Repair/maint to drain, bdy wall, garbage bins and fencing including cleaning of sewage lines, replacement of sewage pipe lines and certain B/R works at Fort Cantt and Zone D of Old Cantt Under GE (East) Allahabad.

Amount

Demolition of cement concrete unreinforced in ground floors and pavings not exceeding 15 cm thickness below or above ground level and rubbish removing from site complete all as specified & directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided and rubbish removing from site complete all as specified && directed.

Demolition of brick work built in cement or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing, dresssed stone work and precast concrete atrticles and removing from site complete as specified & directed.

Material & Labour PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in foundation filling or mass concrete or similar wrok complete all as specified & directed.

Material & Labour PCC 1:3:6 type C-1 using 20 mm crushed stone aggregate as in surface channel and drain or similar wrok complete all as specified & directed.

Material & Labour PCC 1:3:6 type C-1 using 20 mm crushed stone aggregate as in fixing of hold fast or fencing posts or similar wrok complete all as specified & directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified & directed

Add or deduct for each every 25mm girth or part there of over or under 30cm girth complete all as specified & directed.

Material & Labour for brick work with fly ash bricks [crushing strength not less than 75 Kg per Sqcm] straight or curved on plan exceeding 6 m mean radius built in cement sand mortar 1:4 complete all as specified & directed.

Material & Labour for brick work [Except Bricks] straight or curved on plan exceeding 6 m mean radius built in cement sand mortar 1:4 complete all as specified & directed. Note : Old bricks will be used obtained from item

Material & Labour for pre-cast reinforced cement concrete 1:2:4 type B-1 using 20 mm crushed stone aggregate as in cover slabs for man holes or drains and similar works including necessary form works or moulds and set in cement mortar 1:4 complete all as specified & directed. Note : Reinforcement shall be measured and paid separately

Material & Labour for cement concrete 1:2:4 type B-1 using 20mm crushed stone aggregate as in roof kerbs, coping, mud stops or chamfered edges or similar works including necessary form work if required complete all as specified & directed.

Material & Labour mild steel TMT bars 8-10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & directed.

Material & Labour for 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement sand mortar 1:4, finished surface even & smooth without using extra cement complete all as specified & directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding & backing complete and removing of rubbish from site complete all as specified & directed.

Material & Labour for 250 mm x 250 mm x 25 mm thick PCC coloured chequered tiles as in floor set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles over & including 20 mm thick screed bed or bedding layer in cement sand mortar in 1:6 complete all as specified & directed.

Material & Labour for Non Skid Jointless ceramic light coloured tiles 7-8mm thick [premium quality] (square or rectangular) area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm, laid in floors set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles over & including 15 mm thick Screed bed or bedding layer in cement sand mortar in 1:6 for laying of ceramic tiles complete all as specified & directed.

Cleaning of Chocked sewer line of any dia of any depth manually or through Mechanical appliances and making sewer line functional, complete including working under foul conditions and deposting the sludge rubbish etc off the premises at an isolated place not exceeding 1Km distance complete as specified & directed by Engineer-in-Charge. Note : Manholes connected with effected sewer line shall not be measured separately, if choked sewer line shall be cleaned.

Desluding / dewatering / cleaning of existing of man hole of any size and any depth by any means ie mechanically or manually operated by taking out off sludge or solid waste night soil (silt) in any proportion and silted soil from the existing man hole of any size and including working under foul condition and depositing the removed sludge rubbish etc from the premises complete all as specified & directed by Engineer-in-Charge. Note : Sludge or soil night waste soil (silt) will be disposed of the area out of premises of MOD in sealed container to a distance not exceeding 2.00 KM and deposite the same and covered the same with bleaching powder @ 1.5 Kg/Sqm over surface of sludge.

Desluding / dewatering / cleaning of existing Septic tank / sludge well any capacities by means of manually or by mechanical appliances complete including working under foul condition and removing sludge or rubbish etc in sealed container from the premises at an isolated place to a distance not exceeding 2.00 KM and covered the same with bleaching powder @ 1.5Kg / Sqm over surface of sludge complete as specified & directed by Engineer-in-Charge.

Cleaning and removing all scale and dirt, etc from PVC / RCC tanks and mouths of circulating pipe of exceeding 250 litres & not exceeding 500 ltrs capacity with following processes as described as under :- (a) First Stage : Mechanised dewatering by mechanical apparatus. (b) Second Stage : Removal of left over dirty water and sludge with special sludge removal pump. (c) Third Stage : Cleaning of wall surface, ceiling and floor by high pressure rotary water jet with the help of mechanical equipmrnt. (d) Fourth Stage : Vaccum cleaning - Removal of remaining sludge from the floor with the help of industrial vaccum cleaner. (e) Fifth Stage : Anti Bacterial Spray - Spraying non-toxic biodegradable eco-freindly anti-bacterial agent, certified by a Government approved lab, to dis-infect the tank from all harmful pathogens. The dose utilised should be as per the OECP guidelines 423 adopted . (f) Sixth Stage : UV Radiation - Treatment of inside of tank by xposing UV radiation to kill further suspended or floating bacteria. Note : Certificate to be submitted by contractor duly signed by users to claim the running payment.

Cleaning and removing all scale and dirt, etc from PVC / RCC tanks and mouths of circulating pipe of exceeding 500 litres & not exceeding 1000 ltrs capacity with following processes as described as under :- (a) First Stage : Mechanised dewatering by mechanical apparatus. (b) Second Stage : Removal of left over dirty water and sludge with special sludge removal pump. (c) Third Stage : Cleaning of wall surface, ceiling and floor by high pressure rotary water jet with the help of mechanical equipmrnt. (d) Fourth Stage : Vaccum cleaning - Removal of remaining sludge from the floor with the help of industrial vaccum cleaner. (e) Fifth Stage : Anti Bacterial Spray - Spraying non-toxic biodegradable eco-freindly anti-bacterial agent, certified by a Government approved lab, to dis-infect the tank from all harmful pathogens. The dose utilised should be as per the OECP guidelines 423 adopted . (f) Sixth Stage : UV Radiation - Treatment of inside of tank by xposing UV radiation to kill further suspended or floating bacteria. Note : Certificate to be submitted by contractor duly signed by users to claim the running payment.

Excavation in trenches not exceeding 1.5m deep & not exceeding 1.5m wide or area not exceeding 10 Sqm on plan& depth not exceeding 1.5 m in any type of soil and getting out for foundation, trenches for laying of electric cable or pipes complete all as specified & directed.

Returning, filling in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified & directed.

Removal of excavated materials (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed.

Demolition & breaking up damaged or chocked SGSW drain pipes of internal dia 150 mm and removing rubbish from site complete all as specified and directed. Note : Excavation, earth work shall be measured & paid separately.

Material & Labour for SGSW drain pipes grade 'A' laid in trenches of 150 mm Internal diameter of pipe and jointed with cement or jointing material complete all as specified & directed.

Material & Labour for SGSW drain pipes grade 'A' laid in trenches of 200 mm Internal diameter of pipe and jointed with cement or jointing material complete all as specified & directed.

Material & Labour for cement concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid & tested for 150 mm bore of pipe with cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate complete all as specified & directed.

Material & Labour for cement concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid & tested for 200 mm bore of pipe with cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate complete all as specified & directed.

Material & Labour for cast iron soil waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors for 100mm bore pipe including taking down old damaged unserviceable pipes and removing from site complete all as specified & directed.

Supply & Fixed in repair for 100mm bore cast Iron bends any radius diminishing pieces or tapers larger bore measured joint with cement joint complete all as specified & directed.

Supply & Fixed in repair for 100mm bore cast Iron branch piece single equal or unequal ordinary or inverted spigot or socket type or with parallel branch jointed with cement joint fitted with oval & access door complete all as specified & directed.

Supply & fixing in repair 500 Litre capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) hoisted and fixed in position including necessary connections to inlet / outlet & wash out pipes, including PTMT with epoxy coated aluminium rod & high density ball valve 20 mm dia screwed for iron pipe complete as specified in SSR Part-I complete all as specified & directed.

Supply & fixing in repair 1000 Litre capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) hoisted and fixed in position including necessary connections to inlet / outlet & wash out pipes, including PTMT with epoxy coated aluminium rod & high density ball valve 20 mm dia screwed for iron pipe complete as specified in SSR Part-I complete all as specified & directed.

Supply & fixing in repair 20 mm bore gun metal gate valve with iron wheel head screwed both ends complete as specified & directed.

Supply & Fixing in repair 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed [weight 210 grams] complete all as specified & directed.

Supply & Fixing in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with clamps complete all as specified & as directed.

Supply & Fixing 110 mm bore PVC (SWR) bends ISI marked with oval & accessed door of any radius jointed with cement solvent or adhesive complete all as specified & as directed.

Supply & Fixing in repair vitreous china squatting pan white orissa pattern of size 580 x 440 mm with Integral foot rests (excludig flushing cistern & flush pipe) with VC trap and make good to match with the existing surface of floor including provision of PCC 1:3:6 type C-1 using 20 mm stone aggregate as bedding and c onnection to trap outgoing & flushig pipe complete all as specified & as directed by Engineer-in-charge.

Supply & Fixing in repair position vitreous china water closet pedestal pattern (excluding flushing cistern & flush pipe) and making good to match with the existing surface of floor making connection to flushing outgoing pipe, connection to cistern and including PVC seat cover closed patteren with bottom and cover with steel CP hinges device complete all as specified & directed.

Supply & fixing in r epair PVC seat cover closed patteren with flat bottom and cover for pedestal pan with mild steel CP or aluminised hinging device complete as specified & directed.

Supply & Fixing in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolt, including securing or typing at crossings with and provision of galvanised mild steel wire, staples or steel pins complete all specified & directed. Note : Each line of wire to be measured.

Supply & Fixing rolled mild steel frame work such as grills, gratings with ends of bars shouldered and / or reveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walks railings, frame work of water tanks and similar work including traking out old rusted or damaged one complete all as specified & directed.

Taking down cement plaster on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish off the premises complete all as specified & as directed.

Material & Labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement sand mortar 1:6, finished surface even & fair complete all as specified & directed.

Material & Labour for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4, furrowing the under layer with scratching tool and further when surface is parrially green applying cement slurry on the under layer @ 3 Kg cement per square meter, top layer 15mm cement plaster 1:1/2:2 (One part Cement : 1/2 Coarse sand : 2 stone chipping of 8-10mm size) in panels with making grove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings complete all as specified & directed. Note : Cost of making grooves as per site of required pattern is included in the quoted rates.

Material & Labour for preparation of new plastered surface of walls with sand or emery paper and apply two coats of cement base paint complete all as specified & directed.

Material & Labour for preparation of old plastered surface of walls with sand or emery paper and apply two coats of cement base paint complete all as specified & directed.

Material & Labour for preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified & directed.

AMARDEEP ENTERPRISES

M/S Akhilesh Enterprises

Airways Enterprises

M/s Rahul Kumar Agrawal

M/S SANJAY CONSTRUCTIONS

gangotri enteriprises

M/S ATUL CONSTRUCTION