Renovation works to Kabini Canteen at IISc

Amount

Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches, cost of labour, complete as per specifications.

Removing white wash or colour wash by steel brushing and / or scraping, sand papering the ceiling and / or sloping roof surface smooth including repairs to scraches, cost of labour, complete as per specifications.

For washing the wall surface spoiled by smoke, soot, with clear water before sand papering the surface smooth including necessary repairs to scraches, cost of labour, complete as per specifications.

For washing the ceiling and / or sloping roof surface spoiled by smoke, soot with clear water before sand papering the surface smooth and including necessary repairs to scraches, cost of labour, complete as per specifications.

Repairs to plaster in patches of 2.5sqm and less in walls ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbish with a lead of 50m including curing cost of materials, labour, complete as per specifications.

Removing of existing old or broken wash basin/urinals and disposing it with all cost and conveyance labour for all items of work, HOM of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification and directions of the Engineer-in-charge of the work.

Removing of existing old Sanitary and plumbing pipelines, stacking and disposing it with all cost and conveyance labour for all items of work, HOM of equipment with all lead and lift, loading and unloading, transportationcharges and all other incidental charges etc., complete as per specification and directions of the Engineer-in-charge of the work.

Cleaning Quadrangle chajjas including removing of dirt dust etc., using suitable soap powder, coconut broomstick, squeezers/wipers/rubber rushes, coir brushes, plastic brushes, mugs, booster pumps with portable arrangement, hose pipe etc., complete excluding water charges including electrical charges and all safety measures.

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T & P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts complete as per specifications. ii) Dismantling brick/Tile work. B. In cement mortar.

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T & P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts complete as per specifications v) Steel work in all types of sections upto a height of 5m above plinth level excluding cutting of Rivet. - A. including dismembering.

Dismantling weather proof course and removing and conveying the debris to a distance upto 200m.

Dismantling mangalore tiles roof and stacking the material within a radius of 50 meters.with reepers

Dismantling plastering work including removing and conveying the debris to distance upto 200m including all lead, lifts, Loading and unloading and other including charges etc complete as per direction.

Earthwork excavation for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5m in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50m after breaking of clods complete as per specifications.

Filling available excavated earth (excluding rock) in sides of foundations upto plinth in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with lead upto 50m and lift upto 1.5m including cost of all labour complete as per specifications.

Providing and laying in position plain cement concrete of mix M 1:4:8 with OPC cement @ 180 kgs, with 40mm and down size graded granite metal coarse aggregates @ 0.85cum and fine aggregates @ 0.57cum machine mixed, concrete laid in layers not exceeding 15cms thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications.

Providing and laying in position plain cement concrete of mix M 1:2:4 with cement @ 240 kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.69cum and fine aggregates @ 0.459cum machine mixed, concrete laid in layers not exceeding 15cms thick, in foundation and plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications.

Providing and constructing granite / trap / basalt size stone masonry in foundation with cement mortar 1:6, stone hammerd dressed in course not less than 20 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications.

Providing and constructing load bearing wall with solid concrete blcoks having block density not less than 1800kg/m3 having a minimum average compressive strength of 4.00 N/mm2 confirming to IS 2185 (Part 1) : 2005 and constructed with CM 1:4, as per IS 2572:2005 including cost of materials, labour charges, scaffolding, curing, hire charges of machinaries etc., complete as per specifications. with solid concrete blocks of size 400 x 200x 200mm

Providing and constructing non-load bearing wall with solid concrete blcoks of size 400x100x200mm having a block density not less than 1800kg/m3 having a minimum average compressive strength of 4.00 N/mm2 confirming to IS 2185 (Part 1) : 2005 and constructed with CM 1:4, as per IS 2572:2005 including cost of materials, labour charges, scaffolding, curing, hire charges of machinaries etc., complete as per specifications.

Providing 12mm thick cement plaster in single coat with cement mortar 1:4, to ceiling including rounding off corners wherever required smooth rendering, Providing and removing scaffolding including cost of materials, labour, curing complete as per specifications.

Providing 18mm thick cement plaster in signle coat with cement mortar 1:6, to brick masonry including rounding off corners wherever required smooth rendering, Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.

Providing lime rendering for plastering to wall and ceiling smooth, including cost of materials, labour, curing complete as per specifications.

Providing and fixing plater mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chipped for services, junction materials, labour for fixing complete as per specifications. (length of mesh only be measured for payment)

Providing 20mm thick cement plaster in signle coat with cement mortar 1:3, to stone masonry and concrete surface including rounding off corners wherever required smooth rendering, Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.

Providing and mixing waterproofing compound in cement plaster work at one kg per bag or in the proportion recommended by the manufacturers, for cement mortat 1:4, 18mm thick cost of materials complete as per specifications.

Providiing rough cement platering 15mm thick in single coat with cement mortar 1:4,to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.

Providing and injecting chemical emulsion for Pre constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits, with chloropyriphos emulsifiable concentrates of 20% concentration, including cost of chemical, diluting in water to one percent concentration, labour, HOM of equipments, complete as per specification. (Plinth area of the building at ground floor only shall be measured)

Fixing of door frame in an existing opening including embeeding frame in floor and walls after dcutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50m including cost of materials, labour charges, complete as per specifications.

Providing TMT steel reinforcement for RCC work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. for TMT Bars Fe 550

Providing and laying in position reinforced cement concrete of design mix M25 with OPC cement @ 340 Kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.70cum and fine aggregates @ 0.47cum, with superplastisiser @3 lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not excceding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintles and beams retaining walls, return walls, walls (any thickness) including attached plasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM of machinery, curing, complete as per specifications.

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1 m in depth including cost of all materials, labour complete as per specifications.

Providing and laying flooring with M 15 cement concrete, 40mm thick using broken granite 20mm and down size laid to line and level in one layer and finish with a floating coat of neat cement, including cost of materials, labour, curing, complete as per specifications.

Providing and fixing Vitrified glazed tiles of approved make, quality & colour of size 600x600x10 mm thick fixed on existing flooring with special adhesive for flooring, skirting and jointed with neat cement slurry mixed with pigment to mach shade of tiles, including providing spacers at required interval and removing stains etc., complete as per specification.

Providing Ceramic tiles of approved make, shade and size for flooring treads of steps and landings laid on a bed of 12mm thick, cement mortar 1;3 mix, flush pointing with white cement using colour pigment, including cost of materials, labour, curing, complete as per specifications. for Ceramic tiles of size 30X30cms 6mm thick

Providing skirting, dado, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Colour glzed tiles 30x45 cms 6mm thick with border of size 30x10 cms.

Providing and laying flooring with burnt stone slabs 10cms thick, rough chistle dressed on cement mortar bed 1:6, 25MM thick, and pointed with cement mortar 1:3 including cost of materials, labour curing complete as per specifications.

Providing and laying heavy duty cobble stones 60mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per sqm over 50mm thick sand bed (average thickness) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level, including cost of materials, labour and HOM of machineries complete as per specifications.

Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as pr the specification.

Providing and applying painting in two coats with plastic emulsion paint of approved brand on ceiling and/or sloping roof surface to give an even approved shade after throughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications.

Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after throughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications.

Providing and finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifungal paint for top coat of approved brand and shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications.

Applying red lead ready mix priming coat over new steel or other metal surface including preparing the surface after throughly cleaning oil, grease, dirt and other foreign matter, and scoured with wire brushes, fine steel wool, sand papers including cost of materials, labour, complete as per specifications.

Providing and applying enamel metal paint two coats (excluding priming coat) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications.

Providing and fixing 65mmX125mm GRP Doorframe fabricated using E-Glass Chopped Strand Mat (CSM). U.V-stabilized Isopthalic Gelcoat and Isopthalic resin. The thickness of the GRP skin shall not be less than 2.0mm. The doorframe consists of four segmens, which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in ad are joined together by means of screws. The GRP frame shall be provided with wooden reinforcement of 6 locations for high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium density foam/Plaster with fibre reinforcement. Six numbers of 260mmX25mmX5mm size 'S' shapped M.S. flat hold fast shall be provided with the frame.

Providing and fixing factory made single leaf rigid GRP Sandwich composite door shutter of 40mm thick, laminated with two GRP skins with wood grain finish, fabricated using U.V. stabilized Isopthalic Gelcoat and one layer of 450 gms E-glass Chopped Strand Mat (CSM), impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.5mm Expanded Polystyrene (EPS) structural foam panel of 37mm thickness and a density of 20 kg/m3 shall be used as core material. Wooden reinforcements made of Seasoned Salwood block of cross section not lessthan 36mmx32mm and also necessary salwood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles, etc. shall be provided. A structural adhesive compatible with EPS foam shall be used for bonding the core material, the salwood reinforecment and the skins. The material and process for manufacturing the door shutters shall confirm to RV-TIFAC Composites Design Centre Standards and specifications and the door shutters tested in confirmation to IS 4020-1994. The finish of shutter will be plain colour white/IVORY/beige/light grey or any other colour using high quality pigments. Excluding cost of fixtures and inclusive of supply of shutters to respective work sopt.

Providing & fixing of 2 Track x 2 Panel Sliding door/windows made out of multi chambered uPVC (Matching to RAL-9016) sections and with minimum TiO2(Titaninium Dioxide) at 6 PHR with TPV(Thermo Plastic Valcanised)and lead free,gaskets-grey color having isolated drainage and reinforced with Galvanised Iron profile through out the window frame.The outer frame having a overall size of 44mm width x 40mm height with reinforcement of 1mm thickness and Sash with overall size of 27mmx53mm with UPVC honeycomb structure inside in lieu of GI reinforcement.Glazing bead for fixing of glass shall be of size 9.5mmx21.5mm.Windows shall be provided with 5mm plain float glass,standard hardware & single point locking system with crescent locks.Wall thickness of frame & sash shall be of 2mm-2.5mm.Maximum possible size-2419mm x 2500 mm.

Providing & fixing of 3 Track x 2 Panel Sliding windows made out of multi chambered uPVC (Matching to RAL-9016) sections and with minimum TiO2(Titaninium Dioxide) at 6 PHR with TPV(Thermo Plastic Valcanised)and lead free,gaskets-grey color having isolated drainage and reinforced with Galvanised Iron profile through out the window frame.The outer frame having a overall size of 108mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mmx75mm with GI reinforcement of 2mm and mesh sash of size 30mmx48.5mm.Glazing bead for fixing of glass shall be of size 20mm x 24mm.Windows shall be provided with 5mm plain float glass,standard hardware & single point locking system with touch lock.Wall thickness of frame & sash shall be of 2mm-2.5mm.Maximum possible size-2419mm x 2119 mm.

Providing & fixing of openable window made out of multi chambered UPVC(matching to RAL-9016)sections and with minimum TiO2(Titanium Dixide)at 6 PHR with TPV(Thermo Plastic Vulcanized)and lead free with gaskets-grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the openable frame.The frame having overall size of 60mm x 55mm with GI reinforcement of 1 mm thickness and openable sash with overall size if 60mm x 75 mm and GI reinforcement of 1.5mm thickness.Glazing bead for fixing of Glass shall be of size 20mm x 34mm.Windows shall be provided with 5mm plain float glass,Standard hardware with friction hing &Multi point locking system with Handle.Wall thickness of frame & sash shall be of 2mm-2.5mm.Maximum possible size-900mm x 1819mm.

Providing & fixing of louvered ventilators made out of multi chambered UPVC(matching to RAL-9016) sections and with minimum TiO2(Titanium Dixide)at 6 PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets-grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame.The frame having overall size of 39mmx39mm with GI reinforcement of 1 mm thickness.Louver clip in aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4mm pin head glass.Wall thickness of frame shall be 2mm.Maximum possible size-100mm x 1000mm.

Providing and fixing M.S. grill work for windows and ventilators weighing 21 kg/sqm using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM complete as per specifications.

Providing and fixing in position collapsible steel shutters with single or double leaf with vertical channel 20 mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size, with top and bottom rails of T iron sections of 40x40x6 mm with 38mm dia steel pulleys complete with bolt and nuts, locking arrangements, stoppers, handles on both sides with 7.5cms openings at 10cms. c to c applying a priming coat of red lead paint, cost of materials, labour, HOM of machinery complete as per specifications.

Providing and fixing mortise locks heavy duty to doors.incuding cost of materials,labour,HOM complete as per specifications

Providing and fixing hydraulic door closures-with mounting heavy duty.incuding cost of materials,labour,HOM complete as per specifications

Providing and laying in position plain cement concrete of mix 1:2:4 with cement @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878cum and fine aggregates @ 0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, including cost all materials, labour, HOM of machinery, curing complete as per specifications.

Providing 20mm thick cement plaster in single coat with cement mortar to WPC brick & concrete surfaces including rounding off corners wherever required smooth rendering,/tread marking : Providng and removing scaffolding, including cost of materials, labour, curing complete as per specifications.

Supplying and Installing Tensile square umbrella with side pipe 25mm and Centre Pipe 5' (38mm OD) including extension pipe.Fabric 580 gsm polyster.PVC Coated.Concrete round Plate 28" dia to place the centre rod. Excavation for Foundation of buildings,water supply,sanitary lines,electrical conduits either in pits or in trenches where excavtion width is above 600mm below 1.5 ts.add 25% extra and for width upto 600mm add 50% extra for respective rates due to restricted conditionds

Wall bores in brick masonry upto 45 cm thick and Refinish with CC 1:4 as per directions including all lead, lifts, Loading and unloading and other including charges etc complete as per direction.

Providing and fixing in position in cement concrete 1:3:6 steel glazed windows and ventilators side hung/top hung kfully openable as per approved drawings using Z angles of 25x33x3mm, weighing 1.419 Kg/m both for outer and inner frames and central mullion section of size 25x46x3mm weighing 2.28 Kg/m duly providing T section 19x19x3mm weighing 0.839 Ksg/m kfor glzing of windows not more than 34 cms. c to c including providing and fixing 4mm thick reeded glasswith teakwood beading of required size, all steel sections should confirm to IS 7452:1990, 4 nos. of holdfasts of approved size, section should be cut to length welded and electrically grinded sub dividing frames of unit shall be tenonned and revetted into the frames electrically. All the steel surface shall be throughly cleaned free of rust and painted with one coat of anti-corosive paint and finishing with two coats of ready mix paint of approved colour and make including cost of materials, fixtures, labour and HOM of machinery complete as per specifications. Specification No. KBS 7.12.1/7.12.2/7.12.3/7.12

Providing and fixing white vitreous china clay, flat back wash basin size 550x400mm with pedstal a single 15mm C.P brass pillar tap with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour ,all lead,lifts, Loading and unloading and other including charges etc complete as per direction.

Providing and fixing 600x450mm bevelLead edge mirror of superior glass with 6mm hard board backing and fixed to wooden cleats with C.P screws, washers, all lead,lifts, Loading and unloading and other including charges, including cost of materials, labour complete as per specifications

Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern n CC 1:2:4 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot) 10 cms x 7.5 cms including all lead,lifts, Loading and unloading and other including charges etc complete as per direction.

Providing and fixing 7.5 cms to 15.00 cms dia NP grating 100 mm dia. including all lead, lifts, Loading and unloading and other including charges etc complete as per direction.

Providing and fixing unplasticised PVC connection pipe with brass union 15mm nominal bore 450mm length of PVC connection including cost of all materials, all lead,lifts, Loading and unloading and other including charges etc complete as per direction. labour and HOM of equipments with all leads complete as per specifications

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. Spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (external works) 32mm nominal OD pipes

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. Spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.,) 25mm nominal OD pipes

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete. (external work).25mm nominal OD pipes

Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00kg/sq.cm working pressure 40mm outside diamete with special flage, compression type fittings, wall clips, making good the wall, ceiling and floor including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. Specification No.KBS 13.2.15.1/13.9 for internal water supply connection

Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00kg/sq.cm working pressure 90 mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. Specification No.KBS 13.2.15.1/13.9for internal water supply connection

Providing and fixing to wall, ceiling and floor, low density polyethylene pipes 6.00 kgf/sq.cm working pressure 110mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor including all lead, lifts, Loading and unloading and other including charges etc complete as per direction. cost of all materials, labour charges, HOM of equipments and testing complete as per specifications.

Constructing brick masonry inspection chamber 450x450mm, and 450mm depth, ( clear inside dimension ) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover with frame (light duty) 450x450mm depth beyond 450mm

Providing and placing on terrace, polyethylene water storage tanks as per IS 12701 : 1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications. (For 1000 litre capacity) Specification No. KBS 13.22

Constructing brick masonry inspection chamber 600X600mm, and 450mm depth, (clear inside dimension) for single pipeline, using table moulded non-modlular bricks of class designation 50 in cement mortar 1:5, C.I cover with frame (light duty) 600X600mm internal dimensions, total weight of cover with frame to be not less than 38kg (weight of cover 23kg and weight of frame 15 kg) R.C.C. top slab with cement concrete M 15 mix 20mm and downsize granite metal, foundation concrete M 5 with 40mm and dowsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications.

Constructing brick masonry inspection chamber 455X610mm, and 450mm depth, (clear inside dimension) for single pipeline, using table moulded non-modlular bricks of class designation 50 in cement mortar 1:5, C.I cover with frame (light duty) 455X610mm internal dimensions, total weight of cover with frame to be not less than 38kg (weight of cover 23kg and weight of frame 15 kg) R.C.C. top slab with cement concrete M 15 mix 20mm and downsize granite metal, foundation concrete M 5 with 40mm and dowsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications.

Loading , Tansportation ans unloading of debris from a lead of 25 kms with all lead and lift complete as per specification The rate shall be inclusive of all taxes and GST etc,. and work shall be carried out as per the technical specifications and instructions of Engineer in charge.

Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED light fighting 1 x4'- 20/22 w

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Complianceto IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency>1301m/w, nominal CRI >75.Luminaire manufacturer should have in-house facility accredited by NABLICPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved I Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 25watts

Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency>1301m/w, nominal CRI >75. Luminaire manufacturer should have in- house facility accredited by NABLICPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved I Embossing on the die cast housing/ Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Floodlight 120W

Supply of LED pole mounting type post top lantern with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/ clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr@ Lumen Maintenance of 70%, CCT > 5500K, I P 66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor>0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss- wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 1 OOV to 270V 50/60Hz application. Compliance to IS 10322/1 EC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB LED Efficiency>1301m/w, nominal CRI >75. Luminaire manufacturer should have in- house facility accredited by NABLICPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved I Embossing on the die cast housing/ Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Post Top Lantern with 35 watts

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50mm conduit in brick wall

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50mm conduit CC floor

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia ................................................................................... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20mm dia 2mm thick

Supplying heavy gauge PVC conduit pipe ……mm dia ................................................................................. mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thick

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300mm etc. as required. 20mm

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300mm etc. as required. 25mm

Supplying And Fixing M.S. Rafter Clamp Set made out of M.S. Flat & 14mm M.S. rod.

Supplying and flush mounting powder coated I galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3Way

Supplying and flush mounting powder coated I galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall4-5Way

Supplying and flush mounting powder coated I galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way

Supplying and flush mounting powder coated I galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8Way

Supplying and flush mounting powder coated I galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module

Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch

Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch

Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket

Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator.

Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch

Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293. 6Amps Bell push

Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch

Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket

Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293. TV/Telephone socket

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latestamendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latestamendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr upto 6Mtrfrom tapping point to out let via switch

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latestamendments) with a 6Amps flush type SP control switch shall befixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr upto 1OMtr from tapping point to out let via switch

Supplying PVC/GI flexible conduit pipe .. mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminatedcompletely 20mm

Supplying PVC/GI flexible conduit pipe .. mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminatedcompletely 25mm

Wiring for lighting/power circuit using one of FRLS PVC insulated 11OOV grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring withspecified IS-694:confirming to latest amendments. 1.5 sqmm

Wiring for lighting/power circuit using one of FRLS PVC insulated 11OOV grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring withspecified IS-694:confirming to latest amendments. 2.5 sqmm

Wiring for lighting/power circuit using one of FRLS PVC insulated 11OOV grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring withspecified IS-694:confirming to latest amendments. 4 sqmm

Wiring for lighting/power circuit using one of FRLS PVC insulated 11OOV grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring withspecified IS-694:confirming to latest amendments. 6 sqmm

Wiring for lighting/power circuit using one of FRLS PVC insulated 11OOV grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring withspecified IS-694:confirming to latest amendments. 10 sqmm

Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size mm conduit using necessary machine screws. 80mm

Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size mm conduit using necessary machine screws. 110mm

Supplying and fixing regular MCB distribution boards on wall I wood board I flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting Made out of 14 SWG MS enclosure.II -Double Door 8Way SP &N

Supplying and fixing regular MCB distribution boards on wall I wood board I flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting Made out of 14 SWG MS enclosure.II -Double Door 4Way TP &N

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Typecurve, indicator ON/OFF, energy cross-3with Short circuit breaking capacity of 1 OK and complete wiring as required confirming to IEC 60898.6-32Amps SP

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 1 OK and complete wiring as required confirming to IEC 60898. 6-32Amps DP

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 1 OK and complete wiring as required confirming to IEC 60898. 40 Amps TPN

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 1 OK and complete wiring as required confirming to IEC 60898. 50-63Amps TPN

Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V up to 300mA sensitivity on existing wood/panel board. 32-40 Amps 4 pole

Supply and fixing of 4pole power contactor with NO/NC contacts onexisting wood/panel board using ecessary bolts, nuts,washers and wiring etc., complete with AC-3 Rating and as per IS-13947 .25 Amps

Supply and fixing of 4pole power contactor with NO/NC contacts onexisting wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.40 Amps

Fabricating supplying and mounting MS box made out . SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with ?tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 16SWG

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per ISspecification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Aluminium Strips

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per ISspecification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminium Strips

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a cc chamber of 400x400x400mm with a cast iron cover. The earth electrode shallhave staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from theelectrode is to be established through GI strip using GI bolts andnuts.

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS- 13947. (lea= lcs)FOUR POLE 160Amps 25kA.

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LTnetwork with I P 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter.

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A C. 50 Hz 12/24v D.C.

Supplying of on load change over switches 4 poles, AC- 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 100Amps

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.12"x12"x2"

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws 20"x20"x2.5"

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat .with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint40x40x6mm

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat .with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint50x50x6mm

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat .with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm channel

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 4 core 16 sqmm

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 3.5 core 25 sqmm

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe I stoneware pipe I on wall/ on pole as required.In existing trench/duct. 6 sqmm to 16 sqmm

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe I stoneware pipe I on wall/ on pole as required.In existing trench/duct.95 sqmm to150Sqmm

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe I stoneware pipe I on wall/ on pole as required.In existing trench/duct.6 sqmm to 16 sqmm On wall/Structure

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe I stoneware pipe I on wall/ on pole as required.In existing trench/duct.25 sqmm to 75 sqmm On wall/Structure

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete.(As per Civil SR KSRB 1-2, P-7) In soil (ordinary)

Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable.

Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV40mm

Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV50mm

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)19/20mm

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)32mm dia

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)45mm dia

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)75mm dia

Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. 150x50mm

Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. 300x50mm

Supplying tinned copper lugs and crimping and wiring toterminal point for wire of the following sizes. 16 sqmm

Supplying tinned copper lugs and crimping and wiring toterminal point for wire of the following sizes. 25 sqmm Long Barrel

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. 8SWG GIWire

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 15" Sweep (450mm)

Fixing all types and all capacities of fluorescent I false ceiling I spot light I CFL I LED fittings indoor on the wall/ ceiling I rafters I girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall/ ceiling I Rafter I Girders

Using 1 Mtr long 19mm 18 SWG enamelled brazed conduit of twonos. rod pendent with ball socket with check nuts all nickel plated

Fixing charges of post top/ Gate/ Garden fitting /LED on the existing GI/ GI or any other pipe using required size of reducer, wiring using suitable wires.

Fixing a ceiling I Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 I 0.0076 inch PVC insulated twin twisted copper wire and wiring.

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-39754 core 16 sqmm

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe I stoneware pipe I on wall/ on pole as required.In existing trench/duct. 6 sqmm to 16 sqmm

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete.(As per Civil SR KSRB 1-2, P-7)In soil (ordinary)

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)19/20mm

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.16 sqmm

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat . with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm

Fabricating supplying and mounting MS box made out . SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with ?tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 16SWG

Supplying PVC/GI flexible conduit pipe .. mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminatedcompletely 32mm

Supply and Installation / Fixing / Provision of Pole box with HRC Fuse / MCB provision and suitable connector / terminal for 3 Ph / 1 Ph connections with Loop-In & Loop-Out terminals for 10 Sqmm / 25 Sqmm 3.5 C Al/Ar / Cu/Ar Cable and branch out 2.5 Sqmm 2 core Al/Cu PVC Insulated cable, enclosed in a Thermoplastic, Polystyrene enclosure, which should be shock proof, safe, IP65(Weather Proof), rust proof, dust proof, water proof having Internally Embedded Gasket with provision for cable entry through IP65 Thermoplastic, polyamide glands and/or grommets. 200mmx200mmx98mm

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.

Fabricating, supplying and erection of …Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBsas per IS specifications suitable to withstand the wind speed of 47 m/sec for …….Mtrs pole in single section and single joint welded as per IS 9595/IS 10178AWS having dimensions bottom …..mm, top….mm with 3mm thick, suitable base plate and 4Nos of ................................................................................. long J bolts along with template and the pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended. 6meters - Top 70mm and bottom 130mm dia

Supply and fixing of 4pole power contactor with NO/NC contacts onexisting wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40 Amps

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 1 OK and complete wiring as required confirming to IEC 60898. 6-32Amps DP

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 1 OK and complete wiring as required confirming to IEC 60898. 40 Amps TPN

Earthwork excavation for foundation of buildings, culverts, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5m in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50m. after breaking of clods complete as per specifications.

Providing and laying in position plain cement concrete of mix M10 with OPC cement @ 220 kgs, with 40mm and down size graded granite metal coarses aggregates @0.892cum and fine aggregates @0.465cum machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation and plinth, including cost of all materials, labour, HOM of machinery, curing complete as per specification

Providing and laying in position plain cement concrete of mix M15 with cement @240kgs,with 20mm and down size graded granite coares aggregates @0.878cum and fine aggregats @ 0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation and plinth and cills including cost of all materials, labour, HOM of machinery, curing complete as per specification.

Fixing charges of post top/ Gate/ Garden fitting /LED on the existing GI/ GI or any other pipe using required size of reducer, wiring using suitable wires.

S NINGAPPA

S SHIVARAJU AND CO

DHARMENDRA KUMAR