Construction of New District Police Office building with development works at Kallakurichi for the newly formed Kallakurichi District.

Earth work excavation for foundation in all soils (including refilling) a) 0 to 2 mt.

b) 2 to 3 mt.

Earth work excavation for Open foundation in soft disintergrated rock (Including refilling) a) 0 to 2 mt.

b) 2 to 3 mt.

Earth work excavation for Open foundation (excluding refilling) a) 0 to 2 mt.

b) 2 to 3 mt.

c) 3 to 4 mt.

Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a) 0 to 2 mt.

Providing Pre-Constructional Antitermite treatment

Supplying and filling in foundation and basement with filling crushed stone sand

Supplying and filling with 40mm size Hard broken stone jelly in foundation and basement

Supplying and filling with 20mm size Hard broken stone jelly in foundation and basement

Filling in foundation and basement and other similar works with Excavated earth

Supply and filling in foundation and basement with gravel

Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40 mm gauge hard broken stone jelly

Plain cement concrete 1:2:4 (One of cement two of crushed stone sand and four of Hard Broken Stone jelly) (including Mortar Plasticizer (Liquid) at 200ml per bag) using 20mm gauge hard broken stone jelly

Plain cement concrete 1:8:16 (One of cement, eight of crushed stone sand and sixteen of broken brick jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and other similar works using 20mm gauge broken Brick Jelly

Plain cement concrete 1:3:6 (one of cement, three of crushed stone sand and six of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and other similar works using 20mm gauge hard broken stone jelly

Plain cement concrete 1:4:8 (one of cement, four of crushed stone sand and eight of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and other similar works using 40mm gauge hard broken stone jelly

Supplying and fixing of precast cement concrete slab for cupboard / ward robes, shelves, cover slab for chambers baffle walls etc., and other similar works 20mm thick using standardised concrete mix M20 I. 20mm thick a) In Stilt / Ground Floor

b) In First Floor

c) In Second Floor

d) In Third Floor

Supplying and fixing of precast cement concrete slab for cupboard/ ward robes, shelves, cover slab for chambers, baffle walls etc., and other similar works 40mm thick using standardised concrete mix M20 II. 40mm thick a) In Foundation and Basement

b) In Stilt / Ground Floor

c) In First Floor

Supplying and fixing of precast cement concrete slab for cupboard/ ward robes, shelves, cover slab for chambers, baffle walls etc., and other similar works 40mm thick using standardised concrete mix M25 II. 40mm thick a) In Foundation and Basement

Precast cement concrete Jally ventilator using standardised concrete mix M20 without vibrating charges 50mm thick a) In Ground Floor

Providing and laying in position, Standardised Concrete Mix M-25 Grade (Using crushed stone sand) a) In Foundation and Basement

b) In Stilt / Ground Floor

c) In First Floor

d) In Second Floor

e) In Third Floor

f) In Fourth Floor

g) In Fifth Floor

Providing Rain water harvesting pit of 1.0m dia 0.60m depth and filling with CS sand and stone jelly of 40mm size and by augering 300mm dia bore pits to a required depth with stone jelly of 40mm size materials and perforated precast cover slab (M20) etc., all complete Providing Pit

Augering 30cm dia

Supplying and fixing of fibre mixed precast slab of 50mm thick of all required shapes made in cement concrete 1:3:6 (one of cement,three of crushed stone sand and six of 20mm hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) with secondary reinforcement fibre of approved quality at 0.25% by weight of cement (125gm of fibre for 1 bag i.e., 50Kg of cement) used including cost of all materials, moulding, curing, transportation, laying, pointing etc., for approach road,pavement slab and other similar works etc., complete as per the relevant standard specifications and as directed by the departmental officers.

Brick work in cement mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in foundation and basement

Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a) In Stilt / Ground Floor

b) In First Floor

c) In Second Floor

d) In Third Floor

e) In Fourth Floor

f) In Fifth Floor

Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a) In Foundation and Basement

b) In Stilt / Ground Floor

c) In First Floor

d) In Second Floor

e) In Third Floor

Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a) In Stilt / Ground Floor

b) In First Floor

c) In Second Floor

d) In Third Floor

Supplying and fixing of 20mm thick Bituminous Expansion joint filler Pad

Flooring with a bed of CC 1:5:10 (one of cement, five of crushed stone sand and ten of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) using 40mm size hard broken stone jelly

Plastering the top of flooring in CM 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring (No Sand)

Weathering Course with concrete broken brick jelly 20mm gauge

Terrace floor with one course of Thermatec Tiles of approved superior quality of size 300x300x19mm thick

Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag,) 12mm thick mixed with Water proofing compound at 2%

Supplying and fixing of Colour glazed tiles (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works (Best approved quality, colour and shade shall be got approved from the Executive Engineer before using) over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

Providing double nosing to the edges of granite slab of 20mm thick including labour, power consumption, tools & plants required, true to horizontal etc., for kitchen platform in all floors and as directed by the departmental officers.

Supplying and fixing of Synthetic Grey colour Granite Tiles (superfine polished with machine cut edges) of required sizes of 10 mm thick for wall cladding (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10 mm thick

Supplying and fixing of Stain free Nano polish Vitrified Tiles of size (600x600x8mm) for flooring and other similar works in cement mortar 1:3 (one of cement and three of crushed stone sand, including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

Supply and laying superior variety Concrete Designer tiles for flooring in CM 1:3 (One of Cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

Supplying and laying of Ruby Red Granite slabs (superfine polished with machine cut edges) of size 4'-0"x 2'-0" of 18 to 20 mm thick for flooring (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:3 (One of cement and three of crushed stone sand) 20mm thick including Cost of Mortar Plasticizer (Liquid) at 200ml per bag

Supplying and fixing of (superfine polished with machine cut edges) of sizes 4’x2’ of granite slab (Jet Black) slab having 18-20mm thick (sample should be got approved by the executive engineer before use) laid over in cm 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm tk a. In Ground Floor

supplying and laying porcellor tiles of size 600x600x10mm thick for flooring and other similar works (best approved quality, colour and shade shall be got approved from executive engineer before using) over cement mortor 1:3 (one of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

Supplying and fixing of acid proof ceramic tiles for flooring and other similar works (best approved quality, colour and shade shall be got approved from the executive engineer before using) over cement mortor 1:3 (one of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag)) 20mm thick including fixing in position, cutting the tiles to the required size wherever necessary, pointing the joints with grout (tile joint filler), curing, finishing etc., all complete.

Providing Form work and centering for reinforced cement concrete works a) For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b) Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

c) For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.

d) For Vertical wall

e) For Circular Column

f) For Curved surface

Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

Plastering with CM 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

Special ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

Plastering in cm 1:3 (one of cement and three of crushed stone sand (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm tk. mixed with water proof compound at 2%

Plastering in CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick for border finish in all floors a) 150mm wide border

b) 75mm wide border

c) 50mm wide border

Stucco Plastering 12mm thick using hard broken stone chips of size 10mm and below using 86.50 kgs of cement and 0.15 m³ blue metal chips for every 10m² area over the existing plastered surface including curing etc., complete complying with relevant standard specifications and as directed by the departmental officers.

White washing three coats using clean shell lime slaked

Painting the new wood work with two coats of approved first class synthetic enamel ready mixed paint in addition to one coat of Primer

Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats

Providing wooden (melamine) polish for new wood

Supplying and applying of full putty one coat with aproved make wall putty for smooth finishing the new cement plastered walls

Painting the New walls with two coats of approved best ready mixed plastic emulsion paint for inner walls

Painting the New walls with two coats of approved best ready mixed exterior emulsion paint outer walls in addition to one coat of approved primer coat

Supplying and fixing of Teak wood wrought and put up a) Teak wood over 2m and below 3m length

b) Teak wood below 2 m length

Supply and fixing of best approved superior variety magnetic door catches

Supplying of Mild Steel hold fasts horizontally twisted of size 230x40x4mm

Supply and fixing of UPVC (Un plasticized polyvinyl chloride) Louvered ventilators

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open)

Supplying and fixing Mild Steel grills as per the design approved

Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry)

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc., ROLLING SHUTTERS (WITH ISI MONOGRAM) Manually Operated (up to 8 sqm. Area)

Providing T.W.double leaf shutters for cupboard/ward robes with 9mm thick phenol bonded BWR grade plywood

Providing teakwood glazed french window shutters and 5.5mm thick ground or frosted glass for panels including labour charges and cost of furniture fittings as per schedule ‘E and directed by the departmental officers. a) 2100 x 2400mm

TW Panelled door shutter with Aluminium fittings (Double leaf) a. 1500mm x 2400mm (with Brass Screws Only)

TW Panelled door shutter with brass fittings (Double leaf) a. 2000mm x 2400mm.

Supplying and fixing of solid core flush door shutter of thickness 35mm a) Door size 900mm x 2100mm (Single Leaf)

Supplying and fixing of solid core flush door shutter of thickness 35mm a) Door size 900mm x 2400mm (Single Leaf)

b) Door size 1000mm x 2400mm (Single Leaf)

c) Door size 1200mm x 2400mm (Single Leaf)

Supplying and fixing of solid core flush door shutter of thickness 35mm a) Door size 1500mm x 2400mm (Double Leaf)

Providing Aluminium partition wall top with 1/3 5.5mm thick plain glass and bottom with 2/3 Novapan sheet 12mm tk. The outer frame top and bottom using rectangular box section No.9221 of size 101.50x44.450x2.0mm at weight of 1.975 kg/m and section vertical as well as horizontal using rectangular box section No.9222 of size 63.50x38.10x2.0mm at weight of 1.174 kg/m with accessories and furniture fittings including cost of materials required brass screws, plugs and labour and power consumption charges required for fabrication

Supplying and fixing of 15 microns Anodised Aluminium Door made up of frame section of 50.0x 44.50 x 1.90 mm for top, middle and vertical end for bottom 101.60 x 44.45 x 2.00 mm with rubber beeding gasket and butterfly handle and locking arrangements with plain glass of 5.5mm thick,bottom with with 9 mm thick OSL Duro tuff sheet of approved ISI quality including cost of materials, Rubber beedings, locking arrangements, power supply, screws, TW plug, door stopper, hire charges for tools and plants and labour charges etc., all complete and as directed by the departmental officers. (The brand, quality & shade and other fittings should be got approved from the Executive Engineer before use.) 1000 x 2100mm (Double leaf Door)

Providing wall panelling using 12mm BWR plywood over 2"x1" aluminium channnel to be fixed on wall and supply and laying of 1mm mica sheet in between providing 50mm glass wool for acoustic purpose including cost and labour for fixing aluminium channel, 12mm BWR plywood, 1mm mica sheet with PVC clamp, TW plugs and screws and SR bond for pasting as per specification etc., all complete and as directed by the departmental officers. (The brand and quality shall be got approved from user department and Executive Engineer before supply)

providing and fixing of aluminium composite panel (acp) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 kg/sq.m and fabricated fixed at all level elevation and heights. the extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of bsh 9 confirming t is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc.

Supply and Fixing of 25mm (+/- 1mm) thick WPC Decora Door which is extruded as a single core door with Lead-Free compound. The door is designed homogeneously by Smooth Routing and 3D embossed grains on one side. The other side of the door shutter shall be plain matt finish. The door must be completely made by machine, without any post-production fabrication. The Solid WPC board shall have minimum Bulk Density 650 KG/ Cub.Mt. The door is suggested to be hinged to the WPC frame of size 75 x 50mm with minimum of 5 inch butt hinges of SS including cost of WPC door frame, shutter, SS cylindrical lock and door closer and labour charges etc., complete complying with standard specifications and as directed by department officers. (The brand should be got approved from the Executive Engineer before use.)

Supplying and fixing of pre-cast kerb stone of size 450x300x150mm made in CC 1:3:6 (One of cement, three of crushed stone sand and six of hard broken stone jelly) using 20mm size hard broken stone jelly including Cost of Mortar Plasticizer (Liquid) at 200ml per bag, the cost of Kerb stone moulding, laying, curing, transporting, pointing and as directed by the departmental officers..

Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe

Supplying and fixing of half turn C.P Long body Tap of 15mm dia

Supplying and fixing of half turn C.P short body Tap of 15mm dia

Supply & fixing of CI Steps (not less then 5 Kg each)

Supplying and fixing of C.I man hole cover with locking arrangements of approved quality and brand of size 0.6m x 0.6m (50Kg) as per standard specifications including cost of material, labour charges for fixing etc., all complete and as directed by the departmental officers.

Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness a) 32mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

b) 25mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

20mm dia PVC water supply ASTM pipe (fully consealed in walls)

Supplying and fixing of 32mm dia PVC Tee with end cap

Supplying and fixing of 50mm dia MS pipe with 3.6mm thick including cost of all materials and all labour charges etc., all complete.

Supplying and fixing of porcelin wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories

Supplying and fixing of approved brand Porcelain Flat Back urinal superior variety including cost of Urinal lead pipe, waste pipe, 15mm wheel valve, TW plug and lobour for fixing etc., all complete as directed by the departmental officers (Thebrand and quality shall got approved from the Executive Engineer before use)

Supplying and fixing of PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl a) 110mm dia PVC SWR pipe of 3m with required PVC cowl & PVC specials etc.,

Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick brick jelly concrete in CC 1:8:16 (one of cement, eight of crushed stone sand and sixteen of broken brick jelly) using 40mm size brick jelly and brick masonry wall 114 mm thick using chamber burnt bricks of size 9”x4-1/2”x3” (23x11.4x7.5cm) in CM 1:5 (One of cement and five of crushed stone sand ) plastered with CM 1:3 (One of cement and three of crushed stone sand) 12mm thick including Mortar Plasticizer (Liquid) at 200ml per bag etc., complete and as directed by the departmental officers.

Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum of water seal of 50mm confirm to relevant I.S. specifications with its latest amendments including resting on the bed of brick jelly concrete 1:5:10 (One of cement, five of crushed stone sand and ten of 40 mm gauge brick jelly) including Mortar Plasticizer (Liquid) at 200ml per bag etc., complete

Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag) In Ground floor.

Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag) (Other than ground floor)

Supplying and fixing EWC superior variety (white) 500mm with 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag)

Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirmed to IS 13952-1992 Type-B for waste water line

Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110 mm dia UPVC Non Pressure pipe

b) 160 mm dia UPVC Non Pressure pipe

Supplying and fixing of following dia PVC Bend a) 110mm dia PVC Bend

b) 160mm dia PVC Bend

Supplying and fixing of following dia PVC Tee a) 110mm dia PVC Tee

b) 160mm dia PVC Tee

Supplying and fixing of 20mm dia aluminium hanger rods to the required length

Supplying and fixing of Aluminium Towel Rail of 75cm long

Supplying and fixing of Aluminium plate with five pin for Coat Stand

Providing and fixing iron Chromium plated 8 gauge Picture hook

Supply and planting Avenue Trees

Supplying and fixing of Triangular shape chicken mesh Tree guard

Supplying Fabrication and Erection in position of M.S. scheme name and layout board

Supplying and fixing of Bevelled Edge Mirror of approved quality and brand of size 500x400x5.5mm shelf type

Wiring with 1.5 sqmm PVC insulated single core multistrand fire retardant flexible copper cable with ISI mark confirming to IS 694/1990 1.1 K.V. grade cable a) Light point with ceiling rose

b) Light point with bakelite battern type holder

c) Point wiring for calling bell/buzzer with push type switch with required Buzzer.

Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Fan Point

Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Stair case light point

Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 K.V. grade cable for 5 Amps 5 Pin plug Socket Point @ Switch Board Itself

Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 Amps 5 pin Plug Socket Point at Convenient Places

Supplying and fixing 15 Amps 3 pin plug type socket with switch

Earthing and Earth connections: Providing Earthing Station using pipe electrode as per IS 3043 using 2.5m of 40mm and 1.0m of 20mm B-class GI pipe including all requirements

Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook

Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator

Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor,etc., complete a) 48"" Electric fan 1200mm sweep

Supplying and fixing of 300 mm dia sweep AC exhaust fan of approved ISI quality

Supplying and fixing of 450 mm dia sweep AC exhaust fan of approved ISI quality

Supplying & fixing of LED bulbs suitable for fixing it to pendent / bakelite battern holder of best approved variety etc., all complete and as directed by the departmental officers. a) 9 watts LED bulb

b) 15 watts LED bulb

Supplying and fixing of 4'18 watts crystal LED tube light and fixing the tube light fittings

EL0045) Supplying and fixing of water tight Bulk head fitting suitable for 12W LED bulb with guard

Supplying and fixing of 25 watts LED bulb with Street light fittings arrangements

Supplying and fixing of 30 watts LED bulb with Street light fittings arrangements

Supplying and fixing of 60 watts LED bulb with Street light fittings arrangements

Supplying and fixing of 80 watts LED Focus light fittings arrangements

Supplying and fixing of spot light (MASTER LED 65-50 WA 2700 KMRI636D IND) including labour charges for fixing of light etc., all complete and as directed by the departmental officers.

Supply and fixing of Electro mechanically operated three phase Earth Leakage Circuit Breaker/Residual Current Circuit Breaker (ELCB/RCCB) Three phase

Supply and fixing of 32 amps triple pole main switch with fuse and neutral link on a suitable well varnished teak wood board including necessary interconnection and earth connection cost of all materials etc., all complete and as directed by the departmental officers.

Run of main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

Supply and Run off main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

Supply and delivery of 2 core 10 sqmm Aluminium armoured LTUG cable with ISI mark (1100V) earth strip around the gland and cable termination with crimping of terminal with lugs etc., all complete

Run of main with 4 wires of 6 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

Run of main with 4 wires of 10 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

Supply and fixing of 20A Flush type Wall Socket, 20A DP MCB and 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

Supply and fixing of 250 Watts Metal halide Flood light etc., all complete.

Supply and fixing of 100 Watts Metal halide Flood light etc., all complete.

Charges for conveying and laying of U.G.Cable of sizes 4 to 25 Sqmm of 2, 3, 3.5 and 4 core below ground level including earth work excavation and refilling and providing sand cushion, brick layer protection, etc., all complete for UG cable

Charges for conveying and fixing of UG cables of sizes 4 to 25 Sqmm of 2, 3, 3.5 and 4 core with necessary MS clamps, brass screws including cost of all materials redoing the dismantled portion, etc., all complete.

Wiring with 1.5 sqmm PVC insulated single core multistrand fire retardant flexible copper cable with ISI mark confirming to IS 694/1990 1.1 K.V. grade cable (Open Wiring) a) Light point with ceiling rose

c) Point wiring for calling bell/buzzer with push type switch with required Buzzer.

S & F of 450 x 375 x 20mm thick TW plank

Supplying and run of 8 SWG GI wire for earth connection on wall / below ground level

Supplying and fixing 3 nos of 32 amps 500 volts grade porcelain fuse unit on suitable teakwood plank varnished to be fixed on the top of pole/EB street pole with necessary clamps including cost of all materials etc., all complete.

Supplying and fixing of TV/Telephone line Socket etc., all complete.

Supplying and fixing of 20mm dia PVC pipe for TV/Telephone line

Supply and fixing of 24W LED 4000K 2 x 2 Square Type Recessed light Fitting including cost of fixing charges, tools, connetions and etc., completed as directed by the departmental officers.

Supply and fixing of horizontal type 4way triple pole neutral MCB distribution board in sheet steel enclosure double door (metal) with 40A 4pole MCB isolater as incoming and 12 Nos. 6A to 32A SP MCB as out going in flush with wall and making good of the concealed portion with earth connection. The MCB DB and MCB's should be with the ISI mark (like standard make)

Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 No 63 A 4 P MCB as incoming and 18 Nos 6A to 32A SP MCB as outgoing on wall with Earth connection only. Lower End

Supplying and fixing of 20amps single pole MCB including necessary connectins cost of all materials etc., all complete

Supplying and fixing of MS box of size 100x100x75mm including cover cost of all materials etc., all complete

Supplying and fixing of following size aluminium die casting lettering and numbering material and labour charges for firing with necesssary Scaffolding concrengs etc., all complete and as directed by the departmental officers. a) 45cm Letters (18")

Supplying and fixing of Brass Name Board with brass letter for the follwing Size including and labour for fixing etc.,all complete and as directed by the departmental officers. Board Size 18" X 4"

Supplying and fixing of tamilnadu government Emblem of 3’-3” dia having brass edging logo brass plate giving 16 dia imported sheet compound wall piece 18kg with oliek weld emergency pieces as directed by the departmental officers.

Supply and Fixing 30" Aluminium TNPHC Emblem with approved colour powder coat in finishing matt including cost of materials, necessary drilling holes packing cement mortar, supporting the letter cement base bolds and fixing charges etc, complete as directed by the departmental officers.

Supplying of 6 lever Navatal lock with 3 keys with ISI mark etc., all complete and as directed by the departmental officers.

Supply and fixing of 24"x8" plastic foam name plate with vinyl cutting letter RWH Board etc., all complete and as directed by the departmental officers.

Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level Using Hilux Board Plain Sheets (10mm thick)

Providing Cornice Work for Gyp Board False Ceiling

Supplying and fixing in position of colour galvalume sheet of 0.47mm thick as ridge piece inclusive of overlap length labour charges and nuts, bolts etc., all complete and as directed by the departmental officers. (The quality and the brand of material should be got approved by the executive engineer before use)

Design, Supply, Delivery, Installation, Testing and Commissioning of Passenger Lift (Brand: Johnson / Kone / OTIS or equivalent) of capacity 13 Persons with 3 Floors / 4 Stops / STAINLESS STEEL (1.5 mm) Car Cabin as per the following specifications Three phase EB power supply should be get from the TNEB for installation and testing etc for completion of work.

Provision for approval by CEIG for commissioning the lift

Annual Maintance Charges for lift For Second Year @ 5% of the Contract Value

Annual Maintance Charges for lift For Third Year @ 5% of the Contract Value

Annual Maintance Charges for lift For Fourth Year @ 5% of the Contract Value

Annual Maintance Charges for lift For Fifth Year @ 5% of the Contract Value

For Vision Panel add floor in Passenger Lift, Bed- Cum Passanger lift, Stretcher-cum-Passenger lift.

Supply, installation, testing and commissioning of 160 KVA Diesel Generator set with AMF panel complete with all accessories like engine, alternator, batteries with leads panel, base frame, antivibration mounts, residential silencer,400 litres fuel tank, intake & exhaust piping, fuel oil motor operated pump, other miscellaneous accessories for the total set including test trial run at load for 8 hrs at factory (inclusive of consumable oil etc) necessary control wiring for battery charger etc., annunciation etc. as per specifications give below. with AMF Panel

Supply and Insulation for the residential silencer (supply of residential silencer is included under item for DG Sets)

Supply and installation of M.S. cable adopter box (made of 14 SWG sheet steel) with suitable copper bus extension link from alternator. The adopter box shall have tinned copper bus bar of suitable size for phases and neutral with suitable holes for cable termination Necessary rubber gaskets between alternator and cable box shall be provided to avoid vibration between adopter box and alternator.

Supply and installation of MS exhaust pipe of suitable thickness with 100mm dia upto 5m from the silencer complete with necessary supports, brackets etc. The supports shall have at intervals of not more than 2.5m.

Supply and installation of MS exhaust pipe of suitable thickness with 125mm dia upto 5m from the silencer complete with necessary supports, brackets etc. The supports shall have at intervals of not more than 2.5m.

Supply and insulation of exhaust pipe thermal insulation lagging with mineral wool as per IS 3677 / 1973 reinforced with chicken mesh and cladded with aluminium sheet of 26 SWG and 50mm thick with 64 Kg/Cu. Mtr. Density.

Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe to prevent rain water entry to exhaust pipe with provision of drain plug in the system.

Preparation of necessary drawings for approval by Chief Electrical Inspector to Government / CEA, obtain approval for the same, arrange for the inspection by the Electrical Inspectorate / CEA Officials and obtain safety certificate from them for commissioning the DG set

Supply and fixing Co2 type (2Kg) fire extinguisher new seamless cylinder with powder coated finish, made out of Manganese steel with initial fills, hose, wall brackets, nuts, bolts etc as complete with ISI mark confirming to IS: 2878 as approved and instructed by the engineer in charge

Supply and installation of ABC type fire extinguishers wall mounting type , cylindrical in shape, with initial charge, discharge hose, wall brackets capacity 6 kgs.

Supply, installation, testing and commissioning of Micro Processor based Conventional 12 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230 / 24 volt SMPS unit, 2 Nos. of 12 volt, 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc.

Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers.

Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers (Make: Ravel / Equivalent)

Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers.

Supply, installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., all complete.

Supply and installation of responsible indicator for smoke deductor inside rooms etc., all complete.

SUPPLY & INSTALLATION OF AIR-CONDITIONER WITH COPPER COIL 1.5 TR Split Type AC Unit - 3 Star Rated

Supplying, fixing, commissioning of 4 KVA capacity Automatic Voltage Stabilizer with time delay relay

Supply and laying of 5/8" and 3/8" copper pipe (Extra beyond 3 metres supplied with AC unit)

Supply and fixing of MS stand for fixing outdoor unit

Supply and fixing of water drain pipe line (1” PVC Pipe)

Supply and installation of Advanced Early Streamer Emitter type Lightning arrestor made of AISI 316 Stainless Steel NFC 102 -17 standard 79 mtrs radius protection. Make :- JMV/Gravin Model 1.0

Supply and Installation of copper 18 mm Copper Rod size of 8 feet length buried in earth including excavation of earth to the depth of 8 feet and closing the pit and mixing Bentonite Chemical for fluid retention.

Supply and Installation of 50 MM dia GI mast of 5 Mtrs length with insulators, enamel painted to approved colour part buried in floor for supporting lightning arrestor spike and copper cable.

Supply and installation of 70 Sqmm copper braided/Solid sheathed cable run on the external wall from terrace to the ground floor.

Supply and Installation of CCSE 700 chairman Unit Long Microphone Built in speaker Make : Bosch Model No: CCSE-CML etc.,

Supply and Installation of Delegate unit Long flexible gooseneck, Internal Loudspeaker automatically mutes LED Indicator, Headphones output. Make: Bosch CCSE/DL-700 Series.

Supply and Installation of control Unit with following features, supplies power upto 50 Units and control up to 150 Unit Male: Bosch CCSE -CU -700 Series.

Supply and Installation Ahuja Pre - Amplifier. Model No: MMS55 (250W)

Supply and Installation of 30 W Speaker Ahuja

Supply and Installation of gooseneck, Microphone etc.,

supply and Laying of 2 core Loud Speaker cable with PVC pipe and accessories etc.

supply and Laying of 8 core 7/36 shielded conference cable with PVC pipe and accessories etc.

Supply and Installation of 8 Pin Type Socket with suitable M.S. Box And accessories.

Renewal of Supply and Installation of 1 KVA Stabilizer etc.,

Supply and Installation of wireless handheld microphone etc.,

Supply and Installation M.S Audio equipment racb etc.,

Supply and Installation LCD Projector Brightness (Lumens) : 3000 ANSI Contrast (Full On/Off) : 2700:1 Video: Yes Native Resolution (1024 x 768) Lamp Life: 7000 hour Make: BENQ/SONY/OPTOMA

Supply and Installation of 8’x6’ Motorized screen.

Supply and installation of 1 ½ x 1½ Ceiling Mounting kit. Make: Liberty

Supply and installation of 20mtrs. Length VGA cable, Power cable Audio and video cable Both end with connector.

Supplying and delivery of red soil good earth and manure (fertilizer) the soil mix to the sorted in specified locations and quantity. The red soil and good earth having deep red in colour, weed free, cold freeorganic composite, odour free including cost of materials, tools, transportation, loading and unloading charges etc., as directed by the departmental officers.

Labour charges for the levelling supplied red soil in specified location etc., all complete, and as directed by the deparmental officers.

Supplying and planting of Mexican Grass including cost of pest control, transport, labour charges etc., as directed by the departmental officers.

Supplying and planting the following in the excavated pits of size 0.30 x 0.30m filling with garden soil and planting shrubs / trees specfied below of minimum 0.35m height with necessary maintenance for the period of 1 months etc., a) Royal Palm (12' height)

b) Foxtail Palm (12' height)

c) Ficus (4' height)

d) Flowering Plants Exova

e) Specimen Plants

f) Alamanda flower Plants

Plate earthing with copper plate of size 600 x 600 x 3 mm as per the ISI specification with an earth electrode of 2.1 mtr class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Supply and run of 2 of No.8 copper wire for earth connections

Providing and fixing 25mm x 3mm copper strip on surface or in recess for connections as required

Providing and fixing 25mm x 6mm copper strip on surface or in recess for connections as required for alternator neutral

Supply and laying of XLPE, aluminium conductor 1.1KV grade armoured, MV cable of the following sizes in the existing cable trays / trenches as required generally confirming to IS: 1554/Part - I / 1970 a) 3 1/2 x 185 sqmm aluminium cable From DG panel to the common panel

Supply and fixing of brass cable gland for XLPE armoured LTUG cable for following sizes with earth connection. 3 1/2 x 185 sqmm aluminium cable

Supply and providing cable end termination of following sizes of XLPE armoured LTUG Aluminium cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete. 3 1/2 x 185 sqmm aluminium cable

Supply & fixing of Cable end Termination suitable for following PVC armoured LTUG cable etc., all complete and as directed by the departmental officers. a) 3.5 c x 120 sqmm PVC / XLPE LTUG armoured cable

b) 3.5 c x 70 sqmm PVC / XLPE LTUG armoured cable

c) 3.5 c x 25 sqmm PVC / XLPE LTUG armoured cable

d) 4 c x 16 sqmm PVC / XLPE LTUG armoured cable

e) 4 c x 10 sqmm PVC / XLPE LTUG armoured cable

f) 2 c x 10 sqmm PVC / XLPE LTUG armoured cable

Supplying and providing following LTUG cable with ISI Mark etc., all complete and as directed by the departmental officers. a) 3.5 c x 120 sq mm PVC / XLPE armoured LTUG cable

b) 3.5 c x 70 sqmm PVC / XLPE LTUG armoured cable

c) 3.5 c x 25 sqmm PVC / XLPE LTUG armoured cable

d) 4 c x 16 sqmm PVC / XLPE LTUG armoured cable

e) 4 c x 10 sqmm PVC / XLPE LTUG armoured cable

f) 2 c x 10 sqmm PVC / XLPE LTUG armoured cable

Supply & fixing of Cable gland suitable for following PVC armoured LTUG cable etc., a) 3.5 c x 120 sqmm PVC / XLPE LTUG armoured cable

b) 3.5 c x 70 sqmm PVC / XLPE LTUG armoured cable

c) 3.5 c x 25 sqmm PVC / XLPE LTUG armoured cable

d) 4 c x 16 sqmm PVC / XLPE LTUG armoured cable

d) 4 c x 10 sqmm PVC / XLPE LTUG armoured cable

e) 2 c x 10 sqmm PVC / XLPE LTUG armoured cable

Supplying, fixing and testing and commissioning of MCB in a sheet steel enclosure with earth connection on surface / recess including interconnection, painting etc., as required a) 40 A TPN 10 KA MCB

b) 10/20/32A DP 10 KA MCB

c) 63A TPN 10 KA MCB

Supply and fixing of 7 segment 6 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following on wall with earth connection only.

Towards fabrication supply instalation of CT metering box for availing the power supply from TANGEDCO

Earthing as per the ISI specification with an earth electrode of 2.1 mtr class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 40mm RCC cover / CI cover slab for the brick masonry

Supply and run of 2 of No.8 copper wire for earth connections

Supplying and laying of following GI pipe B class with ISI mark a) 80mm dia GI pipe (Above G.L)

Supplying and fixing of fancy glass shade and 15 W LED Bulb of best quality including cost of material and fixing etc., all complete.

Supply and fixing of 18W LED 4000K 2 x 2 Square Type Recessed light Fitting including cost of fixing charges, tools, connetions and etc., completed.

Design, fabrication, supply and erection of following sub -switch board cubical type floor mounting arrangements

Supply and erection of 125 Amps capacity floor mounting / wall mounting metering panel board (Cubical type) of size 5'x4'1'6" with bus bar chamber made up of 16 SWG MS sheet for 3 phase 4 wire system with 25mm x 3mm tin coated copper flats for three phase and (4 nos) neutral (25mmx3mm Earth bus bar 1no on the rear side of the panel board;

Supply and erection of 250 Amps capacity floor mounting / wall mounting metering panel board (Cubical type) of size 5'x4'1'6" with bus bar chamber made up of 16 SWG MS sheet for 3 phase 4 wire system with 25mm x 6mm tin coated copper flats for three phase and (4 nos) neutral (25mmx3mm Earth bus bar 1no on the rear side of the panel board;

Supplying and fixing of Hydraulic Door Closer of various sizes of approved quality using Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer with Double Speed Adjustment like HARDWYN (make) ‘GAZEL’ (or) Equivalent (with ISI Monogram)

Drilling of 150mm dia vertical bores in hard rock area to any required depth as directed by the departmental officers including labour charges for inserting of casing pipes and assembling in the drilled hole, including joint if necessary grouting the casing pipe etc., and including transportation charges for the rig and supporting vehicles from one place to another place etc., (i) Upto 150m depth ending below Ground level

(ii) From 150m upto 180m depth ending below Ground level

(iii) From 181m upto 210m Depth ending from ground level

(iv) From 211m upto 240m Depth ending from ground level

(v) From 241m upto 270m Depth ending from ground level

(vi) From 271m upto 300m Depth ending from ground level

Supply and delivery of the 160mm dia unplasticised special blue plain PVC heavy duty casing pipe as per IS mark with screwed and socket end to suit deep borewell of approved quality including conveyance charges etc., complete and as directed by the departmental officers.

Supplying and fixing of Bore end cap using PVC 200mm dia etc., all complete

Geologist survey Charges

Supply and Delivery of Borewell Submersible motor Pumpset with ISI mark IS 8034 without Panel Board of 7.5H.P capacity electric motor pump set with accessories at bore well for Single phase operation etc..,all complete and as directed by the departmental officiers.(The brand of pumpset should got approved by the Executive Engineer before erection).

Supply and delivery of 5 HP Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark.

Labour charges for the erection of submersible pumpset in Borewell/open well including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. Upto 5 HP

Above 5 HP to 10 HP

Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). 5 HP

Supply and delivery of required dia nylon rope of best appred quality for erection of submersible pumpset etc.. all complete and as directed by the departmental officers.

Supplying and laying 3 core 4 sqmm FLAT COPPER CABLE with ISI mark including cost of all materials specials etc. all complete.

Supplying and delivery of 50mm dia UPVC Column pipe cristal coupler type, screen pipe of best approved quality to suitable for suction, air pipe for the borewell including necessary threaded couplers etc.

Supplying and laying of following Dia GI pipe of best and approved quality having ISI mark including cost of coveyance and delivery at site of work etc., all complete and (Above GL) a) 50mm Dia GI Pipe 'B' Class

Supplying and laying of following Dia GI pipe of best and approved quality having ISI mark including cost of coveyance and delivery at site of work etc. all complete . (Below GL) a) 100mm Dia GI Pipe 'B' Class

Supply and fixing of following dia GI Specials of best approved quality,with ISI mark including cost and conveyence and fixing in position etc., all complete in all respects complying with relevant standard specification and as directed by the departmental officer (The brand and quality of the GI specials should be got approved from EE before use). a) 50mm Dia GI Bend

b) 50mm Dia GI HEX Nipple

c) 50mm Dia GI Coupling

d) 50mm dia GM non return valve

e) 50mm Dia GI Union

f) 65mm Dia GI HEX Nipple

g) 65mm Dia GI Coupling

h) 65mm Dia GI Union

i) 65mm Dia GI Tee

j) 65mm Dia GI Elbow

k) 65mm Dia GM Gate valve

l) 65mm Dia GI Bend

m) 65mm x 50mm dia GI reducer

n) 40mm MS Bore Clamp set

Supplying, laying, fixing and jointing the following PVC pipes as per ASTM-D-1785 of schedule 40 of wall thickness not less than the specified in IS 4985 suitable PVC/GI specials/GM specials like elbow, tee reducers, plug, union, bend, coupler, nipple GM gate valve, check and wheel valve etc. (Below Ground level) a) 50mm PVC pipe.

Run off main with 4 wires of 4 Sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, 1.1 KV grade cable with continuous earth by means of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 KV grade cable

GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height

Supply and fixing of MS cable box of suitable size on wall for the entry of 4 x 16 sqm /3.5c x 25 sqm with cable gland suitable for the above size with earth connection.

Supply and fixing of 120W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting

Supplying and fixing of Heat Combination (ROR and Fixed Temp) Detector with base.

Supply and fixing the following copper Crimping Lugs suitable for the UG cable etc to complete. a) 3.5 Core 25 Sqmm Cable

Supply and fixing of following GI pipes `B` class of best approved quality,with ISI mark including cost and conveyence and fixing in position etc., all complete. a. 25mm dia

b. 65mm dia

Labour charges for the GI and UPVC pipe below ground level a. 25mm Dia GI Pipe

Cleaning Juliflora Jungle with Uprooting

Dismantling the existing Brick / Stone Masonry in cement mortar walls under 3m high and clearing away and carefully stacking materials useful for re-use for any thickness of walls

Dismantling the existing Plain Cement Concrete and clearing away and carefully stacking materials useful for re-use etc., all complete.

Dismantling RCC by manual / by using deploying machineries and clearing away and carefully stacking materials useful for re-use etc., all complete.

Supply and delivery at site and fixing of SFRC manhole cover with frame with locking arrangement of Size 600 x 600 mm

Clearing Light Jungle and clearing away from site etc., all complete.

Hire charges for deploying earth moving machinery (JCB/Poclain) for earthwork including diesel, oil and labour charges etc., complete

Supplying and fixing of Cylinterical door lock including labour charges for fixing etc.,

Supply and fixing column corner rubber guard with reflect stricker for stilt floor parking column including labour charges for fixing etc.,

Purchase fuel (Diesel) and filled the new generator etc., all complete

Please Enable Macros to View BoQ information