CONSTRUCTION OF SECURITY WALL AT KHETRAPAL LINE IN MIRAN SAHIB MIL STN UNDER PARA 35 OF DWP 2020

Amount

Note :-Execution of work vide Srl item No 1 to 23 of BOQ shall strictly be followed as per Drg No CEPZ/STD/181/2018 sheet 1/1 for security wall purose However cost of any of the minor items shown in Drg No CEPZ/STD/181/2018 but leftout indvertantly shall be deemed to be included in the quoted rates of other BOQ items.

Excavation in over areas by mechanical means (Hydraulic excavator) means (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5m, in any type of soil complete all as specified and as directed.

Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and as directed.

Demolition of brickwork built in cement mortar complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and as directed.

Dismantling of steel barbed wire, any type complete all as specified and as directed.

Cement concrete M-10 (Nominal mix) using 40 mm graded crushed stone aggregates in foundation filling and mass concrete complete all as specified and as directed.

Form work to sides of concrete foundation footing base of columns and raft beams sides and soffits (if any) of foundation and plinth beams and similar wk vertical or to batter for rough finished surfaces complete all as specified and as directed.

Form work to sides of pillars, posts, struts, pier, columns square, rectangular or polygonal rough finished surface of concrete complete all as specified and as directed.

Form work to sides and soffits of floor or roof beams, beam haunching, lintel etc rough finished surfaces of concrete flats complete all as specified and as directed.

RCC M-25 design mix using 20mm graded crushed stone aggregate as in fdn, including raft, fooling fdn beams, plinth beams bases for columns and mass concrete complete all as specified and as directed.

RCC M-25 design mix using 20mm graded crushed stone aggregate as in beams, cantilivers, bressummers, lintel over 1.5m span complete all as specified and as directed.

RCC M-25 design mix as using 20mm graded crushed stone aggregate in columns , pillars, piers, posts and struts etc complete all as specified and as directed.

TMT bars (Fe 500),10 mm dia and over in reinforcement cut to length, bent to shape required incl bending spirally cranking, hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

TMT bars (Fe 500), 5mm dia and over upto incl 10mm dia in stirrups bending spirally or hooping for columns, hooking ends and binding with mild sleet wire not less than 0.90mm dia complete all as specified and as directed.

Brick work with fly ash bricks having crushing strength not less than 100 Kg/Sqm, straight or curved on plan exceeding 6 m mean radius with old size bricks built in cement mortar 1 : 4 complete all as specified and as directed.

Rendering 15mm thick on fair faces brick surfaces in cement mortar 1 : 4 finished even and smooth without using extra cement complete all as specified and as directed.

All as per description Srl item No 16 here-in-before but other than fair face of brick work complete all as specified and as directed.

Applying two coats of cement based paint over concrete or newly plastered suraces incl preparing new plastered surfaces complete all as specified and as directed.

Mild steel work fixed independently w/o connecting plate as in swan neck fencing of Fe-410-w(gde E-250A complete all as specified and as directed.

Galvanised 2 strand steel barbed wire 2.24mm dia, barbed with 2.00 mm dia barbs at 75mm spacing, straining and fixing to any standard rails and straining bolts incl securing or typing at crossing with and provisions of galvanised mild steel wire stapples or steel pins etc complete all as specified and as directed.

Concetrina coil securing or tying including provn of MS wire stapples or steel pins etc complete all as specified and as directed.

Framed work such as grills, gratings etc with end of bars shouldered or riveted or forged into spikes, framed guard bars confirming to Fe-290, Gde-E-165 complete all as specified and as directed.

Painting with synthetic enamel paint in two coats over a coat of red oxide primer including preparing the new untreated steel surfaces of any description over 10cm in width or girth complete all as specified and as directed.

M/S Jasbir Singh (BID ID -3174436)

M/S MOHAN LAL GUPTA (BID ID -3176272)

bamral builder (BID ID -3176085)

R R CONSTRUCTION (BID ID -3173255)

JCC ENGINEERS PRIVATE LIMITED (BID ID -3176223)

M/s Ravinder Kapoor Engineers and Builders (BID ID -3176204)

DES RAJ NAGPAL CONTRACTORS PVT.LTD (BID ID -3176420)