Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.8 LAccepted-AOC MEGHDOOT HOTTEL MALL ROAD RANIKHET UTTARAKHAND | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹9.8 L+₹89,166 (10.0%)Rejected-Finance 41B 1H JAYANTIPUR PREETAM NAGAR ALLAHABAD | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹10.2 L+₹1.3 L (14.1%)Rejected-Finance 283 8B 11A GANGA ROAD SHIVKUTI PRAYAGRAJ U P PIN 211004 | PRAYAGRAJ | UTTAR PRADESH | 211004 | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹10.8 L+₹1.9 L (21.5%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 | |
| 5 | L5₹12.2 L+₹3.3 L (37.2%)Rejected-Finance | L5 | Rejected-Finance Being other than L1 |
| Sl No | Description | Qty | Unit | Airways Enterprises L5 | M/S Garg Sons L9 | K R GUPTA AND SONS L10 | Krishna Enterprises L7 | Bharat Trading Company L2 | AMRESH TRADERS L8 | PITAMBARI TRADERS L4 | gangotri enteriprises L6 | Comnet technologies L3 | R N KHARWAR & SONS L1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Disconnecting and taking down fans in any specification (wall/ exhaust / industrial air circulator etc) carefully for replacement of Unsv spares/ painting / re-location / open to body for re-winding incl removing to burn out winding cleaning prepairing for painting etc and taking safe custody for re-fixing etc complete all as specified and directed. Note : (i) Quoted rate shall be included cost of transportation charge from site to workshop and back (if required). (ii) Required spares shall be measured against respective items. | 400 | Each | 36 ₹14,400 | 80 ₹32,000 | 350 ₹1,40,000 | 52 ₹20,800 | 30 ₹12,000 | 50 ₹20,000 | 45 ₹18,000 | 650 ₹2,60,000 | 49 ₹19,600 | 15 ₹6,000 Lowest |
| 2.00 | M&L for re-fixing to fan in any specification repaired under above item No 1 on given location with fixing accessories and making connection using three core flexible copper cable drawn through in PVC flexible conduit pipe incl cleaning oiling/ greasing/ replacing minor spares as condensor/ connecting cable / Top plug / rubber packing washer/ fan canopy / mouting clamp with nut bolt washer etc complete all as specified and directed. | 400 | Each | 26 ₹10,400 | 80 ₹32,000 | 100 ₹40,000 | 32 ₹12,800 | 30 ₹12,000 | 55 ₹22,000 | 45 ₹18,000 | 50 ₹20,000 | 29 ₹11,600 | 15 ₹6,000 Lowest |
| 3.00 | M&L for painting to fan ( wall mouting/ exhaust / industrial air cerculator) body with sweep, stand etc all ,using shenthic enamel paint in two coats (one as finishing) over one coat red oxide primer spray by spray gun after removing/ scraping /cleaning to old fadded paint layers making smooth surface and Sr No marking in different colour with std size of letter complete all as specified and directed. Note : Colour of paint shall be approved by Deptt. | 400 | Job | 159 ₹63,600 | 80 ₹32,000 | 100 ₹40,000 | 125 ₹50,000 | 100 ₹40,000 | 120 ₹48,000 | 50 ₹20,000 | 40 ₹16,000 Lowest | 139 ₹55,600 | 67 ₹26,800 |
| 4.00 | M&L for re-winding to burn out winding of exhaust fan motor size of sweep upto 450 MM single phase electric driven heavy duty in any specification using super enamelled insulated copper wire with insulated material , varnishing, heating in existing qty, gauge, no of turns etc incl removing burn out winding repacement of bearing, packing, bushes nut bolt washer, re-assembling as same etc making serviceable complete all as specified and directed. | 200 | Job | 345 ₹69,000 Lowest | 650 ₹1,30,000 | 1,000 ₹2,00,000 | 400 ₹80,000 | 450 ₹90,000 | 385 ₹77,000 | 450 ₹90,000 | 500 ₹1,00,000 | 379 ₹75,800 | 530 ₹1,06,000 |
| 5.00 | All as above but here -in- before wall mounting / air cerculator etc fan motor size of sweep above 450 to 650 MM complete all as specified and directed. | 100 | Job | 385 ₹38,500 Lowest | 800 ₹80,000 | 400 ₹40,000 | 900 ₹90,000 | 450 ₹45,000 | 495 ₹49,500 | 500 ₹50,000 | 550 ₹55,000 | 399 ₹39,900 | 630 ₹63,000 |
| 6.00 | Supply and fixing in replacement spares parts as mentioned below sl No. (a) to (f) suitable for fan (ceiling/ wall/ exhaust / air cerculator /desrt cooler etc)) in any specification/ make /model etc in original manufacture complete.
(a) Ball bearings No 6200 /6201/6202/6203/ 6204 incl greasing / packing etc complete. | 300 | Each | 65 ₹19,500 | 100 ₹30,000 | 60 ₹18,000 | 56 ₹16,800 | 40 ₹12,000 | 150 ₹45,000 | 30 ₹9,000 Lowest | 45 ₹13,500 | 39 ₹11,700 | 30 ₹9,000 Lowest |
| 7.00 | (b) Heavy duty rubber seal/ packing washer in round shap. | 300 | Each | 35 ₹10,500 | 20 ₹6,000 | 5 ₹1,500 Lowest | 13 ₹3,900 | 15 ₹4,500 | 15 ₹4,500 | 20 ₹6,000 | 20 ₹6,000 | 34 ₹10,200 | 20 ₹6,000 |
| 8.00 | (c) Bushes suitable as above | 100 | Set of two | 35 ₹3,500 | 65 ₹6,500 | 15 ₹1,500 Lowest | 32 ₹3,200 | 20 ₹2,000 | 100 ₹10,000 | 60 ₹6,000 | 40 ₹4,000 | 89 ₹8,900 | 30 ₹3,000 |
| 9.00 | (d) Blade set for Ceiling fan 1200 mm with titing screw. | 60 | Set of three | 155 ₹9,300 | 300 ₹18,000 | 200 ₹12,000 | 130 ₹7,800 Lowest | 180 ₹10,800 | 185 ₹11,100 | 150 ₹9,000 | 200 ₹12,000 | 330 ₹19,800 | 300 ₹18,000 |
| 10.00 | (e) PVC sweep/ blade set for wall mounting fan/ air circulator 450-650 mm with titing screw. | 20 | Each set of three | 120 ₹2,400 | 600 ₹12,000 | 200 ₹4,000 | 140 ₹2,800 | 80 ₹1,600 Lowest | 180 ₹3,600 | 200 ₹4,000 | 200 ₹4,000 | 230 ₹4,600 | 265 ₹5,300 |
Tender Value
₹14.9 L
EMD Value
₹29,800
Closing Date
20 Sept 2025, 6:00 pmClosed
Col Manav Pant, CWE
HQ CWE (AF) Chakeri, Kanpur PIN - 208008
REPAIR/REPLACEMENT FANS CEILING FANS WALL MOUNTED FANS EXHAUST FAN AND OTHER CONNECTED WORK AT 24 ED MANAURI
2025_MES_727347_1
CWE(AF)/CHK/MNR/T-30 OF 2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
AGE(I) Manauri
Please refer tender documents
7 documents required · 7 mandatory
₹500
AGE(I) Manauri
₹29,800
5 Dec 2025
22 Aug 2025
22 Sept 2025
22 Aug 2025
20 Sept 2025
6 Sept 2025
Amount
Disconnecting and taking down fans in any specification (wall/ exhaust / industrial air circulator etc) carefully for replacement of Unsv spares/ painting / re-location / open to body for re-winding incl removing to burn out winding cleaning prepairing for painting etc and taking safe custody for re-fixing etc complete all as specified and directed. Note : (i) Quoted rate shall be included cost of transportation charge from site to workshop and back (if required). (ii) Required spares shall be measured against respective items.
M&L for re-fixing to fan in any specification repaired under above item No 1 on given location with fixing accessories and making connection using three core flexible copper cable drawn through in PVC flexible conduit pipe incl cleaning oiling/ greasing/ replacing minor spares as condensor/ connecting cable / Top plug / rubber packing washer/ fan canopy / mouting clamp with nut bolt washer etc complete all as specified and directed.
M&L for painting to fan ( wall mouting/ exhaust / industrial air cerculator) body with sweep, stand etc all ,using shenthic enamel paint in two coats (one as finishing) over one coat red oxide primer spray by spray gun after removing/ scraping /cleaning to old fadded paint layers making smooth surface and Sr No marking in different colour with std size of letter complete all as specified and directed. Note : Colour of paint shall be approved by Deptt.
M&L for re-winding to burn out winding of exhaust fan motor size of sweep upto 450 MM single phase electric driven heavy duty in any specification using super enamelled insulated copper wire with insulated material , varnishing, heating in existing qty, gauge, no of turns etc incl removing burn out winding repacement of bearing, packing, bushes nut bolt washer, re-assembling as same etc making serviceable complete all as specified and directed.
All as above but here -in- before wall mounting / air cerculator etc fan motor size of sweep above 450 to 650 MM complete all as specified and directed.
Supply and fixing in replacement spares parts as mentioned below sl No. (a) to (f) suitable for fan (ceiling/ wall/ exhaust / air cerculator /desrt cooler etc)) in any specification/ make /model etc in original manufacture complete. (a) Ball bearings No 6200 /6201/6202/6203/ 6204 incl greasing / packing etc complete.
(b) Heavy duty rubber seal/ packing washer in round shap.
(c) Bushes suitable as above
(d) Blade set for Ceiling fan 1200 mm with titing screw.
(e) PVC sweep/ blade set for wall mounting fan/ air circulator 450-650 mm with titing screw.
(f) GI "U" Clamp (set of two ) with nut bolt washers and rubber packing with split pin etc complete.
Supply and fixing stepped in replacement stepped type fan regulator make flush type and connecting up complete all as specified and directed.
Taking down fan, sealing cable end, dismantling blades and removing fan and blades and depositing it at MES store for NA complete all as specified and directed.
Supply new ceiling fan in size 1200 MM sweep white colour BEE 5 star rated copper wound energy saving with set of sweep/ extension rod / "U" clamp and other accessories single phase 50 Hzs Min air delivery 210 CFM with service value 6.00 BEE and Brush less direct current motor (BLDC) incl making electric connection using three core copper cable drawn through in PVC flexible conduit pipe complete. Note: (i) quoted rate include marking MES no. on ceiling fan. (ii) Quoted rated shall be included the cost of GI clamp made out strip in size 32 x6 MM with nut bolts washer etc all.
Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.
Supply and fixing in replacement of wall mounting fan heavy duty 450 mm sweep non capacitor bracket mounted type copper wound motor ISI marked 4 star rated energy saving with fixing accessories complete making necessary electric connection complete all as specified and directed. Note ; Old fan shall be deposited by contractor in MES Yard.
Supply and fixing in replacement exhaust fan 450 mm sweep steel body heavy duty with louver mounting bracket ISI marked 4 star rated energy saving less noise capacitor type incl making hole in brick wall plastering colour coading and all site required work for disturbed surface matching with existing and making electric connection using three core copper cable drawn through in PVC conduit pipe complete all as specified and directed.
All as above item No 17 but here-in-abive exhaust fan 300 MM sweep heavy duty steel body with louver mounting bracket ISI marked 4 star rated energy saving less noise capacitor type complete all as specified and directed.
All as above item No 17 but here-in-abive exhaust fan 300 MM sweep plastic body with louver mounting bracket ISI marked 4 star rated energy saving less noise capacitor type complete all as specified and directed.
Supply & fixing in replacement to fan condensor/ capacitors in rating 2.5 to 3.5 MFD complete all as specified and directed.
Supply only PVC insulation tap in 25 mm width 25 Mtrs long suitable for upto 1.1 KV ISI marked complete all as specified and directed.
Supply and fix in replacement motor for Air curtain made out of MS/CRCA sheet of minium thickness 18 gauge finished with two coats of red oxide primer and final coats of synthetic enamel paint (oven baked) with MS -CRCA 18 gauge square perforated suction grills , aluminium alloy fans and single phase electric motor nozzels etc complete with fittings and accessories so as to produce 1-1.5 M/sec air velocity at floor level for door opening in size 7 feet x 4 feet (52" x 90" ) complete all as specified and directed.
M&L for re-winding to burn out winding of air curtain unit motor for any size of single phase/ three phase electric driven heavy duty in any specification using super enamelled insulated copper wire with insulated material , varnishing, heating in existing qty, gauge, no of turns etc incl removing burn out winding replacement of bearing ,packing, nut bolt washer, re-assembling as same etc making serviceable complete all as specified and directed.
Supply and fixing in replacement extension rod for ceiling fan made out by light grade galvanised water tube 15 MM dia of bore in required length up to 1.5 Mtrs long incl cutting /making hole etc as site required complete all as specified and directed.
Supply and fixing temper proof energy meter in basic current rating 5 to 30 Amps and maxium 400 % , 220 volts single phase two wireconforming to STC with making all electric connection and mounting on teak wood board in suitable size complete all as specified and directed. Note ; Old meter shall be deposited by contractor in MES Yard.
Supplying and fixing smart single phase two wire dual source prepaid energy meters BIS 15884 marked in existing meter board / florr panels with pre payment capacity touch keypad based digital having current range 10-60 Amp 240 Volt accuracy class 1.0 alongwith parallel home display split unit with inbuilt load control switch containing provision for TOD and RTC, inbuilt feature to sense the DG mode through PLSI, dual source registration wrt grid as well as DG supply and dynamic load allocation facility from grid and DG, capable to define for tariff slabs, happy hours and holiday definition complete all as specified and directed.
S&F in replacement LED bollard 10 watt with coverage of 360º lighting area and IP65 protection luminaire, corrosion resistant complete with all accessories including making proper base structure for fitting complete all as specified and directed.
Taking down old unsv fitting and supply and fixing recess mounted LED downlight square/ round shape capacity 18 watt with PDC aluminium body and high transmittance diffuser and connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified and directed.
Supply and fixing low energy consumption 9W LED Inverter Bulb with 3 dimmable mode operation, 240Volts, 50Hz white light having brightness 900Lumen, with 4-10hrs power backup depending on different mode of operation complete all as specified and directed.
Supply and fixing in replacement LED inverter batten works on AC supply in Normal mode and DC supply in inverter mode ,with inbuilt battery back up of upto 4 hours with high efficiency and high lumen output complete all as specified and directed.
Bharat Trading Company (BID ID -3430902)
Comnet technologies (BID ID -3424453)
PITAMBARI TRADERS (BID ID -3424142)
Airways Enterprises (BID ID -3420535)
gangotri enteriprises (BID ID -3424009)
Krishna Enterprises (BID ID -3430518)
AMRESH TRADERS (BID ID -3430923)
M/S Garg Sons (BID ID -3423094)
K R GUPTA AND SONS (BID ID -3424034)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .