REPAIR TO JOINERY, PLUMBING, SANITARY FITTINGS, TILING, WALL PANELLING AND OTHER MISC WORKS UNDER ZONE-VI OF AGE B/R-IV OF GE(SOUTH) MEERUT CANTT

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exc 4.00 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed

Material and labour for factory made pressed steel frames of size 125 x 60 mm for doors with one or more rebates made out of 1.25mm thick MS sheet including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

Material and labour for factory made pressed steel frames of section 105 x 60 mm for doors with one or more rebates made out of 1.25mm thick MS sheet including fixing lugs, hinges, lock strike plate etc complete all as specified.

Supply & fixing 30mm thick flush shutter solid core construction with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fix mild steel work as in door chowkats or frames of angle or other section etc complete conforming to Fe-410-0 or 310-0 complete all as specified and directed.

Material and labour for gauzed shutter made of angle iron 35x35x5mm, 25x25x5mm and 1.5 mm thick as shown on drawing, the frame for shutter shall be of pressed steel and 10 mm square bars grill complete with fly proof wire mesh having 0.63mm nominal dia wire and 1.4 mm average width of aperture, hinges,, sliding bolt, helical spring etc including two coats of synthetic enamel paint over a coat of red oxide and including taking down old doors with any type with iron items complete all as specified and directed. (Drg is attached here with as per SK-3)

Supply and fixing 100mm long butt hinges, cold rolled mild steel, medium weight complete all as specified and directed .

Supply and fix Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 12mm, ISI marked, complete all as specified.

Supply and fix aluminium anodized handle of size 200mm, ISI marked, complete all as specified and directed.

Supply and fix 250 mm long aluminium anodised, sliding door bolts, with haps staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts, complete all as specified and directed.

Material and labour preparation of new or previously untreated steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed.

Material and labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

Supply and fix for anodised aluminium doors shutters without sash bars, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, aluminum snap beading screws suitable anodised fittings such as, hinges, handles, including anodised aluminum frame with one or more rebates including supply and fix 5 mm thick black glass and aluminium grill fixed to frame in half portion complete all as specified and directed.

Supply and fix for anodised aluminium window side hunge type with sash bars, aluminium section weighing not less than 0.55Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws suitable anodised fittings such as, hinges, handles including anodised aluminium frame with one or more retabes including supply and fix 5 mm thick black glass and complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair cast iron body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Material and labour for double action floor spring hydraulically regulated made up of minimum 1.25mm aluminium sheet foundation box main body with stainless steel cove governing pivot made or brass, other part made of mild steel heavy duty fixed in repair complete all as specified and directed.

Supply and fix Steel window box type using 'P' section comprising double frame for gauged and glazed skeleton shutter jointly with flat iron 40x3mm all around complete including hinges, handle tower bolts stops, lugs etc. Note (i) For the purpose of measurement and payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mongries shown on drgs (iii) guard bars, glazing and wire mesh shall be measured and paid for separately.

Supply and fix for factory made steel ventilators fixed type with glazing bars complete all as specified and directed

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube in opening as per specification & drawing shown on page 178 of SSR-2020(Part-II) complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to gether with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 174 of SSR 2020 (Part-II) complete all as specified & directed.

Supply and fix stainless steel butt hinges 100mm in size complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or discription) from metal/wooden frames fixed with pin, beading or oil putty complete all as specified and directed.

Supply and fix 3mm thick sheet glass ordinary quality any size and in any type in any frame and glazing with oil putty (or beading) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

Supply and fix sheet glass 3mm thick, pin headed type and glazing with oil putty in squares not exceeding 0.5 sq.m in each pane, complete all as specified and directed.

Material and labour for repair to anodised aluminium door shutters and making it serviceable condition including 5mm thick black glass necessaary joining cleats, glazing clips, ruber neoprene packing, snap beading, screws, complete all as specified and directed.

Supply and fix insulated PVC wall lining consisting of PVC insulated panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing, as shown on page No 180 of SSR 2020 (Part-II) thickness of insulated PVC wall lining 12mm including dismantling of boarding of any thickness or description all as specified and directed by Engr-in-Charge.

Material and labour for non skid joint less ceramic floor tiles (premium quality) of size 600X600X8 - 10 mm thick as in floors, etc set and jointed in neat cement slurry and pointed in white/colour cement to match including 15mm thick screed bed in cement mortar (1:6), including dismantling of old tiles complete all as specified and directed.

Material and labour for non skid glazed ceramic coloured tiles (premium quality) of size 400X400X7-8mm thick as in floors, etc set and jointed in neat cement slurry and pointed in white/colour cement to match including 15mm thick screed bed in cement mortar (1:6), including dismantling of old tiles complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles (premium quality) of size 450X300X7-8mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed in white/ coloured cement to match, laid over and including 10 mm thick backing plaster in cement mortar 1:4 including removing of old tiles complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floor, etc complete all as specified and directed.

Material and labour for 14 to 16mm thick Udaipur Green Stone, polished (table rubbed and polished) as in jambs, window cills, cooking platforms and the like, bedded over and including 10 mm thick screed in in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of stone, including rounding of edges and drilling hole for gas pipe complete all as specified and directed.

Material and labour for machine cut kota stone slab flooring 15-18mm thick laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granite finish complete over and including 15mm thick cement screed bed in CM 1:4 complete all as specified and directed.

Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.

Material and labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade wih grey cement & pigment laid over and including 25mm thick sand cushioning bed complete all as specified and directed

Material and labour for PCC 1:4:8 type D2, 75mm thick (using 40mm graded crushed stone aggregate) as in as in sub base of flooring complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-1, 75mm thick (using 20mm graded crushed stone aggregate) as in plinth protection including finished sufraces even and smooth without using extra cement complete all as specified and directed.

Material and labour for chequered cement concrete tiles 30cm x 30cm x 25 mm thick set and jointed in cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15 mm thick scred bed in cement mortar 1:6 complete all as specified and directed

Taking down cement plaster of any description from brick wall or concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Material and labour rendering 15mm thick in patches on fair faces of brick work or concrete surfaces finished even and fair on walls in cement mortar (1:4), complete all as specified.

Material and labour rendering 10mm thick in patches on fair faces of concrete surfaces finished even and smooth on ceiling /chajja in cement mortar (1:3) complete all as specified and directed.

Material and labour for three coats of white wash on newly plastered or unplastered surfaces of ceiling/chajja including preparation of surface complete all as specified and directed.

Supply and fix in repair 25mm dia mild steel curtain rod Vista pattern fancy type, as approved by GE, including brackets and fancy type end knobs, rings etc complete all as specified and directed.

Material and labour for 18/19 mm thick particle board, grade 2 quality interior grade, commercial type fixed with nails to timber frame work as in cupboard, shelves kitchen cuboard etc including taking down existing material complete all as specified and directed.

Material and labour for preparation of old white wash surface and applying one coat of white wash on ceiling surfaces complete all as specified and directed.

Supply and fix in repair mortise lock aluminium 100 mm size 4 lever with key including necessary arrangements for removal and fixng complete all as specified and directed.

Material and labour for preparation of existing old wall surface and finishing the surfaces of wall applying two coat of oil bound distemper, any colour , complete all as specified and directed.

Supply and fixing mild steel framed work such as grills, grating etc with end of bars shouldered or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-410 Gde E-310 complete all as specified and directed.

Supply and fix galvanised mild steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.14mm and including fixed with tinned tacks, wooden beading, metal frame for securing wire gauge with wire staples complete all as specified and directed.

Supply and fix as in repair galvanised mild steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.14mm and including fixed with tinned tacks, wooden beading, metal frame for securing wire gauge with wire staples complete all as specified and directed.

Material and labour preparation of new wall plastered surfaces and applying two coats of cement base paint, over a coat of cement primer complete all as specified and directed

Material and labour for reparing of old wooden doors by repairing projecting/friction, type hinges, handle, bolts etc as required and providing new as required complete all as specaified and directed

Supply & fix in repair glass corner shelf assembly fancy type made of 6 to 7 mm thick sheet glass of size 250x 250mm fixed with CP brackets complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) for hold fast pressed steel frame etc complete all as specified and directed.

Material and labour for anodised aluminium partition with/without sash bars, aluminium sections weighing 0.55 Kg/m(min) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings, including anodised aluminium frame with one or more rebates including 5 to 6 mm thick glass all fixed to frame complete as directed by Engr-in-charge.

Supply and fixing in repair 15 mm bore tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed .

All as per item No 58.00 above but for 20 mm dia complete all as specified and directed .

Supply and fixing in repair 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes complete all as specified and directed.

All as per item No 60.00 above but 75mm dia bore pipe complete all as specified and directed.

Supply & fixing 500 litres capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical, vertical in closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling water tanks and removing to store complete all as specified & directed.

Supply and fixing in repair 15mm bore pillar taps cast copper alloy ,fancy type, chromium plated ,screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipes complete all as specified and directed .

Supply and fixing in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed. Cera Cat Part No F-1014152 Pearl Cat Part No ARI 003 or Hindware Cat Part No F-330011

Supply & fix in repair brass chromium plated wall mixer suitable for both telephonic shower and overhead shower with long bend pipe complete all as specified & directed. Cera Cat Part No F-1017401 Pearl Cat Part No ARI 015 or Hindware Cat Part No F-740022

Suuply & fix in repair chromium plated angle/stop valve incl flange, any description, suitable for 15 mm bore pipe,complete all as specified. Cera Cat Part No F-2002361 Pearl Cat Part No ARI 004 or Hindware Cat Part No F-330043

Supply & fix in repair 15 mm bore bib taps, standard of PTMT any colour, high pressure screwed for iron pipe and fixed complete all as specified and directed.

Supply & fix in repair Vitreous China squatting pan Orissa pattern, size, 580x440mm, white, with integral footrest, and with 'P' or 'S' trap including connection to flushing cistern & flush pipe and making good the distrubed surfaces to match with existing surface complete all as specified and directed.

Supply & fix in repair vitreous china wash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe) including connection to outgoing pipes and flush pipe complete all as specified and directed.

Supply and fixing as in repair PVC valve less syphonic duel action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor. complete all as specified.

Supply & fix in repair white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed.

Supply and fix as in repair vitreous china wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified.

Supply & fix in repairs chromium plated shower rose with swivel joints of 75mm size complete all as specified & directed.

Supply and fix in repair chromium plated Jet spray with suitable flexible pipe to EWC for 15mm bore with fittings, complete all as specified and directed.

Supply and fix in repair chromium plated hand shower with 1.00 mtr flexible pipe for 15mm bore with fittings, complete all as specified and directed.

Supply & fix in repairs PVC connections of 450mm long Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply and fix in repairs PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

Supply and fix repiar CP towel rail brass 20mm dia 600mm long CP finish complete all as specified and directed.

Supply & fixing in rotational moulded polyethylene water storage tanks 1000 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks complete all as specified & directed.

Supply and fix in repair 20mm bore PTMT float valve with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 140gms),

Supply and fix in repair gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified and directed.

Supply & fix in repairs steel C.P. grating 100/125 mm dia waste pipe hole fitted as required at site complete all as directed

Supply and fix in repair for 15 mm bore concealed stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair including flench complete all as specified & directed.

Material and labour for rectifying the leakage of wall mixer/wash hand basin/sink mixer including replacement of brass spindle & PVC washers necessary fixtures etc complete all as specified and directed.

Supply and fix in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair.Cera Cat Part No F-2002461, Pearl Cat Part No ARI-013 or Hindware Cat Part No F-740009

Supply and fix in repair 15mm dia brass cromium plated sink mixer with swinging spout (Wall mounted model) complete all as specified and directed.Cera Cat Part No F-1017401, Pearl Cat Part No ARI 011 or Hindware Cat Part No F-740022

Supply and fix in repair brass spindlle of No 2/3/4 for CP bib taps/angle cock/pillar taps etc complete all as directed.

jitendra AND Co

SHAKTI CONSTRUCTION CO

CHAUDHARY FURNITURE HOUSE

vibha associates