Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.1 LAccepted-AOC HARI NIWAS DHANDA P O TOTU TEHSIL DISTT SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹13.4 L+₹31,028.59 (2.37%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹13.4 L+₹35,609.85 (2.72%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹13.7 L+₹63,756 (4.88%)Rejected-Finance | L4 | Rejected-Finance Rejected | |
| 5 | L5₹13.9 L+₹83,659.31 (6.40%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
₹9.0 L
EMD Value
₹18,000
Closing Date
4 Jul 2020, 10:30 amClosed
Executive Engineer RB MC Shimla
Executive Engineer RB MC Shimla
Construction of Toilet and Book Cafe at Mandi Road near Thakur Building in ward No 6 Totu
2020_MC_38277_13
1211Dated08062020
Open Tender
Civil Works
Item Rate
120 days
Shimla
Please refer Tender Documents
6 documents required · 6 mandatory
₹350
Executive Engineer RB MC Shimla
₹18,000
14 Aug 2023
23 Jun 2020
4 Jul 2020
23 Jun 2020
4 Jul 2020
23 Jun 2020
Amount
Cutting in earth work in all kinds of soil including spade work, pick work, jumper work and blasting work and disposal of excavated earth up to all leads and lifts as directed by Engineer-in-Charge. (Disposal of earth/muck in MC dumping site at Bharyal free of cost, transportation charges will be paid extra)
Excavation in earth work in all kinds of earth work including spade work, pick work, jumper work, B/work chiseling wedging out of rock etc. up to all lifts in earth work including dressing of sides and bed and disposing of excavated earth to be leveled and neatly dressed as directed by the Engineer-in-charge. (Disposal of earth/muck in MC dumping site at Bharyal free of cost, transportation charges will be paid extra)
Providing and laying cement concrete 1:6:12 (1 cement: 6 sand: 12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of centring and shuttering in Foundation and plinth
Random rubble maonsry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement: 6 sand; 12 graded stone aggregate 20mm nominal size) at plinth level in cement mortar 1:6 (1 cement: 6 sand)
Stone filling behind retaining walls :
Providing and laying cement concrete work 1:2:4 (1 Cement:2 Sand:4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Suspended Floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever upto floor twolevel
Columns, pillars posts and struts upto floor two level.
Providing mild steel/ Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor all level-tor steel
Providing from work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling upto all heights and removal of the same for insitu-reinforced concrete & plain concrete work in Floors etc.upto 200mm. in thickness.
Sides and soffits of beams, beam haunchings, cantilevers, girders, bressumers and lintels exceeding 1 Mtr. in depth in all heights from floor.
Edges of slabs and breaks in floors and walls: Above 20 cm. wide.
Brick work using common burnt clay building bricks in foundation and plinth in :-Cement Mortar 1:6 (1 Cement : 6 Sand) Second Class Bricks
Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought,framed and fixed in position. 2nd class deodar wood.
Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws. 2nd class deodar wood.
Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size)
Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete. 250x16mm
Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete. 250x10mm
Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. 125 mm
15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:4 (1Cement:4 Sand)
Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.
Applying one coat of distemper primer of approved brand and manufacture on wall surfaces after thoroughly brushing the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.
Distempering (two coats) with oil bound washable ditemper of approved brand and manufacture of and of required shade of undecorated wall surfaces to give an even shade over and including a priming coat with Alkali-resistance primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even andsand papered smooth.
Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting. Readymixed paint brushing wood primer pink
Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping With enamel paint other than white
Providing and laying cement concrete 1:2:4 (1 cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in Foundation and plinth
Providing and laying granite stone in flooring 20mm(average)thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick
White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry.
Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. In gratings framed guard bars, ladders, railling, brackets and similar works.
Supplying and fixing expended metal to wood or steel members in partitions etc. Weight exceeding 5kg. and not exceeding 8kg. per square metre.
Providing & fixing sand cast iron cast (spun) springot and socket soil waste and ventilating pipe (Lead chauked joints to be measured and paid for sparately) 100mm nominal size
Providing and fixing sand cast iron/cast iron spun fittings and accessories:- Bends of required degree (any radius) 100mm nominal size
Plain 100mm nominal size
Single equal Branch of reuired degree 100mm nominal size
Collar 100mm nominal size
Providing lead peaulked joints to sand cast iron cast (spun) iron pipes and fittings including testing of joints 100mm nominal size
Providing and fixing vitreous china water closet squatting pan (Indian type W.C. pan)size 580mm (earth work, bed concrete, foot rest and trap to be measured and paid for separately) – Orrissa pattern
Providing and fixing 100mm size ‘P’ or ‘S’ trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 (1 cement: 1 sand) – sand cast iron
Providing and fixing Viterous China wsh Basin with single hole for piller tap with CI or MS braket paneel and making good the same but excluding fitting 600x450mmx250mm
P/F C.P. Brass waste for wash basin or sink 32mm dia
P/F M.I. Union for wash basin or sink 32mm dia
P/F 32mm dia lead waste pipes for wash basin or sink including brass check mate
P/F Brass bib tap (Suprerior or heavy type) 15mm dia
P/F C.P. Brass bib tap with capstam head 15mm dia
P/F G.I./M.I. Union of following sizes (where not including in the items) 15mm dia
P/F brass stock cocks 15mm dia
Water storage tank 1000ltrs (Double Layers)
P/F to wall ceiling and floor galvanised mild steel truses (medium grades tube fitting clamps including making good the wall ceiling and floors.
P/F Viterous china bowl pattern urinal connection with waste pipe by means of white lead mixed with chopped hamp waste water pipe to be measured paid to be seprately flat back type of size 433x260x350mm
Divesh Sharma
Udho Ram Dhiman
KHEM RAJ SHARMA
CHAMAN LAL
MANMOHAN SHARMA
HEM LATA GUPTA
jeetramcont.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .