Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8,260Accepted-AOC 42 MEENACHI SUNDARAM ST KARUNGAL PALAYAM ERODE | ERODE | ERODE | TAMIL NADU | ₹8,260 | L1 | Accepted-AOC ACCEPTED |
| Sl No | Description | Qty | Unit | Om Technocrafts Corporation L1 |
|---|---|---|---|---|
| .10purchase of ECE Lab items | ||||
| 1.00 | SIM Card Reader Trainer kit
Specification:
Power Supply: • Operates on 230 V ac ±10%, 50 Hz mains supply. • Built-in regulated SMPS power supply. • Operating DC supply: 5 V / 12 V with overload and short-circuit protection. SIM Card Interface: • Supports GSM SIM cards compatible with 2G / 3G / 4G / 5G networks. • SIM card read/write interface. • Supports SIM card initialization, authentication, and communication functions. • Compatible with standard 6-pin / 8-pin SIM card sockets. Communication Interface: • USB 2.0 interface for PC communication. • RS-232 serial communication interface. • UART communication facility for embedded system interfacing. SIM Operating Parameters: • Selectable SIM clock frequencies: • 3.579 MHz • 7.159 MHz • 14.318 MHz • SIM supply voltage selection facility. • SIM reset and activation control. Supported Protocols and Standards: • GSM ETSI 07.07 and ETSI 07.05 AT command support. • ISO/IEC 7816 smart card communication support. • SIM communication command monitoring facility. Hardware Features: • On-board SIM card socket. • LED indication for: • Power status • SIM detection • Reset activity NO Rs.10000 11 • Data transmission/reception • Built-in keypad for standalone operation. • LCD display module (128 × 64) for menu and status display. • On-board microcontroller-based control section. Software Support: • AT command execution and monitoring software. • SIM manager utility software. • Data logging and communication terminal utility. • PC-based GUI software for SIM data communication experiments. Trainer Features: • Fault simulation facility for troubleshooting experiments. • Simulation of faults such as: • SIM not detected • Clock failure • VCC failure • Reset failure • Multiple on-board test points for signal observation. • Test points for: • SIM_RST • SIM_CLK • SIM_IO • VCC • UART TX/RX • Suitable for CRO/DSO signal monitoring. • Glass epoxy PCB with educational block diagram layout. • Compact tabletop enclosed cabinet design. Construction: • Front panel with printed block diagram. • Banana test points and patching facility. Standard Accessories: • GSM SIM trainer unit. • USB communication cable. • RS-232 communication cable. • Power cord. 12 • User manual. • Utility software CD / downloadable software package. | 1 | No | 7,000 ₹8,260 Lowest |
Tender Value
Refer Docs
Closing Date
15 Jun 2026, 10:30 amClosed
PRINCIPAL GOVERNMENT POLY COL KELAMANGALAM
PRINCIPAL GOVERNMENT POLYTECHNIC COLLEGE KELAMANGALAM-635113
ECE LAB ITEMS(SIM CARD READER TRAINER KIT)
2026_DoTE_678733_1
2790/B3/2026
Open Tender
Miscellaneous Goods
Supply
PRINCIPAL GOVERNMENT POLY COL KELAMANGALAM
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
18 Aug 2026
29 May 2026
16 Jun 2026
29 May 2026
15 Jun 2026
29 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 0.1 | purchase of ECE Lab items | - | - | - | - |
| 1 | SIM Card Reader Trainer kit
Specification:
Power Supply: • Operates on 230 V ac ±10%, 50 Hz mains supply. • Built-in regulated SMPS power supply. • Operating DC supply: 5 V / 12 V with overload and short-circuit protection. SIM Card Interface: • Supports GSM SIM cards compatible with 2G / 3G / 4G / 5G networks. • SIM card read/write interface. • Supports SIM card initialization, authentication, and communication functions. • Compatible with standard 6-pin / 8-pin SIM card sockets. Communication Interface: • USB 2.0 interface for PC communication. • RS-232 serial communication interface. • UART communication facility for embedded system interfacing. SIM Operating Parameters: • Selectable SIM clock frequencies: • 3.579 MHz • 7.159 MHz • 14.318 MHz • SIM supply voltage selection facility. • SIM reset and activation control. Supported Protocols and Standards: • GSM ETSI 07.07 and ETSI 07.05 AT command support. • ISO/IEC 7816 smart card communication support. • SIM communication command monitoring facility. Hardware Features: • On-board SIM card socket. • LED indication for: • Power status • SIM detection • Reset activity NO Rs.10000 11 • Data transmission/reception • Built-in keypad for standalone operation. • LCD display module (128 × 64) for menu and status display. • On-board microcontroller-based control section. Software Support: • AT command execution and monitoring software. • SIM manager utility software. • Data logging and communication terminal utility. • PC-based GUI software for SIM data communication experiments. Trainer Features: • Fault simulation facility for troubleshooting experiments. • Simulation of faults such as: • SIM not detected • Clock failure • VCC failure • Reset failure • Multiple on-board test points for signal observation. • Test points for: • SIM_RST • SIM_CLK • SIM_IO • VCC • UART TX/RX • Suitable for CRO/DSO signal monitoring. • Glass epoxy PCB with educational block diagram layout. • Compact tabletop enclosed cabinet design. Construction: • Front panel with printed block diagram. • Banana test points and patching facility. Standard Accessories: • GSM SIM trainer unit. • USB communication cable. • RS-232 communication cable. • Power cord. 12 • User manual. • Utility software CD / downloadable software package. | 1 | No | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.72 MB
BOQ_815424.xls
BOQ • 0.24 MB
ecelabext2.pdf
PDF • 0.37 MB
ecelabextension.pdf
PDF • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .