Telecom: 1.Telecom arrangements in connection with rehabilitation of station building at Godumgura(GDQ ) station in Sr.DEN/West juridiction. 2.Telecom arrangements in connection with rehabilitation of station building at Chitigidda(CTF) station in Sr.DEN/West juridiction. 3. Raising of PF 1 & PF 2 from Rail level to High level, Provision of COP and passenger amenities at Chitgidda station under Sr.DEN/West/SC Juridiction. 4. SEM Station:Proposed Raising of Platform No.2 to High level at Seram station. 5. SKP Station: Raising of PF.1 & 2 to HL ,Provision of COP,Pathway & passenger amenities at SKP. 6. Telecom arrangements in connection with Br.N0 191 at km 166/1-2 rebuilding with RCC box. 7.SC Division :Telecom arrangement in connection with Upgradation of COP by providing SS gutters and new sheeting to arrest leakages at stations under Sr.DEN/West/SC jurisdiction. (SKP,NPL,LPI,CDNR,BRBD,BTNR,SEM,MQR,CT). 8. Telecom arrangements in connection with Construction of female block of new running room at KZJ for resting of running staff. 9.Provision of addl. COPs and upgradation of existing COPs and Upgradation of Existing COP's with new sheeting & gutter in DEN/Central jurisdiction.( upgradation of existing COPs at GNP,ALER,WP,BN,MLY and upgradation of existing COP with new sheeting & Gutter at GNP,RGP,ALER,BN,MLY stations) 10..Upgradation of COA systems at 22 locations over SC division and Provision of COA at new locations Ghatkesar,Sanathnagar,Telapur,Ramchandrapuram stations. Signal: 1. Signalling arrangement in connection with Rehabilitation of STATION MASTER room at CHITTIGIDDA (CTF) Station. 2. Signalling arrangement in connection with Rehabilitation of STATION MASTER room at GODAMGURA (GDQ) Station. 3. Signalling arrangements for proposed raising of PF 1 & PF 2 from Rail level to High level, Provision of COP and passenger amenities at Chitgidda station unde

A-SUPPLY PORTION S&T SOR

B-SUPPLY PORTION S&T NON SOR

C-LABOUR PORTION S&T SOR

D-LABOUR PORTION S&T NON SOR

Item Breakup - A-SUPPLY PORTION S&T SOR

Supply of network 8 port Ethernet switch with SFP and loaded with SFP modules rj 45 10m network interface, Numbers D-Link or similar. (To be Inspected by CONSIGNEE)

4 wire train traffic control equipment with DTMF signalling way station equipment IRS:TC 60-2007 Amd.1 or Numbers latest and way station control telephone as per specification IRS : TC 38-97 Amd. 2 or latest. (To be Inspected by RDSO)

Supply of Power Supply Unit for telecom installations of 2A output capacity as per specification IRS: TC 72-97 Numbers Amd. I or latest with 12V / 7AH maintenance free battery. (To be Inspected by RDSO)

Supply of Maintenance Free Batteries of 12V/100AH AMARAJA/ EXIDE/ Panasonic or equivalent brand. (To be Numbers Inspected by CONSIGNEE)

Supply of Thermo shrink jointing kitforjointing underground 0.9mm dia conductor 6 quad cable as per Numbers specification IRS: TC 77-2012 Rev. 3 (Amd. ito Amd. 3) or latest. (To be Inspected by RDSO)

Supply of VF Transformer 2T assembly of type 2 with impedance ratio 470: 1120 ohms as per specification Numbers IRS: TO 76 -2000 with Amd. 1 or latest. (To be Inspected by RITES)

Supply of 10 pair Terminal block of Wago Make or Similar (with lever type disconnection & reconnection Numbers facility) duly fitted in C.T. box of approved quality, suitable for termination of cable from 0.4mm to 0.9mm conductor. (To be Inspected by CONSIGNEE)

Supply of Push button corded auto telephone with Caller ID facility of a) Volume control, b )Incoming & Numbers outgoing call memory, c) music on hold, d) selectable ringer melodies. Make : BEETEL, Model : M77/ BPL/ PANASONIC or similar (To be Inspected by CONSIGNEE)

Supply of Desk type 2 wire, 12 way DTMF selective calling group telephone (Selective Calling I Group Numbers Telephone) complete as per specification IRS: TO 80-2000 Amd. I or latest with suitable power supply unit. (To be Inspected by RITES)

"Supply of modular terminal block (WAGO or similar) as perRDSO specification ROSO /SPN / 189/2004 Ver. 3.0 Set or latestconsisting the following parts: a) 2 conductor disconnect terminal block - 6 numbers b) End / intermediate plate suitable for 2 conductor disconnect terminal - 1 number c) Screw less end stop similar to WACO Model No. 249-117 -2 numbers d) Insulated jumper WAGO Model 280-402 - 5 numbers e) Din Rail - 0.1 metre per set (in length of 1 metre for everyten set)" (To be Inspected by RDSO) SECUNDERABAD DIVISION-S AND T/SOUTH CENTRAL RLY

"Signal post telephone Master and Slave unit fit for 25kV RE area of Tummala Electronics or Epsilon or similar Set make with following Specification: 1. 02 No's of 8 ohms / 45 watt / 4 inch speakers 2. Master unit with PTT facility 3. Buzzers & LED for calling indication 4. Operating voltage 12V DC 5. Double clamps for mounting on signal post 6. Housing rugged weather proof metal housing 7. Audio Power amplifier." (To be Inspected by CONSIGNEE)

Supply of emergency socket six pin flat with 6 pin suitable plug as per specification IRS: TC 42-87 with Amd. Set 1, 2, 3 or latest. (To be Inspected by CONSIGNEE)

Supply of 6TB internal hard disc with power and SATA data cables suitable for 16 channel super NVR. (To be Numbers Inspected by CONSIGNEE)

Supply of following type of Terminal block of Wago Make or Similar (with lever type disconnection & Numbers reconnection facility) duly fitted in C.T. box of approved quality, suitable for termination of cable from 0.4mm to 0.9mm conductor. 24 pair ." Including welding of door hinges / brackets to ensure proper alignment and rigidity. Welded portions shall be ground smooth, treated with anti-corrosive primer, and painted to match the box surface, complete in all respects." (To be Inspected by CONSIGNEE)

Supply of Permanently lubricated HDPE Duct with outer diameter of 40mm and inner diameter of 33mm as Kilometre per specification RDSO/SPN/TC/45/2013 Revision 2.0. The length of the duct shall be 1km. Two end plugs shall be provided along with the drum. (To be Inspected by RDSO/RITES)

Supply of GKP type Location Boxes (a) Full size as perdrg. No. S&T/MFT/T.2378 (To be Inspected by RITES)

Supply of relay fixing frame for full location box. The frame shall be of approximate size 940mmx150mm and Numbers made with powder coated MS angle of 25mmx25mmx 3mm. The frame shall have suitable holes to fix in full location box. (To be Inspected by CONSIGNEE)

Supply of Universal Locks with one steel key for every ten locks or part there of (For example, if locks ordered Numbers is 10, 1 key is to be supplied and if locks ordered is 20, 2 keys to be supplied. However, 2 keys to be supplied if locks ordered is between 11 and 19). (To be Inspected by CONSIGNEE)

Supply of Electric Key Transmitter (EKT) rotary type complete as per DRG. No. SA 22601/Alt 4 or latest and Numbers specification IRS: S 21-2001 Rev. 1.0 or latest. The ward number shall be as specified by the Engineer in- charge. (To be Inspected by RITES)

Supply of Failsafe electronic flasher device 24V DC, 3A as per RDSO specification RDSO/SPN/173/2002 Amd. 2 Numbers or latest. (To be Inspected by CONSIGNEE)

Multi-strand, single core, copper conductor 16/0.2 (16 wires, diameter of each wire is 0.20mm) (0.5sq.mm) Numbers wire coil as per specifications IS 694:2010 or latest, IRS: S 76-89 Amd. 3 or latest. Length of coil should be 100m. Colour of coil to be specified by Engineer in charge. (To be Inspected by RDSO)(ITEM UNIT IS COIL)

Multi-strand, single core, copper conductor 28/0.3 (28 wires, diameter of each wire 0.30mm) flexible wire coil Numbers as per specifications IS 694:2010 or latest, IRS: S 76-89 Amd. 3 or latest. Length of coil should be 100m. Colour to be specified by Engineer in charge. (To be Inspected by RDSO)(ITEM UNIT IS COIL)

Supply of 35 Sq.mm PVC insulated multi-strand, single core, copper conductor 277/0.4 (277 wires, diameter of Metre each wire is 0.4mm) cable as per IS:694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100- meter coil. Colour to be specified by Engineer in charge. (To be Inspected by RITES)

Supply of 16 Sq.mm PVC insulated, multi-stand, single core, copper conductor 127/0.4 (127 wires, diameter of Metre each wire is 0.4mm) cable as per IS: 694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100 meter coil. Colour to be specified by Engineer in charge. (To be Inspected by RITES)

Supply of 10 Sq.mm PVC insulated, multi-strand, single core, copper conductor 140/0.3 (140 wires, diameter Metre of conductor 0.3mm) cable as per IS: 694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100 meter coil. (To be Inspected by RITES)

Supply of Terminal block: 1 way Poly butylene Terephthalate (PBT) of size 60mm (link centre to centre) as per Numbers RDSO DRG. No. SA23745/Alt.5 or latest, SA23746/Alt.5 or latest, S23747/Alt.5 and specifications IRS: S 75- 2006 Rev. 2.0 (Tentative) or latest, IRS: S 23-88 Amd. 1 or latest. (To be Inspected by RDSO)

Supply of Terminal block: 6 way Poly butylene Terephthalate (PBT) of size 25mm (link centre to centre) as per Numbers RDSO DRG. No. SA23756/Alt.3 or latest, S23757/Alt.4 or latest and specifications IRS: S 75-2006 Rev. 2.0 (Tentative) or latest, IRS: S 23-88 Amd. 1 or latest. (To be Inspected by RDSO)

Supply of mini WSB markers for modular terminals WAGO Model No. or similar - 100 Nos.(To be Inspected by Set CONSIGNEE)

Supply of powder coated Cable termination rack of size 880mm x 2075mm made using 50mm x 50mm x Numbers 6mm (6mm thickness) MS angles. The cable termination rack shall be supplied with stainless steel nuts and bolts for fixing the rack, tripod bases and reel insulators (for K rack, P rack and power rack), cable ladder of 400mm width and 2075mm length with two angles of size 40mm x 40mm x 5mm (5mm thickness) and supporting flats of size 25mm x 25mm. Suitable holes shall be drilled to fit hylam sheet as per standard practice (To be Inspected by CONSIGNEE)

Supply of Hylam sheet, resin bonded, grade P3 as per IS specification IS 2036 of 1974 or latest of following Numbers size: Hylam Sheet of size: 2400mm x1200mmx6mm. (To be Inspected by CONSIGNEE)

Hylam Sheet of size: 2400mmx600mm x6mm. (To be Inspected by CONSIGNEE)

Hylam Sheet of size: 2400mm x600mm x3mm. (To be Inspected by CONSIGNEE)

Supply of Lugs and Eyelets: Aluminium lugs 25 sq.mm of reputed make. (To be Inspected by CONSIGNEE)

Copper lugs 10sq.mm of reputed make. (To be Inspected by CONSIGNEE)

Copper eyelets to suit 16/0.2 wire Dowell's or similar make. (To be Inspected by CONSIGNEE)

Copper eyelets to suit 10.sqmm wire Dowell's or similar make. (To be Inspected by CONSIGNEE)

Supply of 200 way tag block as per specification IRS: S 77/2006 Rev. 1.0 or latest and DRG. No. SA 24751 or Numbers latest. (To be Inspected by CONSIGNEE)

"Supply of basic material to construct unit Maintenance Free Earth as per specification RDSO/SPN/197 Ver. Set 1.0 or latest consisting of the following: a) Copper bonded steel electrode 3m long, 17mm diameter with copper bonding thickness mini 250 micron and UL listed and marked - 1 No. b) Earth enhancement compound of RDSO approved brand supplied in sealed bags of minimum 10kg - 3 Nos. c) Copper strip with dimensions 150 x 25 x 6mm to terminate earth rod - 1 No. d) Copper strip with dimensions 300 x 25 x 6mm Main Equi- potential Earth Bus bar (MEEB) - 1 No. e) Copper strip of with dimensions 150 x 25 x 6mm Sub Equi- potential Earth Bus bar (SEEB) - 1 No. f) 35 Sq.mm multi-strand PVC insulated Copper Cable (15 meter). " (To be Inspected by RDSO)

"Supply of Domino type operation cum indication panel to suit 3/4 road station as per RDSO/SPN/186/2004 Numbers Rev.2 or latest with LED indicators for tracks, signals, points, crank handles etc. and knobs / push buttons for points and signal operation as per the panel diagram supplied by railway. The layout shall be painted with screen printing. Following spares shall be supplied with the panel: 1. Knob/push buttons - 2 Nos. 2. Domino with cancellation button - 1 No. 3. Spare dominos of different types - 5 Nos. 4. 24V impulse counter - 2 Nos. 5. Reminder caps - 10 Nos. Note: Panel shall be supplied with neat internal wiring and bunching done from each domino to terminal block. Panel wiring particulars shall be submitted along with the panel at store of consignee for inspection. Knobs / push buttons to be procured from approved firms."(To be Inspected by CONSIGNEE)

Supply of Teak Wood Block Counter suitable for DAIDO / NBT block instruments as per standard drawing. & Numbers instructions of engineer in charge (To be Inspected by CONSIGNEE)

Supply of Solid State Buzzers with different frequencies in metallic / plastic casing working on 12V - 24V - 60V. Numbers (To be Inspected by CONSIGNEE)

Supply of 6 digit 24V non resettable impulse counter. (To be Inspected by CONSIGNEE)

Supply of following type of Terminal block of Wago Make or Similar (with lever type disconnection & Numbers reconnection facility) duly fitted in C.T. box of approved quality, suitable for termination of cable from 0.4mm to 0.9mm conductor. 24 pair (To be Inspected by CONSIGNEE)

Supply of Filter Unit for use in conjunction with block instrument as per specification IRS: S 68-89 or latest. (To Numbers be Inspected by RITES)

Supply of Block Bell Equipment as per specification IRS: TC 44-88 with Amd. 1 or latest. (To be Inspected by Numbers RITES)

Supply of Electrostatic Rubber Matting of thickness 2mm as per IS-15652/2006 with suitable adhesive Sqm material. (To be Inspected by CONSIGNEE)

Supply of HDPE jerry can of 20 litres capacity. The jerry can shall be supplied at site as per the requirement of Numbers site in- charge. (To be Inspected by CONSIGNEE) SECUNDERABAD DIVISION-S AND T/SOUTH CENTRAL RLY

Supply of Fibre table of 4 Feet x 2 Feet one number and fibre chairs two numbers. They should be of standard Set make and quality like Neelkamal or Similar. (To be Inspected by CONSIGNEE)

Supply of key chains with ring and plastic name plate of dimensions 60mm x 20mm x 3mm. The plastic name Numbers plate shall be engraved with station name on one side and key particulars on the other as specified by the site in-charge. (To be Inspected by CONSIGNEE)

Supply of Godrej Navtal Locks with diameter of 50mm with 3 keys. (To be Inspected by CONSIGNEE)

Supply of Double key lock for relay room. (To be Inspected by CONSIGNEE)

Supply of Godrej shelf storage of 916 x 486 x 1981 mm or similar (To be Inspected by CONSIGNEE)

Supply of steel stools 18" height neatly finished and painted. (To be Inspected by CONSIGNEE)

Supply of T-networking modem for Remote Terminal Unit connectivity. (To be Inspected by RITES) Total 3549857.00

Item Breakup - B-SUPPLY PORTION S&T NON SOR

Supply of Flexible PVC insulated 3-core x 2.5 sq. mm multi strand power cables provided for each of the Metre display boards shall conform to specification no. IS: 694:1990 reaffirmed 1995 or latest. Make: Finolex or any IS brand. (To Be Inspected by RITES)

Supply of UTP CAT-6 Cable each drum/Box of 305 mtrs. Make: MOLEX/FINOLEX/DLINK /TRICOM or latest.(To Numbers Be Inspected by CONSIGNEE)

Supply of Micro phone AGN-500 or latest of (Make: Ahuja) (To Be Inspected by CONSIGNEE)

Supply of Micro phone Stand Ahuja make(ATS-5) (To Be Inspected by CONSIGNEE)

Supply of PA Column Speakers Ahuja Make ASC 20T (To Be Inspected by CONSIGNEE)

Supply of reflex horn Speakers Ahuja Make AHUJA UHC 30XT or latest (To Be Inspected by CONSIGNEE)

Supply of one way projection Speakers Ahuja Make 5251T or latest Supply of Micro phone AGN-500 or latest Numbers of (Make: Ahuja) (To Be Inspected by CONSIGNEE)

Supply of Speaker Cable 2 core PVC sheathed & Screened of size 47/0.193 as per specification No. IS 694. (To Metre Be Inspected by CONSIGNEE)

Supply of 9U equipment rack of HCL/Valrack/Bestnet make as per specification .Compatable with 19" Numbers international standards ,front door with toughened glass quality,cable insertion on top & bottom pannel to provide easy cable entry.Top section with 2 Fan mounting provision with accessories:cable manager ,cooling 2 Fan tray,PDU,5 (To Be Inspected by CONSIGNEE)

Supply of 24U equipment rack of HCL/Valrack/Bestnet make as per specification .Compatable with 19" Numbers international standards ,front door with toughened glass quality,cable insertion on top & bottom pannel to provide easy cable entry.Top section with 2 Fan mounting provision with accessories:cable manager ,cooling 2 Fan tray,PDU,5. with Equipment Trays (To Be Inspected by CONSIGNEE)

Passive optical network power meterBrand : ATTL Brand Type : Registered Brand Catalogue Status : Numbers Catalogue not verified by OEM Selling As : Reseller not verified by OEM,Category Name:Passive optical network power meter,Model:OPM WITH VFL.( TO be inspected by Consignee)

"Supply of Simplex Single Mode anti rodant Optical Fiber Metal Patch Cord, 3 Meter FC /UPC - LC/APC/SC- Numbers LC/SC-SC,as per consignee requirement) Extra Strong, Powerful with More Speed " (To Be Inspected by CONSIGNEE)

Supply of Simplex Single Mode anti rodant Optical Fiber Metal Patch Cord, 1 Meter, 3mm(FSMS SC/UPC-SC Numbers /UPC/FC-LC/SC-LC as per consignee requirement) Extra Strong, Powerful with More Speed (To Be Inspected by CONSIGNEE)

Supply of APC/UPCOutdoorArmoured Patch cord SC-SC/SC-LC/LC-FC as per siterequirement Simplex-5 Numbers Meterwith OD of 5mm (To Be Inspected by CONSIGNEE)

Supply of APC/UPC OutdoorArmoured Patch cord SC-SC/SC-LC/LC-FC as per siterequirement Simplex-15 Numbers Meterwith OD of 5mm (To Be Inspected by CONSIGNEE)

"Supply of 24F SC FDMS Complete set rack mounted 24F FMS fiber part no.fms-1u 24FS 24FP Raychem make Numbers including 24Nos 0.2db FC/PC adaptors and 24numbers 900 micron 1.5 meter FCPC pigtails. RDSO Spec No.: RDSO/ SPN/TC-037-2000 (Ver.3) or latest" (To Be Inspected by CONSIGNEE)

Supply of 25mm PVC pipes 3mtr long of superior quality Sudhakar/Modi/Anchor/Supreme/Swastic make with Numbers ISI mark. (To Be Inspected by CONSIGNEE)

Supply of Exide 12v 26AH PowerSafe Sealed Battery - UPS Make:AMARAJA/ EXIDE/ Panasonic or equivalent Numbers brand. (To Be Inspected by CONSIGNEE)

Supply of Fiber Distribution Management System 6F SC Type Stainless Steel, Galvanized Coating, Ladder Type Numbers Cable Tray (To Be Inspected by CONSIGNEE)

Supply of 6 Fibre armoured Single Mode optical fiber cable.Make: Finolux / Surabhi. (To Be Inspected by Kilometre CONSIGNEE)

Supply of Wi-Fi Speed Up to 867 Mbps/5 GHz + 400Mbps/2.4 GHz, 5 Gigabit Ports, 4 External Antennas, MU- Numbers MIMO, Dual Band, WiFi Coverage with Access Point. Make: TP-Link Archer AC1200 Archer C6 or latest. (To Be Inspected by CONSIGNEE)

Supply of Outdoor Armoured Patch cord simplex SC-ST/FC-LC as per site requirement Simplex-5 Meter with Numbers OD of 5mm (To Be Inspected by CONSIGNEE)

Supply of 8 Port Gigabit PoeSwitch | Smart Managed | PoePort + 2 SFP(Loaded), 61W | 802.3AFCompliant | Up Numbers to 512 Vlan | 8KMac Table | L2/L3/L4 Qos | LinkAggregation Make: TP-LinkJetstream / DIGISOL / Dlink /Netgear (To Be Inspected by CONSIGNEE)

Supply of 12V/7AH sealed maintenance free (SMF)batterry. Make: EXIDE/AMARARAJA/HBL (To Be Inspected by Numbers CONSIGNEE)

Supply of 8-Port Desktop Gigabit Ethernet Switch/Hub, Ethernet Splitter 10/100/1000 Mbps. Make: TP-Link OR Numbers LATEST (To Be Inspected by CONSIGNEE)

Supply of layer 2 manageable switch 24 port with all power cord, data cords, power supply, stacking cable, Numbers 1G network module, 1000 Mbps single mode rugged SFP- 4 Nos. & other accessories, software. as per RDSO specification no. RDSO/SPN/TC/83/2020 Rev. 2.0 Make & model CISCO WS 2960X24 TS-L, MROTEK Model LAVENDER-244X, Juniper, Alcatel or Similar with TTP certification. (To Be Inspected by CONSIGNEE)

Supply of 4-WAY- Electrical Power EXTENSION-BOARD4 Universal sockets with master switchUniversal sockets Numbers provide usage of different types of pins across multiple countries6 A -240 V, 0.5 Sq. mm wire thickness (1440 VA)Rating is 6 A / 1440 VA for all residential uses1.5 metre High quality wire with 3 pin plug topSurge ProtectionHigh Power MOV provides protection to your connected devices from any voltage surges Overload protection Replaceable fuse for arresting any current overload in circuit & providing safety to connected devices LED light For switch on/off status (To Be Inspected by CONSIGNEE)

Supply of Visual Fault Locator 50KM 50mW Fiber Optic Cable Tester Meter VFL Red Light Pen Light Source Numbers Testers (To Be Inspected by CONSIGNEE)

Supply and installation ofOptical to Ethernet mediaconvertor for single modesingle fiber as per Pair RDSOspecification No.RDSO/SPN/TC/103/2013 Rev.2Of Make: D Link/TpLink/Tenda (To Be Inspected by CONSIGNEE)

Supply of 2 core x70 Sqmm LTUG XLPEAluminum armored cable as per BISspecification IS 7098 Part I or Metre (latestamendments ) along with end terminations (To Be Inspected by RITES

Supply of pu foam spray forgap filling pidilite Loctite TiteFoam PU sealant(White),Expanding Foam for large Numbers gapsfilling, keeps dust and pestsaways, DIY dries fast,waterproof no shrinkage easyapplication doors PVC pipebathroom, AC ducts 340g orsimilar (TO BE INSPECTED BYCONSIGNEE)

Supply of Small Sized Valve Regulated Lead Acid Batteries of 12V/7.0 Ah/12P70 with 2 Years warranty of Numbers EXIDE make or similar (To Be Inspected by CONSIGNEE) SECUNDERABAD DIVISION-S AND T/SOUTH CENTRAL RLY

Supply of Digital multimeterSpecifications: digital TRMS 5Digit 60000 counts withfollowing features Numbers Frequencyrange: 6Hz to 1MHz Frequencymv AC band width: 100KHz ACvoltage rage: 1mV-1000V, +/-0.5% DC voltage rage: 1uV-1000V, +/- 0.05% AC currentrage: 1uA-10A, +/- 0.5% DCcurrent rage: 1nA-10A, +/-0.2% Capacitance range: 1pF-10000uF Datalogging: 32000Readings Dual display: Available Other features:Temparature messurement,Diode, continuty, Duly cyclemeasurement, self batteryvoltage measurement, Lowpass filter, Min, Max andAverage value recording, Backlight, Bargraph, Protectiverubber holster.Model no:Rishabh 6016 or Similar(To Be Inspected by CONSIGNEE)

Supply of Supervisors revolving chair with specfications mentioned in the referance Purchase order or similar. Numbers (To Be Inspected by CONSIGNEE)

"Portable Insulation Monitor with fault locator kit for Railway ""Portable Insulation Monitor with fault locator kit Numbers for Railway. "" Includes of following i iso685-D-P Insulation Monitoring Device (IMD) with integrated locating current injector. ii EDS195PM Insulation fault locator iii PSA3052 Measuring clamp 52mm iv PSA3352 Measuring clamp 52mm v EDS195PM Accessories for 1no of USB power supply unit: Primary : 100...240 V, 50...60 Hz Secondary: DC 5 V, +/- 10 %, Power consumption 0.5 W vi.ISO685-D-P Accessories for 3nos of safety measuring cable black along with clamps and 2nos Safety measuring cable green / yellow along with clamps for system connection and 1 no Auxiliary supply cable." (To Be Inspected by CONSIGNEE)

"Supply of Data Entry Terminal ( Industrial Grade) for entry of Train Details by ASM & communicating the Numbers information to CMU via Data logger at station as per specification : Processor : Intel Core i7-7700 3.2 Ghz Processor or similar , RAM : 8 GB DDR4 RAM Storage: 1TB HDD Serial Ports : 6 Ethernet Port : 2 USB 3.0 Port : 4 & USB 2 ports:2 HDMI Port : 3 Key Board : Wired Key board Mouse : USB wired Optical Mouse Operating System : Windows 10 Professional or latest (Licensed version). Storage Temperature: -40 to 70C System Make : Dell or Similar Monitor : 22"" LED Monitor (with HDMI/DVI port/Serial Port) - Antivirus Software: McAfee Total Protection - 1 users Power supply: DC power adaptor." (To Be Inspected by CONSIGNEE)

Supply of USB to Opto Converter (To Be Inspected by CONSIGNEE)

Supply of Client PC (Industrial )Processor:Intel Core i7,2.8 Ghz or similar,Memory(RAM): 8GB,Storage :1TB GB Numbers SSD,Serial Ports:4,Ethernet port :1,USB Port: 3,Key Board:Standard keyboard,Mouse:Optical Mouse,Operating System:Windows 10 Embedded(Licensed version),Monitor:21.5"/22" LED Monitor -Dell /HP or Similar,Security Software:Kaspersky antivirus or Mcafee or Similar (Licensed version),System Make:HP/DELL or Simialr, (To Be Inspected by CONSIGNEE)

Supply of APC/UPC OutdoorArmoured Patch cord SC-SC/SC-LC/LC-FC as per siterequirement Simplex-15 Numbers Meterwith OD of 5mm (To Be Inspected by CONSIGNEE)

Supply of APC/UPCOutdoorArmoured Patch cord SC-SC/SC-LC/LC-FC as per siterequirement Simplex-5 Numbers Meterwith OD of 5mm (To Be Inspected by CONSIGNEE)

Simplex Single Mode Optical Fiber Anti rodent Patch Cord, 1 Meter, 3mm SC-SC/SC-LC/FC-LC as per Consignee Numbers requirement Extra Strong, Powerful with More Speed. (To Be Inspected by CONSIGNEE)

"Supply of 4K HDMI Cable 50ft gold plated connectors HDMI Cable Support 4K 30Hz, 10.2 Gbps, Support Numbers ethernet, Projector-15M. Make: C&E or latest" (To Be Inspected by CONSIGNEE)

"Supply of External Media Converter With Specification:Optical Fiber Transceiver Parameters: Medium type : Numbers Single mode fiber Fiber Termination connectors : SC connector Medium Wavelength : 1310nm ± 40nm Data rate : up to 2Mbps Serial Communication Port Parameters: Interface Types : RS-232 Serial Port Connector : 5 pin RT male push fix connector Baud Rate : up to 57600bps. Power Supply Parameters: Input Voltage Working Range : 18-36V DC. Input to Output Supply Isolation : 1.5KV DC Supply Connector : 2 pin RT male pluggable Terminal Block connector Power Consumption : 4-Watt (Max.)" (To Be Inspected by CONSIGNEE)

"Supply of Dual Media converters Optical Fiber Transceiver Parameters: Medium type: single mode fiber Fiber Numbers Termination connectors: SC connector Medium Wavelength: 1310nm ± 40nm Serial Communication Port Parameters: Interface Types: RS- 232 or RS- 485 2 Euro connecter mounted on the card for interfacing with DC Motherboard. Baud Rate: up to 57600 bps. Power Supply Parameters: Input Voltage: 5 V DC. Thermal Characteristics: Operating Temperature: -10C to + 70C" (To Be Inspected by CONSIGNEE)

Supply of Dual Port E1 to Rs.232 (To Be Inspected by CONSIGNEE)

Supply of External RS232 to E1 Converter (To Be Inspected by CONSIGNEE)

Supply of Multi port Front End Processor as per RDSO specNo:S:99/2006(Amendt.3) or Latest (To Be Inspected Numbers by CONSIGNEE)

Supply of USB to RS232 Converter. .(To Be Inspected by CONSIGNEE)

Supply of -48 volts E1 Extender at the existing data loggerend ( (To Be Inspected by CONSIGNEE)

Supply of 24 volts E1 Extender at the existing data loggerend (To Be Inspected by CONSIGNEE) Total 10557989.16

Item Breakup - C-LABOUR PORTION S&T SOR

Straight through / derivation with/without transformer joints: Installation Thermo shrinkable jointing kits for Numbers straight through / derivation joints for LC gate, pump houses etc where VF transformers are not required and derivatin joint by using 2T trasformer ( to be housed in the joint) . This includes tapping of nominated Quad at a specific location shown by the Railway Engineer at site to the jelly field cable already laid. All material including valco tapes except thermo shrinkable jointing kit shall be supplied by the contractor. (Refer Annexure for instructions on cable jointing)./ JOINT( To be inspected by consignee)

Supply and fixing of different sizes of PVC casing /Pipes as required by Railway at site by fixing /clamping to RMT the wall for indoor wiring purposes. All the material required for fixing PVC casing/Pipes are to be supplied by contractor( To be inspected by consignee)

Supply and installation of 48 volts 200 AH maintenance free VRLA battery in charged condition as per RDSO Set specification lRS:S-93/96(B) (Amd. 1 ) or latest. (2 volts 200 AH - 24 Nos. each set). ( To be inspected by RDSO)

Supply of lightning and surge arrestors of Class B & C suitable for single phase supply in TT network as per Numbers specification RDSO/SPN/165/2023 ver.4.0 amd-1 or latest and as recommended by RDSO letter No. STS/E/IPS/GENL dated 27/01/2006 (Amendment 5).( To be inspected by consignee)

Supply and laying of Switch board cable 10 Pair / 0.6mm dia. as per TEC 68080:2002 or latest. ( To be Metre inspected by consignee)

Transportation of materials from any Stores to Site and vice-versa including loading and unloading. Lead upto Kilometre 10000.00 50 Kms ( To be inspected by consignee) (ITEM UNIT IS PTPK)

Lead above 50 Kms ( To be inspected by consignee) (ITEM UNIT IS PTPK)

Laying of HDPE duct 40/33 mm dia in the trenches and in protective works already provided. ( To be Kilometre inspected by consignee)

Blowing of armoured optic fibre cable (OFC Cable supplied by Railways) into the duct supplied vide other NS Kilometre item of supply portion by using blowing machine and associated works. 10% of OFC length to be blown extra on both ends of Duct i.e. total 20% of Duct length. Before blowing the duct integrity shall be tested. If any defect is found during duct integrity test, the entire length of HDPE duct from one chamber to another chamber is to be replaced by the contractor at his own cost. Payment will be made as per the length of Duct from which OFC is Blown. ( To be inspected by consignee)

Supply and installation of ONVIF 16 Channel NVR similar to Model No. 4416-4K82 series along with required Numbers licensed video management software compatible to work with Dahua/Hiki vision/CP Plus! Honeywell make 4 MP Bullet cameras. ( To be inspected by consignee)

Localisation and restoration of fault at /beneath EC socket as per technical specification. This include testing Numbers of EC socket, finding fault with fault locator, Taking out underground derivative joint, Restoration of derivative joint and safeguarding derivative joint in ground. ( To be inspected by consignee) (ITEM UNIT IS LOCATION)

"Excavation of trench,Depth of 1200mm and width of 300mm including marking of cable alignment, clearing Route Kilo of jungle, roots of trees, bushes, trial pits if required, refilling with excavated soil, ramming and consolidation Meter after laying of cables complete to the finished item of work in all type of Soil including soft rocky area as per (RKM) RDSO Sketch No. SDO!CABLE LAYING!003, as directed by engineer incharge" ( To be inspected by consignee) SECUNDERABAD DIVISION-S AND T/SOUTH CENTRAL RLY

Supply and Installation of OFC joint enclosure and splicing of Optic fibre cable (24 fibres) and testing as per Numbers technical specification No. GR OJC-2/02 Sept 2003. Supply of Splice Enclosure (24 fibre) shall be of TVS make Part No.1500-LI8X-XX or similar as per Board specification of TEC.& as per RDSO/SPN/TC/68/2014 Revision 1.0 amd 1 or latest . All materials including Fusion splicing machine used for fibre splicing and, OTDR for testing and other testing materials if any shall be arranged by the contractor ( To be inspected by consignee)

Excavation of jointing pit and provision of RCC/FRP joint /Loop chambers of 90 Cms. Inner dia 60 Cms depth Numbers and 3mm thickness with two pieces of top cover with hooks each and bottom cover with hole for drainage and cable entry as per Drg. No. RAILTEL/SR/OFC/ 2009/12 and as directed by Engineer to be provided at every joint location and at every Kilometre loop etc., The chamber shall be filled with sand mixed with ariti-stermic power, back filling and ramming of trench after HDPE duct laying, splicing and commissioning ( To be inspected by consignee)

Provision and laying cement concrete (including transportation o f a l l t h e material).Providing a n d laying in cum position cement concrete of specified grade including the cost of centring and shuttering :- 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) ( To be inspected by consignee)

Supply and fixing of galvanised MS-'C' channel of size 100mmx 50mm x 1200 mm with suitable clamps as per Numbers drawing No. S&T/ RE/78/2/76 and fitting of GI pipe supplied by Railways and with suitable clamps o n Girder Bridges without drilling holes i n the girders. G I Pipes are t o b e drilled with 6 holes o f 1/4" dia. p e r Meters around the pipe in zig zag manner before laying the 6 Meters pipe. To be inspected by consignee)

Supply and installation of rack mounted 24 fibre Distribution Management System (FDMS) of size 1U, of Numbers Reputed/Branded company make as per specification RDSO/SPN/TC/37/2020 Revision 4.0 with latest amendments. The FDMS shall include 24 SC-PC/ Required adaptors having insertion loss less than or equal to 0.1dB and 24 numbers 900 micron 1.5m SC-PC/Required pigtails. To be inspected by consignee)

Route Kilo Location survey for cable route and preparation of tentative cable route plan as per the instructions of Meter Engineer in- Charge. ( To be inspected by consignee) (RKM)

Jungle cutting along with the cable route Clearing grass/garbage and removal of the rubbish up to a distance RMT of 50 m outside the periphery of the area cleared (Measurement is to be done as per area cleaned). ( To be inspected by consignee)

Cutting of Rock, concreting after cable laying with 1 cement: 2 sand: 4 graded stone aggregate 20mm RMT nominal size and curing of concrete to the required number of days, except in bridges, culverts, level crossings, track crossings, cable pits and rocky soil including marking of cable alignment, clearing of debris etc., complete to the finished item of work as directed by engineer in-charge. All the material is to be arranged by contractor Depth of 300mm and width of 300mm where rock is visible from surface, concreting to ground level as per Drg No.SK/CN/NEW/1. ( To be inspected by consignee)

Cutting of Rock, concreting after cable laying with 1 cement: 2 sand: 4 graded stone aggregate 20mm RMT nominal size and curing of concrete to the required number of days, except in bridges, culverts, level crossings, track crossings, cable pits and rocky soil including marking of cable alignment, clearing of debris etc., complete to the finished item of work as directed by engineer in-charge. All the material is to be arranged by contractor Depth of 200 mm and width of 200 mm where rock is visible from surface to a depth more than 300 mm up to 550mm, excavation of trench with width 300mm above rock, concreting 200mm x 200mm after laying of cable as per Drg No.SK/CN/NEW/3 ( To be inspected by consignee)

Digging of cable trench to a depth of not less than 30 cm in rocky terrain/difficult terrain Concreting the trench RMT with 150mm thick concrete with 1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size. All the material is to be arranged by contractor. ( To be inspected by consignee)

Track crossing/ Road Crossing by Horizontal Boring method at culverts/track/pucca road as per SCR Drg. No. RMT 5770. This also includes insertion of HDPE pipe of 110 mm/G.I Pipe of 100 mm in the bore drilled (HDPE pipe/ GI pipe is to be supplied by Railway).( To be inspected by consignee)

"Supply of HDPE pipe of various diameter with material grade PE 100 as per specification IS Specification RMT 4984: 1995 up to latest amendment. HDPE pipe of 110mm Dia." ( To be inspected by consignee)

Trenching under Rails for crossing the track (Track Crossing) and refilling of trenches as per SCR Drg. No. RMT 5768. The track crossing shall be done at right angles. The depth of cable trench shall be 1.2 meter below the rail flange. The depth between top cable and the level of rail flange of the rail shall never be less than 1.0 meter. The ballast shall be stacked separately while making the trench and the earth soil shall be stacked separately. While re-filling the trench, the earth soil has to be filled first to the ground level and the ballast has to be properly put in the track. This work has to be done under supervision of supervisor of S&T and supervisor of P.Way. ( To be inspected by consignee)

Breaking of metal/ tar road and refilling after laying the cables as per drawing no.SDO/CABLE LAYING/010. The RMT surface of the road shall be concreted to match with the old surface. ( To be inspected by consignee)

Laying different type of cables in the trench. Termination covered elsewhere. ( To be inspected by consignee) RMT

Provision and laying cement concrete (including transportation of all the material). a)Providing and laying in cum position cement concrete of specified grade including the cost of centring and shuttering :- 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) ( To be inspected by consignee)

Provision and laying cement concrete (including transportation of all the material). Centring and shuttering ( Sqm To be inspected by consignee)

Supply and laying of split DWC pipe in already dug cable trenches as per Drawing No.SK.9/11 .The unit of RMT RMT means two split pipes of 1 Mtr each. A)120/103 mm diameter ( To be inspected by consignee)

Supply and laying of split DWC pipe in already dug cable trenches as per Drawing No.SK.9/11 .The unit of RMT RMT means two split pipes of 1 Mtr each. B) 250/217 mm diameter ( To be inspected by consignee)

Supply, transporting and installation of Concrete (RCC) Route Indicators at intervals of 50 meters as per Numbers instructions of engineer in charge as per drawing no. SK 12/10.They should be of standard RCC with letters "SCR S&T cable" as per type of cable laid to drawing. In case of telecom quad cable joint locations it shall be painted with GREEN and ORANGE colour for normal indication of cable path. ( To be inspected by RITES)

Supply & Laying of G.I Pipes with medium and threaded collar & coupler, quality to specification IS.1239 (part- RMT I) 1990 and galvanised to specification IS.4736-1986. a)G.I Pipes of 50mm diameter ( To be inspected by RITES)

Supply & Laying of G.I Pipes with medium and threaded collar & coupler, quality to specification IS.1239 (part- RMT I) 1990 and galvanised to specification IS.4736-1986. b)G.I Pipes of 100mm diameter ( To be inspected by RITES)

"Supply of Double Walled Corrugated (DWC) HDPE duct of various diameter of length of 6m as per Numbers specification RDSO/SPN/204/2011 Ver. 1.1 Amd. 1 or latest. The duct shall be supplied along with push-fit type O-ring coupler or end cap. DWC of outer Diameter 180mm and inner Diameter 153mm Note:-Contractor should submit the manufecturer internal test report,guarantee certificate,genuinness certificate for IS Brand. " ( To be inspected by consignee)

Supply a n d Filling sand i n trench/under floors/OFC chambers, complete as per instruction of engineer in cum charge. ( To be inspected by consignee)

Excavation of pit, casting concrete foundation and erection of apparatus case Full size as per SCR Drg. No. Numbers 5781 and fixing of 1 No.of 'E' type lock for the front door, latching arrangement for backdoor, fixing of Hylam sheet (Hylam sheet supply is covered elsewhere and Wooden Reapers also can be used in place of Hylam sheet for which supply & fixing covered elsewhere) and painting the apparatus case inside and outside with one coat of red oxide, two coats of aluminium paints outside and white paint inside including painting of termination, equipment and number particular on location box (foundation bolts and nuts, 'E' type lock, cement, river sand, stone jelly of size 20/20mm, paints, varnish, fixing bolts and nuts and all other miscellaneous material required for the work shall be supplied by the contractor). ( To be inspected by consignee)

Filling earth around location boxes/signal foundations for a width of 0.5m on all sides, up to a level 150mm Numbers below the foundation top. This work includes consolidation of earth by watering and ramming. The earth shall be taken from Railway premises as instructed by Railway representative at site. ( To be inspected by consignee)

Basement plastering of Full/Half location box. All the required men and materials are to be arranged by the Numbers contractor. ( To be inspected by consignee)

Excavation of coil pit up to a depth of 1 meter and dia of 1.5 meter for providing coil at location box, point, Numbers signals etc., This includes back filling and ramming of trench / pit after laying the cable and consolidation of soil. ( To be inspected by consignee) SECUNDERABAD DIVISION-S AND T/SOUTH CENTRAL RLY

Supply and fixing of teak wood reapers suitable for Full location Box with approx 50 mm width x 20mm thick Numbers and length of 940mm after applying two coats of wood primer. ( To be inspected by consignee) (ITEM UNIT IS PER REPEAR)

Supply and fixing of following Teak wood reapers/ Blocks after applying two coats of wood primer. Teak Wood Numbers Reapers suitable for Full Box: 75mm width x 20mm thick and length of 940mm. ( To be inspected by consignee) (ITEM UNIT IS PER REAPER)

Teak Wood Reapers suitable for Full Box: 50mm width x 50mm thick and length of 940mm and clamping the Numbers cable. ( To be inspected by consignee) (ITEM UNIT IS PER REAPER)

"Supply and fixing of following Teak wood reapers/ Blocks after applying two coats of wood primer. Teak Numbers Reapers suitable for Half Box: 50mm width x 50mm thick and length of 470mm and clamping the cable. ." ( To be inspected by consignee) (ITEM UNIT IS PER REAPER)

Supply and fixing of Teak Wood planks of sizes as instructed by the site in-charge with smooth finishing cum surface to be provided where ever required such as in location boxes relay room, equipment room and battery room, Fine wood polish of approved quality to be applied for two times after thorough application of emery paper. Fixing bolts and wood polish supplied by the contractor. ( To be inspected by consignee)

"Supply and fixing of following Teak wood reapers/ Blocks after applying two coats of wood primer. Hard wood Numbers Planks for Keeping Equipment in the Full Box: 940mm x 40mm x 300mmapproximately after applying two coats of black enamel paint." ( To be inspected by consignee) (ITEM UNIT IS PER PLANK)

"Cable termination including fixing terminals, fuses, LDs, Meggering of cables and recording the readings. (All Per materials for the work except cable, ARA terminal, fuses and LD's shall be supplied by the contractor). Note: Conductor Payments can be made based on the meggering records submitted." ( To be inspected by consignee)

Excavation of pit in and around the existing location boxes very carefully without damaging the working Numbers cables and shifting and turning the location boxes to clear of the infringement as instructed by the Railway representative at site. The work includes, ensuring the safety of the signalling system, releasing the cable coils to give access for shifting/turning the location boxes. Necessary masonry work and earth work in and around the location boxes to the required level shall be done as instructed by the Railway representative at site. If the existing earth connections to the location boxes are disturbed, the earth wires shall be properly reconnected. [All materials required for the work shall be supplied by the Contractor]. Shifting of apparatus case (Full)( To be inspected by consignee)

"Strengthening of foundations of signals, Full/Half location boxes up to a height of 30 cm, by carrying out the Sqm earth work around the foundation, ramming of the earth, carry out masonry work from bottom of earth work using country stones and cement masonry to prevent the earth from slipping down the bank. ( All the materials required for the above work shall be arranged by the contractor)." ( To be inspected by consignee)

Earthing and soldering of cable armour. ( To be inspected by consignee) (ITEM UNIT IS PER CABLE)

Fabrication, supply and erection of conventional Earth to Signalling/ Telecom equipments -Excavation of earth Numbers and providing earth pipe of size 50mm dia. 3.5mm thick 2.0 m. long G.I. pipe of heavy quality with masonry tub constructed around at earth locations as specified by site Engineer. Alternate layers of 30kgs-charcoal and 30kgs-common salt to be filled in the pit while closing. The pipe perforation etc., to be carried out as per drawing No. SK 10 / 10. The earth pipe to be connected to the function with cable as supplied by Railways. The reading should be painted on the masonry tub. The masonry tub of 300 mm x 300 mm x 300mm (along with Kundi) should be covered with cement slab.. (All materials to be supplied by the contractor except cable.). Note 1) Payment can be done with proper certification perticulars of earth pit by the field Officer,supervisor and Contractor same should be enclosed with measurement and Bill. 2)The Termination of GI wire with Galvanised Bolt and Nuts with washers of Size 12.5 mm. 3) 35 mm Alluminium lugs to be used for 2 Core 2.5 Sq.mm Cables with Soldering( To be inspected by consignee)

"Installation of single earth(maintenance free) including the following:- welding and fixing of copper tape Set (used as bus bar) welding of cadmium bronze cable to copper plate using material supplied vide item no. 1,2 of SPD of Sch-A . All the material supplied for mounting of copper tape, exothermic weld materials, tools and fixtures for welding copper tapes shall be arranged by contractor. a) Digging /Auguring/Boring of single earth pit of 100mm to 125 mm dia to the depth of approx. 2.8 meter. b) Insertion of 3.0 meter electrode and penetrating it at least 0.2 meter by pushing gently with sledge hammer where the natural soil is assumed. c) Filling of earth pit with earth enhancement compound (EEC) in slurry from and backfilling. d) Carrying out exothermic weld connection on single earth electrode to a copper tape of 150X25X6mm. e) Carrying out exothermic weld connection on the copper tape of 150X25X6mm on earth electrode for connecting two 35 Sq mm cables for redundancy. f) The exothermic welding material for bonding the earth system shall be procured from RDSO approved firms, which includes graphite moulds, clamps, weld metal powders. g) Digging a trench to a depth of at least 0 .5 Mtr. and run the two 35 Sq mm earth conductor (procured against supply item) from earth pit to MEEB. h) Routing and termination of two 35 sq mm earth conductors in trench from earth pit to 300X25X6mm MEEB, which is to be fixed inside the equipment room with two insulation studs. i) 300X300X300 mm (inside dimension) concrete earth pit with a concrete lid, approx 50mm thick with pulling hooks, shall be provided to cover the pit. Back side of the cover will be painted in black and date of the testing and earth resistance value shall be written." ( To be inspected by consignee)

"Erection, concreting and wiring of SM's control panel (up to 5 roads) Erection and concreting of SM's control Numbers panel on teakwood base frame 50mm x 150mm of suitable length and breadth, varnishing, termination of cables and wiring of knobs, buttons, indications, counters etc. as per the approved circuit diagram with wire PVC 16/0.2mm copper. The work includes fixing of required No. of buzzers and wiring. The termination particulars shall be painted on the back doors of the panel. (Supply of SM's control panel is not included in the schedule). [Foundation bolts and nuts with washers, concreting materials, 50mmx150mm teakwood base frame, soldering materials, buzzers to work on 24VDC and all other miscellaneous materials required for the work shall be supplied by the Contractor]." ( To be inspected by consignee)

Manufacturing and fixing of glass fronted box ( key box) made out of teak wood of size 406X254X75 mm. ( To Numbers be inspected by consignee)

Installation and wiring of token/token-less block Instrument in ASM's room with suitable foundation including Numbers fixing of LD's, terminals, fuses & earth connections and any other ancillary works. ( To be inspected by consignee) (ITEM UNIT IS PER INSTRUMENT)

Crank Handle Box/ KLCR Box for Crank Handle Providing teak wood crank handle box, fixing of LEDs, EKT, Numbers Counter, welding of EKT to Crank Handle, wiring, testing as per technical specification including concealed wiring in the wall. ( To be inspected by consignee)

Fabrication and Supply of Box suitable for 8 No's KLCRs ( To be inspected by consignee)

Supply, installation and wiring of KLCR relay 24V DC non AC immunized with 4F/4B contacts. This also Numbers includes termination of cable and required wiring in KLCR box. ( To be inspected by RDSO)

Preparation of Track Bonding Diagram on non-transparent acrylic sheet of thickness 4mm with aluminium Numbers beading and hanging support with screen printing, lettering and bonding diagram. ( To be inspected by consignee)

Preparation of Station Working Order Diagram (SWOD) on non-transparent acrylic sheet of thickness 4mm Numbers with aluminium beading and hanging support with screen printing, lettering and yard diagram. ( To be inspected by consignee)

Printing, Binding & supply of registers with latest proforma given by in-charge officer each register of 100 Numbers pages.. ( To be inspected by consignee) (ITEM UNIT IS PER REGR)

"Supply and installation of Sealed maintenance free VRLA Battery set of 60 cells 2V/200AH capacity Numbers each(stackable) in combination of 55+5 cells as per RDSO Specification No IRS-S-93/96(A) with amendment 1. Battery should be supplied with connecting link, accessories & suitably numbered in stackable racks. Warranty : 30 months" ( To be inspected by RDSO)

Fixing relay bases on the relay frames erected in Relay Room, Wiring of all types of relays by drawing various Numbers sizes of wires/multi core cable, fixing fuses, condensers, resistances, LEDs etc and wiring duly soldering the same as per approved circuit diagram, testing point to point before soldering and after soldering, bunching and lacing as per detailed technical specification. Numbered ferrules shall be provided for each wire. Different colour codes and sizes of wire to be used as per standard practice. This also includes, provision of all PVC sleeves required to be provided. Copper lugs to suit to 16/02 wire and neat bunching, lacing with Modi Nylon / Twine thread and using PVC dotted tape with buttons. This also includes soldering all the wires in the relay room with Rosin core of IS Spec.1921 ( 60 % Tin and 40% Led). Soldering should be done as per standard practice. This also includes inserting the clips, point to point testing as per the circuit diagram and plugging relays to Relay bases (except Inter-cables, relays other materials such as Rosin core, flux, nylon thread. PVC dotted tape should be supplied by the contractor). Point to point testing should be done in the presence of Engineer-in-charge as instructed in two stages, one before soldering and the other after soldering.( To be inspected by consignee) SECUNDERABAD DIVISION-S AND T/SOUTH CENTRAL RLY

Fixing of non-deteriorating fuse holders with LED indications and resistors and negative terminal strips on Numbers 6mm Hylam sheet with contractors screws, bolts and nuts. ( To be inspected by consignee)

Fixing of LEDs along with Jewels, Resistors, Sleeves duly drilling holes and soldering including drawing of Numbers wires, bunching and lacing. (All materials to be supplied by the contractor).( To be inspected by consignee)

Fixing of PVC pipes & bends, drawing of required wires through the same up to functions like control Lumpsum telephone, Dy.control telephone, magneto phones inside SM's office as per circuit diagram. This includes supply and fixing of required DPDT and rotary switches, PVC pipes and bends 25mm dia with 2mm wall thickness, Lightening dischargers and painting of particulars. ( To be inspected by consignee)

Fabrication, supply and fixing aluminium ladder of size 25 X 25 X 5mm, 200mm width, arrangements for RMT drawing various wires in the battery, equipment and relay rooms. (All material including MS angle and insulation sleave for ladder to be supplied by contractor). ( To be inspected by consignee)

Erection of CT Rack/Relay rack 1way/2way/4way with scaffolding suitably concreting tri-pod bases using J- Numbers bolts, fixing rack support of size 50 x 50 x 6 mm on to the wall. Reel insulators are to be provided for insulating the rack from the scaffolding & tri-pod bases. ( To be inspected by consignee) (ITEM UNIT IS PER ONE WAY RACK)

Cable Duct behind Relay Room/Goomties of 1.8 m dia. and 1.2 meter depth consisting of brick work of 254 Each mm thickness of proportion 1:6 with sand filling after coiling of cables. The top of sand filling covered with concreting of size 1.3 meter dia. and 200 mm depth of proportion 1:1.5:3. Outside of the duct should be plastered with cement mortar in a ration of 1: 6 to achieve smooth finishing. All materials including cement, chips of size 20 mm and second class bricks etc. to be supplied by the contractor. ( To be inspected by consignee)

Fixing of the following on Pre-erected Relay Racks Fixing of approximately 200 no's of 6 way / 1 way terminal Set block horizontally on 6mm Hylam sheets which in turn to be fixed to rack with all supports as per instructions of SSE in charge. Materials such as bolts, nuts and supporting flats to be supplied by the contractor only.( To be inspected by consignee)

Cutting and fixing of Hylam sheet of 6 mm/3mm thickness to suit to 1 way relay rack and fixing the following Lumpsum with contractors screws, bolts and nuts and fixing strips, condensers and resistances of various values - 50 No. ( To be inspected by consignee)

III) Fixing of non-deteriorating fuse holders with LED indications and resistors and negative terminal strips on Numbers 6mm Hylam sheet with contractors screws, bolts and nuts. To be inspected by consignee)

Shifting of existing working functions like signals/Shunt/ Calling on/Points/Track circuits etc. from old cable to Numbers new laid cables carefully without affecting the traffic under disconnection/blocks, This work also includes releasing the existing tail cables from the relevant gears and re- surfacing the earth excavated as instructed by Railway representative at site. ( To be inspected by consignee) (ITEM UNIT IS PER CABLE )

Carrying out of alterations to the working circuits and fixing of relays and relay groups and energization of Numbers relays as per approved circuit diagrams. (All materials such as Rosin core, flux, nylon thread, eyelets and PVC dotted tape to be supplied by contractor. Indoor cables, relays and relay groups, fuses, LEDs, Resistances will be supplied by Railways. ( To be inspected by consignee) (per sheet of circuit diagram)

Arranging of sufficient staff by contractor and giving test to the railway in charge in the following stages as Numbers per instructions. A)Stage -1: Testing of wires drawn point to point using buzzer. (Before and after soldering.)( To be inspected by consignee) (ITEM UNIT IS PER SHEET)

B)Stage -II: Making a simulation test board plywood 3mm approximately size 1.5 x 1meter. Painted according Numbers to the yard layout fixing 1 way /2-way switches in its approximate position for track circuit, point setting lamp holders and lamps. Carrying out testing using simulation board after energising of internal circuit( To be inspected by consignee) .(ITEM UNIT IS PER ROAD)

Testing to check integrity of gears (Field correspondence) i.e. One Signal Unit (with or without route)/Track Each Circuit/LC Gate/One Point machine/One Block Instrument/One Slot etc. This item will be applicable after one round of complete testing of gears by the contractor in presence of Railway Supervisor. ( To be inspected by consignee)

"Testing and commissioning the entire signalling installations jointly with the Railway representative at site at Numbers the Stations/ LC gates/IBS/Auto Signalling covered under various schedules of the Contract, and ensuring that all the signalling gears are installed and adjusted as per the existing rules. Testing and commissioning of Stations (up to 5 roads)" ( To be inspected by consignee) (ITEM UNIT IS PER STATION)

Provision of one skilled and 2 unskilled staff round the clock to attend to teething trouble of the installation Numbers along with SI/CSI after the installation has been brought into commissioning. The work includes routine maintenance, failure restoration as per the direction of the SI/CSI. ( To be inspected by consignee) (ITEM UNIT IS PER MONTH)

"For a Four-Line Station Supply of Original Tracing of Circuit Diagrams consisting of the items as mentioned Numbers below along with softcopy in CD after incorporating all the corrections. (i) Wiring Diagrams, (ii) Relay Disposition Charts (iii ) Contact Analysis and Fuse Particulars (iv) Panel Termination Chart (iv) Panel Termination Chart" ( To be inspected by consignee) (ITEM UNIT IS PER STATION )

Circuit diagrams issued by the Railways ( of A-2 size ) are to be taken on reproduction tracing film and Numbers manually entering the relay contact number and other required circuit details if any. (Reproduction tracing film and other consumables are to be arranged by the contractor.)( To be inspected by consignee) (ITEM UNIT IS Per sheet of A-2 size )

Preparation of A-3 size drawings as at site. Providing one print on tracing paper on in standard format. Numbers Drawings are to be prepared on polyester tracing film of double side 50 microns thickness. (Polyester tracing film and other consumables are to be arranged by the contractor.)( To be inspected by consignee) (ITEM UNIT IS Per sheet of A-3size )

Preparation of A-4 size drawings as at site. Providing one print on tracing paper on in standard format. Numbers Drawings are to be prepared on polyester tracing film of double side 50 microns thickness. (Polyester tracing film and other consumables are to be arranged by the contractor.) ( To be inspected by consignee) (ITEM UNIT IS Per sheet of A-4 size )

Arranging rexin cloth bound booklets and binding ( To be inspected by consignee) (ITEM UNIT IS EACH Each BOOKLET)

Releasing of existing Block Instruments (all types), Block counters, batteries, block filter, block bell equipment Numbers etc., carefully without any damage, accounting and stacking them neatly at a place as instructed by Railway representative at site. ( To be inspected by consignee)

Releasing of existing SM's control panel including base plank, and other gadgets connected very carefully Numbers without causing any damage to the panel, accounting and stacking them neatly at a place as instructed by Railway representative at site. The resultant pit in the flooring shall be removed of all cable bits, levelled and cement plastered. ( To be inspected by consignee) Total 6463907.90

Item Breakup - D-LABOUR PORTION S&T NON SOR

Running/laying of power cable /CAT cable / OFC through PVC pipes. Necessary PVC pipes will be supplied by Metre Railways.(To be inspected by Consignee)

Manufacture and supply of Tele Console Cabinet (1000X1500 mm) as per following details: a) Complete body Numbers fabricated as per drawing with 1.6mm MS Sheet. b) Double door arrangement with 1.2mm MS Sheet with locking arrangement. c) Separate box for Battery with door. d) 5mm clear acrylic sheet will be fitted in the doors. e) Equipment fixing arrangement with hinged frame in the body. f) Cable tray fixing arrangement as per drawing. g) Three point locking arrangement on one door and tower bolts on second door. Universal Lock and cam lock arrangement for battery box. h) Powder coating of all metal parts. i) PVC cable trays as per requirement assembled in position. j) DIN rails as per requirement assembled in position.(To be inspected by Consignee) SECUNDERABAD DIVISION-S AND T/SOUTH CENTRAL RLY

Supply, installation & commissioning of 1 KVA UPS with battery extender to provide backup for 2 hours as per Numbers specs.Battery Make: Exide / Amaraja / HBL (1) . Output Power Capacity 1000 VA (600 Watts) (2). Maximum Configurable Power : 1000 VA (600 Watts (3) Nominal Output Voltage: 230 V AC (4) Input Voltage: 175 %u2013 295V AC (5) Battery Type : Maintenance free Lead Acid battery. If batteries are need to be provided externally, then,batteries should be secured in suitable box for extending the backup time. (6) Backup Time Min. 2 Hours (7) Control panel Status displays for online, on battery, Replace battery and overload (8) Audible Alarm When on battery,Distinctive low battery alarm. UPS Make: APC / Numeric. MAKE: EXIDE MAKE BATTERY & UPS MAKE EXIDE OR A( Warranty Period : Upto 30 months from the date of supply) (To be inspected by Consignee)

Supply, Installation and commissioningof Computer based PassengerAddressing Sysem with Suitable Numbers drivingsoftware. Software CD and user manualshoul be supplied with each systemseperately . Spec of PC : Processor: Intelprocessore Description:Intel Core i5processore Generation: 9 or aboveOperting system: Win 10 or higher(Preloaded/Licenced ) RAM size:8GBRAM expandability:64 GB Type ofRAM : DDR4 Total HDD capacity: 512GBCache:9 MB, LED blacklit monitorsize:21.5 Internal speaker, Audio-In/Out, Headphone out, Microphone-Infeature-Yes of Dell/HP/Lenovo.Warranty:5 Years will start after completion of thework.List of locations as per thedirections of the railway officials overdivision." (To be inspected by consignee)

Supply and Installation of OFC & E1 Integrated Device with OFC ports & STM interlinking Interface Numbers (E1interface) / 12 interface Six (V.21/V.23)supporting 2W/4W & Six Quad Protection Ports (2W/4W) for individual Six E&Minterfaces suitable for up to 2U height/19 rack mountable for LVCD / Digital Axle Counter / UFSBI/Control Phoneconnectivity on Optical Fiber & E1 (STM) with Automatic Change Over features (E1 to Quad/OFC-OFC-Quad/OFC E1-Quad), Quad health indications for each E&M interface & Potential Free contacts as required by Railways & fourEthernet ports & RS232 ports integrated in the unit / Audible failure uplink resettable buzzer & Dual power supplysupport18VDC to 72 VDC. This includes supply of required optical patch cords for connecting to FDMS unit. one DCto AC adaptor to be provided. Make: MROTEK/TEAMLINK FABIO or Similar. ( TO BE INSPECTED BY RITES)

Supply and installation of 250 Watt High Wattage PA Mixer Amplifier with built in digital player .Model : SSA- Numbers 250 DP or latest of Ahuja make(To be inspected by Consignee)

Fixing of Reflex Horn /column speaker with 4 mm thickness flat angles to the post/COP available on the Numbers platform with suitable coupling arrangements and necessary fixtures as per site requirement (To be inspected by Consignee)

Cutting of trench across the platform with cutting machine, laying the cable through PVC/GI pipe and filling RMT the trench after cable laying and restoring the surface with plaster etc. or as per requirement and instructions of site incharge (PVC / GI pipe and cable will be supplied by railways) (To be inspected by Consignee)

Supply and installation o f AI based ONVIF 4MP I R bullet /Dom camera with Veri focal Lenses with required Numbers licensed video management software as per RDSO/SPN/TC/65/2021 Ver 6.0. With STQC certification MAKE: Hikvision / PRAMA/ CP PLUS/Matrix or similar.as per site requirement With suitable Housing/ enclouser. (To be inspected by Consignee)

Supply & installation of CT Boxes with wago terminals (50 pair) of WAGO make. consists of part nos:280-870 Numbers (100nos),280-374(1nos),249-116(2nos),210-229/PW11-0000 (1nos) and Metallic box for outdoor use with locking facility-1 nos.Including welding of door hinges/brackets to ensure proper alignment and rigidity. Welded portions shall be ground smooth, treated with anti-corrosive primer, and painted to match the box surface, complete in all respects. (To be inspected by Consignee)

Releasing and reinstallation of existing TIB,CIBs,CDC,PDC,UPS and its wiring and terminations and Numbers documentation of new installation as per the instructions of site engineer. (To be inspected by Consignee)

Supply and installation of Smart Industrial Grade LED TVDisplay Monitor/ LED TV 55"(Industrial grade capable Numbers of working 24x7) . Make:Samsung /Sony/LG-55UH5JHDR 4K UHD Commercial LEDTV or latest(To be inspected by Consignee)

Supply and installation of STQC certified 4 MP Bullet Camera, Vari-focal lens, Prama/Matrix or Similar as per Numbers RDSO/SPN/TC/65/2021 Ver 6.0. (To be inspected by Consignee)

Supply and installation of Smart Television Tv 32 Inch LED Backlit LCD . Make: LG (32SM5KE) /Samsung / Sony Numbers or latest .All fixing arrangements as per site requirement to be arranged by contractor.Warranty: Manufacturers warranty not less than 1 year.(To be inspected by Consignee)

Supply and erection of powder coated perforated G.I cable Tray. Size: 200mm(W) x 100mm (D) x 1.5mm (T) RMT with hinges and top cover(To be inspected by Consignee)

Supply and erection of M.S angulars asper the requirement at site and suitablefor hoding cable trays vide RMT items no: 1to 3. ( M.S. Angle material to be 40mm(w) x 3mm (Thick) ) (To be inspected by Consignee)

Supply and installation of UPS 6 KVA with 4 hours back up along with allaccessories including battery rack Numbers andconnecting cables. Any other itemsrequired for installation at site should bearranged by the contractor. Battery:12V/100AH minimum capacity. 16Number of SMF batteries. Microprocessorcontrolled High input power factor >0.95. Pure sine wave True doubleconversion technology. Self diagnosticsLarge LCD monitor 32 character withUPS operating status. High compatibilitywith generators. Smart over load & shorcircuit protection for utility / invertormode. Integelegent battery monitoring.MAKE: APC / NUMERIC/ EMERSION orlatest reputed make( TO BE INSPECTED BY RITES)

Splicing of optical fiber cable and testing per fiber ( Splicing loss should be less than 0.5db per fiber) as per Numbers site condition and ad directed by Railway officials. All machinary and material should be arranged by contractor. (To be inspected by Consignee)

Supply and installation of two Zone amplifier (200+200 watts) Make/Model:Ahuja TZA 4000EM or Higher (To Numbers be inspected by Consignee)

"Cutting of trench across /metal road / platform for laying of cable. After laying the cable,the road should be Metre filled as per surrounding and make it to original position by tar/cement etc.(Item to be inspected by Consignee)

Supply and installation of 160 Watt High Wattage PA Mixer Amplifier with built in digital player .Model : SSA- Numbers 160M or latest of Ahuja make (To be inspected by Consignee)

Supply and installation of Printed PVC Ferrule for CTR / Locatiob Box and Junction Box (Colour coding and Numbers Ferrule counting instructed as per by RLY site Engineer)(To be inspected by Consignee)

Full location Box: Supply and fixing of GI flat of size 1050x25x3mm as given in drawing no. Per Unit RVNL/S&T/SC/06/2016. to connect all cable armous to earth point with suitable nuts/bolts as given belowA) GI nuts/boltsof size 8x25mm with two flat and one spring washer of 23 set B) GI nuts/bolts of size 12x40mm with two flat and one spring washer of 02 set as per site incharge.(Per Unit = Per LB (To be inspected by Consignee)

Fabrication,Supply and errection of Powder coated Cable Supporting ladder made out of M.S flat of size 35mm Numbers width and fixing the same for 'K' Rack. The approximate size of the ladder is 2M x 0.4 M (all materials are to be arranged by the contractor.)(To be inspected by Consignee)

"Software modification in FEP of Testroom /SC. 2. Software modification in CMU to accept & transfer the Station relevant station information in data packets through a serial port to a client PC (To be inspected by Consignee)

"Preparation of station specific Train arrival & departure logics.This work includes complete alteration of Data Numbers logic at site including in Data logger(Ghatkesar,Sanathnagar,Telapur,Ramchandrapuram,Raichur,Miryalguda,Krishna,Motumari,Vihnupuram) (To be inspected by Consignee)

"Testing and commissioning of entire system at each stations and Control Room / Secunderabad. (To be Numbers inspected by Consignee)

Testing and Commissioning of Client PC at Control Room / Secunderabad. (To be inspected by Consignee)

Testing and Commissioning of Multi Port Front End Processor(To be inspected by Consignee)

"Supply, installation &commissioning of 1 KVA UPS withbattery extender to provide backupfor 2 hours as per Numbers specs.BatteryMake: Exide / Amaraja / HBL (1) .Output Power Capacity 1000 VA(600 Watts) (2). MaximumConfigurable Power : 1000 VA (600Watts (3) Nominal Output Voltage:230 V AC (4) Input Voltage: 175%u2013 295 V AC (5) Battery Type: ( which includes three nos. of 12v / 26AH maintenance free VRLA batteries , batteries should be secured in suitable boxfor extending the backup time. (6) Backup Time Min. 2 Hours (7)Control panel Status displays foronline, on battery, Replace batteryand overload (8) Audible AlarmWhen on battery,Distinctive lowbattery alarm. UPS Make: APC /Numeric. MAKE: EXIDE MAKEBATTERY & UPS MAKE EXIDE OR A( Warranty Period : Upto 30months from the date of supply)( TO BE INSPECTED BY RITES) Total 8034309.45 SECUNDERABAD DIVISION-S AND T/SOUTH CENTRAL RLY