications for Road & Bridge Works (5th Revision).etc complete in all respect and as per direction of the Engineer-in-charge.