PROVN OF 04 X 1.5 TON SPLIT AC WITH STABILIZER, FALSE CEILING AND LED FITTINGS, RAIL MOUNTED MOBILE COMPACTOR AND 250 DESERT COOLER IN JCOS /OR OTM MD ACCN OFFICERS UNDER AGE B/R (SOUTH) NO II OF GE (SOUTH) SECUNDERABAD

Amount

M&L for Guardwel Rail Mounted Mobile Compactor 1 Bay 2 DFM, 2 SFM and 1SFFH 2080xL915xD915 for DFM & D457 for SF Total 6 Compactor bodies Each compactor body having 4 shelves making 5 compartments 4 x 5 =20 campartments. Technical Specifications: Manually operated & mechanically assisted mobile racks sliding smoothly & effortlessly on a pair of rails & providing maximum storage capacity by compaction.THE UNDERCARIAGE: • BASE FRAME: Base frame shall be fabricated in channel type from minimum 3mm thick MS Sheet size of channel 25mm x 100mm x 45mm. • GUIDE RAILS: The guide rails shall be made out of 30mm bright bar paced within ‘C’ channel size of 36mm x 24mm x 1.6mm thick which will be above the floor and are as per the international standard of safety. We provide slopes on both sides of the track. • SUPERSTRUCTURE: Super structure of the mobile storage system will consist of knock down type panels. All the components such as shelves, front panel, vertical rear panel, central partition will act as an integral member of the unit.SHELVES: Shelves made of 20SWG thick C.R.C.A quality steel having 8 folds each will be provided, each designed to carry a U.D.L of 50kgs. • VERTICAL PANEL: Vertical panel consists of the front, centre & rear panel shall be made out of 20SWG thick C.R.C.A prime quality steel & designed to take the load of shelves on clip arrangement. • DRIVE COVER PANEL: Made out of 20SWG thick C.R.C.A prime quality steel to cover the entire drive mechanism. • CENTRE PARTITIION: The centre partition will comprise of a full C.R.C.A prime quality 22G sheet. • CENTRAL LOCKING: System will provided with centralized locking arrangement on the last unit when all units are brought together, central lock when operated gets locked with the floor & does not allow access to the units. • DRIVE MECHANISM: Driving mechanism will be provided externally supported on special grade anti-friction bearing to have smooth & effortless movement. Entire mechanism or gear & sprockets shall be incorporated within the front panel provided in the front of the unit within an area of 1000mm x 200mm x 50mm. • INDEXING ARRANGEMENT: Self-sticking card holders (2 Nos) provided on the front panel for easy identification & retrieval. • DRIVING WHEEL: Fully powder-coated three pronged drive wheel for better torque & free movement of the rack over the guide rails. Rest all as specified in the drawing and directed by Engineer-in-Charge

M&L for Guardwel Rail Mounted Mobile Compactor 1 Bay 2 DFM, 2 SFM and 1SFFH 2080xL915xD915 for DFM & D457 for SF Total 4 Compactor bodies Each compactor body having 4 shelves making 5 compartments 4 x 5 =20 campartments.Technical Specifications: Manually operated & mechanically assisted mobile racks sliding smoothly & effortlessly on a pair of rails & providing maximum storage capacity by compaction.THE UNDERCARIAGE: • BASE FRAME: Base frame shall be fabricated in channel type from minimum 3mm thick MS Sheet size of channel 25mm x 100mm x 45mm. • GUIDE RAILS: The guide rails shall be made out of 30mm bright bar paced within ‘C’ channel size of 36mm x 24mm x 1.6mm thick which will be above the floor and are as per the international standard of safety. We provide slopes on both sides of the track. • SUPERSTRUCTURE: Super structure of the mobile storage system will consist of knock down type panels. All the components such as shelves, front panel, vertical rear panel, central partition will act as an integral member of the unit. • SHELVES: Shelves made of 20SWG thick C.R.C.A quality steel having 8 folds each will be provided, each designed to carry a U.D.L of 50kgs. • VERTICAL PANEL: Vertical panel consists of the front, centre & rear panel shall be made out of 20SWG thick C.R.C.A prime quality steel & designed to take the load of shelves on clip arrangement. • DRIVE COVER PANEL: Made out of 20SWG thick C.R.C.A prime quality steel to cover the entire drive mechanism. • CENTRE PARTITIION: The centre partition will comprise of a full C.R.C.A prime quality 22G sheet. • CENTRAL LOCKING: System will provided with centralized locking arrangement on the last unit when all units are brought together, central lock when operated gets locked with the floor & does not allow access to the units. • DRIVE MECHANISM: Driving mechanism will be provided externally supported on special grade anti-friction bearing to have smooth & effortless movement. Entire mechanism or gear & sprockets shall be incorporated within the front panel provided in the front of the unit within an area of 1000mm x 200mm x 50mm. • INDEXING ARRANGEMENT: Self-sticking card holders (2 Nos) provided on the front panel for easy identification & retrieval. • DRIVING WHEEL: Fully powder-coated three pronged drive wheel for better torque & free movement of the rack over the guide rails. Rest all as specified in the drawing and directed by Engineer-in-Charge

M&L for Point wiring complete with two runs of 1.5 Sq mm copper conductor (for Phase and neutral) PVC insulated unsheathed multi stranded ,copper conductor FRLSH cable of 1100V grade confirming to IS- 694 drawn through and including new PVC casing caping , ISI marked , including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness duly painted inner and outer side by anti corrosive paint for housing the switches,sockets,fan regulators etc and covered with 3mm thick plastic laminated sheet cover with cadmium plated screw ,cup washer etc. complete and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc for one 5 A socket outlet independent complete all as specified and as directed Note: The wiring shall be done in proper color coding using red,yellow,blue for phases , black for neutral and green for earth

S&F switch socket combination 2 in 1 ,3 pin 6 A including gang box complete all as specified and as directed

M&L for cross arms,bracings,supports,clamps and back plates fabricated from structural steel sections including nuts,bolts,washers,welding,bending cold or hot,drilling holes for bolts,in any shape of size 25x25x5mm thick as indicated or directed and inclusive of one prime coat,one under coat and one finishing coat of paint complete all as specified and as directed.

S&F Desert cooler electric driven (single phase), having nominal air flow capacity of 3500Cum per hour ,tank capacity not less than 55 litre.collapsible louvers to prevent dust and insects,ice chamber,3 speed control fan of six 406mm with motor 1350 RPM,auto fill system,water level indicator and thermal overload protector complete all as specified and directed. Make:Havells Cat No GHRACAWE220 or Equivalent of Bluestar/Voltas/Daikin

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in each built air ionser and Plasma filter for better indoor air quality with minimum 3 satar rating and EER 3.2 of capacity 1.5 TR Make: Carrier, Voltas, Bluestar.

Supply and fix Voltage stabilizer for automatic operation, single phase, neturally air cooled type indoor wall mounted type and designed for input voltage betwwen 170 to 250 volts with output voltage stabalized at 230 Volts with accurecy of + 2.5 volts and of capacity 4.0 KVA.

M&L submain witing with 2 runs of single core 4 sqmm PVC insulated FRLS multistranded 1100 Volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not less than 25mm dia including one run of single core 4 sqmm PVC insulated sheated multstranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board complete all as specified and directed

S& F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps (AC Box) complete all as specified and as directed Make: Havells, Legrand, Standard

M&L for Point wiring concealed conduit in wall with 1.5 Sq mm copper conductor single core PVC insulated cable FRLS type 1100 V grade multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1.6 mm thick MS, duly painted with red oxide metal primer including fixing / grouting sunken /surface as per site requirement covered with 3mm thick laminated sheet including running up 1.5 Sqmm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth doll for fixing the switches / sockets / requlators etc One light point controlled by one, one way switch 5A, SP complete all as specified and as directed.

All as per item No-11 here-in-above, but for one ceiling fan/exhaust fan point controlled by one switch through regulator

S&F modular switch 1 way 6A, 1 modular capacity 230 Volts complete all as specified and as directed. Note:Modular cover plate with frame, modular metal flush box and modular switches will be inclusive of rate quoted.

S&F modular ceiling fan requlator 2 module step type AC 240 Volts suitable for 1200/1400 mm sweep complete all as specified and as directed. Note: Modular cover plate with frame, modular metal flush box and modular switches will be inclusive of rate quoted.

S&F 15 watt surface mounted circular downlight with white powder coated polycarbonate housing and pressure diacast, heat sink having high efficiency and all including taking down complete all as specified and as directed Make: Philips/Wipro/Crompton/bajaj/havells

S&F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and as directed

S&F sheet metal enclusure MCB DB SPN 8 way double door with 200A rated bus bar 240 V double door with flush type locking system complete all as specified and as directed.

S&F MCB SP 6 to 32 Amps 240 Volts for fixing in MCB DBs complete all as specified and as directed

S&F MCB SPN 40 Amps volts for fixing in MCB DB's complete all as speified and as directed

M&L for submain wiring with two single core 10 sq mm PVC insulated cable FRLS type copper conductor multistranded 100Volts grade drawn through and including rigid PVC conduit and conduit accessories of 25 mm dia medium grade including running up two one of 10 sq mm copper conductor multistranded PVC unsulated FRLS cable as earth continuity conductor along the witing and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the complete all as specified and as directed. Note:- two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

S&F 12.0 mm thick gypsum board seamless false ceiling fixed with standard GI Section such as channels, angles the grid suspended with GI suspended and clear from soffit of slab with expension fasteners, gypsum board shall be fixed with screw to the ceiling section / grid. the board shall be 12.0 mm thick and soffit of board shall be finished with gypsum plaster and levelled to give flush look as per manufucturer's instructions including necessary cutting for light fitting, AC and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

S&F 12 mm thick toughened glass (figured) all sice grinding and polishing single / double door shutter having holes for fixing of door handles and cut outs for fising of top patch's and bottom patch's complete all as specified and as directed

S&F floor machine with both side movement (Capacity to hold/ lift glass in Kgs- 100 to 120 ) complete all as specified and as directed

S&F door handles straight H types Dia 30mm size 18" long stainless steel complete all as specified and as directed

S&F top patch made of stainless steel complete all as specified and as directed

S&F bottom patch made of stain less steel complete all as specified and as directed

S&F Pivot's for fixing of top patch's made of stain less complete all as specified and as directed

S&F door locks made of stainless steel for fixing on glass doors complete all as specified and as directed

Dismantling of wall and ceiling boards (fibre pulp insulation etc ) or insulation boards /slabs/blanks any thickness, including cover fillets complete all as specified and as directed.

Taking down chowkats with shutters (without taking off shutters from frame) of any descriptions Exc 1.5 Sqm and Not exc 4.0 sqm complete all as specified and directed

K LAKSHMAN SINGH AND CO (BID ID -3077298)

BEEGEE DESIGN SYSTEMS (BID ID -3083058)