SPECIAL REPAIR/REPLACEMENT OF OH LINES OF SECURITY LIGHTS IN X AREA (PH-I) AT 54 ASP AF GURGAON

Amount

M&L for fixing of pole, 'J' type Bolts, single Arm Standard bracket & street light including excavation 0.45x0.45x1.5 Mtrs size, M-20 cement concrete work vibrating concreating mixing with necessary steel (27.27Kgs) reinforcement for 9 Mtr octagonal pole including 2x 63mm dia flexible PVC pipe of 0.5mtr for cable entry/exit at a depth 0.45 Mtr, TMT steel bar of 8mm dia to be placed at 190 c/c both ways for raft and 4 Nos vertical bar with 12mm dia bar stirrups/rings at 190c/c for columns complete with suitable PCC 1:3:6 type C-2 using 40mm graded stone aggregate lean concrete including of returning, filling in and removal of surplus soil to a distance not exc 50 m complete all as specified and directed. Note :- Supply of Pole, 'J' Type Bolts, Bracket & street light shall be measured and paid seperately under respective item of this schedule.

Supply of 9mtr high powder coated hot dip galvanised octagonal poles with bottom size155mmA/F & top size 70mm A/F made up of 3mm thick HT Sheet alongwith base plate of size 260mmx260mmx16mm (without bracket) complete all as specified and directed. Make : Bajaj/Utkarsh India Ltd/Mac Tech International Ltd/Ignite Electronics Noida

Supply of M24x700 Long 'J' type EN8 grade foundation bolts along with template complete all as specified and directed. Make : Bajaj/Utkarsh India Ltd/Mac Tech International Ltd/Ignite Electronics Noida Note:- One set means 04 Bolts and with template and washers

Supply of 1mtr long hot dip galvanised single arm standard bracket made up of 40NB dia GI pipe suitable to mount on pole having top 70mm A/F complete all as specified and directed. Make : Bajaj/Utkarsh India Ltd/Mac Tech International Ltd/Ignite Electronics Noida

Supply of energy saving environmental friendly, long life IP65 LED street light fitting type 70Watt complete all as specified and directed. Make : Bajaj/Utkarsh India Ltd/Mac Tech International Ltd/Ignite Electronics Noida

M& L for dismantling of over head ACSR conductor, cross arms of MS channel or angle section fitting from cement concrete poles complete all as specified and directed.

M&L for taking out old concrete poles 9 mtr long by Hydra/Crane including breaking PCC foundation, and all related work and making the site well finished including removing the debris out side MOD land complete all as specified and directed.

M&L for dismantling of old street lights of any capacity from the cement concrete poles complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70sq mm 3.5 core complete all as specified and directed. Make: Havells/Gloster/Polycab

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50sq mm 3.5 core complete all as specified and directed. Make: Havells/Gloster/Polycab

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16sq mm 2.0 core complete all as specified and directed. Make: Havells/Gloster/Polycab

Excavation in trenches in soft/loose soil , not.exc 1.5 mtr wide and not.exc 1.5 mtr deep and getting out in soft/loose soil for laying of cable/foundation of pole and stay etc complete all as specified and directed.

Removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above ground level from starting point complete all as specified and directed.

Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed.

M&L for sand cushioning in trenches for protection of LT under ground cable including watering and consolidation complete all as specified and directed.

Supply and laying well burnt sub class ‘B’ bricks, locally available in trenches for protection of underground cable complete all as specified and directed.

M&L for drilling hole under hard standing /road in different location as per site requirement (between 03 mtr to 12mtr maximum) for laying of pipe for protection of cable etc by means of bookie and without disturbing the top surface and making good the disturbed surface if any complete all as specified and directed.

S&F GI pipe light grade 40 mm dia for cable protection complete all as specified and directed.

S&F 02 core, 1.5Sqmm PVC insulated and PVC round sheathed multi core bright annealed bare copper conductor heavy duty industrial flexible cables for voltage grade 1100 Volts conforming to IS: 694:2010 complete all as specified and directed. Make: Finolex/Havells/Polycab

S&F of outdoor type panel factory made polycarbonate 3.15mm thickness sheet (shock proof,rust free, corrosion free,dust proof, acid and chemical resistant,fire retardant, having high impact,made of halogen and silica free,recyclable material), UV resistant, having high grade gasket made of polyurethane,should withstand glow wire test at 650C should be flame retardant,the feeder pillar panel should be as per ERDA Certification with switchgear assemblies as per IEC 60 439-1.following tests performed and passed and satisfactory : (i) Temperature Rise (ii) Dielectric properties (iii) short circuit withstand current Rate peak & shor time withstand current and Rated conditional short circuit current (iv) Effectiveness of protective circuits. (v) Clearance & creep age distance. (vi) Mechanical operation, mounted on angle iron frame of size 40mm X40mmX6mm thick complete with necessary PCC 1:3:6 tpye C-1 using 20mm graded stone aggregatefor foundation work complete all as specified and directed. Make of Panel:- Unilac/ Schneider / Universal Switch Gear Control/ Tricolite.

Supply, installing, testing and commissioning factory made and tested LT Panel Outdoor type of size 1050 X 450 X 1200 mm ( LxWxH ), platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated electrolytic Aluminium bus bars TPN of capacity 300 Amps rating installed on DMC insulators with bus bar chamber. The panel shall be dust and vermin proof, and made out of 3.15 mm thick CRCA mild steel sheet and mild steel & Angle frame work of 50X50X6 mm ), front opening type with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLS cable of adequate size but not less than 1.5 sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey RAL- 7035 shade complete with necessary PCC 1:3:6 type C1 using 20mm graded stone aggregate foundation work complete all as specified and directed at site. The scope of work also comprising of the following:- Make of Panel:- Unilac/ Schneider / Universal Switch Gear Control/ Tricolite.

Note : The panel manufacturer should have following Govt. Approved Certificates: 1. CPRI Certification degree of Protection IP-54 2. CPRI Short Circuit withstand strenght should be 50kArms for 1.0 Sec with intial peak of 105kA 3. CPRI Certification Rated current for short circuit not less than 4000 A with rated insulation voltage 660V 4. ISO 9001 CERTIFIED

S&F of MCB 240 volts, SP 6- 32Amp,10KA breaking, capacity,complete all as specified and as directed. Make : Havells/L&T/Legrand

M&L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.3mm thick, buried directly in ground (earthpit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead with 4mm dia GI wire by means of bolts, nuts and check nuts and washers of GI or steel all as shown in Electrical plate No 5 including earth work fenal with watering arrangement, wire mesh, GI pipe 50mm internal dia bore buried directly vertical and adjacent to the electrode for watering , PCC pit 1:3:6 type C-1using 20mmgraded stone aggregate and RCC chamber cover in 1:2:4 type B1 of size 550 x 550mm with 8 mm dia TMT bar of 100mm C/C both ways including of returning, filling in and removal of surplus soil to a distance not exc 50 m as specified and directed including testing on completion.

M&L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.3mm thick, buried directly in ground (earthpit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth strip of 32x 6 mm by means of bolts, nuts and check nuts and washers of GI or steel all as shown in Electrical plate No 5 including earth work final with watering arrangement, wire mesh, GI pipe 50mm internal dia bore buried directly vertical and adjacent to the electrode for watering , PCC pit 1:3:6 type C-1using 20mmgraded stone aggregate and RCC chamber cover in 1:2:4 type B1 of size 550 x 550mm with 8 mm dia TMT bar of 100mm C/C both ways including of returning, filling in and removal of surplus soil to a distance not exc 50 m as specified and directed including testing on completion.

LAMBA ENTERPRISES

BRIJ MOHAN LAL AND CO.

Phogat Builders

Rajindera Enterprises

M P TYAGI ENGINEERS AND CONTRACTORS

Vijaypower Generators Limited

J.P. Enterprises