SPECIAL REPAIRS TO P-25 (OLD INLIVING OFFICERS MESS) AT NOFRA UNDER GE (NW) MANKHURD

Amount

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water , etc complete all as specified and directed.

Chipping, removing carefully loose/damaged concrete including plastering (total thickness upto 60mm ) from surfaces of RCC members, in any location by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land complete all as specified and directed. Note : 1) Hard concrete shall not be removed by force. 2) Item No.1.00 will not be applicable for the locations/areas where item No.2.00 is applicable.

M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hour between the coats, complete all as specified and directed. [Note :- Mode of measurement: superficial area covered between the end to end reinforcement bars (i.e., concrete area excluding all side covers) will be measured.]

M&L for Anticorrosive Treatment to Reinforcement using IPNET-RB of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces complete all as specified and directed. Note :- Mode of measurement: superficial area covered between the end to end reinforcement bars (i.e., concrete area excluding all side covers) will be measured.

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application complete all as specified and directed.

M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit, upto 20mm thickness while the bonding agent is still tacking, including levelling, profiling etc, complete all as specified and directed.

M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit while the bonding agent is still tacking, exceeding 20mm thickness and not exceeding 40mm thickness in two layers, each layer not exceeding 20mm, including levelling, profiling etc, complete all as specified and directed.

M&L for 10 mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing surfaces even and smooth complete all as specified and directed Make: Easy Plast from M/s wall plast or chemplast or readyplast from Ultratech” Note: (i) The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with ready mix plaster and nothing extra shall be payable on this account. (ii) This item shall be operated only for the locations where the thickness of existing adjoining plaster is to be matched

M&L for 5 mm thick polymer modified ready mix cement based plaster on surfaces of ceiling including finishing the surface even & smooth without using extra cement, complete all as specified and as directed. Make : Easy plast from M/s wall plast or chemplast or Readiplast from ultratech. Note: The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with the ready mix plaster and nothing extra shall be payable on this account.

M&L for 12 mm thick polymer modified ready mix cement based plaster on the wall surfaces mixed with liquid water proofing compound in the proportion as per manufacturer’s instructions and including finishing the surfaces of the top layer even and smooth, complete all as specified and directed, Make : Easy plast from M/s wall plast or chemplast or Readiplast from ultratech. Notes : (i) The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with the ready mix plaster and nothing extra shall be payable on this account. (ii) WPC shall be paid for separately.

Supply only liquid water proofing compound.

M&L for providing TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips in various structural RCC elements like columns, beams, Slabs etc. including cutting, bending, fixing of bars with welding/ tying as required at site with & including binding wires etc. and all relevant works like anchoring of the bars in the existing RCC Members, complete all as specified and directed.

M&L for prepration of newly plaster surface of wall two coats plastic emulsion coat, of approved manufacturer, of required shade and colour Incl 10 mm plaster of paris putty over a coat of alkaline primer complete, as per manufacturer's specification.

M&L for prepration of newly plaster surface of ceiling two coats plastic emulsion coat, of approved manufacturer, of required shade and colour Incl 2 mm plaster of paris putty complete, as per manufacturer's specification.

M&L for prepration of old plaster surface of ceiling complete removal of existing treatment and two coats plastic emulsion coat, of approved manufacturer, of required shade and colour Incl 2 mm plaster of paris putty complete, as per manufacturer's specification.

M&L for prepration of old plaster surface of wall complete removal of existing treatment and two coats plastic emulsion coat of approved manufacturer, of required shade and colour Incl applying 10 mm plaster of paris putty over a coat of alkaline primer complete, as per manufacturer's specification.

M&L for leak/seapage proof coating consisting of preparing the surfaces of Newly plastered or existing exterior walls, parapet walls chajjas etc, with wire brush to remove all loose dirt, oil grease etc, and filling cracks above 5mm thickness with Dr Fixit Pidicrete URP or with plaster seal of STP Ltd and cracks less than 5mm with Dr Fixit Crack X powder or with plaster seal of STP Ltd or Dulex Aqua tech base coat and applying one coat Dr Fixit primeseal primer or STP Ltd (and allow to dry for 8 hrs) under torch dry condition and subsequently two coats of water proof decorative elastomeric coating system; of Dr Fixit Raincoat with DFT 100 microns or shalicry 215 of STP or Dulex weather sheld(The surface after painting one coat shall be allowed to dry at 6 hours befor next coat) etc, complete all as per manufacturer instruction including necessary double scaffolding (building ht upto 24mtr) with out damages the existing wall surface etc and all as specified and directed. (Note: The contractor will enter into triparty aggrement with manufacturers ,MES as one party regarding the gurantee clause of Seven/Ten years.)

M & L for preparation of old painted wood surfaces of any description, not otherwise described over 10cm width or girth applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description, not otherwise described over 10cm width or girth applying two coat of synthetic enamel paint over one coat of red oxide, zinc chrome primer complete all as specified and directed.

Demolition of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan n.exceeding 6m mean radius built in CM 1:4 all as specified.

Demolition of cement concrete (un-reinforced) in ground floors and pavings any thickness (below or above ground level) all as directed.

M&L for providing 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, surface finished even & smooth without using extra cement, complete all as specified and directed.

S & F 100 mm thick cement concrete type B-1 1:2:4 ( 20mm Graded agg) as in floor all as spd.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubish off the premises.

M & L for dark shade /double charged /ultracharged vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tiles exceeding 0.42 sqm but n.exc 1.00 sqm, in floors etc. set and jointer in neat cement slurry and pointed in white or coloured cement to match the shade incl 15mm thick CM 1:6 screed bed for laying floor finishes complete all as specified and directed.

All as per items No 26.00 above but in skirting or in dado including 10 mm thick rendering CM 1:4 complete all as specified and directed.

M&L for non skid matt finish coloured ceramic tiles7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick CM 1:6 screed bed for laying floor finishes all as specifed and directed.

M&L for Glazed ceramic colour tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchincluding 10 mm thick rendering CM 1:4 complete all as specified and directed.

M&L for coloured 300x600x7 to 8mm thick digital ceramic tiles on vertical surfaces such as skirting,dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick cement mortar backing coat in CM 1:4 etc, complete all as specified and directed.

M&L 15-18 mm thick premiium quality Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. over screed bed or bedding layer of morar 15 mm in cement mortar 1:4set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as in cills, jambs etc, including moulding/rounding to edges of the slab and also including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

S&F GI tubing medium grade with all fitting and fixed complete to walls and ceiling or laid in trenches including taking up or down steel water tubing and connections complete all as specified and as directed complete.

Supplying and laying 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings (including provision of special fittings i.e brass elbow brass tee ,male brass thread adoptor ,female brass thread adaptor etc required for bib tap,stop cock with CPVC pipe concealed in walls/ceiling or laying in floors etc also including cutting chases grooves and making good the same in CM 1:3 after fixing of pipes /fittings including taking up or down steel water tubing and connections complete all as specified and as directed complete.complete all as specified and as directed

S&F cast iron Nahani trap 100mm dia out let including grating connecting jointing to waste pipe with lead jointing and taking out existing unserviceable traps by hacking out concrete joints and making good of surfaces complete all as specified and as directed .

S&F PVC connections 15mm size with PTMT nuts of length 600mm.

S&F in repair Tubular towel rail, D type, 60cm long between flanges fixed with and including chromium plated brass screws and wooden/plastic cleats Make :Jaquar code No AKP-35711PS or equavalent.

S&F in repair Towel rack with Square flanges fixed with and including chromium plated brass screws and wooden/plastic cleats Make :Jaquar code No AKP-35721PS or equavalent.

S&F in repair Soap dispenser with glass bottle, flanges fixed with and including chromium plated brass screws and wooden/plastic cleats Make :Jaquar code No AKP-35735PS or equavalent.

S&F in repair Toilet paper holder with stainless steel flap, flanges fixed with and including chromium plated brass screws and wooden/plastic cleats Make :Jaquar code No AKP-35753 PS or equavalent.

S&F in repair Glass shelf 600 mm long, flanges fixed with and including chromium plated brass screws and wooden/plastic cleats Make :Jaquar code No ACN -1171 N or equavalent.

S&F in repair Corner Glass shelf with bracket, flanges fixed with and including chromium plated brass screws and wooden/plastic cleats Make :Jaquar code No ACN -1173 N or equavalent.

S&F in repair Soap dish holder, flanges fixed with and including chromium plated brass screws and wooden/plastic cleats Make :Jaquar code No ACN -1131 N or equavalent.

S&F in repairs two way Bib cock long body with wall flange fitted by 15mm bore complete all as specified and as directed.Make :Jaquar code No COP -041PM. or equavalent.

S&F in repairs 15 mm bore stop cock cast copper alloy with crutch or for brass chromium plated with fancy shank and cup fancy type complete all as specfied and drecetd.Jaquar code No COP -057PM. or equavalent.

S&F in repairs 15 mm dia bib taps,fancy type chromium plated cast copper alloy with crutch , screwed down screwed for iron or for brass ferrule complete all as specfied and drecetd.

S&F in repairs 15 mm dia bib taps two way cock , cast copper alloy with crutch , screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated Make Jaquar or equivalent make as approved complete all as specfied and drecetd

S&F Bib cock Auto closing system with built in control cock with wall flange fitted by 15mm bore complete all as specified and as directed Make :Jaquar code No PRS -043 or equavalent.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position Make Jaquar or equivalent make as approved complete all as specfied and drecetd complete in all respect as specified.

S&F in repairs 15 mm bore stop cock cast copper alloy with crutch or for brass chromium plated with fancy shank and cup(concealed type) complete all as specfied and drecetd. Make Jaquar or equivalent make as approved complete all as specfied and drecetd

S&F in repairs Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.

S&F in repairs Pedestal pan Couple closet Cat NO LYS-WHT-0204BS and soft seat cover cat No ZPS-WHT_1027UF including removing old wc complete all as specified and as directed Make :Jaquar or equavalent.

S&F vitreous china, table top wash hand basin oval shape size( 420x420mm x135 mm) cat No : ARS-WHT-0538 Make of JAQUAR or equavalent. fixed on granite counter top slab including brass chromium plated full threaded waste coupling with grating 32mm dia pvc waste pipe complete all as specified and directed. (Note: Granite slab, RCC plat form, brick wall support etc shall be measured and paid separately)

S&F in repairs 15 mm Bore dia Pillar taps fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specfied and drecetd.cat No : COP -CHR-021PM Make of JAQUAR or equavalent.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame/aluminium frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

Supply only stainless steel wire cloth 0.36mm mm nominal dial of wire and average width or aperature 1.40mm for fixing to wooden door/ window shutters in any position with new beads/ steel section as required for securing including dismantling of old jalli and painting to match with existing complete all as specified and as directed.

supply and fixing Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane 4 mm thick quality fixing to wooden door/aluminium window shutters in any position with new beads/ steel section as required for securing including dismantling of old jalli and painting to match with existing complete all as specified and as directed.

S & F 6mm thick glass mirror of approved make with mirror screws all sides finished bevelled edging with 20-25mm tappered size completed all as specified and directed.

S& F in repairs mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

S& F in repairs Brackets for item above complete all as specified and directed.

Dismantling cast iron or reinforced concrete drain pipes , water pipes (150 mm dia ) including all fittings, balance under credit ( measure overall as fixed along the centre line over fitting and accessories ) all as specified and directed.

M&L for 150 mm Internal diameter of pipe Sail-glazed stoneware drain pipes laid in trenches and jointed as specified

S&F 150 mm Bends and taper bends as specified

S&F 150 mm single Y junction as specified

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including Scaffolding or Jhula all complete including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) all as specified and directed.

S & F for 110mm dia PVC bends complete all as specified and directed

S &F PVC (SWR) junction single(single T), 110 mm bore, equal or unequal

M&L for 18/19 mm thick marine ply bonded with undiluted Phenol Formaldehyde resin, Boiled Water Proof, Specific gravity 0.80 (minimum), moisture content 8-12%, water absorption <5%, provided with and including 1mm thick plastic laminated sheet on both sides of plywood (plastic laminated sheet shall be with decorative choice lamination on one side and other side balancing) (Make of ply : Anchor, Kitply, Century Ply, Green Ply) as in kitchen cabinets, cub board, shelves etc, Fixed with screws to frame work, complete all as specified and directed, Note: Payment for glass panels shall be made for separatly as "supply only".

S&F D-handle of size 96mm long of stainless steel with matt or gloss finish for modular kitchen shutters, complete all as specified and directed.

S & F Stainless Steel railing, baulster, hand rail, pole with 304 grade with any dia, including making ornamental pattern, cutting hole on any surfaces and fixing with cement mortar and araldite , complete all as specifed and directed as Engr in charge. ( design , dia, bent,shape,approval by GE)

Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) n.exceeding 1.5 Sqm each including complete all as specified and directed.

Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) exceeding 1.5 Sqm but not exc 4 Sqm each including complete all as specified and directed.

Supply & Fixing 2nd class hard wood plain ,solid straight chowkats and frames of wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

S&F Glazed and Skelton shutters, 30 mm thick of Second class hard wood open rebated and prepared to receive glass, gauge etc without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a) (Door Shutters) complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant as per specifications drawing as directed by the Engineer - in -charge . Material test certificate and authentication should be compulsory provided by the manufacturing company.and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: 2 mm thk ACP sheet fixed in one side of shutter and stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed

S&F aluminum anodised barrel tower bolts of extruded section of size 150 mm length

S&F 150 mm extruded aluminum alloy handles, fabricated type anodised

S&F aluminum anodised sliding door, bolts with hasp and staple ( bolt type ) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy, length of bolts 300 mm.

S&F bands, straps , supports or stays for rain water, ventilating pipes including bolts, clamps, hold fasts etc and similar small articles to Fe-290 Gde-E-165 all as specified & directed.

M&L PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in hold fast, bed plate etc including necessary form work complete all as specified and as directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge.

S & F 20 mm dia Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Demolition of brick/cement concrete (unreinforced) / pcc tiles from existing roof/terrace etc and also removing/taking down of existing water proofing treatment of any thickness in any position including cleaning the surfaces of roof etc with wire brush complete and removing the retreived debris out side MD land, all as specified and directed.

M&L for PCC (1:2:4 ) type B-1 using 20 mm graded crushed stone aggregate as in levelling courses over RCC roof surface to achieve required slope including rounded or chamfered edges mixed with water proofing compound @ 3% by weight of cement and finishing surface even and smooth using extra cement etc complete all as specified (NOTE :- WPC shall be measured and paid separately as supply only )

M&L for screed bed 10 mm thick on brick work or concrete surfaces finished even and fair in cement plaster 1:4, complete all as specified and as directed with mixing water proofing compound.Note:( wpc shall be measured and paid separately)

M & L for 3 mm thk APP modified roof treatment over existing roof slab etc to be executed through approved authorised applicator of the membrane manufacturer with the following specifications complete all as specified and directed:- (a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying APP modified water proofing membrane reinforced with non woven polyester fibre weight not less than 160gm/Sqcm using butane torch by torch application with 10cm side lap and 15cm end lap. (c) Physical properties of membrane shall be as under:- (i) Membrane weight not less than 3.50 Kg/Sqm. (ii) Non woven polyester weight not less than 160gm /sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650N/Sqcm and transverse not less than 450 N/Sqcm (v) Tear strength-longitudinal not less than 300 N & transverse not less than 250 N. (vi) Elongation : > 20% in both directions. (vii) Impermeability/water tightness at 2 Kgf/cm2. (viii) Water absorption - Not more than 1% on mass within 24 hours. (ix) Cold flexibility - Minimum (-) 20C. (x) Dimentional stability % change = Maximum 1%. (xi) thickness of memberane shall not less than 3 mm. Note bitumen primer will be meaasured seperately

Bitumen primer for use inwaterproofing and damp-proofing treatments

M & L for point wiring with PVC insulated FRLS unsheathed 1100 Volts grade single core multistranded copper conductor cable 1.5 Sqmm drawn in and including PVC concealed conduit of suitable size of wall/ RCC slab/ ceiling/ colunms/ beams etc with all accessories, fittings, PVC junction boxes etc, for mounting modular switches, sockets, fan regulators etc with all accessories, fittings, PVC junction boxes etc, with suitabe sunk pressed steel boxes for modular fittings not less than 1.6 mm thick, including Modular cover plate of suitable size etc with necessary fixing accessories and earth continuity conductor cable of 1.5 Sqmm size connected to common earth and earth dolly including 1.6 mm thick pressed steel terminal boxes concealed in wall mounting switches / sockets / fan regulators fixed with Cadmium plated machine screws all as specified for one light / fan / bell point controlled by one switch. Make of wire : KEI/ BENLO/ Polycab/ Anchor(Panasonic) Make of conduit : Pressfit/ Diamond/ Sudhakar/ Plasto

-Ditto- all as per item No 91.00 here-in-before but for one 5A 2pin/3pin socket out let multipurpose on the same board with other switches. Make : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree)

-Ditto- all as per item No 91.00 here-in-before but for one 5A 2pin/3pin switch socket out let multipurpose on independent Board. Make : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree)

All as per item No. 91.00 above but wiring complete with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board Make : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree)

S&F modular type 6A one way SP switch 1 module confirming to IS: 3854-1997 with fingure proof terminal complete all as specified and directed. Make : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree)

S&F modular type 2/3 pin combined shuttered type 6 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed. Make : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree)

S&F modular type 2/3 pin combined shuttered typr 16 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed. Make : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree)

S&F modular type 16 A one way SP switch 1 module confirming to IS: 3854-1997 with finguer proof terminal complete all as specified and directed. Make : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree)

S&F modular type 120W step fan regulator of 2 module size conformng to IS: 11037-1984 complete all as specified and directed. Make : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree)

Supply & Fix Modular Bell push flush type 6 Amp, 1 module, 230 Volts complete all as specified and directed.

Supply and fix bell ding dong AC 230 V single pole. complete all as specified and directed. Make: Anchor/ Maru/ Leader/ Havells

S & F Modular Blank plate 1 module suitable for Modular switch boards all as specified and as directed Make : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree)

S & F Modular cover plate 8 modules Make : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree)

S & F Modular cover plate 3 modules Make : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree)

S & F Modular cover plate 2 modules Make : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree)

S & F Modular cover plate 1 modules Make : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree)

S&F ceiling rose in repairs three terminal, 230 Volts PVC / Polycarbonate body, complete all as specified and directed.

Supply and fix surface/wall mountain, indoor decorative type LED luminaire extruded alluminium batten in anodized finished with opal diffuser, with IP 20 protection of capacity 18/20W having luminious efficiency not less than 100 lumen/watt,CCT 6500K4 feet long operating on 230V, 50 Hz, AC supply including fixing and mountaining on PVC blocks 02 Nos & connecting with 1.5 sqmm, 3 core PVC insulated copper conductor and suitable nuts bolts & washers complete all as specified and directed”. Make : Bajaj, Model No : BCLAV20W-LEDP, Halonix:-: HLB-03-18-CW-AL-SQ-HL2, Jaquar-: LGLZU1X022XC, Wipro :- Note : The lowest tenderer shall furnish 3 years warranty certificate from OEM for luminiries including LM79 & LM80 test certificate from NABL certified laboratory.

Supply and fixing in repairs LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including provision with three core flexible copper conductor cable of suitable size and PVC square blocks complete all as specified and directed Make: Bajaj (Model No-BCLSV-10W-WH), Jaquar (Model No- LGLZ01X010XC), Wipro, Halonix (Model No-HLB-07-10-CW-IP) Note : The lowest tenderer shall furnish 3 years warranty certificate from OEM for luminiries including LM79 & LM80 test certificate from NABL certified laboratory.

Taking down old unserviceable ceiling fan 1200 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades and transporting to workshop to undertake repairs by rewinding of burnt out winding using suitable gauge copper wire, replalcement of worn out capacitor 2.5 mfd - 01 No., PVC canopy - 02 No's and bearing including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site complete all as directed.

Supply and fix exhaust fan in repairs, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers complete all as specified and directed. Make :- ALMONARD / ORIENT

S&F single pole and neutral enclosure with a two pin and earth and metal clad plug socket complete with one single pole MCB 20 Amp 240 Volts complete all as specified including concealing in wall and directed including Taking down complete main switches/DBs with enclosure and its components of any size and capacity ,etc complete all as specified and directed. Make :- LEGRAND/ SCHEINDER/ L&T

S & F MCB DB, 12 way, SPN, double door, 240 Volts and including cutting chases in wall, concealing DB in wall, making good the disturbed surfaces and making all connections complete all as specified and directed. Note: Quoted rate shall be deemed to include for provision of copper bus bar of 200 Amps rating. Make: C&S/ L&T/ Schnieder

S & F MCB DB, 4 way, SPN, double door, 240 Volts and including cutting chases in wall, concealing DB in wall, making good the disturbed surfaces and making all connections complete all as specified and directed. Note: Quoted rate shall be deemed to include for provision of copper bus bar of 200 Amps rating. Make: C&S/ L&T/ Schnieder

S & F MCB SPN 40 Amps, 240 / 415 Volts, 50 Hz, 10 KA Breaking capacity 'C' series complete Make: C&S/ L&T/ Schnieder

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW, 230V / 50Hz, Temperature Range 25 to 70 degree celcius & working pressure 0.8 Bar capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed. Make : AO SMITH / RACOLD / BAJAJ / JAQUAR Note : Contractor will give the warranty - 5 Years of Tank, 2 Years of Heating Element and 2 Years on Other Parts on Geyser supplied.

S & F MCB SP 5 to 32 Amps, 240 / 415 Volts, 50 Hz, 10 KA Breaking capacity 'C' series complete Make: C&S/ L&T/ Schnieder

M&L for sub main wiring in repairs with two single core 6.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through conduit with and including PVC insulated 6.0 Sqm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly including taking down old unserviceable submain wiring complete all as specified and as directed Note : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit. Make of wire: Polycab/ KEI/ BENLO Make of conduit: Precision/ Pressfit/ Anchor

M&L for sub main wiring in repairs with two single core 1.5 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through nconduit with and including PVC insulated 1.5 Sqm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly including taking down old unserviceable submain wiring complete all as specified and as directed Note : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit. Make of wire: Polycab/ KEI/ BENLO Make of conduit: Precision/ Pressfit/ Anchor

M&L for sub main wiring in repairs with two single core 4.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through conduit with and including PVC insulated 4.0 Sqm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly including taking down old unserviceable submain wiring complete all as specified and as directed Note : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit. Make of wire: Polycab/ KEI/ BENLO Make of conduit: Precision/ Pressfit/ Anchor

S&F in repair/replacement of building Security light fitting 30/35 Watt made up of pressure die cast alluminium body with mid power LED as lighting sources and PC cover having Top opening separate driver compartment with IP66 protection and impact resistance of IK07 including fixing arrangements and taking down old rusted bracket fittings complete all as per directed by Engr- in – charge. Make: Bajaj/ Wipro/ Jaquar

S& F in repairs of GI steel tubing medium grade 40 mm dia and length up to 1.5 meter bent to shape of offset angle upto 45degree for fixing of security /street light fittings including MS clamps made of 32mm x5mm flat iron, nuts , bolts, etc all as directed by Engineer in charge

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70.0 sq mm 3.5 core Make : Polycab/ KEI/ Grandley

Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed.

Removing excavated materials (soils) not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

M & L for sand cushioning by spreading in trenches crushed sand by gently by punning down manually as in cable protection all as specified and as directed by Engineer -in-charge.

Supply and laying un-reinforced precast concrete cable cover class LV, type-I, flat size 250 mm x 150 mm x 40 mm laid in trenches all as specified. Make: Mehtab tiles/ National

M & L Cutting of existing GI pipe of size 50x25 mm dia by excavation the trenches and insertion of GI tee of size 50mm x 50mm x 4mm dia including ferreling and all GI accessories for tapping of water supply mainscomplete including returning filling and making good of disturbed surfaces and testing of complete all as specified and directed by Engg in Charge.

Supply, lay/fix, connect and testing steel water tubing of 25 mm bore, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings and fixtures, clamps and fixed to wall/ceiling or laid in trenches/floors including taking down old wornout GI pipe complete all as specified and directed.

M&L for cutting existing road/hard and dence soil not exc 45x50 cm in wide & depth getting out excaveted materials for laying GI tube; returning filling & well rammin watering finish surface 10 cm from top using PCC 1:3:6 not less than 4 inch thick; including removal of surplas soil all as per directed.

Supply and fix LED GLAZE 10 W cool white in repair of appropreate size cat no. LGLZ01X010XC of Jaquar complete all as specified and directed. Make: Jaquar or equivalent make

Supply and fix light opal glass with chrome finish wall lamp in repair of appropreate size cat no. JHL-CHR-MB160275531B of Jaquar complete all as specified and directed. Make: Jaquar or equivalent make

Supply and fix Estus swivel 36*6W warm white in repair of appropreate size cat no. JQM-WHTLETS36R006XW of Jaquar complete all as specified and directed. Make: Jaquar or equivalent make

M&L Earthing complete with galvanised iron strip 32X6mm earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion Note: (1). 7.5 RM GI strip in deemed to be included in quoted rates beyond 7.5 RM strip shall be measured and paid separately. (2) Rate quoted by the tenderer is deemed to include salt & Charcoal upto & above 450 mm top of GI earth plate. Note : A sum of Rs 24,118.00 towards sch of credit shall be deducted to arrive the contract sum.

AM ENTERPRISES (BID ID -3151571)

Atharva Enterprises (BID ID -3156921)

M/s Shreeji Construction Co (BID ID -3153340)

M/s Mukesh Engineers (BID ID -3152876)

M/S KHUSHI ENTERPRISES (BID ID -3155652)

Parmatma Enterprises (BID ID -3152792)

RAJU AND COMPANY (BID ID -3151812)