Repair/maints to pump motor, valves, water supply system, replacement of U/S pipe lines of SWTs and guard posts including connected accessories and day to day maint works at 39 FAD depot area at Mil Stn Bharatpur

Amount

Attending routine day to day maintenance of external water supply including rectification of minor defects by taking down of existing GI tubing 15 to 25 mm dia, cutting/threading and making joints and cleaning for any blockages, opening of float valve of service tanks, cleaning and fixing the same iin its position, above ground including replacement of GI unions /elbows/nipples etc as required at site complete all as specified and directed.

Ditto all as per Srl Item No 02 here in before but for GI tubing 40 mm dia to 80 mm dia. (Note for srl item Nos 1 to 2 : (a) Necessary GI fittings of as required at site shall be measured reparately as apply only. (b)The cost of excavation / earth work and repairs to damaged roads, existing structure etc shall be deemed to be included in the quoted unit rate

M & L for attending break down of water supply pipe line and repair to CI/DI/GI water mains of size 80 mm to 150 mm dia at a given notice including necessary excavation in mud in any type of soil by manual or using special T &P etc. De-watering from the trenches by using pump sets, rectification of leakages, fixing of CI specials such as collars bends/tail peaces etc and making joints complete all as specified and as directed.

M & L for attending break down of water supply pipe line and repair to CI/DI water mains of size 200 mm to 300 mm dia at a given notice including necessary excavation in mud in any type of soil by manual or using special T &P etc. De-watering from the trenches by using pump sets, rectification of leakages, fixing of CI specials such as collars bends/tail peaces etc and making joints complete all as specified and as directed. (Note for srl item Nos 1 to 4:-(a) CI/DI fittings, lead Joints, rubber joints etc shall be measured and paid separetely. (b)The cost of excavation / earth work and repairs to damaged roads, existing structure etc shall be deemed to be included in the quoted unit rate (c) The quoted rated is deemed to be inclusive of transportation and other expenses required for the resource deployment at the complaint site around scattered Military station under AOR of GE Bharatpur. (d) Work will be carried out in any area under juridiction of GE Bharatpur.

Supply only GI Union of size 50 mm

Supply only GI elbow of size 50 mm

Supply only GI socket of size 50 mm

Supply only GI equal tee of size 50 mm

Supply only GI barrel nipple of size 50 mm,150 mm long

Supply only GI reducer of size 50 mmx25 mm

Supply only GI Union of size 40 mm

Supply only GI elbow of size 40 mm

Supply only GI socket of size 40 mm

Supply only GI equal tee of size 40 mm

Supply only GI barrel nipple of size 40 mm,150 mm long

Supply only GI reducer of size 40 mmx20 mm

Supply only GI Union of size 25 mm

Supply only GI elbow of size 25 mm

Supply only GI socket of size 25 mm

Supply only GI equal tee of size 25 mm

Supply only GI barrel nipple of size 25 mm,150 mm long

Supply only GI reducer of size 25 mmx20 mm

Supply only GI Union of size 20 mm

Supply only GI elbow of size 20 mm

Supply only GI socket of size 20 mm

Supply only GI equal tee of size 20 mm

Supply only GI barrel nipple of size 20 mm,150 mm long

Supply only GI reducer of size 20 mmx 15 mm

Supply only GI socket 80mm

Supply only GI elbow 80mm

Supply only GI union 80mm

Supply only GI tee 80mm

Cutting existing water supply line for alterations and addition in length and screwing/threading or lengthening the screw on pipe to form connection and refixing etc for the following size: 33.01 15/20 mm dia

Replacing MS nuts, bolts , washer & MS flat, machine cut, hexagonal 5cm to 10cm long, dia meter of neck 16 to 20 mm or existing size and MS clamps of any size as per site requirement and complete.

Supply and replacement MS clamp /saddle piece made out of MS flat iron 40 x 60mm suitable to make ferrule and clamping for branch connections complete with GI socket welded it on one FI strip suitably positioned at the centre of pipe including drilling as per site requirement complete with MS nuts, bolts, washers and rubber packing for complete for following sizes of pipe: 35.01 150 mm bore

100mm bore.

80mm bore.

M&L of run lead joint to CI spigot and socketed pipe of bore 80 mm dia complete all as specified and directed

All as per Item No. 36 but of size for 100 mm CI pipe and –ditto-

All as per Item No. 36 but of size for 150 mm CI pipe and –ditto-

All as per Item No. 36 but of size for 250 mm CI pipe and –ditto-

Bends tapers any type, (straight, bend, increasing, decreasing or double socket etc). Tee pieces single branch "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs of CI fittings upto 250mm bore

Excavation of trenches in any type of soil n.exc 1.5 M wide and n.exc 1.5 M in depth for taking out / laying of pipe lines and getting out forming bottom surfaces to required gradients complete all as specified and as directed.

Returning, filling in and including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed

Removing excavated surplus materials to a distance not exceeding 50 Mtrs and deposited where directed at a level not exceeding 1.5 Mtr above starting point complete all as specified and directed.

Taking up or down G.I. tubing and connection and stacking neatly for reuse and removing the balance material from site of size 15 mm bore complete all as specified and directed.

All as per Item No.44 above but 20 mm dia and -ditto-

All as per Item No.44 above but 25 mm dia and -ditto-

All as per Item No.44 above but 40 mm dia and -ditto-

All as per Item No.44 above but 50 mm dia and -ditto-

All as per Item No.44 above but 80 mm dia and -ditto-

S&F GI tubing medium grade ISI marked including all fittings laid in trenches / fixed on wall of size 15 mm bore all as specified and directed.

All as per Item No. 50 above but of size 20 mm bore and -ditto-

All as per Item No. 50 above but of size 25 mm bore and -ditto-

All as per Item No. 50 above but of size 40 mm bore and -ditto-

All as per Item No. 50 above but of size 50 mm bore and -ditto-

All as per Item No. 50 above but of size 80 mm bore and -ditto-

M&L in repairs gun metal gate or globe valves with iron wheel head (ISI Marked), screwed both ends for iron pipe and fixed of size 20 mm bore

All as per Item No. 56 above but of size 25 mm bore and -ditto-

All as per item no 56 above but 40 mm bore and-ditto-

All as per item no 56 above but 50 mm bore and-ditto-

Taking out the unseviseable CI pipe lines including all fittings with spigot and socket ends and lead joints including burning out joints and recovering lead and cleaning the pipes internal/external for reuse the following bore of pipes:- 60.01 100 mm bore

150 mm bore

250 mm bore

Refixing and laying only cast iron pipe with spigot end socketed any class in available length obtained from item No.58 tested complete in trenches all as specified and directed for the following bore of pipe:- 61.01 100 mm bore

150 mm bore

250 mm bore

Supply, laying in trenches, under floor, under road, connecting, jointing and testing ductile iron pressure pipe centrifugally cast ISI marked with socket and spigot ends confirming to IS-8329/2000 standard length of K-7 specification with outside zinc coating complete including necessaary rubber gasket joints complete of the following sizes : Note :- (i) Excavation and earth work will be measured and paid separately. (ii) Rubber gasket joints shall be deemed to be included in quoted rate. 62.01 100 mm bore

150 mm bore

250 mm bore

Bends tapers any type, (straight, bend, increasing, decreasing or double socket etc). Tee pieces single branch "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs of DI fittings upto 250 bore

construction of brick masonry vavle pit of internal dimension 90cmx90cmx90cm depth with sub class "B' bricks in cm (1:4) and 10 mm thick plastering in CM(1:4),PCC (1:4:8) type D2 (Using 40mm grade broken stone aggregate) as in foundation lean concrete PCC (1:3:6) type CI (Using 20mm grade broken stone aggregate ) as in bedding and copping MS frame with 40x40x6mm angle iron 3 mm thick MS sheet cover plate with locking arrangement, hinges and two coats of sythetic enamel paint over one coat of red oxide primer including preparation of surface three coats of white wash on plaster surface (exposed to view) including necessary excavation in soft loose soil returning filling in and removal of surplus soil to a distance not exceeding 50 m complete allas specified and directed.

S&F in replacement of sluice valve 80 mm bore class PN-I with flanged and iron wheel head, shut and open directed cast on it and including jointing materials, rubber gasket suitable size nut bolts and washer etc complete all as specified and directed.

All as per item No. 65 above but of size 100 mm bore and –ditto-

All as per item No. 65, above but of size 150 mm bore and –ditto-

All as per item No. 65, above but of size 250 mm bore and –ditto-

supply and fixing in replacement of non return valve, flanged ends PN I ISI Marked of 100 mm bore complete all as specified and directed.

Supply only Water treatment Calcium hypo chloride 65%-70% chlorine content ( calcium based granular disinfectant for water treatment packed in 45 kg drum complete.

taking down water sample in suitable bottle for testing of bio and chemical each test as per ISO 10500 for the following locations. 71.01 Semi underground sump 100000 Glns capacity at Mallah pump house

Overhead reservoir of 50000 Glns capacity at sewar Fort

Semi underground sump 50000 Glns capacity at KLP Area

Perimeter area Tube Well No 07

Semi underground sump 100000 Glns capacity at Madoni hills

Overhead reservoir of 75000 Glns capacity at kanjoli line

in replacement of mild steel work or angles valve pit chamber covers, MS ladders/ frame work for UG Sumps OHTS frame work for motor pump sets, including nuts bolts washers for all kind of control valves / welding bending cold or hot drilling holes for boltes on any shape or size as indicated or directed and inclusive of one primer coat one under coat and one finishing of paint including taking out existing unserviceable MS work etc complete all as directed.

Dismantling of sluice valve of size 250 mm dia from existing pipe line and remove the spindle and inner gate and replace with new stainless steel spindle and require lathe work for inner gate at work shop and re- assembling the valve on its original position and testing complete all as specified and directed.

All as per above item No 73 but of size 150 bore

All as per above item No 73 but of size 100 bore

All as per above item No 73 but of size 80 bore

supply and fixing 1x 9 watt square shaped Integral decorative LED (Warm white) Bollard ploycarbanate diffuser and IP 65 protection and mounting of fitting with PCC foundation all as directed Make : Bajaj Cat Part No - BGBOS6009W LED

Supply and fixing 45 Watt (Warm white) LED Post of with high aesthetics and premium looks provided with die cast aluminum housing and polycarbanate opal diffuser and IP protection all as directed Make: Bajaj Cat Part No - BGCP45WLED WW

M&L submain wiring complete with 2X 4 Sqmm single core multi stranded PVC insulated and sheathed cable FRLS copper conductor and one run of 4 Sqmm copper cable for earth continuity conductor and including 25mm bore rigid PVC conduit with all PVC accessories fixed on concealed surface complete.

Dismanting centrifugal pumping set of 50HP capacity DSM after disconnecting electric supply complete to carry out the repair/replacement of UNSV/worn out spare parts, nuts bolts, washer etc. Note:- Necessary spare parts required for replacement at site shall be measured reparately as apply only.

Supply only coupling CI (set of 02 Nos)

Supply only bearing DE/NDE for 50 HP pump set.

Supply only rubber bush tapper/barret type ISI marked

Supply only shaft GM sleeves for pumps.

Supply only bearing housing

Supply only key for impeller MS.

Supply only vent valve brass.

Cutting of existing road/PCC path for laying of pipe line complete all as specified and directed.

M&L of PCC 1:2:4 type B-2, 40 mm graded aggregate filling and mass concrete, road finishing, thrust/protection blocks for pipe lines/ installation damaged PCC paths concrete all as specified and directed

PD GUPTA AND COMPANY

M/S BHULLAR CONSTRUCTION COMPANY