Loading…
Loading…
| # | Company | Amount |
|---|---|---|
| 1 | ₹17.6 Cr 268 237 MASTER KANHAIYA LAL ROAD AISHBAGH AISHBAGH LUCKNOW UTTAR PRADESH 226004 UDYAM UP 50 0018557 | LUCKNOW | UTTAR PRADESH | 226004 | ₹17.6 Cr |
Tender Value
₹20.0 Cr
Closing Date
17 Jan 2022, 11:00 amClosed
Restoration, Renovation and Furnishing Works of Travancore Bhawan, New Delhi
NSL/CEO/TP/NIT/2021/460
NSL/CEO/TP/NIT/2021/460
Open Tender-Domestic
Miscellaneous
New Delhi, Delhi
₹11,800
Exempted
31 Dec 2021
31 Dec 2021
17 Jan 2022
17 Jan 2022
2 Feb 2022
GRAND TOTAL i/c GST 199,782,549.00
50 metres lead as per direction of Engineer- in-charge.
Demolishing cement concrete manually/ by mechanical means including disposal of
material within 50 metres lead as per direction of Engineer - in - charge.-
15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) Cum 15.00 2,007.10 30,106.50 0.00
Demolishing cement concrete manually/ by mechanical means including disposal of
material within 50 metres lead as per direction of Engineer - in - charge.-
15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) Cum 18.13 1,239.60 22,474.17 0.00
Demolishing brick work manually/ by mechanical means including stacking of serviceable
15 15.7 material and disposal of unserviceable material within 50 metres lead as per direction of
Engineer-in-charge.
Demolishing brick work manually/ by mechanical means including stacking of serviceable
16 15.7 material and disposal of unserviceable material within 50 metres lead as per direction of
Engineer-in-charge.
Dismantling doors, windows and clerestory windows (steel or wood) shutter including
17 15.12 chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
15.12.1 Of area 3 sq. metres and below Each 14.00 302.70 4,237.80 0.00
Dismantling doors, windows and clerestory windows (steel or wood) shutter including
18 15.12 chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
15.12.2 Of area beyond 3 sq. metres Each 15.00 414.55 6,218.25 0.00
Taking out doors, windows and clerestory window shutters (steel or wood) including
stacking within 50 metres lead :
15.13.1 Of area 3 sq. metres and below Each 2.00 118.30 236.60 0.00
Taking out doors, windows and clerestory window shutters (steel or wood) including
stacking within 50 metres lead :
15.13.2 Of area beyond 3 sq. metres Each 3.00 155.75 467.25 0.00
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5
metres height including stacking the material within 50 metres lead :
15.14.1 Of sectional area 40 square centimetres and above Cum 0.74 3,674.50 2,730.30 0.00
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5
metres height including stacking the material within 50 metres lead :
15.14.2 Of sectional area below 40 square centimetres RM 24.24 14.70 356.33 0.00
Dismantling steel work in built up sections in angles, tees, flats and channels including all
23 15.18 gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking Kg 16.92 4.65 78.66 0.00
within 50 metres lead.
Dismantling tile work in floors and roofs laid in cement mortar includingstacking material
within 50 metres lead.
15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 66.27 60.50 4,009.26 0.00
Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable
25 15.24 material and disposal of unserviceable material within 50 metres Cum 1.20 1,086.45 1,303.74 0.00
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable
26 15.25 material and disposal of unserviceable material within 50 metres lead. Sqm 907.32 219.75 199,383.57 0.00
Note: Utmost care should be taken by the contractor so the historic flooring below the
stone surface is not be damaged in the process of dismantling work
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster
27 15.56 including disposal of rubbish to the dumping ground within 50 metres lead. Sqm 365.05 45.05 16,445.59 0.00
Note: Utmost care should be taken by the contractor so the historic masonry underneath
the plastered surface is not be damaged in the process of plaster removal
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the
material within 50 metres lead :
Demolishing brick tile covering in terracing including stacking of serviceable material and
disposal of unserviceable material within 50 metres lead.
Demolishing mud phaska in terracing and disposal of material within 50 metres lead.
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of
31 15.52 useful materials near the site and disposal of unserviceable materialswithin 50 metres Each 4.00 744.60 2,978.40 0.00
IV Masonry Work
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in superstructure above plinth level up to floor V level.
6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 22.58 1,018.05 22,986.75 0.00
Brick work with bricks of class designation 7.5 in superstructure up to two level . Lime
mortar 1:1:1 (1 Lime putty:1 surkhi: 1 fine sand)
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse
sand), finished with a floating coat of neat cement.
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and
colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or
alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in-
. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)
11.21.1.1 Acid and alkali resistant tile Sqm 91.68 1,515.45 138,936.46 0.00
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and
colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or
alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in-
In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand).
11.21.2.1 Acid and alkali resistant tile Sqm 464.44 1,637.70 760,606.84 0.00
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved
by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement :
4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing
complete with :
11.23.1 Makrana white second quality Sqm 979.75 3,377.45 3,309,063.39 0.00
11.23.5 Udaipur green marble Sqm 110.88 2,100.40 232,892.35 0.00
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement
mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1
cement : 2 stone dust) with an admixture of pigment to match the shade of stone. -
Providing and fixing 15 mm thick Engineered wooden flooring with top layer of 3mm oak
wood sanded mat laqueed and bottom layer 10+2 mm of spruce wood of plank sizes of
190/205 mm x 2200mm h manufactured as per EN 14342:2005+A1 and certificates of
JAS2 and CE and PEFC of approved quality and manufacture, to be laid as per
manufacture specification complete as per direction of Engineer in Charge.
Providing and laying machine cut, mirror polished Marble stone flooring, in required
design (Simple geometrical, abstract etc.) and in patterns in combination with Italian
marble stones of different colours, shades and finished surface texture etc., in linear
portions of the building, all complete as per the architectural drawings, with 18 mm thick
40 11.52 stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4
coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing
with white cement slurry admixed with pigment to match the marble shade, including
rubbing, curing and polishing etc. all complete as specified and as directed by the
Engineer-in-Charge.
18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark
Emperadore etc.
Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall
lining (veneer work) including dado, skirting, risers of steps etc., in required design and
pattern wherever required, stones of different finished surface texture, on 12 mm
(average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white
cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with
pigment of matching shade, including rubbing, curing, polishing etc. all complete as per
Architectural drawings, and as directed by the Engineer-in-Charge.
18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark
Emperadore etc.
Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of
cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement
42 11.22 slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching
11.22.1 Marble tiles (polished) Raj Nagar
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey
cement slurry mixed with pigment to match the shade of the slab, including rubbing and
polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm
(average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey
cement slurry mixed with pigment to match the shade of the slabs, including rubbing and
polishing complete.
VI Door / Windows
Providing wood work in frames of doors, windows, clerestory windows and other frames,
wrought framed and fixed in position with hold fast lugs or with dash fasteners of
required dia & length (hold fast lugs or dash fastener shall be paid for separately). -
Second class teak wood
Providing wood work in frames of doors, windows, clerestory windows and other frames,
wrought framed and fixed in position with hold fast lugs or with dash
fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for
separately). - Sal wood
Providing and fixing panelled or panelled and glazed shutters for doors, windows and
clerestory windows fixing with butt hinges of required size with necessary
47 9.5 screws, excluding panelling which will be paid for separately, all complete as per direction
of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall
be paid separately)
9.5.1 Second class teak wood
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed
shutters for doors, windows and clerestory windows (Area of opening for panel inserts
48 9.7 excluding portion inside grooves or
rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to
9.7.7 Float glass panes
9.7.7.2 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). sqm 175.31 2,231.20 391,147.21 0.00
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S.
49 9.48 flats, square or round bars etc. including priming coat with approved steel primer all
9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc. Kg 619.20 197.70 122,415.84 0.00
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete
Providing and fixing bright finished brass parliamentary hinges with necessary screws etc.
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws
etc. complete :
Providing and fixing bright finished brass door latch with necessary screws etc. complete :
9.81 Providing and fixing bright finished brass handles with screws etc. complete:
Providing and fixing bright finished brass hanging type floor door stopper with necessary
screws, etc. complete.
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion,
necessary brass screws etc. to suit shutter thickness complete
Providing and fixing bright finished brass casement stays (straight peg type) with
necessary screws etc. complete :
9.86.3 200 mm weighing not less than 240 gms Each 86.00 143.20 12,315.20 0.00
VII False ceiling
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position
with necessary stainless steel screws etc.
9.3.2 Kiln seasoned and chemically treated hollock wood cum 0.25 64,332.20 16,083.05 0.00
VIII Finishing
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.
15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat
cement on the rough side of single or half brick wall.
Extra for providing and mixing water proofing material in cement plaster work in
proportion recommended by the manufacturers.
Extra for plastering exterior walls of height more than 10 m from ground level for every
additional height of 3 m or part thereof.
68 13.23 Extra for plastering on circular work not exceeding 6 m in radius:
69 13.23 Extra for plastering on circular work not exceeding 6 m in radius:
Extra for plastering done on moulding, cornices or architraves including neat finish to line
Extra for plastering done on moulding, cornices or architraves including neat finish to line
72 13.25 Extra for plastering:
13.25.1 Spherical ceiling Sqm 96.90 146.65 14,210.39 0.00
73 13.25 Extra for plastering
Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand):
13.31.1 Flush / Ruled/ Struck or weathered pointing Sqm 164.88 214.40 35,350.27 0.00
Extra for pointing on walls on the outside at height more than 10 m from ground level for
every additional height of 3 m or part there of.
76 13.18 Neat cement punning. Sqm 5.00 67.80 339.00 0.00
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to
prepare the surface even and smooth complete.
78 13.37 White washing with lime to give an even shade
13.37.1 New work (three or more coats) Sqm 2,535.84 32.45 82,288.01 0.00
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as
per manufacturers specifications :
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat
80 13.48.2 applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of Sqm 118.80 144.90 17,214.12 0.00
approved brand and manufacture
Polishing on wood work with ready mixed wax polish of approved brand and manufacture
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as
per manufacturers specifications :
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more
13.48.3 coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of Sqm 613.92 140.05 85,979.50 0.00
approved brand and manufacture
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre
and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior
83 13.48A paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or
more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior
primer applied @ 0.90 litre/10 sqm.
New work (Two or more coats applied @ 1.43 litre/ 10
13.48A.1 sqm. Over and including priming coat of exterior primer Sqm 5.00 154.45 772.25 0.00
applied @ 0.90 litre/10 sqm.
84 13.110 Finishing walls with textured exterior paint of required shade :
Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm.
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile
Organic Compound ) content less than 50 grams/ litre of approved brand and
manufacture, including applying additional coats wherever required to achieve even
shade and colour.
Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with
black anticorrosive bitumastic paint of approved brand and manufacture, over and
including a priming of ready mixed zinc chromate yellow primer on new work:
IX Repairs to the building
Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under,
including cutting the patch in proper shape, raking out joints and preparing plastering the
14.1 wall surface with white cement based polymer modified self curing mortar, including
disposal of rubbish, all complete as per the direction
of Engineer-In-Charge.
87 14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) Sqm 11.16 462.30 5,159.27 0.00
88 14.1.2 With cement mortar 1:4 (1 cement : 4 Coarse sand) Sqm 2.00 478.00 956.00 0.00
Fixing chowkhats in existing opening including embedding chowkhats in floors or walls
cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15
x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone
14.2 aggregate 20 mm nominal size), painting two coats of approved wood preservative to
sides of chowkhats and making good the damages to walls and floors as required
complete, including disposal of rubbish to the dumping ground, all complete as per
direction of Engineer-in-Charge.
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of
repaired door shutters to existing door frames, including replacement of hinges with
screws, etc. as required, all complete as per the direction of the Engineer-in-charge. (2.02
14.6 Renewing glass panes, with wooden fillets wherever necessary:
92 14.6.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) Sqm 5.00 1,351.15 6,755.75 0.00
93 14.6.2 Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) Sqm 2.59 1,654.30 4,287.95 0.00
14.8 Supplying and fixing new wooden fillets wherever necessary:
94 14.8.1 2nd class teak wood fillets RM 2.00 66.05 132.10 0.00
14.8 Supplying and fixing new wooden fillets wherever necessary:
95 14.8.2 Hollock wood fillets RM 5.00 59.35 296.75 0.00
Raking out joints in lime or cement mortar and preparing the surface for repointing or
96 14.17 replastering, including disposal of rubbish to the dumping ground, all complete as per Sqm 1,357.92 59.75 81,135.72 0.00
direction of Engineer-in-Charge.
Consolidation of woodwork with sawdust and polyester resin of low viscosity, wherein the
97 MR work needs to completed in similar application and then smoothen and finished as per Sqm 8.69 0.00 1,720.45 14,957.55
the Engineer incharge.
Repairing of the cracks and the junctions at the terraces with Cement & Latex putty, so as
98 MR to make them water tight and providing the Concave shaped Gola all along the periphery RM 225.60 0.00 63.98 14,434.34
of the terraces.
Over insulation directly providing and laying specially formulated elastomeric single‐ply 45
mil (1.2 mm) EPDM non‐reinforced (Ethylene, Propylene, Diene Terpolymer) membrane
like SURE SEAL non‐reinforced black 45 mil or approved equivalent with minimum Roll
width 6 meters. Membrane shall be laid loose. Overlap joint shall be made using
SecurTape technology. Membrane shall have minimum of 75mm side and end laps which
shall be sealed with highly formulated double sided SECUR TAPE. Membrane shall be able
to resist 40mtr. head pressure, with tensile strength of > 11.3 mpa, elongation > 500% and
water vapour diffusion of < 24'000 microns, Tear resistance to ASTM D624, Die C
dimensional change < ‐0.7%. 100% UV resistance, Ozone resistance according to ASTM
D1149, The membrane shall be taken to a height of 300mm of the parapet wall or
adjoining wall & fixed with HP fastener and sealed with Sealant and Water cutoff mastic.
The membrane shall be covered with the geo‐textile membrane for the protection of
EPDM membrane to avoid getting membrane punctured while working further.
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to
seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal &
vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S.
clamps and M.S. staircase system in the scaffolding for working platform etc. and
maintaining it in a serviceable condition for the required duration as approved and
removing it there after .The scaffolding system shall be stiffened with bracings, runners,
connection with the building etc wherever required for inspection of work at required
locations with essential safety features for the workmen etc. complete as per directions
and approval of Engineer-in-charge .The elevational area of the scaffolding shall be
measured for payment purpose .The payment will be made once irrespective of duration
of scaffolding.
Note: - This item to be used for maintenance work judicially, necessary deduction for
scaffolding in the existing item to be done.
ROUTINE MAINTENANCE WORK
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at
all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and
cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre
capacity of tank including marking the date of cleaning on the side of tank
body with the help of stencil and paint and disposing of malba all complete as per
direction of Engineer-in-Charge. (The old date already written on tank should be removed
102 14.75A with paint remover or black paint and if date is not written with the stencil or old date is Per ltr 8,000.00 0.40 3,200.00 0.00
not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any
GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and
nothing extra will be paid on this account)
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and
prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and
similar locations of required size, approved shade, colour and texture laid over 20 mm
103 8.2 thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white
cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,
moulding and polishing to edges to give high gloss finish etc. complete at all levels.
8.2.2 Granite stone slab colour black, Cherry/Ruby red
Forming groove of uniform size in plaster as per approved pattern using wooden battens,
nailed to the under layer, including removal of wooden battens, repair to the edges of
panels and finishing the groove complete as per specifications and direction of the
Engineer-in-charge :
13.73.2 20 mm wide and 15 mm deep groove RM 56.40 63.10 3,558.84 0.00
C INTERIOR FIT OUT
I Masonry and Plaster
Providing and laying water proofing treatment in sunken portion of WCs, bathroom
etc., by applying cement slurry mixed with water proofing cement compound
consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with
water proofing cement compound @ 0.253 kg/sqm. This
layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242
kg/ sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will
be allowed to air cure for 4 hours followed with water curing for 48 hours. The
rate includes preparation of surface, treatment and sealing of all joints, corners,
junctions of pipes and masonry with polymer mixed slurry.
2.34 Supplying chemical emulsion in sealed containers including delivery as specified.
106 2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% LITRE 185.00 200.90 37,166.50
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL antitermite
treatment (excluding the cost of chemical emulsion) :
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25
litres per linear metre including drilling and plugging holes etc.:
107 2.35.2.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration metre 337.00 44.70 15,063.90
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300
2.35.3 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2
(1 cement : 2 Coarse sand) to match the existing floor:
With Chlorpyriphos/Lindane E.C. 20% with 1%
FOAM CONCRETE FILLING UNDER TOILETS AND PANTRY:- Filling and compacting Foam
Concrete for raising level of toilets and pantry and finishing in a coat of lean concrete
screeding with waterproofing compound complete in all respects to take Tile
Flooring as per flooring specifications.
III PARTITIONS AND WALL CLADDING
GYPSUM PARTITIONING:- Providing and fixing partition upto ceiling height consisting of
G.I. frame and required board, including providing and fixing of frame work made of
special section power pressed/ roll form G.I. sheet with zinc coating of 120
gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having
equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the
spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50
mm length or suitable anchor fastener or metal screws with nylon plugs and the
9.105 studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm
thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing
of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along
both ends of partition fixed flush to wall with suitable anchor fastener or metal
screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to
both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling
channels at the spacing of 300 mm centre to centre.
The boards are to be fixed to the frame work with joints staggered to avoid through
cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5
mm each) to be provided at the horizontal joints of two boards, fixed to the studs
using metal to metal flat head screws, including jointing and finishing to a flush finish
with recommended jointing compound, jointing tape, angle beads at corners (25 mm x
25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per
manufacture's specification and direction of engineer in charge all complete.
75 mm overall thickness partition with 12.5 mm thick doubleskin fire rated Glass
110 9.105.1 Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: (part 3) : 1996 (Board SQM 12.00 1,797.65 21,571.80
with BIS certification marks)
Gypsum Panelling:-Providing and fixing, in position concealed G.I. section for wall
panelling using board of required thickness fixed on the ‘W’ profile (0.55 mm thick )
having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55
mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and
another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm.
Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610
mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the ‘W’
profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as
per the drawing & directions of engineer-incharge, the joints of the boards are finished
with specially formulated jointing compound and 48 mm wide jointing tape to provide
seamless finish.
9.133.3 Gypsum board conforming to IS: 2095 Part - I
Providing & Fixing Full Height Glass partition using 12mm Thk.Toughened glass
partition complete with SS/ Alloy U channel at bottom of the floor and inside the
ceiling as per manufacturer's specifications and to the satisfaction of the Engineer in
112 MR charge. (For Measurement only Installed area will be considered).The rate shall SQM 34.00 2,251.24 76,542.20
include sealing all joints with non staining clear silicon sealant/UV treated, machine cut,
machine polished edges, tapers to design.
FROSTED FILM (CRYSTAL QUALITY) :- Providing and fixing scotchcal over glass surface
113 MR with 15 yrs MCS warranty) as approval of the Architect. (Only film surface area shall SQM 22.00 319.97 7,039.36
be measured and paid).
PLYWOOD PARTITIONING- Plywood partition using 12mm fire retardant ply fixed on
both sides on aluminium Studs Frame 50mm x 50mm x 0.5mm & 50mm x 60mm x
114 MR 0.5mm as per approved sample and architectural drawings, placing the same 600mm SQM 420.00 3,398.22 1,427,251.00
c/c . Aluminium frame to be fixed to floor and RCC Ceiling using fasteners.
PLYWOOD PANELLING- Plywood panelling using 12mm fire retardant Ply fixed on one side
on Aluminium Frame 50mm x 25mm as per approved sample and architectural drawings.
Aluminium frame to be fixed to walls, floor and RCC Ceiling using fasteners.
VEENER CLADDING- Providing and Fixing 4.0 mm thick decorative /Natural Veneer as
116 MR approved by the architect/ engineer-in-charge. (BR of veneer to be taken as Rs SQM 1,215.00 2,991.37 3,634,509.24
117 13.114 Melamine polishing on wood work (one or more coat). SQM 2,415.00 118.35 285,815.25
LAMINATE CLADDING- Providing & fixing 1,0mm thick decorative Laminate sheets of
approved colour and shade on 4-6mm MDF board with 4mm wide grooves as per design
pattern, with adhesives etc. Complete with finishing of grooves and filled with matching
Providing and fixing of modular male female wooden panelling system made of copolymer
self tapping screwed into 16.8mm dia hole in panel/ frame thickness of minimum 20mm
thickness complete as per detail. The cost to include all nessesary fixtures and fittings
INSULATION- Providing and fixing thermal insulation with Resin Bonded rock wool
conforming to IS: 8183, having density 48 kg/m3,50 mm thick, wrapped in 200 G Virgin
120 12.62 Polythene Bags fixed to wall with screw, rawel plug & washers and held and in position SQM 155.00 277.90 43,074.50 0.00
by criss cossing GI wire etc. complete as per directions of Engineer-in-Charge.
SHELVES:- Providing and fixing Pre-laminated flat pressed 3 layer (medium density)
particle board or graded wood particle board IS : 3087 marked, with one side
decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823
marked, in shelves with screws and fittings wherever required, edges to be painted
with polyurethane primer (fittings to be paid separately).
Providing & fixing IInd class teak wood lipping 25 mm wide x 12 mm thick complete
with all necessary nails, hardware etc.
Providing and fixing special quality bright finished brass cupboard or ward robe locks
124 9.79 with four levers of approved quality including necessary screws etc. complete.
126 9.81 Providing and fixing bright finished brass handles with screws etc. complete:
SHUTTERS:- Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat
pressed three layer particle board or graded wood particle board IS:12823 marked,
exterior grade (Grade l Type ll), having one side decorative lamination and other side
127 9.129 balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm SQM 10.80 1,982.70 21,413.16 0.00
thick with necessary screws and bright finished stainless steel piano hinges, complete as
per direction of the Engineer-in-Charge
STORAGE CABINET FOR ELECTRICAL PANEL AND VOLTAGE STABLIZERS- Cabinet
Shutters out of 19mm Commercial Plyboard finished in 1mm Laminate of base cost Rs.
380 per sqmt. Shutters to be fixed to a frame. Rigidly fixed on both sides and top
finished in laminate. No internal carcass required. All Hinges of hettich or equivalent.
Internal Surface of the shutter in balancing white laminate. All shutters to be provided
with Stainless steel louvers at the top and bottom of the shutter as per the site
requirements and instruction of the Engineer In charge.
MDF CLADDING- P/F 4/6mm thick MDF, fixed as per detail/ drawings. Complete
129 MR Cladding to be finished in paint as per the instructions of the Engineer in charge sqm 1,220.00 0.00 1,087.32 1,326,532.67
WOODEN MOULDING- Providing and fixing on existing veneered partitions First Class Teak
wood moulding out of following Teak Wood Section. Installation to be carried out using
adhesives, headless nails. Cost to include cost of all wood, hardware adhesives complete
as per directions of Engineer-in-Charge.
132 13.68 French spirit polishing :
13.68.1 Two or more coats on new works including a coat of wood filler SQM 450.00 368.30 165,735.00
IV FALSE CEILING
WOODEN VENEER CEILING:- Providing and fixing wooden veneer ceiling by Fixing
decorative/teak Veneer on 12mm Underlay commercial Ply fixed to a subframe made
using 50mm X 50mm Kiln seasoned and chemically treated hollock wood fixed to RCC
ceiling using Fasteners at 600 mm centre to centre treated with anti - termite & fire
retardant paint. Rate to include necessary notches in frame on carrying electrical conduit
& switch boxes,light fixture ac grill etc complete.
Providing & fixing decorative Poly décor fabric Wall Paper in required locations including
134 MR finishing joitns complete as per satisfaction of engineer-in-charge; base rate of roll to be Sqm 293.00 0.00 3,518.19 1,030,828.85
taken as Rs. 3500 per roll.
WINDOW BLINDS:- Supply and Installation of Roller Blinds of approved shade and
Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets
14.28 fixed with brass screws and wooden plugs etc. wherever necessary complete.-
Providing and Installation of sheer curtains in rooms of approved shade, pattern and
color. (base rate of fabric to be taken as Rs. 400 per sqm)
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI
(solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on
waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the
138 12.55 ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & SQM 1,233.65 1444.90 1,782,500.00
marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts
complete, including providing skirting upto 150 mm height along the parapet walls in the
Providing and laying integral cement based water proofing treatment including
preparation of surface as required for treatment of roofs, balconies, terraces etc
consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with
water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge
over the RCC slab including adjoining walls upto 300 mm height including cleaning the
surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size
with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer- in-charge over 20 mm thick
layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope
and treating similarly the adjoining walls upto 300 mm height including rounding of
junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/
sqm of cement admixed with water proofing compound conforming to IS : 2645 and
approved by Engineer-in-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4
coarse sand) admixed with water proofing compound conforming to IS : 2645 and
approved by Engineer-in-charge including laying glass fibre cloth of approved quality in
top layer of plaster and finally finishing the surface with trowel with neat cement slurry
and making pattern of 300x300 mm square 3 mm deep.
140 22.7.1 SUB HEAD
average WATERof
thickness PROOFING
120 mm and minimum thickness at khurra as 65 mm. SQM 931.20 1,522.95 1,418,171.04
D LANDSCAPE WORKS
I Site Cleaning
Surface dressing of the ground including removing vegetation and inequalities not
141 2.28 exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. 0.00
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and
saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal
of rubbish up to a distance of 50 m outside the periphery of the area cleared
Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery
of the area cleared.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in
foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including
144 2.8.1 dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the Cum 30.29 286.85 8,689.83 0.00
excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -
All kinds of soil
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over
areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including
getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed
by Engineer-in-charge.- All kinds of soil
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations
146 2.25 etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by Cum 238.00 253.95 60,441.14 0.00
ramming and watering, lead up to 50 m and lift upto 1.5 m.
Excavating, supplying and filling of local earth (including royalty) by mechanical transport
upto a lead of 5km also including ramming and watering of the earth
in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
Supplying and filling in plinth with sand under floors, including watering, ramming,
consolidating and dressing complete.
III Dismantling and demolition
Demolishing dry brick pitching in floors, drains etc. including stacking serviceable material
and disposal of unserviceable material within 50 metres lead :
Demolishing brick work manually/ by mechanical means including stacking of serviceable
150 15.7.4 material and disposal of unserviceable material within 50 metres lead as per direction of Cum 21.11 1,698.45 35,861.07 0.00
Engineer-in-charge. In cement mortar
Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m
(stacks of cleaned bricks shall be measured):
Demolishing cement concrete manually/ by mechanical means including disposal of
152 15.2.1 material within 50 metres lead as per direction of Engineer - in - charge. - Nominal Cum 1.08 2,007.10 2,167.67 0.00
concrete 1:3:6 or richer mix (i/c equivalent design mix)
Demolishing cement concrete manually/ by mechanical means including disposal of
153 15.2.2 material within 50 metres lead as per direction of Engineer - in - charge. - Nominal Cum 3.00 1,239.60 3,718.80 0.00
concrete 1:4:8 or leaner mix (i/c equivalent design mix)
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the
material within 50 metres lead of:
155 15.28.2 Asbestos cement sheet sqm 20.40 63.75 1,300.50 0.00
Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth
work and dismantling of concrete etc. in base of:
Dismantling barbed wire or flexible wire rope in fencing including making rolls and
stacking within 50 metres lead.
Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal
158 15.59 of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in-charge. Cum 3.00 347.90 1,043.70 0.00
Taking out existing CC interlocking paver blocks from footpath/ central verge, including
removal of rubbish etc., disposal of unserviceable material to the dumping ground, for
which payment shall be made separately and stacking of serviceable material within 50
metre lead as per direction of Engineer-in-Charge.
Taking out existing kerb stones of all types from footpath/ central verge, including
removal of mortar etc., disposal of unserviceable material to the dumping ground, for
which payment shall be made separately and stacking of serviceable material within 50
metre lead as per direction of Engineer-in-Charge.
Careful dismantling of tile work in floors and roofs laid in cement mortar including
stacking material within 50 metres lead.
161 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 39.84 60.50 2,410.32 0.00
IV Concrete work
Providing and laying in position cement concrete of specified grade excluding the cost of
centering and shuttering - All work up to plinth level :
1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).
1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)
Providing and laying in position ready mixed plain cement concrete, with cement content
as per approved design mix and manufactured in fully automatic batching plant and
transported to site of work in transit mixer for all leads, having continuous agitated mixer,
manufactured as per mix design of specified grade for plain cement concrete work,
including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the
4.20 cost of centering, shuttering and finishing, including cost of curing, admixtures in
recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,
improve workability without impairing strength and durability as per direction of the
Engineer - in - charge. Note : 1) Excess/less cement used than specified in this item is
payable/ recoverable separately.
4.20.1 All works up to plinth level.
164 4.20.1.1 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) Cum 2.00 8,033.20 16,066.40 0.00
165 4.20.1.2 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum). Cum 1.50 8,174.75 12,262.13 0.00
Centering and shuttering including strutting, propping etc. and removal of form work for :
4.3.1 Foundations, footings, bases of columns, etc. for mass concrete. Sqm 10.00 307.95 3,079.50 0.00
Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc.
as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3
coarse sand), including the cost of required centering, shuttering complete. 1:1½:3 (1
Cement: 1½ coarse sand(zone-III) :
167 4.6.1 3 graded stone aggregate 20 mm nominal size). Cum 0.38 8,130.65 3,048.99
Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape
including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes
40 mm dia and 450mm long with 150x150x6mm M.S. plate welded at bottom and
168 4.9 embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 Each 2.00 785.70 1,571.40 0.00
graded stone aggregate 20 mm nominal size), including necessary excavation of size
250x250x450mm deep for the same in bitumen/ concrete pavement at specified spacing.
Providing and laying 60mm thick factory made cement concrete interlocking paver block
of M -30 grade made by block making machine with strong vibratory compaction, of
169 16.68 approved size, design & shape, laid in required colour and pattern over and including Sqm 5,200.00 951.00 4,945,200.00 0.00
50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all
complete as per the direction of Engineer-in-charge.
Providing and laying at or near ground level factory made kerb stone of M-25 grade
cement concrete in position to the required line, level and curvature, jointed with cement
mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves
(thickness of joints except at sharp curve shall not to more than 5mm), including making
drainage opening wherever required complete etc. as per direction of Engineer-in-charge
(length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone
shall be approved by Engineering-charge).
Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre
polished machine cut granite stone of required size and shape of approved shade, colour
and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm
171 16.87 thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints
with white cement mixed with matching pigment, epoxy touch ups etc. complete as per
direction of Engineer-in-Charge.
16.87.1 With granite stone of area less than 0.50 sqm. Sqm 100.00 4,256.30 425,630.00 0.00
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching
plant. The ready mixed concrete shall be laid and finished with screed board vibrator ,
172 16.75 vacuum dewatering process and finally finished by floating, brooming with wire brush etc. Cum 26.35 8,277.55 218,130.00 0.00
complete as per specifications and directions of
Engineer-in-charge. (The panel shuttering work shall be paid for separately).
Laying water bound macadam sub-base with brick aggregate and binding material, earth
etc. including screening, sorting and spreading to template and consolidation with light
power road-roller etc. complete.(payment for brick aggregate and moorum etc. to be
made separately) -
16.5.1 Over burnt (Jhama) brick aggregate 120 mm to 40 mm Cum 390.00 725.60 282,984.00 0.00
Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick
nominal size including spreading, well ramming, consolidating and grouting with jamuna
sand, including finishing smooth etc. complete as per direction of Engineer-in-charge.
Providing and laying at or near ground level kerb stone of local stone in position to the
required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse
sand), including making joints with or without grooves (thickness of joints except at sharp
curve shall not to more than 5mm), including making drainage opening wherever required
complete etc. as per direction - 100x250mm in red sand stone
Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement
176 11.1.2 mortar, including filling the joints with same mortar, with common burnt clay non modular Sqm 10.00 898.20 8,982.00 0.00
bricks: 1:6 (1cement : 6 coarse sand)
Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed
177 11.2 of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay Sqm 5.00 733.30 3,666.50 0.00
non modular bricks.
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement
mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1
cement : 2 stone dust) with an admixture of pigment to match the shade of stone.
Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick
in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with white cement
mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the
stone shade- red sandstone
Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick
bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement
180 7.38 with an admixture of pigment to match the stone shade. 1 8mm thick (mirror polished
and machine cut edge), Granite stone of any colour and shade
7.38.1 8mm thick (mirror polished and machine cut edge)
7.38.1.1 Granite stone of any colour and shade Sqm 100.00 2,675.70 267,570.00 0.00
VI Horticulture
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of
serviceable materials and then disposing of surplus soil, by spreading and neatly levelling
within a lead of 50 m and making up the trenched area to proper levels by filling with
earth or earth mixed with
sludge or / and manure before and after flooding trench with water (excluding cost of
imported earth, sludge or manure).:
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over
areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan), including
disposal of excavated earth, lead up to 50 m and lift up to 1.5 m,as per directions of
Engineer in Incharge.
Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead
183 2.2 complete (earth measured in stacks will be reduced by 20% for payment). cum 1,300.00 515.60 670,280.00 0.00
Supplying and stacking sludge at site including royalty and carriage upto 5 km lead
complete (sludge measured in stacks will be reduced by 8% for payment).
Supplying and stacking at site dump manure from approved source, including carriage
2.4 upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment)
185 2.4.1 Screened through sieve of I.S. designation 20 mm cum 300.00 254.15 76,245.00
186 2.4.2 Screened through sieve of I.S. designation 16 mm cum 200.00 290.70 58,140.00
187 2.4.3 Screened through sieve of I.S. designation 4.75 mm cum 200.00 319.90 63,980.00
`88 2.5 Rough dressing the trenched ground including breaking clods. sqm 600.00 1.50 900.00 0.00
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water
including disposal of uprooted vegetation.
190 2.7 Fine dressing of the ground. sqm 600.00 3.70 2,220.00 0.00
Spreading of sludge, dump manure and/or good earth in required thickness as per
191 2.8 direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid cum 2,800.00 52.35 146,580.00 0.00
Mixing earth and sludge or manure in the required proportion specified or directed by the
Officer-in-charge
Grassing with selection No. 1/ Doob grass including watering and maintenance of the lawn
for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing
including supplying good earth, if needed (the grass and good earth shall be paid for
2.10.1 In rows 5 cm apart in both directions sqm 400.00 17.70 7,080.00
Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing
with sludge or manure, mixing the same with forked soil, watering and maintaining the
lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for
mowing and disposal of rubbish as directed, including supplying good earth if needed but
excluding the cost of sludge or manure (the good earth shall be paid for separately).
Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing
all weeds and other growth with roots by forking repeatedly, breaking clods, rough
195 2.12 dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine sqm 961.00 60.95 58,572.95
dressing for planting new grass, including disposal of all rubbish with all leads and lifts.
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching
the excavated base to a further depth of 30 cm, refilling the excavated earth after
breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked
volume of earth after reduction by 20% : one part of stacked volume of sludge or manure
196 2.13 after reduction by 8%), flooding with water, filling with earth if necessary, watering and cum 500.00 222.85 111,425.00
finally fine dressing, leveling etc. including stacking and disposal of materials declared
unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50
m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with
manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after
reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding
with water, dressing including removal of rubbish and surplus earth, if any, with all leads
and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately)
197 2.14.2 Holes 90 cm dia, and 90 cm deep each 60.00 143.10 8,586.00
Filling mixture of earth and sludge or manure in the desired proportion in trenches,
199 2.20 flooding with water and leveling (cost of supplying earth and sludge or manure and mixing cum 1,200.00 18.25 21,900.00
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable
2.57 material’s as per direction of officer in charge (excluding cast of plant & water)
202 2.57.3 Hedge Plant /Ground cover each 450.00 2.45 1,102.50
Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag
of size 25 cm as per direction of the officer-in-charge.
Providing and stacking of Mangifera indica (Mango-grafted ) of height 60-75 cm. in big
poly bag of size 25 cm as per direction of the officer-in-charge.
Providing and stacking of Cassia fistula (Amaltash) of height 120-135 cm. in big poly bags
of size 25 cm as per direction of the officer-in-charge.
Providing and stacking of Saraca indica (Sita Ashok) of height 105-120 cm. in big poly bags
of size 25 cm as per direction of the officer-in-charge.
Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags
of size 25 cm as per direction of the officer-in-charge.v
Providing and stacking of Michelia champa (Golden Champa) of height 90- 105 cm. in
earthen pots of size 25 cm as per direction of the officer-in-charge.
Providing and stacking of Pterospermum acerifolium (Kanak Champa) of height 150-165
209 7.78 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. each 6.00 65.00 390.00
Providing and stacking of Alstonia scholaris of height 150-165 cm. in bag of size 25 cm as
per direction of the officer-in-charge.
Providing and stacking of Eugenia jambolana (Jamun) of height 150-165 cm. in big poly
bags of size 25 cm as per direction of the officer-in-charge.
Providing and stacking of Terminalia arjuna of height 150-165 cm. in big polybags of size
25 cm as per direction of the officer-in-charge.
Providing and stacking of plant Canna dwarf of height 25 to 30 cm., 2 to 3 suckers in
213 4.89 earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in- each 300.00 35.90 10,770.00
Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring,
Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi, Paratha,
214 9.4 Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 each 400.00 40.00 16,000.00
branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-
Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh
215 6.12 and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer- each 600.00 20.00 12,000.00
Providing and stacking of Hibiscus rosasinensis of height 45-60 cm. with 3-4 branches in
earthen pots of size 20 cm as per direction of the officer-in-charge.
Providing and stacking of plant Mogra of height 25 to 30 cm., 2 to 3 branch in earthen
217 4.88 pots of size 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. each 53.00 46.15 2,445.95
Supplying & Stacking of Selection No.1/doob grass at site fresh & free from weeds having
218 2.35 proper roots in green including loading, unloading, carriage and all taxes paid etc.and as sqm 50.00 50.80 2,540.00
per direction of officer in charge.
Half brick circular tree guard in bricks, internal diameter 1.25 metre and height 1.2 metre
above ground and 0.20 m below ground, bottom two courses laid dry and top three
courses in cement mortar 1:6 (1 cement : 6 fine sand) and the intermediate courses being
in dry honey comb masonry as per design complete:
219 2.15.1 With common burnt clay F.P.S. (non modular) bricks of class designation 5.0 each 45.00 1,626.45 73,190.25
Relocation of existing tree- including careful excavation of plant root bulb and relocating it
to its desired location as per planting plan including excavation , supply of sweet soil
manure etc Note: Plant should be bodily lifted with as many roots as possible and taken
to the new position immediately. Ball of earth surrounding the root should be also be
lifted. Cover the root ball with damp material which will retain moisture (burlap, peat
moss, canvas, plastic, etc.) until planting. Plastic should only be used in shaded areas for
less than a day or heat injury and/ or root suffocation may occur.
VIIIRepairs to building
Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with
221 14.76 earth etc. and disposal of same, all as per the direction of Engineer-incharge. Each 5.00 89.45 447.25 0.00
Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated
high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000
litres suction capacity and 6000 litres water jetting tank capacity including skilled
222 14.77 operator, supervising engineer etc. for cleaning and partial desilting of manholes and RM 100.00 285.90 28,590.00 0.00
dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to
another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto
Providing, fixing, testing & commissioning of Clear Cartridge Filter Pump for Above Ground
Pools, 1500 GPH Pump Flow Rate, 110-120V with GFCI
Providing, fixing, testing & commissioning of sprinkler nozzle for fountain/ water features
SITC for Light poles with fixtures : Light fixture IP65 post top lantern with symmetric light
225 MR distribution and limited upward with suitable mounting pole - 3 m High , rust resistant, Each 40.00 0.00 18,230.21 729,208.28
stainless steel complete
SITC for Landscape/ tree uplighter: Description: Led,12-Watt COB Garden Spike
SITC for Landscape/ Garden Spike: 6W LED Landscape Spotlight RGB Color Changing 240V
Outdoor Waterproof
SITC for Bollards: LED150, Warm White, PSU 220-240V
229 MR SITC for under water lights: IP 68, 6 x 2W / 6 x 3W LED, 3000K / RGB Each 10.00 0.00 7,384.97 73,849.68
230 MR SITC for boundary wall and gate top light : IP 65, 2 x 6W LED Each 20.00 0.00 10,217.62 204,352.47
231 MR SITC for ceiling Fan - 1200 mm sweep, 40 W , light coloured. Each 2.00 0.00 3,603.37 7,206.75
232 MR SITC for Exhaust Fan - 250 mm sweep, plastic body Exhaust Fan Each 2.00 0.00 1,439.93 2,879.87
233 MR SITC for Ceiling light - 5 W LED Light Panel Each 8.00 0.00 377.69 3,021.50
XI Miscellaneous
Painting road surface marking with adequate nos of coats to give uniform finish with
ready mixed road marking paint conforming to IS : 164, on bituminous surface in
white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign
material etc. complete -
16.48.1 New work (Two or more coats). Sqm 63.00 239.95 15,116.85 0.00
Providing as installing AUTOMATIC Boom Barrier for as per following specifications :
The boom barrier should be of 5mtr width and height should be adjustable as per site,
with opening time of not more than 2-4 seconds, with loop controllers, Sensors, boom
controller, weatherproof exteriors armed manual override switch along with Remote
operation for VIP movement. The boom should also have the option to be operated
automatically after showing the Access card.
The technical specification for Boom barrier as follows:
1) The Booms shall be extruded aluminium with octagonal profile (straight and
articulated) shall be the structure of the profile to ensure the stability against winds &
better view when compared to Round & Rectangular profiles.
235 MR 2) IP rating should be IP 65 with outdoor Weather Proof Housing. All Housing and internal Nos 2.00 0.00 220,996.10 441,992.19
parts will be rust &
corrosion free metals or alloys of high strength with suitable Epoxy coating as applicable.
3) Housing should be powder Coated RAL & Boom Powder Coated White with Red
reflective strips with IP65
4) Input cable will be in the scope of bidder. Power supply will be given at a fixed point, 50
mtr. away from the system.
5) All power cables should be of copper and armored.
Providing and fixing in position bollards (200mm X 200mmX 900 mm ) designed in Agra
236 MR red sandstone as/ specification including excavation, concrete base, fixing and finishing Nos 4.00 0.00 1,654.47 6,617.88
Supply and installing in position of Traffic Plastic Bollards as per specifications - Virgin
plastic, UV resistant, 0.9 mts high, Single piece molded including base and board; seamless
237 MR rugged design, with reflective bands, heavy pedestal (300 X 300 X 50 mm approx ) with Nos 2.00 0.00 6,401.63 12,803.25
provision for grouting to base, including PCC (1:4:8) base for installing complete
238 MR Supply & placing of Traffic Steel Bollards as per specifications Nos 2.00 0.00 4,413.19 8,826.39
Designing, Supply & Installation of Artwork / Murals / Paintings / Sculpture work for
Newly constructed
Metal Sculpture permanent in nature.
Concept Creation
Creating design and creation of Art work concept on given subject. With initial visit to site,
preparation of various designs with different material, providing the samples, layout for
approval, improvisation in short listed creative’s and making of final layout for final
production by enlargement of drawing as per ratio of actual size, to prepare detailed
working shop drawings (full scale) based on the Concept drawings / Views / site
conditions, display of actual size dummy /mock up Fabricated in sun board with digital
print for client approval
Artwork Execution
240 MR Execution of approved design in SS 316 grade steel /SS 304 grade SS (1.5 mm-2 mm thick) CUM 6.00 114,637.00 687,822.00
/STONE/ALLUMINUM /MIXED MEDIA METAL pu colored (IF REQUIRED)antique as per
approved finish (mrf/akzo nobel) and protected against discoloration by sealing it with top
coat of Mrf/Akzo nobel clear Pu. Proper support system will be given as per approved
shop drawing, to withstand high wind pressure. The sculpture will be free from any
Undulation /Dent unless it is part of the design. The cost is inclusive of transport/packing
and installation of the same at site. Fastener/screws hilti or equivalent company.
The rate shall be inclusive of all material, labor, machinery, tools, tackles, and scaffolding
etc for all heights, all levels.
Hand painting directly on wall
Concept Creation
Creating design and creation of Art work concept on given subject. With initial visit to site,
preparation of various designs with different material, providing the samples, layout for
approval, improvisation in short listed creative’s and making of final layout for final
production by enlargement of drawing as per ratio of actual size, to prepare detailed
241 MR working shop drawings (full scale) based on the Concept drawings / Views / site SQM 22.00 16,140.00 355,080.00
conditions, display of actual size dummy /mock up Fabricated in sun board with digital
print for client approval.
ARWORK EXECUTION
Towards the cost doing hand painting using artist quality
colors by qualified artists and protected by pu coating (mrf/akzonobel) all under the
watchful eyes of expert artist
FIBERGLASS SCULPTURE .
Concept Creation
Creating design and creation of Art work concept on given subject. With initial visit to site,
preparation of various designs with different material, providing the samples, layout for
approval, improvisation in short listed creative’s and making of final layout for final
production by enlargement of drawing as per ratio of actual size, to prepare detailed
working shop drawings (full scale) based on the Concept drawings / Views / site conditions
,Display of actual size dummy /mock up Fabricated in sun board with digital print for client
Artwork Execution
Scope of work includes clay modeling/dye /fiberglass casting and protective pu coating
and installation at site .
FIBERGLASS mural
Concept Creation
Creating design and creation of Art work concept on given subject. With initial visit to site,
preparation of various designs with different material, providing the samples, layout for
approval, improvisation in short listed creative’s and making of final layout for final
production by enlargement of drawing as per ratio of actual size, to prepare detailed
working shop drawings (full scale) based on the Concept drawings / Views / site conditions
243 MR ,Display of actual size dummy /mock up Fabricated in sun board with digital print for client SQM 20.00 54,500.00 1,090,000.00
Artwork execution
Towards the cost of making fiberglass mural including
clay modeling/dye fiber glass casting, hand painting and
protective pu coating(akzo nobel/sirca) all under the
watchful eyes of expert artist
Mixed media mural
Wood/metal/fiberglass/terracotta /tiles or anything other
medium artist find suitable as long as it is permanent in nature.
Concept Creation
Creating design and creation of Art work concept on given subject. With initial visit to site,
preparation of various designs with different material, providing the samples, layout for
approval, improvisation in short listed creative’s and making of final layout for final
production by enlargement of drawing as per ratio of actual size, to prepare detailed
244 MR working shop drawings (full scale) based on the Concept drawings / Views / site conditions SQM 19.00 85,952.00 1,633,088.00
,Display of actual size dummy /mock up Fabricated in sun board with digital print for client
Artwork execution
Towards the cost of making 3D relief mural in approved
medium(Wood/metal/fiberglass/terracotta /tiles or anything other medium artist find
suitable as long as it is permanent in nature.) and protective pu coating(akzo nobel/sirca)
all under the watchful eyes of expert artist.
Canvas paintings (oil /acrylic medium)
Concept Creation
Creating design and creation of Art work concept on givensubject. With initial visit to site,
preparation of various designs with different material, providing the samples, layout for
approval, improvisation in short listed creative’s and making of final layout for final
production by enlargement of drawing as per ratio of actual size, to prepare detailed
working shop drawings (full scale) based on the Concept drawings / Views / site
conditions, display of actual size dummy /mock up Fabricated in sun board with digital
print for client approval
ART WORK EXECUTION
Towards the cost of doing canvas PAINTING by qualified artist including frame and
installation at site
Providing and fixing in position wooden frame pergola (2.4 m wide and 2.4 m high) as per
246 MR design, complete with excavation, base, metal plates, screws/ bolts and finishing with wax RM 30.00 0.00 60,350.72 1,810,521.72
polish . - Sal Wood
Supply, installation, testing and commisssioning of 50KLD sewage treatement plant
comprising of screen chamber, sewage equalization tank, MBBR FAB) tanks, settling/
clarification tank, filtration through MGF & ACF, filter feed tank, effluent transfer pumps,
filter feed pumps, air blowers and diffusers, filter press, filter press feed pump, dosing
tanks and dosing pumps, rota meter and water flow meter (mechanical), piping, valves,
electrical panel, ultra filtration, ozonator, etc, complete as required and instruction of
architect/ engineer-in-charge.
The sewage discharge standards after treatment shall be as follows-
BOD5 - less than 50 Mg/L
TSS - less than 100 Mg/L
COD - less than 250 Mg/L
Oil & Grease - Less than 5 Mg/L
The sewage discharge standards after ultra filtration treatment shall be as follows-
BOD5 - less than 10 Mg/L
TSS - less than 10 Mg/L
COD - less than 50 Mg/L
Designing, providing, installation and fixing of walls made out of GI Steel Sheet 0.5MM -
EPS - Steel composite sand coated insulated sandwich panels with toughned groove
locking systems complete as per directions of engineer-in-charge/ Architect.The E.P.S.
used as the core will be self extinguishing type. The overall thickness of the wall shall not
be less than 72mm. The item to include all nessesary hardware, fittings and fixtures
required. The item to also include making nessesary cut-outs for doors, windows,
ventilators, etc with complete sub-frame and finishing.
Desiging, Providing, installation and fixing of roof Puff panels made up of 50+80mm thick
composite PUF panels sandwiched between PPGI 0.5mm Sheets including all required
necessary hardware, fittings and fixture. The outer skin of trapezoidal PPGI sheet with
depth of crest -28-30mm. Pitch 195-200mm trapezoidal sheet & inner skin micro riving
PPGI sheet & minimum 50mm thick layer of rigid CFC free polyurethane foam of density of
249 MR 40±2 Kg/m3 as insulation. The color of PPGI sheetto be as per approval of engineer-in- sqm 337.16 0.00 3,417.47 1,152,217.66
charge/ Architect. The gaps between puff panels to be sealed as per manufacturers
specifications to make it air and water tight to prevent the entry of dust and water
seepage in case of extreme weather conditions.
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in
250 10.25 position and applying a priming coat of approved steel primer using structural steel etc. as
10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works KG 800.00 142.30 113,840.00
VASTU MANDAL arc hitec ts, interior d esig ners
F-328, Old MB Road . Lad o Sarai. Mehrauli, New Delhi 110030
Telfax 41665455 Email :vastumand al@g mail.c om
ABSTRACT for ELECTRICAL works– Travancore House
S.No DSR No. Description Unit Qty Rate DSR Amount MR Amount
Supply, installation, testing, commissioning and programming of following items-
1 MAIN PANEL,UPS INPUT/OUTPUT PANEL
Supply,installation,testing and commissing of 3phase and neutral 415V 4 wire free
standing floor mounted indoor MV panel made out of 14 SWG sheet after seven
tank process and painting with epoxy powder coating MV electrical panel shall be
dust and vermin proof ,hinged and locable doors.The panel shall consist of suitable
rating TPN bus bar at the rating of 0.8A /SQMM Supported by DMC/SMC insulator
and color coded with heat shrinkable sleeves. Metering shall be provided as
specified .The panel shall have short circuiting with standing capacity of minimum
36KA and consist of the switch gear as mentioned below .The panel shall got
fabricated from manufacturer with CPRI test certificate .The panel shall be mounted
on U channel including supply and fixing of the same.(including Capacitor banks)
Main LT Panel_Location As per site
1000 Amps 4P 36KA ACB with OverLoad, Short circuit & Earth Fault Protection with
complete all acessories. -1No._Transformer
800 Amps 4P 36KA ACB with OverLoad, Short circuit & Earth Fault Protection with
complete all acessories. -1No._DG-500 kVA
200 Amps 4P 36KA MCCB with OverLoad, Short circuit & Earth Fault Protection +
− 200 Amps 4P AC-3 Duty Power contactor with complete all acessories. -1No._DG-
200 Amps 4P 36KA MCCB with OutProtection + 200 Amps 4P AC-3 Duty Power
contactor with complete all acessories. -Bus Coupler
PLC based Load Manager suitable for 1 No 630 kVA Transformer, 1 No 500 kVA DG
− & 1 No 125 kVA DG.Interlocking shall be done as shown in SLD & complete with
control wiring+1set 1kVA UPS.
− Spreaders-2Sets.
− Extended Rotary Operating Mechanism.-2Sets
Metering and Protection .
− Digital V A F Meter with built in Selector Switch+3nos 1000/5ACTs, CT shorting links+
3nos 800/5ACTs, CT shorting links + 3nos 200/5ACTs, CT shorting links + 1no
1000/5ACTs and R/Y/B LED indicating lamps and control SP MCBs.-1Set along with
each incomer and bus coupler.
1N0 1000/5A CT for APFCR Relay with A/M switch -1No.
− 315 Amps 36KA FP MCCB_ -3Nos.
− 100 Amps 36KA FP MCCB_ -2Nos.
− Spreaders-5Sets.
Extended Rotary Operating Mechanism.-5Sets
− 63 Amps FP MCB_C curve -12Nos.
− 40 Amps FP MCB_C curve -6Nos.
12 Step Automatic Power Factor Correction Relay (Digital) with A/M selector
− 80 Amps 36 kA TP MCCB - 4 Nos..
− 63 Amps 36 kA TP MCCB - 4 Nos..
− 32 Amps 36 kA TP MCCB - 4 Nos..
− 25 kVAR heavy duty capacitor _4 Nos.
− 15 kVAR heavy duty capacitor _4 Nos.
− 25 kVAR heavy duty capacitor _4 Nos.
− 25 kVAR capacitor duty Contactor with 220 V AC Coil_4 Nos
− 15 kVAR capacitor duty Contactor with 220 V AC Coil_4 Nos
− 10 kVAR capacitor duty Contactor with 220 V AC Coil_4 Nos
− ON / OFF LED Indicating Lamps _12Sets
− ON/ OFF Push Buttons_12Sets
− A/M Selector Switch_1 No
− Control S/P MCB (2/4 A)_12 Nos
− Neutral Links_12Nos
− Control Blocks_12 Nos
Enclosure suitable for above with 1250A +250a TPN 415V 50Hz Electrolytic grade AL
- conductor Busbar with 100% neutal& Non adhesive PVC insulated heat shrinkable
sleeves, Internal Wiring, Terminals, etc.as required._1Set
- SITC of the Main Panel as mentioned avove SET 1 1708074.99 1708074.99
2 Supplying the following MCBs in sheet steel enclosure. For Ups Input & Output
63A 4P MCB or 100 A MCCB in sheet steel enclosure surface mounted on the wall
along with incoming & outgoing Cable Box, suitable for Termination of Aluminium / No. 2 6238.17 12476.35
Copper Cable. (For Ups Input )
UPS Output panel
- 100 A 4P Onload changeover switch +100 A 4P MCCB in sheet steel enclosure
surface mounted on the wall along with incoming & outgoing Cable Box, suitable for
Termination of Aluminium / Copper Cable.
- Outgoing Section
40 Amps DP MCB_D curve -5Nos.
Enclosure, 200A TPN 415V 50Hz Electrolytic grade AL conductor Busbar with 100%
neutal& Non adhesive PVC insulated heat shrinkable sleeves, Internal Wiring,
Terminals, etc.as required._1Set
3 SITC of the UPS Panel as mentioned avove SET 1 52356.96 52356.96
Total of Main panel & ups panel carried over to summary
2.0 DISTRIBUTION BOARDS.
Supply and fixing of following ways,single pole & Neutral sheet steel, MCB
Distribution board ,240V,on Surface / recess ,complete with tinned copper bus
bar, neutral bus bar, earth bar, din bar for mounting MCBs (but without MCBs and
incomer ) as required
2.3.2 8 Way double door EACH 4 1760.00 7040.00
Supply and fixing of following ways Surface / recess mounting, vertical type, 415 V,
TPN MCB distribution board of
2.5 sheet steel, dust protected, duly powder painted, inclusive of
200 A tinned copper bus bar, common neutral link, earth bar, din bar for
mounting MCBs (but without MCBs and incomer ) as required
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature
circuit breaker suitable for inductive load of following poles in the existing
MCB DB complete with connections, testing and commissioning etc. as
Supplying and fixing following rating, double pole, (single phase and neutral), 240
V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in
the existing MCB DB complete with connections, testing and commissioning
etc. as required.
Supplying and fixing following rating, four pole, (three phase and neutral), 415
2.15 volts, residual current circuit breaker (RCCB), complete with connections, testing
and commissioning etc. As required.
Total of Distribution Boardcarried over to summary
3.0 CABELS / MAINS
SITC of 1100V grade armoured cable having sector / circular shaped aluminium /
copper conductor PVC insulated cores under ground PVC tape wrapped inner
MR sheathed, GI strip / wire armoured and overall extruded PVC sheathed / XLPE power
cable of the following sizes. laid on wall or ceiling using GI clamps and spacers as
MR 300 Sq.mm 3 1/2 core Aluminium cable mtr. 450 1449.25 652160.41
MR 150 Sq.mm 3 1/2 core Aluminium cable mtr. 200 834.58 166915.91
MR 70 Sq.mm 3 1/2 core Aluminium cable mtr. 50 620.13 31006.47
MR 95 Sq.mm 3 1/2 core Aluminium cable mtr. 50 367.43 18371.68
MR 25 Sq.mm 4 core Aluminium cable mtr. 600 300.50 180301.97
Laying,testing and commissoning of 1100V grade armoured cable having sector /
circular shaped aluminium / copper conductor PVC insulated cores under ground
7.5 PVC tape wrapped inner sheathed, GI strip / wire armoured and overall extruded
PVC sheathed /XLPE power cable of the following size in the existing
RCC/HUME/Metal pipe as required.
7.5.2 Above 35sqmm and up to 95 sqmm mtr. 10 47.00 470.00
7.5.3 Above 95sqmm and up to 185 sqmm mtr. 10 64.00 640.00
7.5.4 Above 185sqmm and up to 400 sqmm mtr. 10 112.00 1120.00
Supply & fixing of end termination for above mentioned cables including
9.1 compressed type brass glands, crimping type coper lugs, insulation tape etc. as
'required complete with earthing of glands in following sizes
Total of Cables / Mains carried over to summary
Point wiring for light point /Fan/Exhaust Fan point/ call bell point using 2 runs of
1100 V grade 1.5 sqmm & one run of 1.5 sq.mm FRLS insulated multistranded
copper wires, in & including 25 mm dia , MS conduit surface/ concealed in wall /
1.3 ceiling conferming to IS 732 including all accessries such as junction boxes , conduit
bends, elbows and ceiling rose , and anodised GI switch box with modular switch
,modular plate and the box covered with front plate
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call
bellpoint (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated
1.54 copperconductor single core cable in surface/ recessed steel conduit, and earthing
thepoint with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable
etcas required.
Wiring for Submain wiring alongwith earth wire with following sizes of FRLS PVC
1.7 insulated copper conductor,single core cable in surface/recessed MS conduit as
required. (For lighting controoled by MCB+Circuit wiring+6A raw power plug).
Wiring for circuit wiring alongwith earth wire with following sizes of FRLS PVC
1.7 insulated copper conductor,single core cable in surface/recessed MS conduit as
required. (For lighting controled by MCB+Circuit wiring). Per
1.7.1 2x1.5sqmm+1x1.5sqmmearth wire 9000 208.00 1872000.00
Wiring for twin control point wiring using 1.5 sqmm copper conductor FRLS PVC
insulated copper conductor cable drawn through 25 dia MS conduit laid in
1.4 surface/concealed over false ceiling or in slab/wall chases including ,2way modular Per Pts 16 1290.00 20640
switches,modular plate ,suitable GI box and earthing the point with 1.5 sqm FRLS
PVC insulated copper conductor single core cable as required
Wiring for light/power plug using 2 run of 4sqmm,1100 V grade with one run of 4
sqmm green colour for earth continuity conductor FRLS PVC insulated wires drawn Per
through MS conduit laid concealed over false ceiling or in slab/wall chases including mtr.
circuit wires from the relevant DB .
Supplying and drawing following sizes of FRLS PVC insulated copper
1.17 conductor, single core cable recessed steel/ PVC conduit as required.( for 6A /
data plug point wiring)
Supplying & Drawing Co-axial TV Cable rg-6 grade,.7 mm so.id copper conductor PE
1.19 Insulated, shieldwd with fine tinned copper braid and protected with PVC sheath in 200 33.00 6600.00
the existingf surface / recessed steel / PVC Conduit as required
Supplying and fixing following modular switch/ socket on the existing modular
1.24 plate& switch box including connections but excluding modular plate etc. as
1.24.4 3 pin 5/6 amp socket outlet nos. 132 111.00 14652.00
Supplying and fixing following size/ modules, GI box alongwith modular base &cover
plate for modular switches in recess etc as required
Supplying and fixing following modular switch/ socket on the existing modular
1.24 plate& switch box including connections but excluding modular plate etc. as
1.24.4 3 pin 5/6 amp socket outlet nos. 26 111.00 2886.00
Supplying and fixing following size/ modules, GI box alongwith modular base &cover
plate for modular switches in recess etc as required
Supplying and fixing following size/ modules, GI box alongwith modular base &cover
plate for modular switches in recess etc as required
Supplying and fixing following modular switch/ socket on the existing modular
1.24 plate& switch box including connections but excluding modular plate etc. as
1.24.5 6 pin 15/16 amp socket outlet nos. 169 175.00 29575.00
Supplying and fixing following size/ modules, GI box alongwith modular base &cover
plate for modular switches in recess etc as required
Supplying and fixing following modular switch/ socket on the existing modular
1.24 plate& switch box including connections but excluding modular plate etc. as
1.24.6 Telephone socket outlet nos. 26 119.00 3094.00
Supplying and fixing following size/ modules, GI box alongwith modular base &cover
plate for modular switches in recess etc as required
Supplying and fixing following modular switch/ socket on the existing modular
1.24 plate& switch box including connections but excluding modular plate etc. as
1.24.7 TV antenna socket outlet nos. 10 119.00 1190.00
Supplying and fixing following size/ modules, GI box alongwith modular base &cover
plate for modular switches in recess etc as required
5 LIGHTING FIXTURES
SITC of the lighting following lighting fixtures as per the details given below
including necessary hardware such as clamps,nuts, bolts, nails, screws and
suspension chains as required for fixing the fixtures in position as directed by
Engineer-in-Charge.
MR 1x 10 w surface mounted LED Lamp(Ceiling light) Nos. 270 1741.55 470219.34
MR 1x 36 w surface mounted LED Lamp(Batten light) Nos. 40 1174.69 46987.79
MR 2'x2' surface mounted fitting with 36W LED Lamp.(Panel light) Nos. 92 7020.85 645918.14
MR 1x 10 w surface mounted LED Lamp(Mirror Light) Nos. 40 935.66 37426.32
MR Track Light with 3 nos x 12 w each LED lamp. Nos. 90 6426.67 578400.52
MR 300mm dia sweep exhaust fan Nos. 15 2390.37 35855.51
Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and
DSR -1.35 shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all Nos. 60 98.00 5880.00
accessories including connections etc. as required.
Installation of exhaust fan in the existing opening, including making good the
damage, connection, testing, commissioning etc. as required.
1.50.1 Up to 450mm dia sweep Nos. 15 363.00 5445.00
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including
5.5 accessories, and providing masonry enclosure with cover plate having locking Nos. 10 10724.00 107240.00
arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories,
and providing masonry enclosure with cover plate having locking arrangement and
watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as
strip earth electrode, including connection/ terminating with nut, bolt, spring,
washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of
brass nut bolt & spring washer spaced at 50mm)
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip
earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer
5.9 etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut Mtrs 600 131.00 78600.00
bolt & spring washer spaced at 50mm)
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing
5.18 along with existing surface/ recessed conduit/ submain wiring/ cable as required. Mtrs 800 37.00 29600.00
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections
5.15 etc. as required. Mtrs 125 206.00 25750
7 WIRING FOR DATA AND VOICE OUTLETS
Supplying and fixing of following sizes of medium class PVC
conduit along with accessories in surface/recess including
cutting the wall and making good the same in case of recessed
conduit as required.
Supplying and drawing of UTP 4 Pair CAT6 LAN Cable in the existing surface
1.53 /recessed steel/PVC Conduit as required.
Supply & fixing of Plug in type RJ45 computer data outlet in GI box & cover plate in
MR wall/furniture/floor complete as required. Nos. 26 860.53 22373.84
Supply & fixing of Plug in type RJ11 computer telephone outlet in GI box & cover
MR plate in wall/furniture/floor complete as required. Nos. 26 319.63 8310.28
Supply and fixing of the following types Face Plates complete with all accessories.
MR Supply & fixing of Single Face Plate Nos. 26 136.59 3551.40
Supply ,laying ,installing , testing and commmissioning of the 20 pair multi core 0.61
mm annealed copper conductor PVC insulated and PVC sheathed armoured
telephone cables generally conforming to ITD S/WS-11-C and IS 1554 part I direct in
ground /surface and / or in existing pipe as required and includig making terminal
joints, complete as required.
Supplying and drawing following pair 0.5 mm dia FRLS PVC
insulated annealed copper conductor, unarmored telephone
cable in the existing surface/ recessed steel/ PVC conduit as
Supply ,installation , testing and commissioning of ISI 20 pair telephone tag block
MR with mounting rack & bracket as required. Each 2 4097.77 8195.54
Supplying, installing, testing and commissioning of following length of Cat - 6 patch
MR cord. 4 Feet : CAT6 UTP 23 AWG Patch Cord - 1 mtr - Rack End. Factory crimped LCS2 EACH 26 475.34 12358.88
Patch cord in Blue colour.
Supplying, installing, testing and commissioning of following length of Cat - 6 patch
MR cord. 7 Feet : CAT6 UTP 23 AWG Patch Cord - 2 mtr - User End.Factory crimped LCS2 EACH 26 555.93 14454.21
Patch cord in Blue colour.
Supplying, installing, testing and commissioning of 24 port Cat 6 patch panels
available with block of four equipped with tool less IO, Rack Mountable. 19"
MR Modular Patch Panel, loaded CAT6 U/UTP 24 port LCS2 rack mountable to be EACH 1 11972.32 11972.32
compatible in 4nos of 6 X RJ 45 Tool less connector U/UTP unit in a block.
Supplying, installing, testing and commissioning of Cabinet. Size 22U( 600 X 600 mm
)(WXD) following accessories, Width (mm) 800, Depth (mm) 800, Approx.Net Wt (kg)
60, CRCA 'D' Grade thickness (mm) 1.2, RAL 9017(Matt Black), Glass: 4mm
Toughened Tinted Glass Door,Injected one piece polyurethane gasket on frame,
Accessories: Cooling Fan (230V A/C 90 CFM) - 4 Nos, Cable Manager Metal- 4
Nos,PDU 230VAC - 1 No (12 nos. 6A/16A sockets with plugs 6A/16A - 1/1pc & MCB
MR 16A/32A -0/1 Pc), cable channel 100mm wide 22U- 2 Nos,Heavy Duty Stationary EACH 1 43417.26 43417.26
shelf M6 screws,washer,cage nuts (nickel coated))3 Nos. Earthling Strips 150mm H -
1 No, Door Lock - 1 No, Castor Wheels (with Brake) - 2 Nos, Castor Wheels (without
Brake) - 2 Nos, Front Metal Band - 1 No. Packing: 5 ply cardboard & Inside 28 ply EP
foam. In the rack there must be maintained 1 U = 1.75 inches space. Nos. 1 etc
complete as required
8 CABLE TRAY.& RACE WAY.
4.5 Supplying and installing following size of perforated painted
with powder coating M.S. cable trays Reducer with perforation
not more than 17.5%, joined with connectors, suspended from
the ceiling with M.S. suspenders including bolts & nuts, painting
suspenders etc as required.
4.5.1 100 mm width X 50 mm depth X 1.6 mm thickness RM 120 880.00 105600.00
4.5.2 150 mm width X 50 mm depth X 1.6 mm thickness RM 120 1023.00 122760.00
4.5.4 300 mm width X 50 mm depth X 1.6 mm thickness RM 60 1505.00 90300.00
GI Raceway & Junction boxes ( Raceway on floor shall be of aluminium only)
Providing and fixing 2 mm thick steel sheet factory fabricated post galvanized
raceway with internal partition/compartmentized of the following sizes including
providing removable 3 mm thick GI cover, knock out holes and fixing accessories
MR earthing with 8 SWG copper earth wire complete as required including floor
supports, bends, access boxes, tap off boxes and cross over as per specification and
site requirement. (overhead / wall mounted recovery & function boxes shall be 1.6
MR 150 mm wide x 38 mm deep raceway RM 25 3294.61 82365.22
MR 100 mm wide x 38 mm deep raceway RM 15 2961.32 44419.85
Providing and fixing 300 x 300 x 50 mm deep 2 mm thick GI sheet junction box
including providing 3 mm thick stainless steel cover as per specification.
Providing and fixing 150 x 150 x 50 mm deep 1.6 mm thick GI sheet junction box
MR including providing 3 mm thick stainless steel cover as per specification. Nos. 3 3177.14 9531.42
Providing and fixing 100 x 100 x 40 mm deep 1.6 mm thick GI sheet junction box
MR including providing 3 mm thick stainless steel cover as per specification. Nos. 5 2584.33 12921.64
9 UPS AND BATTERY RACK.
Supplying, installation, testing and commissioning of (N+1) 10 kVA online double
conversion fully microprocessor based ,indoor type, compact UPS system of
mentioned rating with designed output PF 1 at 40 degree and IGBT based PWM
technology with external Isolation transformer to achieve THD < 5% and input power
MR factor of greater than 0.95 at 50% loading, Efficiency >= 93% at 50 % load, suitable set 2 710,148 1420295.97
for three phase AC input voltage 320 V to 480 V, 50 Hz +3% / - 3 % and three phase
AC output voltage 415 ± 1% volts & frequency 50 ± 0.5 Hz with all components as
mentioned in BOQ, specifications and schedule, complete as required and as per
technical specification. Each unit shall be comprising of the following: Total 2 no.s (In
125% rated Rectifier cum charger unit +100% rated Invertor, Integrated in UPS module
100% rated Inbuilt static switch at the invertor output + 2 Nos. 100% rated Inbuilt static
switches at the static bypass line.
100% rated Inbuilt Maintenance Bypass.
Web-enabled Monitoring and Management through SNMP protocols for multi-OS environments.
Inbuilt feature required for input phase seq protection and automatic change. UPS should work
on mains and should not go to battery mode in case of input phase sequence change.
Supplying, unloading, installing testing and commissioning of necessary VRLA
batteries of suitable size having 30 minutes back up time UPS for full load to be provided. 1
No spare batteryof same AH to be provided and cost to be added.
Note : Concerning vendor needs to furnish the battery sizing calculations at the time of GA
approval and battery size has to be as per the approved GA drawing.
Supply, unloading, installation testing & commissioning of matching cabinet/open
racks to house above mentioned batteries for 40 KVA UPS system along with suitable size
interconnecting cable (for UPS to Battery and battery to battery), MCCB etc. complete as required
& as per specifications.
Supply,installation testing and commissioning of UPS monitoring software suitable for RJ-
45 communication and capable of giving pop up messages for all alarms received from UPS. All
shall be capable of the following:-
Giving notifications like e-mail, paging notification, broadcast notification, battery replacement
notification, run event-based scripts.
Event logging, data logging and action logging (with date, time, description of fault and event).
Run the battery diagnostic test.
Automated unattended shutdown of computers.
Local notification through audible alarm.
Software should support :
latest version of Microsoft Windows/ Server, AIX, HP-UX, Sun Solaris, Linux, Novell
10 INTELLIGENT FIRE ALARM SYSTEM & PA
17.2 INTELLIGENT FIRE ALARM SYSTEM
Supplying, installation, testing and commissioning of micro processor based
intelligent addressable main fire alarm panel, central processing unit with the
following loop modules and capable of supporting not less than 240 devices
(including detectors) and minimum 120 detectors per loop and loop length up to 2
km, network communication card, minimum 320 character graphics/ LCD display
with touch screen or other keypad and minimum 4000 events history log in the non
volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up
with 24 volt sealed maintenance free batteries with automatic charger. The panel
shall have facility to connect printer to printout log and facility to have seamless
integration with analog/digital voice evacuation system (which is part of the
schedule of work under SH: PA System) and shall be complete with all accessories .
The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus
over IP complete as per specifications.
Supplying, installation, testing & commissioning of repeater panel wih 320
17.2.3 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence Each 1 108572.00 108572.00
switches complete as required.
Supplying, installation, testing & commissioning of intelligent analog addressable
photothermal detector complete with mounting base complete as required.
Supplying, installation, testing & commissioning of intelligent addressable thermal
17.2.9 detector with rate of rise cum fixed tempreature thermistor complete with base as Each 4 2713.00 10852.00
Supplying, installation, testing & commissioning of response indicator on
17.2.5 surface/recessed MS Box having two LED, metallic cover complete with all Each 90 263.00 23670.00
connections etc as required.
Supplying, installation, testing & commissioning of addressable manual call point
complete as required.
Supplying, installation, testing & commissioning of addressable strobe complete as
Supplying, installation, testing & commissioning of fault isolator complete with base
17.5 CABLING & WIRING FOR FAS
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with
17.5.2 annealed copper conductor having XLPE insulation, steel wire armouring & FRLS Metre 2100 141 296100.00
outer sheath complete as required.
Cable end termination of the following PVC sheathed copper conductor armoured
MR. cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs,
double compression glands with earthing.
- 2.0 Core x 1.5 Sqmm Cu Ar Cable Each 500 145.60 72801.69189
17.3 PUBLIC ADDRESS SYSTEM
Supplying, installation, testing & commissioning of 6 zone, voice alarm controller
with USB, MP3 player (including 6 zone button paging station) with seamless
integration facility with main fire alarm panel for voice evacuation complete as
Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker
complete as required.
Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall
speakers complete as required.
Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt,
25V rms operating at 240 Volt AC Supply complete as required.
17.5 CABLING & WIRING
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor
17.5.3 cable in the existing surface / recessed steel conduit of following pairs, cores and
size including connections and interconnections etc. as required.
17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm Metre 1400 51.00 71400.00
Supply and fixing of following sizes of MS conduit along with accessories in surface
1.20 /recess including painting in case of surface conduit,or cutting the wall and making
good the same in case of recessed conduit as required
11 CCTV SYSTEM
Supply, Installatin, Testing & Commissioning
1/2.9" CMOS, ICR, 1920x1080:30fps, H.265/H.264/MJPEG, Triple streams, DC12V &
PoE, Micro SD card slot, 120dB WDR, IP67 & IK10, Fixed lens (2.8mm, 4mm), IR
range: up to 30m, 3-Axis
120dB WDR,IP67&IK10,3-Axis,HLC,Smart functions
Supply, Installation,Testing & Commissioning_Bullet Camera Pcs 8 14448.40 115587.22
Mounting Bracket for CCTV Pcs 28 547.76 15337.27
WD Surveillance 4 TB Surveillance Hard Disk Drive Pcs 2 24215.35 48430.69
Network Video recorder
20-ch, 8 SATA interface, 2U, H.265&4K, Dual Network interface,RAID 0, 1,5,6,10, 16 x Pcs 2 54842.20 109684.39
1080P,8 x 4MP,4 x 4K, 320Mbps,2U
Network Video recorder
16-ch, 8 SATA interface, 2U, H.265&4K, Dual Network interface,RAID 0, 1,5,6,10, 16 x Pcs 1 34773.13 34773.13
1080P,8 x 4MP,4 x 4K, 320Mbps,2U
32 Inch Screen Monitor for CCTV Pcs 2 34773.13 69546.26
Patch Cord Cat 6 UTP Gray 1m Pcs 28 299.23 8378.49
Cat 6 Cable (1 box 305 mtr.) mts 600 52.79 31671.38
Supply of Flexible GI Pipe 25 mm Mtr 60 38.73 2324.04
12 HIGH SIDE SUB-STATION WORKS
MR 11/0.415 kV Compact Sub-station
Design, Manufacture, Testing, Packing & Supply of 630 kVA (11 / 0.415 kV)
Compact Sub - station Comprising of -
11kV, 350 MVA 400A RMU with load break switch 1Set
11kV, 350 MVA 400 Amps VCB.-1 Set.
IDMTL Relay with 2 O/C and 1 E/F & with Instantaneous high set O/C Relay (50, 51,
Phase reversal Relay ,under voltage & over voltage protection relay - 1 Set.
Digital Energy Meter with VAF+PF & RS 485 Port , CTs, CT shorting links, R/Y/B LED
indicating lamps and control SP MCBs.-1Set.
11 / 0.415 kV, 630 kVA Oil Cooled Transformer with On Load Tap Changer (+5% ,-
10% in step 1.25%) with RTCC ,OTI & WTI+ Oil - 1 No.
0.415 kV, 1000 Amps, 4 Pole electrically operated type Air Circuit Breaker with in
built microprocessor release providing over load short circuit ,under voltage ,over
voltage & earth fault protections as outgoing - 1 Set.
Multi function Meter (VAF+PF ) with RS 485 Port - 1 Set
Power pack - 1 Set
20 kVAR 440 V Capacitor Banks for heavily polluted harmonics +70A TP
MCCB+On/OFF IL & PB .1Set.
R/Y/B LED Indicating Lamps - 1 Set
MR CSS Complete as per above Set 1 2,413,639.53 2,413,639.53
Receiving, Unloading, Storing, Handling, Shifting to its location, Erection, Testing &
Commissioning of 11/0.415 kV, 630kVA Oil Cooled Compact Sub-station (Including
Pre-commissioning tests as specified in the manufacturer's manual & preparation of
MR Supply & installation of the following charts / boards written in English and Hindi
MR Shock treatment charts framed in teak wood and covered with glass No. 1 2,073.14 2,073.14
MR Danger Board vitreous enameled (6" x 6" Size) No. 1 240.17 240.17
Supply & Installation of 3 Nos Fire Buckets duly filled with fine sand & fixed on a
angle iron frame as per requirement of local Electricity Authorities
MR Supply and Installation of fire extinguisher carbon dioxide type 4.5 litre capacity No. 2 1,939.35 3,878.69
MR Supply & Installation of fire extinguisher foam type 9.0 litre capacity No. 2 4,882.81 9,765.62
Supply & Installation of 1000 mm wide Class A min. 2.0 mm thick rubber matting of
approved make as per IS 15652 : 2006 (up to 3.3 kV)
Supply & Installation of 1000 mm wide Class B min. 2.5 mm thick rubber matting of
approved make as per IS 15652 : 2006 (up to 11 kV)
MR HT Cables (11 kV)
Supplying of the following HT Cable of 11 kV XLPE Al Conductor Armoured Cable as
per ISI Marked, laid over MS supports in masonry trenches made by others. Supports
in masonry trenches including stainless steel clamps for supporting cables, cable ties
& cable tags at both ends of cable etc. to be provided by Electrical Contractor.
Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 11KV
DSR8.1 grade of following size direct in ground including excavation,sand
cushioning,trotective covering and refilling the trench etc.as required
8.1.2 Above 120sqmm and up to 400sq.mm RM 25 482.00 12,050.00
Supplying and making indoor cable end termination with heat shrinkable jointing kit
10.4 complete with all accessories including lugs suitable for following size of 3 core, XLPE
aluminium conductor cable of 11kV grade as required .
Supply, Installation , Testing & Commissioning of 125 KVA SILENT DG Set comprising
of Cummins make engine model 6BTAA5.9-G13 developing 159 BHP Coupled to 125
KVA, 415 V STAMFORD make alternator mounted on a common base frame,
(a) 290 liter fuel tank(Inside enclosure)
(b) Battery and leads .
MR (c) AVM Pads Set 1 1,099,293.42
(d) Silencer / Exhaust Pipe
( e) First fill of lube oil.
(g) Acoustic enclosure
(h) Standard AMF Control Panel suitable for 1x125 KVA DG Set
(i) Load Side Terminal Box suitable for 1x125 KVA DG Set
Supply, Installation , Testing & Commissioningof 500 KVA SILENT DG Set comprising
of Cummins make engine model KTAA 19 G10 developing 587 BHP Coupled to 500
KVA, 415 V STAMFORD make alternator mounted on a common base frame,
(a) Fuel tank 690 Ltrs. ( Inside Enclosure)
(b) Batteries & Leads.
MR (c) AVM Pads Set 1 4,389,486.44
(d) Silencer / Exhaust Pipe
(e) First fill of lube oil.
(g) Acoustic enclosure
(h) Standard AMF Control Panel suitable for 1x500 KVA DG Set
(i) Load Side Terminal Box suitable for 1x500 KVA DG Set
ABSTRACT OF QUANTITIES FOR HVAC WORK
S.no Description Unit Qty. DSR RATE Amount NS RATE Amount
SYSTEM Supply Installation, Testing & Commissioning of modular type Variable Refrigerant
2019 - SR. Flow/ Variable Refrigerant Volume air-cooled Outdoor units suitable for cooling and
NO. 1 heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum
two compressors for above 14 HP modules, microprocessor based Controller, top
discharge type condensing unit(s), with R410A Refrigerant, vibration isolators ,with Per
suitable foundation etc. complete as required. The unit shall deliver the rated capacity HP
at AHRI Conditions and work even at 50°C ient temperature without tripping. The unit
shall be suitable to work on 400V+/-10%, 3 Phase, 50 Hz AC power supply. The unit
shall be filled with first charge of the refrigerant and ready for use as required. The COP
at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 .
Supply, installation, testing and commissioning of following minimum capacity VRV/
VRF High wall type Indoor unit equipped with washable synthetic media pre-filter, fan
section with low noise fan/ dynamically balanced blower, multi speed motor, coil
section with DX copper coil ,electronic expansion valve, outer cabinet, cordless remote
control, drain pan, necessary accessories etc., suitable for operation on 230V ± 10%,
50Hz, single phase AC supply, complete as required. The unit shall have automatic
force shut down provision in case of fire on receiving signal from BMS System. The
cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19
Degree C WB temperature.
3 2 Supply,installation,testingandcommissioningoffollowingminimumcapacity4-
wayflowVRV/VRFCassetteTypeIndoorceilingmountedunitequippedwithsyntheticwashab
filter,fansectionwithlownoisefan/dynamicallybalancedblower,multispeedmotor,coilsect
ionwithDXCoppercoil,electronicexpansionvalve,outercabinet,drainpump,grill,necessary
supports,vibrationisolation,cordlessremotecontroletc.,suitableforoperationonsinglepha
se230V±10%,50HzACsupply,complete,asrequired.Theunitshallhaveautomaticforceshut
downprovisionincaseoffireonreceivingsignalfromBMSSystem.Thecoolingcapacityofindo
orunitwillbeatairinletconditionsof27DegreeCDBand19DegreeCWB temperature.
Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen
testing of following nominal sizes of soft/ hard drawn copper refrigerant piping for
VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger
supports, jointing/ brazing including accessories, insulated with XPLE Class - O tubular
insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections
of specified thickness as given below for Suction and Liquidlines, all accessories as per
specifications etc. as required :
6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 19 245.00 4,655.00
9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 551 331.00 182,381.00
12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 442 466.00 205,972.00
4.4 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick
19 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 610 707.00 431,270.00
22.2 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 94 865.00 81,310.00
25.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 79 1,022.00 80,738.00
4.8 5.8 28.58 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick
31.8mm dia (OD) (Hard drawn) with tube thickness 1.62mm with19mm thick insulation m 420 1,170.00 491,400.00
4.10 5.10 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62mm with19mm thick
38.1mm dia (OD) (Hard drawn) with tube thickness 1.62mm with19mm thick insulation m 20 1,265.00 25,300.00
4.12 5.12 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62mm with19mm thick
5 MR Supply, installation, testing and commissioning of uPVC Pipe ,complete with fittings,
supports,U trap arrangement,Clean Plug with 6mm nitrile insulation and accessories as -
per specifications, drawings.
6 MR Providing and fixing MS Stand for ODU along with vibration pad as per approved
7 MR Providing and fixing control cum transmission wiring of 2 core x 1.0 sq. mm copper in
suitable conduits between indoor and outdoor uni
Supplying and installing of following size of perforated hot dip galvanized G.I cable tray
with perforations not more than 17.5%, in convenient sections, joined with connectors,
suspended from ceiling with G.I suspenders including bolts and nuts, etc. for carrying
refrigerant pipe in outdoor application as required.
8.1 450 mm width x 62.5 mm depth x 2 mm thickness RM 1250 747.86 934,830.75
8.2 225mm width x 50 mm depth x 1.6 mm thickness RM 600 419.53 251,720.28
9 MR Imported fittings Y-joints and headers etc. NOS 112 3,891.33 435,828.74
SITC of 1.5 T split with rotary compressor of 5 Star rating Inverter technology approved
make make inclusive of 5 year warranty on compressor all complete. (Note- Indoor and NOS 4 38,644.31 154,577.23
outdoor unit should have copper Condensor and cooling coil.)
11 MR Timer for Split AC for Server NOS 2 2,614.49 5,228.97
Providing and fixing lockable MS cage for outdoor units primered and painted black. NOS 15 3,283.31 49,249.62
GRAND TOTAL 11,158,200.44
GRAND TOTAL 11,158,200.44
BILL OF QUANTITIES - PLUMBING WORKS
DSR - DSR Rate DSR Amount MR Rate MR Amount
S.no DESCRIPTION OF ITEMS UNIT Qty
Providing & fixing glazed vitreous china single trap syphonic pattern having back
inlet ,supporting chair ,wall hung water closet with cistern complete with all internal
fittings/accessories and CP brass flush bend (European type) water closet with seat
1.1 MR and lid, with C.P. brass hinges and rubber buffers, adapter, rubber joints fixed to
W.C., C.P. brass screwed washers including cutting and making good the walls and
floors wherever required and HDPE wc pan connector including jointing with white
cement complete in all respects.
Wall hung W.C. pan (White colour)with white plastic seat & lid Thermoset moulded (
bakelite ) IS 2548 Part I
For supply,iMRtallation,testing & commissioning of sanitary fixtures as per above
Providing & fixing glazed vitreous china wash basin with R.S. or C.I. brackets painted
white, 32mm C.P. brass waste of standard pattern , C.P brass wall flange 32 mm dia.
C.P. brass bottle trap and union 32 mm dia C.P. pipes to wall flange. complete
including cutting and making good the walls wherever required.
1.2.1 Undercounter wash basin (White colour)of size: 585x430 mm - -
For supply,iMRtallation,testing & commissioning of sanitary fixtures as per above
1.2.2 MR Table top wash basin (white colour)of size: 440x440 mm - -
For supply,iMRtallation,testing & commissioning of sanitary fixtures as per above
Providing & fixing 15mm C.P. brass single hole wash basin mixer without popup
waste system with 450mm long copper pipes and brass nut
For supply,iMRtallation,testing & commissioning of sanitary fixtures as per above
1.4 MR Providing & fixing vitreous chinaware urinal comprising - -
Large flat back wall hung urinal in glazed vitreous China new magnum urinal - -
15 mm electrically operated solenoid valve with infra red seMRor mounted in a box
CP brass chromium plated flush piping from solenoid valve to urinal terminated with
a 15 mm screwed spreader
32 mm nominal bore CP cast brass waste - -
32 mm nominal bore CP cast bottle trap with exteMRion pipe rubber adopter for
waste connection, CP brass wall flange.
For supply,iMRtallation,testing & commissioning of sanitary fixtures(white
colour) as per above details.
Providing & fixing stainless steel sink R.S. or C.I. Brackets painted, 40mm C.P.
1.5 MR waste, C.P. brass chain and rubber plug, 40mm C.P. cast brass bottle with necessary - -
union complete including cutting and making good the walls wherever required
Stainless steel sink single bowl with drain board(size 510x1040mm) of
For supply,iMRtallation,testing & commissioning of sanitary fixtures as per above
Providing & fixing Sink Mixer with Swinging Casted Spout (Wall Mounted Model)
with 450mm long Copper Pipes & Brass Nuts.CP brass wall flange
For supply,iMRtallation,testing & commissioning of sanitary fixtures as per above
Providing & fixing toilet paper holding with cover including cutting and making
good the walls.
For supply,iMRtallation,testing & commissioning of sanitary fixtures as per above
Providing & fixing Horizontal liquid soap dispeMRer with stainless steel lid and
1. 8 MR brackets fixed to wooden cleats with C.P. brass screws.-Euronics model no.ES14H or - -
For supply,iMRtallation,testing & commissioning of sanitary fixtures as per above
Providing & fixing C.P. brass coat hooks fixed on toilet door with C.P. brass screws.
For supply,iMRtallation,testing & commissioning of sanitary fixtures as per above
Providing & fixing beveled edge mirror 5.5mm thick of superior quality plate glass
complete on 12mm thick marine ply confirming to IS:710, fixed to wooden cleats
with CP brass screws and washerswith 40 mm wide teak wood frame as per design
including polishing
For supply,iMRtallation,testing & commissioning of sanitary fixtures as per above
Providing & fixing Hand Shower (Health Faucet) with 8mm dia, 1M long PVC tube
and wall hook CP brass wall flange.
For supply of sanitary fixtures as per above details Each 13 - 1,215.44 15,800.73
Providing & fixing, testing and commissioning of storage type electric water heater
with automatic thermostatic control electric element, pressure release valve,
brackets fixed to expaMRion fasteners with M.S. nuts and bolts all complete
including cutting and making good the walls wherever required.
25 litres capacity (Horizontal /Vertical type1.5 kw electrical load). - -
For supply,iMRtallation,testing & commissioning of sanitary fixtures as per above
Providing & fixing wall mounted 25 mm dia Stainless steel coated grab bar including
cutting & making good the walls(size 450mm long).
For supply,iMRtallation,testing & commissioning of sanitary fixtures as per above
Providing & fixing 15 mm dia C.P. brass bib cock with Hose union of approved
For supply,iMRtallation,testing & commissioning of sanitary fixtures as per above
Providing & fixing 15 mm dia C.P. brass bib cock with C.P. wall flange of approved
For supply,iMRtallation,testing & commissioning of sanitary fixtures as per above
FRAGRANCE DISPEMRER MACHINE :-Providing and fixing of Fragrance DispeMRer
1.17 MR machine complete with refill can and 'C' size battery (2 Nos) for operation fixed to - -
wooden cleats with CP brass screws (200ML-250ML)
For supply,iMRtallation,testing & commissioning of sanitary fixtures as per above
Providing and fixing of stainless steel finish Paper Towel DispeMRer having
capacity of 400-600 Paper towels fixed to wooden cleats with C.P. brass screws.
For supply,iMRtallation,testing & commissioning of sanitary fixtures as per above
SUB HEAD B : WATER SUPPLY
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal
stability for hot & cold water supply including all (CPVC) plain & brass threaded
fittings including fixing the pipe with clamps at 1.00 m spacing. This including jointing
of pipes & fittings with one step CPVC solvent cement and testing of joints
complete as per direction of
engineer in charge. .
Internal Work - Exposed on Wall
18.7.2 20 mm nominal outer dia pipes. Metre 210.00 325.10 68,271.00 -
18.7.3 25 mm nominal outer dia pipes. Metre 160.00 408.55 65,368.00 -
18.7.4 32 mm nominal outer dia pipes. Metre 80.00 500.95 40,076.00 -
18.7.5 40 mm nominal outer dia pipes. Metre 50.00 674.35 33,717.50 -
18.7.6 50 mm nominal outer dia pipes. Metre 60.00 927.00 55,620.00 -
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal
stability for hot & cold water supply including all CPVC plain & brass threaded
fittings i/c fixing the pipe with clamps at 1.00 m spacing. This including jointing of
2 18.8 pipes & fittings with one step CPVC solvent cement and the cost of cutting chases - -
and making good the the same including testing of joints complete as per
direction of engineer in
Concealed work including cutting chases and making good the walls etc.
18.8.2 20 mm nominal outer dia pipes. Metre 250 513.75 128,437.50 -
3 18.16 Providing and fixing brass stop cock of approved quality complete. - -
Providing and fixing gun metal gate valve with C.I. wheel of approved quality
Providing and fixing C.P. bass angle valve for basin mixer and geyser points of
5 18.53 approved quality conforming to I.S:8931 a) 15 mm nominal bore.(Jaquar model no. - -
1133/approved equal).
Providing and fixing unplasticised P.V.C connection pipe with PTMT Nuts coller
and bush of approved quality and colour.
18.74.2 15mm nominal bore with 45cm length Each 75 107.90 8,092.50 -
Providing and placing on terrace (at all floor levels) polyethylene water storage tank,
IS : 12701 marked, with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without fittings and the base
support for tank.
SUB HEAD C : INTERNAL DRAINAGE
Providing and fixing cast iron trap of self cleaMRing design with cast iron screwed
1 down or hinged grating with or without vent arm complete, including cost of cutting
and making good the walls and floors.
17.60.1 100 mm inlet and 100 mm outlet Each 15 1,604.10 24,061.50 -
17.60.1.1 Sand cast iron S&S as per IS: 3989
2 17.35 Providing and fixing soil, waste and vent pipes. - -
Centrifugally cast (spun) iron socket &
spigot (S&S) pipe as per IS: 3989
17.35 Providing and fixing soil, waste and vent pipes. - -
17.35.2 75 mm diameter : - -
Centrifugally cast (spun) iron socketed pipe
as per IS: 3989
Providing and fixing single equal plain junction of reqd. degree with access door,
iMRertion rubber washer 3mm thick, bolts and nuts complete.
17.43.1.2 Sand cast iron S&S as per IS - 3989 Each 40 731.40 29,256.00 -
17.43.2.2 Sand cast iron S&S as per IS - 3989 Each 30 573.80 17,214.00 -
4 17.44 Providing and fixing single equal plain junction of reqd. degree. - -
17.44.1.2 Sand cast iron S&S as per IS - 3989 Each 30 707.30 21,219.00 -
17.44.2.2 Sand cast iron S&S as per IS - 3989 Each 30 498.90 14,967.00 -
Providing and fixing bend of required degree with access door, iMRertion rubber
washer 3mm thick, bolts and nuts complete.
17.38.1.2 Sand cast iron S&S as per IS - 3989 Each 25 597.60 14,940.00 -
17.38.2.2 Sand cast iron S&S as per IS - 3989 Each 25 453.40 11,335.00 -
6 17.39 Providing and fixing bend of required degree . - -
17.39.1.2 Sand cast iron S&S as per IS - 3989 Each 25 439.75 10,993.75 -
17.39.2.2 Sand cast iron S&S as per IS - 3989 Each 25 298.20 7,455.00 -
7 17.57 Providing and fixing collar. - -
17.57.1.2 Sand cast iron S&S as per IS - 3989 Each 25 439.75 10,993.75 -
17.57.2.2 Sand cast iron S&S as per IS - 3989 Each 25 271.45 6,786.25 -
Providing and fixing MS holder bat clamps of approved design to cast iron (spun)
pipe embedded in and Including cement concrete blocks 10 x10 x10cm of 1:2:4
8 17.37 mix (1 cement : 2 coarse sand : 4 graded stone aggregate - -
20mm nominal size) including cost of cutting holes and making good the
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded
9 19.2 stone aggregate 40 mm nominal size) alround SW including bed concrete as per - -
standard design.
19.2.1 100 mm diameter S.W. pipe Metre 650 895.50 582,075.00 -
Providing and fixing G.I. Pipes complete with G.I. Fittings and clamps. including
cutting and making good the walls etc.
Painting G.I. Pipes and fittings with two coats of anticorrosive bitumastic paint of
approved quality
18.40.4 32 mm nominal bore Metre 250 18.40 4,600.00 -
18.40.5 40 mm nominal bore Metre 200 20.95 4,190.00 -
18.40.6 50 mm nominal bore Metre 180 25.25 4,545.00 -
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste
vent pipes and fittings with two coats of synthetic enamel paint of
any colour such as chocolate grey, or buff etc. over a coat of primer
(of approved quality) for new work :
17.65.1 100 mm diameter pipe Metre 350 69.55 24,342.50 -
17.65.2 75 mm diameter pipe Metre 250 52.90 13,225.00 -
Providing lead caulked joints to sand cast iron/centrifugally cast(spun) iron pipes &
fittings of diameter :
Providing & filling the joints with spun yarn,cement slurry & cement mortar 1:2(1
cement: 2 fine sand) in SCI/CI pipes.
15 17.48 Providing and fixing single unequal plain junction of required degree. - -
17.48.1.2 Sand cast iron S&S as per IS - 3989 Each 15 841.10 12,616.50 -
ABSTRACT OF QUANTITIES FOR FURNITURE
S.no Item Specifications Unit Rate Amount Ref. Image
Providing in place of display storage of following specifications. The overall dimensions of the storage shall be 1050mm x 350mm x 2060mm.
The material shall be MDF and shall be as per design.
Providing and placing in place of buffett table of following specifications. Overall size shall be 1400mm x 450mm x 750mm. TABLE material shall
be: Top:= TEMPERED GLASS of size 1350mm x 452mm x 8mm thickness. Color shall be SUPER WHITE IN BEIGE PAINTING. Body shall be made
2 Buffet Table from MDF. LEGS shall be made from RUBBER WOOD. It shall be Coated with PU. The ample width and length of the table top and spacious Nos 3 68,492.36 205,477.08
storage space makes it a highly functional piece. The smooth edges and glossy finish give the piece an uber-cool aesthetic look. It shall be also
shelves and drawers for storage.
Providing and Placing in place of dining table of following specifications. The Overall size shall be 1000mm X 1000mm X 760mm. Table Top shall
3 Table be 18mm thick MDF with VENEER finish. Rubberwood Understructure: The rubberwood frame holds the table in a secure grip. So even if you Nos 4 17,354.84 69,419.35
concentrate a lot of weight on one side, there is no fear of toppling.
Providing in place of dining chair of following specifications. Primary Material shall be: Rubber Wood. Finish Color: Grey. Dimensions shall be-
4 Chair W x H x D (cm) 52cm x 81cm x 50cm. Construction shall be Knock Down. Upholstery Material shall be Fabric. Seat Height (cm) 47.5cm. The wide Nos 16 12,163.20 194,611.15
backrest and seat enhance the structure making it comfortable, every time.
Providing in place of side table of following specifications. Overall Size shall be Width: 53.3cm, Depth: 44cm, Height: 54cm. Top shall be made
5 Table from Rubberwood, Understructure shall be made from Rubber wood. Shade: Cherry. Construction shall be knockdown with Load Bearing Nos 3 10,961.69 32,885.07
Capacity of 25 kg UDL.
Providing in place of chair of followoing specifications. Material shal be Solid Rubberwood with Fabric upholstery. Wood Colour shall be Dark
6 Chair wood. Overall dimensions of the chair shall be 470mm (L) x 470mm (W)x 785mm (H). This table made with MDF and Rubberwood will stand by Nos 8 10,599.07 84,792.52
you strongly no matter the moving.
Providing in place of 3 seater sofa. Overall Size shall be Width: 201cm, Depth: 100cm, Height: 79cm, Seating Height: 39.5cm. Upholstery
material shallbe PVC with 2 ton shade– Beige and Black. Thickness of the upholstery shall be 1mm. Frame material shall be Solid Wood with ply
cross section. The Moisture content shall be 10 -12 %, Thickness of Plywood used shall be 10mm. Foam material shall be Slab stock foam of
Density: 28 kg/m3 at seat and back with 23 kg/m3 softy foam.
Providing in place of 1 seater sofa. Overall Size shall be Width: 101cm, Depth: 100cm, Height: 79cm, Seating Height: 39.5cm. Upholstery
material shallbe PVC with 2 ton shade– Beige and Black. Thickness of the upholstery shall be 1mm. Frame material shall be Solid Wood with ply
cross section. The Moisture content shall be 10 -12 %, Thickness of Plywood used shall be 10mm. Foam material shall be Slab stock foam of
Density: 28 kg/m3 at seat and back with 23 kg/m3 softy foam.
Providing in place of side table of following specifications. Overall Size shall be Width: 53cm, Depth: 45cm, Height: 45cm. TABLE Materials &
SIZE: TOP: SOLID VENEER MDF TABLE TOP WITH 18mm thickness. LEGS: SOLID RUBBER WOOD. Color shall be CAPPUCINO.
Providing in place of main table with overall size of table equal to 1350 x 600 x750mm. The table is made of 25 mm thick MDF – one side pre-
laminate board with 0.4 mm PVC membrane pressed on to top. Grommet provided on work surface for wire manaement. The modesty panel is
made of 25 mm thick MDF – one side pre-laminate board with 0.4 mm PVC membrane pressed on to top. The understructure is made of 25
mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. The HInge door
unit is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping.
Handles are provided for ease of opening. Pedestals are provided with lock for security.
The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and upholstered
with high stretch knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR polyurethane foam used in seat and back
cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the base frame and are cantilevered in such a way that it
gives a multi dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjusments. The
cantilevered seat offers impact cushioning while seating and synchronises with the back movement during posture changes. The ‘S: shaped
11 Chair spines moulded in high strength glass filled Polyamide and the spine connector moulded in glass filled Polyamide form the back spine structure Nos 2 13,376.44 26,752.88
involved in multi dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt limiter feature which is
inbuilt in saet base and the tension is user weight dependent. The adjustable armrests assembly consists of armrest housing sliding over the
armrest structure, both moulded in glass filled Polyamide. The pneumatic height adjustment shall have a stroke of 9.2cm.The pedestal is
injection moulded in glass filled Polyamide and fitted with 5 nos. twin wheel castors. The pedestal is 66cm pitch centre diameter and 76cm with
castors. The overall dimensions of the chair shall be 76cmx 76cm x(99.5-108.8cm). The seat height shall be (44.5-53.8cm).
The overall size of the wortop shall be 3600mm x 1500mm x 740mm. Worktop shall be made from 25mm thick MDF one side prelaminate
board with 0.4mm PVC membrane pressed on to top and having chamfered edge. Soft closing dual access flap provided for access to power
supply and data cables. The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved
Meeting shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is
Table added at bottom edges for improving the aesthetics.The product has a knock-down construction. A wire raiser made of 0.8mm CRCA MS
IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either sides for
standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual
Cables(eg. HDMI,VGA-A,etc).
The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed moulded reconstituted wood & upholstered with leather and moulded
polyurethane foam. Size of back shall be (W)-46.0cm, (H)-57.0cm & size of seat shall be (W)-49.0cm x (D)-49.5cm. High Resilience (HR) foam
should be used in making seat & back which shall be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for
25% compression. The back rest should be connected to the mechanism with a drop-lift mechanism which can be adjusted in the range of 7.0+/-
0.5cm for the comfortable back support to suitable individual need. Armrests should be pressure die casted in polished aluminium with PP arm
tops. The mechanism of chair shall have following features:360 degree revolving type, Seat/Back tilt ratio of 1:3, Synchronized tilt, Back tilt with
13 Chair 4 position locking and Side tilt tension adjustment knob should be operated while taking back support for better adjustment of comfort. The Nos 12 63,778.26 765,339.09
chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal shall be made of die-cast
polished aluminium. it shall be fitted with 5 nos twin wheel castor. The size of head rest shall be (W)26.0cm x 12.0cm(L). The size of the
pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black
polypropylene. Overall dimensions of Chair shall be, Width of Chair - 75.0cm, Depth of Chair - 75.0 cm as measured from pedestal below.
Height from ground - min 113.5 to max 138.0 cms. Seat height - min 41.0cm to max 51.0 cm. Dimensions tolerance / variations shall be within
The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed moulded reconstituted wood & upholstered with leather and moulded
polyurethane foam. Size of back shall be (W)-46.0cm, (H)-57.0cm & size of seat shall be (W)-49.0cm x (D)-49.5cm. High Resilience (HR) foam
should be used in making seat & back which shall be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for
25% compression. The back rest should be connected to the mechanism with a drop-lift mechanism which can be adjusted in the range of 7.0+/-
0.5cm for the comfortable back support to suitable individual need. Armrests should be pressure die casted in polished aluminium with PP arm
tops. The mechanism of chair shall have following features:360 degree revolving type, Seat/Back tilt ratio of 1:3, Synchronized tilt, Back tilt with
14 Chair 4 position locking and Side tilt tension adjustment knob should be operated while taking back support for better adjustment of comfort. The Nos 2 63,775.70 127,551.41
chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal shall be made of die-cast
polished aluminium. it shall be fitted with 5 nos twin wheel castor. The size of head rest shall be (W)26.0cm x 12.0cm(L). The size of the
pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black
polypropylene. Overall dimensions of Chair shall be, Width of Chair - 75.0cm, Depth of Chair - 75.0 cm as measured from pedestal below.
Height from ground - min 113.5 to max 138.0 cms. Seat height - min 41.0cm to max 51.0 cm. Dimensions tolerance / variations shall be within
The seat sub-assembly shall be made up of 1.2+/-0.1cm thk plywood upholstered with moulded foam and polyster fabric and shall be covered
with an injection moulded polypropylene outer cover. The seat should tip-up when not in use and this feature should be used while stacking the
chairs horizontally. The back sub-assembly shall be made up of injeection -moulded polypropylene inner upholstered with moulded foam and
polyster fabric and shall be covered with an injection moulded polypropylene outer cover. The countoured back with width extension at the
bottom area shall be designed to give comfort to lower back. The back flexing feature shall allows the back to tilt by 9+/-2 degree to aid the user
in adopting a comfortable reclining posture. The dimensions of back shall be 45.2cm(W) X 44.6cm(H). and of seat shall be 47.0cm (W) X
50.0cm(D). The powder coated 4 leg structure shall be made of 2.2+/-0.03cm dia X 0.25+/-0.02cm thk M.S.E.R.W. tube front and rear leg shall
be welded along with connecting tube made of 1.9+/-0.02cm dia X 0.2+/-0.016cm thk M.S.E.R.W tube to form the tubular frame assembly. The
15 Desklet Chair Nos 29 10,591.71 307,159.54
legs shall be provided with injection moulded adopter bush in black nylon and brake-loaded castors enabling easy maneuvering while not in use
and stable siting while in use. The armrests structure shall be made up of 2.2+/-0.03 cm dia X 0.25+/-0.02cm thk M.S.E.R.W. tube welded to
the tubular frame structure and having a scratch-resistant ABS arm top. The chairs should be stacked horizontally when not in use. The full
desklet assembly shall be flip-up type and shall be made up of extension tube of 1.9+/-0.02cm dia X 0.2+/-0.016cm thk M.S.E.R.W. tube and a
support tube on L.H. side of 1.6+/-0.02cm dia X 0.2+/-0.016cm thk M.S.E.R.W. tube on which an scratch resistant ABS desklet top shall be fixed
and covered on bottom side with a bottom cover. The polyurethane foam shall be moulded with density= 70.0+/-8.0kg/m3 and hardness=20+/-
2 for seat and 16+/-2 for back at 25% compression. The Twin wheel castors shall be injection moulded in black. Overall Dimensions of Chair
shall be Seat Height - 47.5 cm, Height - 89.0cm, Width & Depth of Chair as measured from pedestal - Width-71.0cm and Depth-82.0 cm.
Providing in place of sofa of follwoing specifications. Upholstery material shall be Fabric of shade Red plus Dark Grey. Upholstery thickness shall
be thickness 1mm. Frame material shall be Combination of plywood and pine Wood. Plywood thickness: 12 mm (moisture resistance and
termite free). Pinewood shall be at cross section (without knots). Moisture content: 10 -12%. Foam Seat Material shall be Slab stock foam of
Density: Base 28 kg/m3 and super soft 32 kg/m3 at top. Pocket spring of diameter 2mm is emebdded in seat. Cushions for Back rest: The front
of the backrest is made of loose conjugated polyester fibre which is weighed & filled in the upholstery to make the required cushion. Webbing
shall be S spring which is powder coated. Mechanism of Recliner: Leggett & Platt make. It is made up of mild steel linkages which are riveted
together. The reclining mechanism is tested for 158 kg load. Legs shall be metal powder coated with plastic bushes fitted at the bottom surface.
The sofa shall be L shape and shall be provided as required at site.
Providing in place of 3 seater sofa of follwoing specifications. Upholstery material shall be Fabric of shade Red plus Dark Grey. Upholstery
thickness shall be thickness 1mm. Frame material shall be Combination of plywood and pine Wood. Plywood thickness: 12 mm (moisture
resistance and termite free). Pinewood shall be at cross section (without knots). Moisture content: 10 -12%. Foam Seat Material shall be Slab
3 seater stock foam of Density: Base 28 kg/m3 and super soft 32 kg/m3 at top. Pocket spring of diameter 2mm is emebdded in seat. Cushions for Back
recliner rest: The front of the backrest is made of loose conjugated polyester fibre which is weighed & filled in the upholstery to make the required
cushion. Webbing shall be S spring which is powder coated. Mechanism of Recliner: Leggett & Platt make. It is made up of mild steel linkages
which are riveted together. The reclining mechanism is tested for 158 kg load. Legs shall be metal powder coated with plastic bushes fitted at
the bottom surface.
Providing in place of center tabe of following specifications. Overall Size shall be Width: 107cm, Depth: 81.5cm, Height: 46cm. TABLE Material
18 Center Table Nos 4 12,527.10 50,108.39
shall be: TOP: SOLID TABLE TOP, LEGS: SOLID RUBBERWOOD. Color shall be WENGE.
Providingin place of main table with overall size of table 2350 x 2350 x 750mm. The main table shall be of size 2350 x 1150 x 750mm. The side
unit shall be 1200 x 600 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4
mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The
ERU top is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.
The modesty panel is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane
pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with
matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge
banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thickof 1.9+/-0.02cm dia X 0.2+/-0.016cm thk M.S.E.R.W tube to
The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed moulded reconstituted wood & upholstered with leather and moulded
polyurethane foam. Size of back shall be (W)-46.0cm, (H)-57.0cm & size of seat shall be (W)-49.0cm x (D)-49.5cm. High Resilience (HR) foam
should be used in making seat & back which shall be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for
25% compression. The back rest should be connected to the mechanism with a drop-lift mechanism which can be adjusted in the range of 7.0+/-
0.5cm for the comfortable back support to suitable individual need. Armrests should be pressure die casted in polished aluminium with PP arm
tops. The mechanism of chair shall have following features:360 degree revolving type, Seat/Back tilt ratio of 1:3, Synchronized tilt, Back tilt with
20 Main Chair 4 position locking and Side tilt tension adjustment knob should be operated while taking back support for better adjustment of comfort. The Nos 3 63,778.26 191,334.77
chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal shall be made of die-cast
polished aluminium. it shall be fitted with 5 nos twin wheel castor. The size of head rest shall be (W)26.0cm x 12.0cm(L). The size of the
pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black
polypropylene. Overall dimensions of Chair shall be, Width of Chair - 75.0cm, Depth of Chair - 75.0 cm as measured from pedestal below.
Height from ground - min 113.5 to max 138.0 cms. Seat height - min 41.0cm to max 51.0 cm. Dimensions tolerance / variations shall be within
The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed moulded reconstituted wood & upholstered with leather and moulded
polyurethane foam. The back shall be designed with contoured lumber support for extra comfort. Size of back shall be (W)-45.0cm, (H)-49.0cm
& size of seat shall be (W)-49.0cm x (D)-49.5cm. High Resilience (HR) foam should be used in making seat & back which shall be moulded with
21 Visitor Chair density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression. The understructure should be welded structure Nos 9 37,932.42 341,391.80
made up of M.S.E.R.W. ellipitical tube and the understructure should powder coated with 40-60 micron DFT (Dry film thickness) Overall
dimensions of Chair shall be, Width of Chair - 51.0cm, Depth of Chair - 66.5 cm as measured from base. Height from ground - 96.0 cm. Seat
height -48.0 cm. Dimensions tolerance / variations shall be within +/- 1 cm.
Providing in place of 3 seater sofa. Overall Size shall be Width: 186cm, Depth: 87cm, Height : 89cm, Seating Height: 42cm. STITCHING shall be
22 Sofa 3 seater Polyester Poly thread which must be 100% POLYSTER (FABRIC DEPALMA STONE). Thickness shall be 0.7mm, Weight (GSM): 320gsm, LEG Nos 2 66,080.40 132,160.81
MATERIAL: SOLID RUBBER WOOD.
Providing in place of Side table of following specifications. Overall Size shall be Width: 60.5cm, Depth: 60cm, Height: 46cm. TABLE Material
shall be: TOP: SOLID TABLE TOP, LEGS: SOLID RUBBER WOOD. Color shall be WENGE.
Supplying in place of 1 seater Sofa. It shall be having Rubber wood frame with PVC upholstery in brownshade. The foam shall be Soft foam for
more comfortable seating. The stitching shall be Prominent stitching lineson upholstery and Partioned seats with Square armrest. Its Glossy
lacquered fram shall be in cappuccino shade. Overall Dimensions of 1 Seater sofa shall be- 670mm x 835mm x 850mm. The seating height shall
Providing in place of side table of following specifications. Overall Size shall be Width: 53cm, Depth: 45cm, Height: 45cm. TABLE Materials &
SIZE: TOP: SOLID VENEER MDF TABLE TOP WITH 18mm thickness. LEGS: SOLID RUBBER WOOD. Color shall be CAPPUCINO.
Providing and Placing in place of conference table of follwoing specifications. The overall dimensions of the table shall be 2100 x 1200 x
750mm. These terminating leg structure shall be in M.S. CRCA sheet/ tubes/rods as per IS. 513/7138/432 finished with epoxy power coating of
the approved colour as per the project designer. Worktop shall be made of 25MM thick Pre-Laminated Board conforming to IS: 12823. All the
edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Cross members in the
Upbeat system are made from 50 mm x 25 mm x 1.2 mm thick. Cross members are assembled by friction fit PDC joinery and Grub screws. All
cross members are mounted at a distance of 165 mm from worktop sides. Wire management: Wire tray with integrated power box made with
a combination of 0.6 mm thick CRCA outer body and 0.8 mm thick CRCA switch plate (8+3 Anchor Roma) module cut out as standard. They are
mounted on worktop.
The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and upholstered
with high stretch knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR polyurethane foam used in seat and back
cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the base frame and are cantilevered in such a way that it
gives a multi dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjusments. The
cantilevered seat offers impact cushioning while seating and synchronises with the back movement during posture changes. The ‘S: shaped
27 Chair spines moulded in high strength glass filled Polyamide and the spine connector moulded in glass filled Polyamide form the back spine structure Nos 6 13,376.44 80,258.64
involved in multi dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt limiter feature which is
inbuilt in saet base and the tension is user weight dependent. The adjustable armrests assembly consists of armrest housing sliding over the
armrest structure, both moulded in glass filled Polyamide. The pneumatic height adjustment shall have a stroke of 9.2cm.The pedestal is
injection moulded in glass filled Polyamide and fitted with 5 nos. twin wheel castors. The pedestal is 66cm pitch centre diameter and 76cm with
castors. The overall dimensions of the chair shall be 76cmx 76cm x(99.5-108.8cm). The seat height shall be (44.5-53.8cm).
Overall Dimensions of TDU shall be 900mm(W)x470mm(D)x2000mm(H) . The construction shall be Rigid Knock Down construction .All major
panels -0.7 mm thick CRCA, False side panel - 0.9 mm thick ,Bottom Shelf - 0.8 mm thick CRCA sheet .Vertical Handle sections for shutters : 0.9
mm thick CRCA sheet . CRCA D Grade as per IS -513 .Also there shall be 4 adjustable shelves for 2000 H TDU . Uniformly Distributed Load
28 Storages Capacity per each full shelf is 80 Kg maximum . For 2000 H TDU -A4 size box file can be stored vertically on all five shelves and clear space Nos 20 27,968.92 559,378.40
above second shelf is 296 mm . The shutter opening shall be double shutters operating in opposite direction giving full accessibility to inside
without disturbing aisle . The 10 lever cam lock through lock lever and color should be text. bond white - metal plus shutter - translucent white .
Leveler shall be screw type with hex . plastic base and finish shall be epoxy polyester powder coating to thickness of 50 micron (+/- 10).
ABSTRACT for Façade & Hologram Projection – Travancore House
S.no DSR/MR Description Unit Qty DSR Rate DSR Amount NS Rate NS Amount
Supply, installation, testing, commissioning and programming of following items-
Three Chip LCD or Three Chip DLP Laser projector with Auto Filter cleaning along with suitable lens, Min. 15,000 Lumens
or brighter, Should supports sRGB 100% colour space to realise precise colour and Auto colour calibration to maintain
precise colour consistency over extended operating periods, 20000 hrs. laser life, WUXGA (1920 x 1200 pixels) native
1 MR display or better, Contrast ratio(Dynamic) min. ∞:1 or better, Reality Creation, Inputs: 5BNC, Mini D-sub 15-pin (In & nos 1 5,212,187.08 5,212,187.08
Out), DVI-D, HDMI, HDBaseT, USB . Lens: Long Throw or Its EQUIVALENT SPECIFICATIONS.The item to include all
nessecary cables from control room complete as per instructions of engineer- in- charge.
Highly transparent and extra-wide metallic Pepperscrim for both front and rear projections for holograms.
Product : 3 D Projection Mesh Screen
Material : Polyster
2 MR Screen Size : As per site Sqm 12 99,297.00 1,191,564.00
No. of Holes : 23 Holes / Inch
Transparency : 89 %
Material Type : Stretchable or Its EQUIVALENT SPECIFICATIONS
Tree projection system on approximate plan area of 200 sqm
Three Chip LCD or Three Chip DLP Laser projector with Auto Filter cleaning along with suitable lens, Min. 20,000 Lumens
or brighter, Should supports sRGB 100% colour space to realise precise colour and Auto colour calibration to maintain
precise colour consistency over extended operating periods, 20000 hrs. laser life, WUXGA (1920 x 1200 pixels) native
3 MR display or better, Contrast ratio(Dynamic) min. ∞:1 or better, Reality Creation, Inputs: 5BNC, Mini D-sub 15-pin (In & nos 1 7,860,482.56 7,860,482.56
Out), DVI-D, HDMI, HDBaseT, USB . Lens: Long Throw or Its EQUIVALENT SPECIFICATIONS. The item to include all
nessecary cables from control room complete as per instructions of engineer- in- charge.
The outdoor enclosure shall be suitable for permanent installtion of large format video projectors/laser in any climate, for
video mapping, out - door attractions, adveryising and outdoor movies. Enclosure shall be fitted with all the new features
including the following :
1. Light Weight Aluminum Welded Construction.
2. Powerful AC Fan
4 MR 3. Salt Fog Filtering, with positive pressure option. nos 2 383,599.82 767,199.64
Local TCP/IP or web Based Monitoriing service.
Enclosure shall consist hydrophobic inlet filters and shall black salt and other pollutants from getting near the
projector/Laser. Enclosure shall be designed to protect the projevctor/laser from damaging elemenmts such as dust,
smoke, heat, cold and mositure. The enclosure shall be controlled thorugh RDM panel via DMX Signal. or Its EQUIVALENT
Laser Projector for facade : Area : 30 m x 12 m
Three Chip LCD or Three Chip DLP or better Laser projector with complete dust protection as per IP60 standards along
with Short throw lens, Min. 23,000 ISO Lumens or brighter ,Should have RB laser for more realistic & saturated colours
and should atleast achieve the REC709 Colour standard, 20000 hrs. laser life, WUXGA (1920 x 1200 pixels) native display
or better,Contrast ratio(Dynamic) min. 10000:1 or better, 24/7 operation ,PC 3D ready ,Anamorphic ready, Filterless
operation with liquid cooled technology,Inputs: 1 x Display port, , 2 x HDMI, 1 x HDBaseT, 3G-SDI in/out Controls: 3D
sync in/out, RS232 . Lens :Long Throw or Its EQUIVALENT SPECIFICATIONS. The item to include all nessecary cables from
control room complete as per instructions of engineer- in- charge.
Laser projection control system
Three Chip LCD or Three Chip DLP Laser projector with Auto Filter cleaning along with suitable lens, Min. 12,000 Lumens
or brighter, Should supports sRGB 100% colour space to realise precise colour and Auto colour calibration to maintain
precise colour consistency over extended operating periods, 20000 hrs. laser life, WUXGA (1920 x 1200 pixels) native
display or better, Contrast ratio(Dynamic) min. ∞:1 or better, Reality Creation, Inputs: 5BNC, Mini D-sub 15-pin (In &
Out), DVI-D, HDMI, HDBaseT, USB . Lens: Long Throw or Its EQUIVALENT SPECIFICATIONS. The item to include all
nessecary cables from control room complete as per instructions of engineer- in- charge.
Supplying, Installation , Testing and commissioning of 3D Projection mapping software, Playback control System to
manage, schedule and control the media outputs. It should have direct control on inputs and media timelines. It should
7 MR have an option of being controlled by an external unit integrated with the software. to complete the job with all respects. lot 1 2,812,222.62 2,812,222.62
or Its EQUIVALENT SPECIFICATIONS. The item to include all nessecary cables from control room complete as per
8 MR instructions of engineer- in- charge. Per mtr 500 456.02 228,007.50
Cabling and Laying (OFC/ Network/ Snakes for sound & projector)
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming
coat of approved steel primer using structural steel etc. as required.
10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 2750 142.30 391,325.00
Precession Air conditioners for Control room CRV Type (N+1) or Its EQUIVALENT SPECIFICATIONS
Supply, installation, testing and commissioning of DUAL COIL MICROPROCESSOR BASED PRECISION A/C UNITS as per the
specifications complete with air cooled condenser, chilled water coil and variable speed drive for condenser fan, scroll compressor, evaporator
coil with hydrophillic coating, EC brushless motor, backward curved/ direct driven fan, first fill of refrigerent, 24 hrs performance test with
necessary heat load, multistage electric heater, variable capacity humidifer and vibration isolator. Motor shall be suitable for 415 + 10% volts,
50 cycles, 3 phase AC supply and external static pressure shall be 25 Pa. Outdoor unit motor should be with IP-54/55 protection and should be
weather proof. PAC shall have bottom throw.
Each unit shall be complete with powder coated electrical panel and double earthing. The cables should be Cross linked
polythene insulated, armoured Copper cabling, with a low smoke and flame sheath (XLPE/SWA/LSF) and all termination
between main panel and PAC should have double compression gland. Timers shall be provided in Electrical panel for
delayed start of units.
It shall be inclusive of copper piping (of required length), drain piping, control & power cabling from MCB to indoor unit &
it shall also include MCB, GI tray for supporting the refrigerant pipes (whereever exposed to sun) between indoor and
Units shall be equipped with factory integrated 2 way automatic control valve with thermostat. It shall also provided with
automatic balancing valve.
The unit capacities shall be after taking deration into account due to copper piping lengths. Condensers should be
adequately sized for high ambient temperatures upto 42.2 Deg C (New Delhi Conditions) with condensing temperatures
not exceeding 56 Deg C.
The unit should include INTEGRATOR for giving industry standard (Modbus / Lon Works / Bacnet) output to BMS system.
Mapping shall be required for all points displayed on precision unit microprocessor panel. It shall be inclusive of wiring in
MS conduit between integrator and individual PAC panel.
CHW units shall be capable for delivering 6 TR actual total capacity at below rated chilled water conditions :
Chilled Water Inlet to PAHU's : 6.7 Deg C (44 Deg F)
Chilled Water Outlet from PAHU's : 12.2 Deg C ( 54 Deg F)
The air cooled units shall be complete with copper refrigerant piping with nitrile rubber insulation as per specifications.
6 (3+3) TR Dual Coil (chilled water & DX air cooled) Microprocessor units for Server Room complete as required
Unit described as required complete in all respect.
10 MR Supplying, installation, testing and commissioning of (N+1) 30 kVA online double conversion fully microprocessor based ,indoor type, Set 2 1165270.33 2330540.66
compact UPS system of mentioned rating with designed output PF 1 at 40 degree and IGBT based PWM technology with external Isolation
transformer to achieve THD < 5% and input power factor of greater than 0.95 at 50% loading, Efficiency >= 93% at 50 % load, suitable for
three phase AC input voltage 320 V to 480 V, 50 Hz +3% / - 3 % and three phase AC output voltage 415 ± 1% volts & frequency 50 ± 0.5 Hz
with all components as mentioned in BOQ, specifications and schedule, complete as required and as per technical specification. Each unit shall
be comprising of the following: Total 2 no.s (In parallel)
a 125% rated Rectifier cum charger unit +100% rated Invertor, Integrated in UPS module
b 100% rated Inbuilt static switch at the invertor output + 2 Nos. 100% rated Inbuilt static switches at the static bypass line.
c 100% rated Inbuilt Maintenance Bypass.
d Web-enabled Monitoring and Management through SNMP protocols for multi-OS environments.
e Inbuilt feature required for input phase seq protection and automatic change. UPS should work on mains and should not go to battery
mode in case of input phase sequence change.
f Supplying, unloading, installing testing and commissioning of necessary VRLA batteries of suitable size having 30 minutes
back up time UPS for full load to be provided. 1 No spare batteryof same AH to be provided and cost to be added.
Note : Concerning vendor needs to furnish the battery sizing calculations at the time of GA approval and battery size has to be as per
the approved GA drawing.
g Supply, unloading, installation testing & commissioning of matching cabinet/open racks to house above mentioned batteries for
40 KVA UPS system along with suitable size interconnecting cable (for UPS to Battery and battery to battery), MCCB etc. complete as required
& as per specifications.
h Supply,installation testing and commissioning of UPS monitoring software suitable for RJ-45 communication and capable of giving
pop up messages for all alarms received from UPS. All shall be capable of the following:-
i Giving notifications like e-mail, paging notification, broadcast notification, battery replacement notification, run event-based scripts.
j Event logging, data logging and action logging (with date, time, description of fault and event).
k Run the battery diagnostic test.
l Automated unattended shutdown of computers.
m Local notification through audible alarm.
n Software should support :
latest version of Microsoft Windows/ Server, AIX, HP-UX, Sun Solaris, Linux, Novell Netware, MAC
o Harmonic Filter 100 amps.
p Isolation Transformer 60KVA
13 MR Video Wall for branding (near boundary wall): Wall area - 3.84m x 2.88m + 10% no 1 4628175.278 4628175.278
Display Size (W x H) 3.84 meter ( Width) x 2.88 meter (Height)
Pixel Pitch 6 mm
LED Configuration RGB 3 in 1 SMD
Pixel Density Minimum 27,777 pixels per sqm or higher
Brightness 5000-6000 cd/m² or better
Maximum Power Consumption 850 w/sqm or lower
Average Power Consumption 267 w/sqm or lower
Power Input 100 ~ 240 VAC
Access For Maintenance Rear
IP Level Front IP65 / Rear IP54
Horizontal Viewing Angle(° ) 160
Vertical Viewing Angle(° ) 140
Brightness Uniformity ≥97%
Contrast Ratio 26-07-1900 08:01:00
Drive Mode Constant Current Drive
Frame Rate(Hz) 50&60
Refresh Rate(Hz) ≥1920
Lifetime(hrs) 100000
International Safety Certifications (Mandatory to submit ) BIS Registration ( Bureau Of Indian Standards)
Media Player Features
Media player should be have features of Android-based Content Player, Infographic Advertisement, Video & Audio
Advertisement, News Listing with the Help of RSS Feed, Ticker Display, Power Point Presentation and PDF Display, Digital
Menu Board for Various Industries, Current Weather and Pollution Updates with RSS feed
Suitable LED controller with HDMI and DVI signal input ports with HDMI signal loop output port, Maximum input
resolution: 1920*1200 pixels, Maximum loading capacity: 2.30 million pixels , Maximum Width: 4096pixels, Maximum
Height: 2560 pixels , 4 Gigabit Ethernet outputs support screen arbitrary splicing , Dual USB2.0 for high speed
configuration and easy cascading , Support brightness and chromaticity adjustment , Improved grayscale performance at
low brightness , Support HDCP1.3
Auto Brightness sensor Monitor the ambient brightness to achieve automatic brightness adjustment of LED display
Solution Compatibility Complete solution should be from same/Equivalent compatible OEM brand to ensure smooth
integration and avoid compatibility issues during implementation phase
Quality Certifications Quality Management System 9001:2015
Mounting Structure & Installations
MS Structure with Installation as per LED wall size to be provided by bidder
or Its EQUIVALENT SPECIFICATIONS
14 MR Creation of mapping projection content (20 minutes) as per approval of CLIENT lot 1 6,000,000.00 6,000,000.00
A For Amphitheater
Wall Mount Speaker: It should be 2 ways. Passive Should Have a Power Handling of 800 W or better at Nominal
Impedance of 8 Ohm LF Transducer must be of min 15" or better HF Transducer must be of min 3" Compression driver or
1 MR better It should have a Sensitivity (1W @ 1m) of 97 dB or better Min. Coverage Angle Should be of (H x V) 80º x 50º or Nos. 4 221,215.92 884,863.67
better It should have a Min Frequency Range of 50 Hz - 16 KHz (-3 dB) or better Connections should be of 2 x XLN4 or Its
EQUIVALENT SPECIFICATIONS
Subwoofer: It should be a Passive subwoofer Should have a Power handling of 1400 W RMS or better Should have 2 x
18" transducers at a Nominal Impedance of 4 Ohm It should have a Sensitivity (1W @ 1m) of 103 dB or better Must have
a Max SPL of : 136 dB or better It should have a Frequency Range of 36 Hz - 250 Hz or better or Its EQUIVALENT
Amplifier for Wall Mount Spk: It should be of Class 2H Type. It should have min 2 channel Should have W/Ch @ 8 Ohm
600 W or better.
Should have W/Ch @ 4 Ohm 1000 W or better Frequency Range should be 20 Hz - 20 Hz or better. It should have a
THD+N of <0.05% or better
3 MR It should have an S/N Rate of >100 dB or better. Damping Factor Should be >200 or better It should have a Dynamic Nos. 1 283,446.76 283,446.76
Range of >80 dB or better It should have a Gain of 26/32 dB or better Should have an Input Impedance of 20 KOhm
balanced and 10 KOhm unbalanced. Input Sensitvity should be of 13 dBu / 6.97 dBu or better or Its EQUIVALENT
Amplifier for Subwoofer: It should be of Class 2H Type. It should have min 2 channel Should have W/Ch @ 8 Ohm 600 W
or better. Should have W/Ch @ 4 Ohm 1000 W or better Frequency Range should be 20 Hz - 20 Hz or better. It should
have a THD+N of <0.05% or better It should have an S/N Rate of >100 dB or better. Damping Factor Should be >200 or
4 MR better It should have a Dynamic Range of >80 dB or better It should have a Gain of 26/32 dB or better Should have an Nos. 1 233,029.75 233,029.75
Input Impedance of 20 KOhm balanced and 10 KOhm unbalanced. Input Sensitvity should be of 13 dBu / 6.97 dBu or
better or Its EQUIVALENT SPECIFICATIONS
DSP: It should have a Matrix with 4 inputs (balanced) and 8 outputs (balanced). It should contain Inputs parameters as
such Type : Electronically balanced The DSP should have a Frequency response of 20 Hz – 20 kHz to 0dBu +1/-3dB or
better It should have a Distortion (THD/N) of : < 0.01% @ 0dBu 1kHz or better It should contain Output Parameters as
such Type : Electronically balanced It should have a Maximum output level of +20 dBu or better SNR should be 108 dB or
better System Crosstalk Parameters must contain the following
Input to Output should be -90 dBu or better Adjacent channels should be - 90 dBu or better Noise Gate parameters
must contain the following Threshold range should be of - 80 dBu - +20 dBu or better
Attack time should be 0.5 ms – 200 ms or better Release time should be 5 ms – 2s or better Compressor parameters
5 MR must contain the following. Nos. 1 143,456.24 143,456.24
It should have a Threshold range of - 30 dBu - +20 dBu or better It should have an Attack time of 10 ms – 150 ms or
better It should have a Release time of 10 ms – 1s or better It should contain a Ratio of 1:1 to 24:1 Gain Should be +24
dB. Equalization parameters must contain the following It should have 8 parametric filters per input, Peak and Shelving
(Low and High) type. It should have 8 parametric filters per output, Peak and Shelving (Low and High) type. Crossover
Parameters must contain the following It should have 20 high-pass filters (Butterworth, Bessel and Linkwitz-Riley of
different order). It should have 20 low-pass filters (Butterworth, Bessel and Linkwitz-Riley of different order) or Its
EQUIVALENT SPECIFICATIONS
Analog Mixer: Audio mixers with 12 MIC/LINE channels. It should have a USB player /recorder. It must contain Bluetooth
functionality. It should have Built-in DSP with 99 effects. It should have 3 tone control on each input channel. It Should
contain 2x7 bands equalizer. It Should have an AUX send/return connectivity. MIC Input Parameters must contain the
following It should have a Gain Range of +10 to + 60 dB. It should have Max Input Level of +12dBu @10dB Gain. It should
6 MR have an S/N Ratio of 110dB/112dB A-Weighted (0 dBu IN @ +22dB Gain). Line Input. Parameters must contain the Nos. 1 66,079.61 66,079.61
following It should have the Gain Range of -10dB to +40dB. It should have Max Input Level of +30dBu. Equilization
Parameters must contain the following It should have a Treble of 12Khz ± 15dB. It should have a Middle of 3Khz ± 15dB. It
should have a Bass of 80Hz ± 15dB. Max output Level should be ±28dBu. or Its EQUIVALENT SPECIFICATIONS
Wireless Handheld Mic: It should contain a Frequency range of 610 - 640 MHz It should have IR synchronism between
receiver and microphones. It should have an LCD display with AF, RF, gain and frequency information. It should contain
Manual adjustment, free frequencies scan and squelch level functions. Ithe receiver should have Balanced and mix
unbalanced outputs.RECEIVER parameters should contain the following Should have a Frequency band of UHF true
Diversity or better Should have a Bandwidth of 25 kHz or better
Should have a Frequency response of 20 Hz - 20kHz or better It should contain a Stability of ±0.0005% or better It should
have a Sensitivity of 12dBuV (80dB S/N) or better The S/N Ratio should be >105dB (A) or better The Dynamic range
7 MR Should be >100dB or better Max. Audio output should be -10dB HANDHELD MICROPHONE parameters should contain Nos. 1 295,497.72 295,497.72
the following It should be a Dynamic mic Polar Pattern should be Cardioid It should have an RF output power of Lo: 5mW
/ Hi: 30 mW or better It should have a Spurious emission of --60dB or better.
Maximum deviation should be ±48kHz or better S/N Ratio should be >105dB (A) or better It should have a THD of
<0.5% or better.
Continuous using should be 8 hours or better. or Its EQUIVALENT SPECIFICATIONS
Wired handheld Mic: It should be a Moving coil dynamic type mic.
The Polar Pattern should be Hyper-cardioid It should have a Frequency Response of 50Hz~16KHz or betterIt should have
a Sensitivity of -71dB±3dB (0dB= 1V/Pa a 1KHz) or better It should have an Ouput Impedance of 370Ω±20% or better.
or Its EQUIVALENT SPECIFICATIONS
B For Gallery Area
Wall mount Speaker: It shuld have an LF Transducer of 1 x 8" Diameter + 2" Voice coil speaker. HF Transducers Should
be of 1 x 1" Exit, 1" Voice coil, ring polymer diaphragm at Nominal Impedance of 8 ohm. MS Power Should be 150 W or
better Program Power should be 300 W or better Peak Power should be 600 W or better. It should contain a
Transformer having 60W @ 100V, 30W @ 70V or better It should have a Sensitivity (2.83v @ 1m) of 96 dB SPL or better
1 MR It should have a Peak SPL of 124 dB or better. It should have a Frequency Range of 90 Hz to 20kHz (-10dB), 102 Hz to Nos. 6 52,207.03 313,242.18
19kHz (-6dB) or better Horizontal Coverage should be (-6dB) 80° or better Vertical Coverage Should be (-6dB) 80° or
It should have an IP Rating of IP54 or better or Its EQUIVALENT SPECIFICATIONS
Amplifier: It should be of Class 2H Type. It should have min 2 channel
Should have W/Ch @ 8 Ohm 450 W or better. Should have W/Ch @ 4 Ohm 750 W or better Frequency Range should be
20 Hz - 20 Hz or better.
It should have a THD+N of <0.05% or better It should have an S/N Rate of >100 dB or better. Damping Factor Should be
It should have a Dynamic Range of >80 dB or better It should have a Gain of 26/32 dB or better Should have an Input
Impedance of 20 KOhm balanced and 10 KOhm unbalanced. Input Sensitvity should be of 13 dBu / 6.97 dBu or better. or
Its EQUIVALENT SPECIFICATIONS
Audio Mixer: Analog Mixer: Audio mixers with 12 MIC/LINE channels.
It should have a USB player /recorder. It must contain Bluetooth functionality. It should have Built-in DSP with 99 effects.
It should have 3 tone control on each input channel. It Should contain 2x7 bands equalizer. It Should have an AUX
send/return connectivity. MIC Input Parameters must contain the following It should have a Gain Range of +10 to + 60
dB. It should have Max Input Level of +12dBu @10dB Gain.
3 MR It should have an S/N Ratio of 110dB/112dB A-Weighted (0 dBu IN @ +22dB Gain). Line Input. Parameters must contain Nos. 1 66,079.61 66,079.61
the following It should have the Gain Range of -10dB to +40dB. It should have Max Input Level of +30dBu. Equilization
Parameters must contain the following It should have a Treble of 12Khz ± 15dB. It should have a Middle of 3Khz ± 15dB.
It should have a Bass of 80Hz ± 15dB. Max output Level should be ±28dBu. or Its EQUIVALENT SPECIFICATIONS
FAÇADE LIGHTING
Supply, Installation, Testing & commissioning of IP67 RGBW LED Neonflex for Even light distribution without any any hot
spots with silicon moulded diffuser compatible to be controlled directly by DMX512. LED Neon flex having CRI>80 and
luminous flux of 50-60 lumens/W. Power consumption of LED strip should not be more than 10-12 W. Led life span
MR L70/B10@50,000 hrs LED strip should have minimum bending radius of 120-150 mm. Operating temperature range of Meters 250 9,950.24 2,487,560.59
the product should be in between -10 degrees Celsius to +50 degrees Celsius. Complete with all related accessories.
RGBW Or its Equivalent specifications
Power Supply for Required LED Neonflex as per fixture requirement I.e 24VConstant Current output and 240-220 V AC
input. Or its Equivalent specifications
SITC of 2 Output compact DIN Rail Mount DMX Splitter Or its Equivalent specifications
Supply, Installation, Testing and commissioning of Content Program Controller , 2x512 DMX ports controls more than 300
light addresses, Works as a stand-alone or computer driven controller, Secure Digital (SD) card drive for flexible show
storage ,USB 2.0 interface for downloading shows and configuring from PC,-Flexible, adaptable mounting options ,Should
MR be provided with light show authoring software, Direct line voltage power supports 100—240VAC,Minimum 12 Nos 1 222,766.62 222,766.62
configurable effects, Using light show authoring software to select from standard 12 effects, adjust effect settings such as
color, speed, and brightness. Or its Equivalent specifications
SITC of 6 Output DIN Rail Mount DMX Splitter.
- Fully isolated Outputs to Split/Boost DMX Input.
- Compact Din Mount Size
MR - Terminal Block Connectors for easy solderless termination. Nos 30 39,830.67 1,194,920.15
- Incl. External Power supply with built-in protection for Short circuit / Overload / Over voltage / Over temperature.
UL508 & EN50082-2 certified Or its Equivalent specifications
Supply, Installation, Testing & commissioning of adjustable LED in ground uplighter with high performance led having
beam angle not more than 15-17 degrees protected to electrical class I, IP 67. Power consumption of product should not
be more than 9 W with integral driver Operating voltage 100-240Vac, frequency 50-60Hz. CCT of product should not be
more than 3000K and CRI should be minimum 80 .Product should have IP68 PG-11 cable gland & Luminaire hard wired
MR with 3 x 1.0mm2 cable of 0.5mts length. The product should be given with honey comb louvre for glare free lighting.The Nos 40 31,243.25 1,249,730.10
product should have mechanical protection of IK10 on the body and optical part. The product should have high pressure
die cast aluminium alloy body construction with 316 grade stainless steel front cover. The product should diffuser made
from tempered glass T=8mm withstand load of 2621kgs. Complete with all related accessories Or its Equivalent
Supply, Installation, Testing & commissioning of Led spot light having power consumption not more than 4-6 W and
luminous flux of minimum 330-400 lumens in 3000K CCT. CRI should be minimum 80, Led Life Span : L70 / B10@ 50,000
Hrs SDCM : ≤ 3. It should have integral driver with operating voltage 100-240Vac operating temperature 0°C~+50°C
,Power Factor : >0.9 THD : <20% Surge Protection : 1KV
Efficiency : >65%The product should have protection of electrical class I and ingress protection of IP65. It should have
mechanical protection IK06 on optical part. Body of construction should be die cast aluminum alloy. Luminaire primarily
coated with epoxy resin and top coated with UV stabilized polyester powder and cured in digital temperature controlled
chamber at 180-200 degrees C. Complete with all related accessories. Or its Equivalent specifications
Supply, Installation, Testing and Commissioning of LED RGBW Floodlight Luminaire for Facade lighting with die cast
aluminium housing, with powder coating of wattage 55W. Luminaire shall be capable of producing dynamic color
changing light with 16 million colors by DMX/Ethernet based control. The beam angle of the fixture shall be 10 deg. The
luminaire shall have high optical efficiency, anti aging and anti UV PMMA/PC lenses. Luminaire shall be complete with
driver and capable of operating at line voltage without any separate power supply from 120 to 270 V AC, 50 Hz, power
factor > 0.9. High power LED's shall be SMD type and fixture shall have system efficacy at System level (Not Chip Level)
>=40 LPW, Life of fixture (Including Driver): 50K Hrs. @ L70 Lumen maintenance at 35 °C Ambient Temperature. CRI ≥ 70
at 3000K, PF >0.90 & THD<20%, minimum Internal Surge Protection 3KV, 10 kV external surge protector, must be having
IP66 & IK 07 Impact rating & Approbation-CE along with IEC Classification Class I, RoHS. Cables Connectors in fixture to be
of IP67 for Male/Female connectors for DMX through wiring. Fixture shall be suitable to operate at ambient temperature
range of -10°C to +50°C. Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-
IES, LM 79, & TTC certificates should be provided from NABL accredited lab.
Certification: CE Certified, ROHS compliant, BIS Certification for Luminaires & Drivers ; Or its Equivalent specifications
Supply installation testing and Commissioning of DMX Wire 2Core 0.75 mm Shielded cable Network wiring consists of a
shielded twisted pair, with a characteristic impedance of 120 ohms, with a termination resist or at the end of the cable
farthest from the controller to absorb signal reflections Or its Equivalent specifications
1 2.4 Supplying and fixing following way, horizontal type three pole
and neutral, sheet steel, MCB distribution board, 415 V, on
surface/ recess, complete with tinned copper bus bar, neutral
bus bar, earth bar, din bar, interconnections, powder painted
including earthing etc. as required. (But without
MCB/RCCB/Isolator)
2 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"
curve, miniature circuit breaker suitable for inductive load of
following poles in the existing MCB DB complete with
connections, testing and commissioning etc. as required.
b 2.10.5 Triple pole and neutral Nos. 10 1,092.00 10,920.00
3 1.24 Supplying and fixing following modular switch/ socket on the
existing modular plate & switch box including connections but
excluding modular plate etc. as required.
c 1.24.4 3 pin 5/6 A socket outlet Nos. 32 111.00 3,552.00
d 1.24.5 6 pin 15/16 A socket outlet Nos. 2 175.00 350.00
4 1.28 Supplying and fixing following Modular base & cover plate on
existing modular metal boxes etc. as required.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor,
single core cable in surface/ recessed medium class PVC conduit as required.
Supply, laying and testing of under noted sizes of Aluminium conductor XLPE insulated PVC sheathed & sleeved
armoured and overall PVC sleeved 1.1 KV grade power distribution cables conforming to relevant IS code 7098 and as per
specification in ground (in existing trenches) through pipe or on wall / racks cable trays including dressing and clamping
the cable with MS zinc passivated clamps etc. as required.
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC
insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
Supply of under noted sizes of copper conductor insulated PVC sleeved 1.1 KV grade power distribution industrial flexible
cable/wires heavy duty conforming to relevant IS code and as per specification in ground (in existing trenches) through
pipe or on wall / racks cable trays including dressing and clamping the cable with MS zinc passivated clamps etc. as
MR 1 x 70 sq.mm PVC insulated flexible copper conductor cables RM 50 822.00 41,100.00
MR 1 x 50 sq.mm PVC insulated flexible copper conductor cables RM 100 566.00 56,600.00
MR 1 x 35 sq.mm PVC insulated flexible copper conductor cables RM 100 398.00 39,800.00
MR 1 x 16 sq.mm PVC insulated flexible copper conductor cables RM 100 183.00 18,300.00
MR 1 x 10 sq.mm PVC insulated flexible copper conductor cables RM 100 119.00 11,900.00
MR 1 x 6 sq.mm PVC insulated flexible copper conductor cables RM 100 68.00 6,800.00
Supply and making end termination with brass double compression gland including providing and crimping of copper
solderless lugs / ferrules for XLPE armoured power copper conductor cable 1.1 KV grade of following sizes:-
MR 1 x 70 sq.mm PVC insulated flexible copper conductor cables Nos. 10 255.00 2,550.00
MR 1 x 50 sq.mm PVC insulated flexible copper conductor cables Nos. 10 210.00 2,100.00
MR 1 x 35 sq.mm PVC insulated flexible copper conductor cables Nos. 20 186.00 3,720.00
MR 1 x 16 sq.mm PVC insulated flexible copper conductor cables Nos. 20 98.00 1,960.00
MR 1 x 10 sq.mm PVC insulated flexible copper conductor cables Nos. 20 67.00 1,340.00
MR 1 x 6 sq.mm PVC insulated flexible copper conductor cables Nos. 20 35.00 700.00
Supply and fixing of cable tray/steel work in position including clamps, frame work of flats, angle iron, channel with
5 MR fabrication work including cutting, bending, welding, drilling bolting etc. as per design as required. One coat of primer Kg 100 140.00 14,000.00
and 2 coats of enamel paint of approved shade shall be provided.
Supplying and installing following size of perforated GI Cable Trays with perforation not more than 17.5%, in convenient
6 MR sections, joined with connectors, suspended from the ceiling with GI suspenders including bolts & nuts, painting
suspenders etc as required.
MR 150 mm width X 50 mm depth X 1.6 mm thickness RM 30 740.00 22,200.00
MR 100 mm width X 50 mm depth X 1.6 mm thickness RM 20 560.00 11,200.00
MR 50 mm width X 50 mm depth X 1.6 mm thickness RM 20 370.00 7,400.00
Fabricating supplying installation of raceway on surface/ floor/ recess made of 2.0 mm thick factory fabricated GI Sheet
raceways height 40 mm and of totally enclosed with 2 mm thick covered with screw. Two lengths of channel and junction
7 MR box shall be joined together to make it dust proof. Chipping and removing screed to install the raceways in floor, including
removal and disposing of debris as per PMC instructions, finishing with PCC, providing chicken mesh and making good as
per Engineer in charge
MR 300 mm (wide) x 40 mm (height) RM 10 1,165.00 11,650.00
MR 100 mm (wide) x 40 mm (height) RM 20 790.00 15,800.00
MR 50 mm (wide) x 40 mm (height) RM 20 580.00 11,600.00
Fabrication. Supplying, installation of GI Junction Boxes 2 mm thick complete with 2 mm thick GI Covers with screw duly
8 MR providing rubber gaskets between the cover and the Junction Box, screws etc. as required complete.
MR 350 (lenght) x 350 (wide) x 50 (height) mm MS junction box. Nos. 5 1,270.00 6,350.00
MR 150 (lenght)x 150 (wide) x 50 (height) mm MS junction box. Nos. 8 865.00 6,920.00
MR 100 (lenght)x 100 (wide) x 50 (height) mm MS junction box. Nos. 10 640.00 6,400.00
9 MR Supplying and fixing of following size GI flexible pipe/ coupler on the
existing modular floor box / switch box including connections as equired.
MR GI Flexible pipe 25mm RM 10 35.00 350.00
MR GI Flexible pipe 32mm RM 15 55.00 825.00
MR GI Coupler for 25mm GI flexible pipe Nos. 20 22.00 440.00
MR GI Coupler for 32mm GI flexible pipe Nos. 20 37.00 740.00
MR Supplying and fixing of sepaker cable RM 300 45.00 13,500.00
MR Supplying and fixing of mike cable RM 300 65.00 19,500.00
10 Electrical Panel
Fabrication, supplying, installation, Testing & Commissioning of electrical panel of cubical construction, of suitable size
with 200 Amp TPN Aluminum Bus Bar insulated with heat shrinkable PVC sleeve, floorl mounted type, fabricated out
of 2mm.thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of
MR approved shade after 7 tank treatment process, cable alley, inter-connection, having following switchgears and Nos. 1 185,000.00 185,000.00
accessories mounting and internal wiring, earth terminals, numbering etc. Complete in all respect, suitable for operation
on 415 V, 3phase, with neutral 50 HZ. AC supply.
100 Amp FP MCCB 25KA - 1No
Indicating Light - 3Nos
Multifunction Meter with
RS485 communication port-1No
Control MCB-4Nos
OUTGOING FEEDER
63A FP MCB 10KA 5Nos
32A FP MCB 10KA -5Nos
ABSTRACT OF QUANTITIES AUDIO-VISUAL WORKS
S.No Item Description UoM Qty. Rate Total Cost (INR)
Supply, installation, testing, commissioning and programming of following items-
A Display System
65" 4K UHD LED display with 400 Cd/m2 brightess, Contrast ratio:1200:1, Resolution: 3840 x
2160 (16:9), Viewing angle: 178° h/v, Response time:8ms, Input ports: 2 x HDMI, 1 x DP, 1 x
1 65" LED Screen VGA, LAN, RS232 Control, 2 x 8W in built speakers, input HDMI, VGA, and USB, Landscape and NOS 6 282,278 1,693,669
Protrait Installation Option etc. The item to include mounting bracket and all other required
accessories complete. or its Equivalent specifications
55" Full HD LED display, HDMI X 2, VGA X 1, Video IN X 1, USB X 1, Audio IN X1, Audio Out X
1, SPDIF X 1, RS232C x 1, 20W in built speaker, IPS LED display, USB media player. The item to
2 55" LED Screen include mounting bracket and all other required accessories complete. or its Equivalent NOS 6 172,421 1,034,527
B Audio System -
Analog Mixer: Audio mixers with 24 MIC/LINE channels. It should have a USB player
/recorder. It must contain Bluetooth functionality. It should have Built-in DSP with 99 effects.
It should have 3 tone control on each input channel. It Should contain 2x7 bands equalizer. It
Should have an AUX send/return connectivity. MIC Input Parameters must contain the
following It should have a Gain Range of +10 to + 60 dB. It should have Max Input Level of
+12dBu @10dB Gain. It should have an S/N Ratio of 110dB/112dB A-Weighted (0 dBu IN @
DSP(digital signal
1 +22dB Gain). Line Input. Parameters must contain the following It should have the Gain NOS 3 350,892 1,052,676
Range of -10dB to +40dB. It should have Max Input Level of +30dBu. Equilization Parameters
must contain the following It should have a Treble of 12Khz ± 15dB. It should have a Middle
of 3Khz ± 15dB. It should have a Bass of 80Hz ± 15dB. Max output Level should be
±28dBu.or its Equivalent specifications
Ceilingspeaker 2-way built-in loudspeaker,Power rated-5W/10W/15W/8ohm, “the reference
loudspeaker”. It can be used with a standard Hifi amplifier and provides you with a Pro HiFi
sound. The loudspeaker has an enforced 6 ½” woofer and 1” tweeter.suitable for the
2 Ceiling Speakers distribution of Back Ground Music.The housing is made of high quality ABS.SPL 1 watt/1 m- NOS 23 13,984 321,643
92db,SPL Max peak-106db,Frequency Range-60Hz to 20Hz Dispersion @ 1 kH-180Deg,@4KHz-
80Deg,@8KHz-45Deg,IP-54 Rated.or its Equivalent specifications
Wallmount 2-way built-in loudspeaker,Power rated-5W/10W/15W/8ohm, “the reference
loudspeaker”. It can be used with a standard Hifi amplifier and provides you with a Pro HiFi
sound. The loudspeaker has an enforced 6 ½” woofer and 1” tweeter.suitable for the
3 Inwall Speakers distribution of Back Ground Music.The housing is made of high quality ABS.SPL 1 watt/1 m- NOS 12 14,106 169,273
92db,SPL Max peak-106db,Frequency Range-60Hz to 20Hz Dispersion @ 1 kH-180Deg,@4KHz-
80Deg,@8KHz-45Deg,IP-54 Rated. or its Equivalent specifications
The amplifier shall have four audio channels, each with its own input and output. Switches on
the rear panel shall allow the channels to be configured for 8Ω or 4Ω loads, or pair the
channels in bridged mono for 70V or 100V distributed lines. The amplifier shall be rated at
100 watts continuous per channel into 8Ω and 4Ω. In bridged mono it shall drive a 70V or
100V line loaded at up to 250 watts, with an 80 Hz high-pass filter to reduce risk of
4 Audio Amplifier loudspeaker transformer saturation. The amplifier shall be UL listed, CE and RoHS/WEEE NOS 3 246,856 740,568
compliant, and FCC Class B certified. The amplifier shall reside in a black 1 rack space high
(1.75 in), half rack wide chassis, with a mounting kit provided to allow rack mounting either
solo or two side-by-side. The mounting kit shall also allow for mounting to a surface, such as
a wall or the underside of a table.or its Equivalent specifications
Boundry layer Digital conference microphone.Frequency response : 40-16000Hz,Sensitivity : -
42dB±2dB,Speaking reference distance 20-120cm, Built-in 1W 8Ω loudspeaker,The indicative
lamp will on when open the microphone, Microphone was supplied power by main unit, Has
5 Microphone NOS 10 23,348 233,480
TALK button and indicative lamp, it can control speaking status freely. Has automatic closed
function : Microphone will off after speech in 45 seconds or its Equivalent specifications
C and Automation Control System -
Switcher 4x HDMI in: 19-pin type A,4x HDMI Out: 19-pin type A,6x Audio Out: RCA Female
Stereo (L/R),6x S/PDIF Out: RCA Female,2ch PCM | Multi Channel Up to 5.1 DTS and Dolby
Digital,1920x1080p @60Hz 12bit,Supported Standards DCI | RGB | HDR | HDR10 | Dolby
Vision | HLG | BT.2020 | BT.2100,Communication and Control HDMI 2.0 | HDCP 2.2 | EDID
Input supports DVI/D and DisplayPort Dual-Mode (DP++) v1.3 with adapter (not included),CEC
1 Switcher power triggering | Requires CEC compatibility,IR 1x Front Panel IR Sensor | Handheld IR NOS 3 202,675 608,025
Remote Included | 1x IR Ext 3.5mm (1/8in) TRS Stereo,RS-232,1x RS-232: 9-pin DB9 Female |
Matrix Control | Telnet commands supported,Ethernet 1x LAN: 8-pin RJ-45 Female | 10/100
Mbps auto-negotiating | Built-in Web UI | IP Control, Safety and Emission CE | FCC | RoHS,or
its Equivalent specifications
Wireless Presentation Device to be Input 4x HDMI 19-pin type A | 1x VGA 15-pin DSUB15
VGA 1x Audio In (VGA Audio) 3-pin Screw Down Phoenix Connector,output 1x HDMI 19-pin
type A | 1x Audio Out 3-pin Screw Down Phoenix Connector 1x Ethernet 8-pin RJ-45 female -
10/100/1000 Mbps auto-negotiating,Audio Formats 2ch PCM,Output Video Encoding
H.264/MPEG-4 AVC,Encoding Data Rate 31 Mbps | Configurable,End to End Latency Low
Latency Mode: 60~90ms | High Latency Mode: 250~300ms,Video Resolutions (Max) HDMI:
1920x1080p @60Hz 16bit (7m/23ft) | VGA: 1920x1080p @60Hz 16bit (7m/23ft) Ethernet:
Wireless presentation 1920x1080p @60Hz 16bit (100m/328ft Point to Point),HDMI HDMI 1.3 | HDCP 1.4 | DVI/D NOS
system supported with adapter (not included) ,Ethernet 1x 8-pin RJ-45 female - 10/100/1000 Mbps
auto-negotiating,RS-232 1x RS-232 1 (Switcher Control) 3-pin Phoenix Connector | 1x RS-232
2 (Device Control) 3-pin Phoenix Connector,Hardwire Contacts 1x Contact In 5-pin Phoenix
Connector | 1x LED Out 6-pin Phoenix Connector,Multiple control methods: front panel
display buttons, built in Web UI,contact closure panels, and RS-232 or IP control systems with
standard accessories as required. or its Equivalent specifications
Should be able to reclocks and equalizes the signal and distributes it to 8 identical outputs. or
3 Distribution Amplifier NOS 3 116,770 350,311
its Equivalent specifications
Should allow the Lighting Control and programming according the to the requirement for
4 Lighting Controller NOS 3 86,746 260,239
specific activity. or its Equivalent specifications
32 Port control Systems and master space controller (Kramer Control brain) that can operate
over Ethernet with control interfaces that include: 8 bidirectional RS−232, 8 IR, 8 GPI/O, and 8
5 Controller NOS 3 131,939 395,817
relays. Network Support — 10/100/1000Mbps Ethernet or its Equivalent specifications
6 Ipad Ipad 32GB with Controller App or its Equivalent specifications NOS 3 36,360 109,079
Network Switch 24 ethernet port 10/100/1000 PoE+ stackable switch with 4 SFP+ ports and 2
7 Network Switch fixed power supplies. (Make- CISCO-L3 or equivalent). or its Equivalent specifications NOS 3 98,792 296,377
D Video Conferencing System -
Communication Method: SIP, H.323 Video Compression Method: H.261 (mainstream) H.263,
H263+, H.263++ (reception only), H.264 High Profile, H.264 Baseline Profile No. of Channels:
G.711/G.722/G.722.1/G.722.1 Annex C: 1 MPEG-4 AAC-LD Mono: 1/ MPEG-4 AAC-LD Stereo:
1 Video Conference System 2 Remote Camera Control: H.224, H.281 (Zoom/Pan/Tilt/Preset) Encryption: SRTP (AES 128 NOS 2 407,777 815,554
bit), H.235 (AES 128 bit) or its Equivalent specifications
Multi Point Video
2 4-way HD continuous presence. or its Equivalent specifications NOS 2 136,999 273,998
Conferencing License
Should be equipped with a professional 1/2.8 inch image sensor with Full HD 1080p output
resolution and a high dynamic image quality of 60 frames per second.
Must have 20x optical zoom lens with professional noise reduction and wide dynamic range
technology to deliver a clear image even in low light, backlight or the extreme contrast of
brightness and darkness in the room.
3 Full HD PTZ camera The camera must utilize a highly efficient DC motor servo controller to achieve high-speed, NOS 2 269,420 538,839
quiet and precise positioning movements. It should support 3G-SDI, DVI, component, and C-
Video interfaces allowing four simultaneous image
outputs with the best possible image quality and compatibility with all video equipment. or
its Equivalent specifications
Grand Total ₹ 9,417,973.22
Grand Total ₹ 9,417,973.22
ABSTRACT OF QUANTITIES FOR SOLAR PANELS
S NO. DSR Description Unit Qty Rate Amount
1 SOLAR PANELS
Supply, Installation, Testing and Commissioning of on grid Solar
Delhi Schedule of
Photovoltaic Power Plant conforming to MNRE specifications
Rates & Delhi Analysis
as amended, consisting of Mono/ Poly Crystalline silicon solar
1 of Rates (E&M) (Item
cells, net metering facility, necessary protections, earthing,
for Solar Photovoltaic
mounted on Aluminium/ GI structure of suitable strength with
following components complete as required:-
a)Solar Photo voltaic Module of capacity 330W por above,
manufactured in India, conforming to IS 14286/ IEC61215, IS/
IEC61730 - Part - 1, IS/IEC61730 - Part - 2. Solar Photo voltaic
Module conversion efficiency shall not be less than 16.5%. PV
modules used in solar power plants / systems must be
warranted for their output peak watt capacity ,which should
not be less than 90% at the end of 10 years and 80% at the end
b)Power Conditioning Unit (PCU) of 350-800 V DC Input
voltage range and 400 V AC, three phase, 4 wire, 50 Hz+/-
2.5Hz, output voltage suitable to generate AC Power with
efficiency not less than 97%, total harmonic distortion less
than 3% and suitable for ambient temperature from 0 to 50
degree C. The PCU shall adjust the voltage and frequency level
to suit the Grid Voltage Frequency.
c) Data Monitoring System complete with accessories.
d) Fixing of Array junction box & Main junction box with IP65
protection and termination arrangement for incoming and out
going cable along with glands, lugs and other accessories etc.
e) Lightning and surge voltage protection.
f) Connections & Interconnections by supplying & fixing
required size XLPE insulated copper conductor 1.1kV grade
armoured power and control cables between solar modules,
main power cable to grid supply PCU unit along with supplying
& fixing of necessary channel/ conduit lugs and other
accessories etc. as required.
ABSTRACT OF QUANTITIES FOR FIRE FIGHTING
S NO. Description Unit Qty DSR Rate DSR Amount NS Rate NS Amount
Surface dressing of the ground including removing
1 2.28 vegetation and inequalities not exceeding 15 cm deep and
2.28.1 disposal
soil lead up to 50 m and lift up to 1.5 m. SQM 35.00 28.15 985.25
2 2.6.1 Earth work in excavation by mechanical means (Hydraulic
excavator)/manual means over areas (exceeding 30 cm in
depth, 1.5 m in width as well as 10 sqm on plan) including
getting out and disposal of excavated earth lead upto 50 m Cum 148.00 205.45 30,406.60
and lift upto 1.5 m, as directed by Engineer-in-charge.- All
3 2.25 Filling available excavated earth (excluding rock) in
trenches, plinth, sides of foundations etc. in layers not
exceeding 20cm in depth, consolidating each deposited Cum 54.00 253.95 13,713.30
layer by ramming and watering, lead up to 50 m and lift
Disposal of surplus earth by mechanical transport including
4 1.1.2 loading, unloading for a lead upto 10 Km.
Providing and laying in position cement concrete of
specified grade excluding the cost of centering and
4.1 shuttering - All work up to plinth level :
1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone
5 4.1.8 aggregate 40 mm nominal size)
Providing and laying in position ready mixed or site batched
design mixcement concrete for reinforced cement concrete
work; using coarseaggregate and fine aggregate derived
from natural sources, PortlandPozzolana / Ordinary
Portland /Portland Slag cement, admixtures
inrecommended proportions as per IS: 9103 to accelerate /
retard settingof concrete, to improve durability and
workability without impairingstrength; including pumping
of concrete to site of laying, curing, carriagefor all leads;
but excluding the cost of centering, shuttering, finishingand
reinforcement as per direction of the engineer-in-charge;
for thefollowing grades of concrete.
Note : Extra cement up to 10% of the minimum specified
cement contentin design mix shall be payable separately.
In case the cement contentin design mix is more than 110%
of the specified minimum cementcontent, the contractor
shall have discretion to either re-design the mixor bear the
cost of extra cement
All works upto plinth level
Concrete of M25 grade with minimum cementcontent of
Steel reinforcement for R.C.C. work including straightening,
cutting, bending, placing in position and binding all
5 5.22 complete upto plinth level.
5.22.6 Thermo-Mechanically Treated bars KG 6,120.00 89.65 548,658.00
Centering and shuttering including strutting, propping etc.
6 5.9 and removal of form for :
Foundations, footings, bases of columns, etc. for mass
a 5.9.1 concrete
Walls (any thickness) including attached pilasters,
butteresses, plinth and string courses etc.
Providing and fixing 1st quality ceramic glazed floor tiles
conforming to IS : 15622 (thickness to be specified by the
manufacturer ) of approved make in all colours, shades
except burgundy, bottle green, black of any size as
7 11.37A approved by Engineer-in-Charge in skirting, risers of steps sqm 82 938.50 76,957.00
and dados over 12 mm thick bed of cement Mortar 1:3 (1
cement: 3 coarse sand) and jointing with grey cement slurry
@ 3.3kg per sqm including pointing in white cement mixed
with pigment of matching shade complete.
Providing and mixing integral crystalline admixture for
water proofing treatment to RCC structures like basement
raft, retaining walls, reservior, sewage & water treatment
plant, tunnels / subway and bridge deck etc. at the time of
transporting of concrete into the drum of the ready-mix
truck, using integral crystalline admixture @ 0.80%
(minimum) to the weight of cement content per cubic
meter of concrete) or higher as recommended by the
manufacturer’s specification in reinforced cement concrete
8 22.22 at site of work. The material shall meet the requirements as kg 250 332.40 83,100.00
specified in ACI-212-3R- 2010 i.e. by reducing permeability
of concrete by more than 90%, compared with control
concrete as per DIN 1048 and resistant to 16 bar
hydrostatic pressure. The crystalline admixture shall be
capable of self-healing of cracks up to a width of 0.50mm.
The work shall be carried out all complete as per
specification and the direction of the Engineer-in-charge.
The product performance shall carry guarantee for 10 years
against any leakage.
Supplying, installation, testing and commissioning of
Electric driven Main Fire Pump suitable for automatic
operation and consisting of following, complete in all
1 1 respects, as required:
(a) Horizontal type, multistage, centrifugal, split casing
pump of cast iron body & bronze impeller with stainless
steel shaft, mechanical seal conforming to IS 1520.
(b) Suitable HP Squirrel cage induction motor, TEFC,
synchronous speed 1500 RPM, suitable for operation on
415 volts, 3 phase 50 Hz, AC supply with IP 55 protection
for enclosure, horizontal foot mounted type with Class-'F'
insulation, conforming to IS-325.
(c) M.S. fabricated Common base plate, coupling, coupling
guard, foundation bolts etc. as required.
(d) Suitable cement concrete foundation duly plastered
with anti vibration pads.
Supplying, installation, testing and commissioning of diesel
engine driven main fire pump suitable for automatic
operation and consisting of following, complete in all
2 2 respects, as required : (Diesel Driven Pump)
Horizontal type, multistage, centrifugal pump of cast of iron
body and bronze impeller with stainless steel shaft,
mechanical seal conforming to IS 1520.
Suitable HP, 1500 RPM water cooled with radiator, diesel
engine conforming to relevant IS standard complete with
auto starting mechanism, 12 /24 volts electric starting
equipment, diesel tank, exhaust pipe extended upto 10 m
outside pump house duly insulated with 50 mm thick glass
wool with 1.0 mm thick aluminium sheet cladding,
residential silencer, instruments and protection as per
standard specification, stop solenoid for auto stop in the
event of fault with audio indications, painted with post
office red colour etc. as required.
M.S fabricated, common base plate, coupling, coupling
guard, foundation bolts etc. as required.
Suitable cement concrete foundation duly plastered and
with anti vibration pads.
Supplying, installation, testing and commissioning of
electric driven pressurisation pump suitable for automatic
operation and consisting of following, complete in all
3 3 respects, as required : (Jockey Pump)
Horizontal type, multistage, centrifugal pump of cast iron
body and bronze impeller with stainless steel shaft,
mechanical seal conforming to IS : 1520.
Suitable HP squirell cage induction motor TEFC type
suitable for operation on 415 volts, 3 phase 50 Hz AC supply
with IP 55 class of protection for enclosure, horizontal foot
mounted type with Class-'F' insulation, conforming to IS :
M.S.fabricated Common base plate, coupling, coupling
guard, foundation bolts etc. as required.
Suitable cement concrete foundation duly plastered and
with anti vibration pads.
Fabrication, supply, Insallation testing & commissioning of
Electrical control panel of cubical construction, floor
mounted type, fabricated out of 2mm thick CRCA sheet,
compartmentalised with hinged lockable doors, dust and
vermin proof, powder coated of approved shade after 7
tank treatment process, cable alley, interconnection with
suitable size copper conductor cable/solid copper strip,
having switchgears and accessories, mountings and internal
wiring, earth terminals, numbering etc. complete in all
respect, suitable for main fire pump, pressurisation pump &
diesel pump set complete as per CPWD specification with
following in coming and Outgoings, suitable for operation
on 415V, 3 phase, 50Hz Ac Supply with enclosure
4 5 protection class IP 42 as required :
4.1 5.1 Incomings
250A, 50kA 4 Pole MCCB, Ics=100% Icu rating
Digital Voltmeter 0-500V with selector switch
Digital Ammeter (0-250 A) with selector swtich & CTs
LED type RYB phase indicating lamps, ON, OFF, trip
indicating lamps
Set of Copper Bus Bar 300A
( Note : All outgoing feeders for pumps should have digital
Ammeter with selector switches, and LED type ON, OFF, trip
indicating lamps)
125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic
Star/Delta starter suitable for 60 HP pump with overload
protection, current sensing type single phase preventor
complete with all acceessories and internal wiring required
for automatic operation, selector switch for local/remote,
auto/manual/OFF operation.
63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully
automatic Star/Delta starter with overload protection,
current sensing type single phase preventor complete with
all acceessories and internal wiring required for automatic
operation, selector switch for local/remote,
auto/manual/OFF operation.
Diesel Engine Control
Control for diesel engine comprising -
Automatic/Manual selctor switch & 3 attempt starting
device, timers and relays as required, push buttons,
start/stop in manual mode
Indicating lamp for high/ Low Lub. Oil pressure, High Water
Temp and Engine on indication
Battery charger suitbale for 12V/24 V DC with boost and
trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC
All standard relays and accessories for automatic operation
of diesel engine
System Controller
Designing, Supply, Installation, Testing and commissioning
of system controller to control operation of main electric
fire pump, diesel pump, Pressurization pump, Terrace
pump in sequence as per specification consisting of relays, Set 1 245,730.00 245,730.00
timers. Sensors, annunciation window for fault indication,
complete as per specification
Providing laying, testing & commissioning of 'C' class heavy
duty MS Pipe conforming to IS 1239/3589 i/c fittings like
elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in
ground including welding, excavation & providing cement
concrete blocks as supports, anticorrosive treatment with
coaltar/asphalt tape as per IS 10221, refilling the trench etc.
of following sizes complete as required.
Supplying and fixing Single headed external yard hydrant
valve with 1 No. 63 mm dia instantaneous FM
Gunmetal/Stainless Steel coupling and cast iron wheel, ISI
marked, conforming to IS 5290 (type A) with blank
6 10 Gunmetal/Stainless Steel cap and chain as required :
6.1 10.1 Single headed Gunmetal Set 8 7,494.00 59,952.00
Supplying, fixing, testing and commissioning of butterfly
valve of PN 1.6 rating with bronze/gunmetal seat duly ISI
marked complete with nuts, bolts, washers, gaskets
7 11 conforming to IS 13095 of following sizes as required :
Supplying, fixing, testing & commissioning of double
flanged sluice valve of rating PN 1.6 with non rising spindle,
bronze/gun metal seat, ISI marked complete with nuts,
bolts, washers, gaskets and conforming to IS 780 of
8 12 following sizes as required :
Supplying and fixing orifice plate made out of 6 mm thick
stainless steel (Grade 304) with orifice of required size to be
fitted between flange & landing valve of external and Each 8 1,291.00 10,328.00
internal hydrants to reduce pressure at the outlet to the
9 13 level of 3.5 kg/cm2 complete as required.
Providing, installation, testing and commissioning of non-
return valve of following sizes confirming to IS: 5312
complete with rubber gasket, GI bolts, nuts, washers etc.as
10 14 required :
Providing, installation, testing and commissioning of
stainless steel Y-strainer fabricated out of 1.6 mm thick
stainless steel, Grade 304, sheet with 3 mm dia holes with
11 15 stainless steel flange.
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe
with 63 mm dia male and female couplings duly bound with
GI wire, rivets etc. conforming to IS 636 (type-A) as required
Supplying and fixing first-aid Hose Reel with MS
construction spray painted in post office red, conforming to
13 17 IS 884 complete with the following as required.
20 mm nominal internal dia water hose thermoplastic
(Textile reinforced) type -2 as per IS: 12585
20 mm nominal internal dia gun metal globe valve & nozzle.
Drum and brackets for fixing the equipmets on wall.
Connections from riser with 25 mm dia stop gun metal
valve & M.S. Pipe and socket.
Supplying & fixing 63 mm dia gun metal short branch pipe
with 20 mm nominal internal diameter size nozzle
conforming to IS 903 suitable for instantaneous connection
14 18 to interconnect hose pipe coupling as required :
Supplying and fixing of fire brigade connection of cast iron
body with gun metal male instantaneous inlet couplings
complete with cap and chain as reqd. for suitable dia MS
15 19 pipe connection conforming to IS 904 as required :
Providing and fixing ISI Marked of approved make Fire
Extinguishers complete with all accessories as per
16 manufacturer's specifications.
MR CO2 gas nozzle type - 6.5 Litre capacity (IS:15683). Nos 12 13,171.37 158,056.40
Mechanical Foam gas cartridge type. 9 Kg capacity
ABC dry powder stored pressure type 6 kg capacity
Providing, jointing and testing of automaticaly operated
Halotron/ clean agent fire extinguishers(cap-
4kg,temperature rating-68degc,test pressure-30bar) Nos 4 10,336.34 41,345.36
complete with all accessories/fittings.
aoc.pdf
Download all tender documents and submit your bid