Providing and fixing Rumbler, Thermoplastic and Retro reflective road studs at various locations in beat no. 219 in D ward

Supplying/ fixing of Two Way Raised Pavement Markers made of polycarbonate moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 13635 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97– DO III Dt 11.06. 1997 . The minimum reflective area of 13 Sq.Cm on each side and the slope to the base shall be 35 +/- 5 degree. Fixing will be without nails but by using epoxy resin based adhesive as per manufacturer’s recommendation including site clearance etc and complete as directed by the engineer.'

Supplying/ fixing of One Way Raised Pavement Markers made of polycarbonate moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 13635 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 – DO III Dt 11.06. 1997 . The minimum reflective area of 13 SqCm on each side and the slope to the base shall be 35 +/- 5 degree. Fixing will be without nails but by using epoxy resin based adhesive as per manufacturer’s recommendation including site clearance etc and work complete as per specifications and as directed by the Engineer

Providing and applying hot applied thermoplastic road marking material with glass beads extremely high skid resistance 2.5mm thick without primer coat (tack coat) on asphalt road surface. All labour materials with special aggregates etc, as specified in B.S. part-I & II 1989 and carrying out the marking on any road on centre line and other lane marking continuous for intermittent 10cm or 15cm width and also pedestrian crossings stripes as well as spraying further quality of glass beads of type II uniformly into a mono layer on to the hot paint line in quick succession of the paint spraying operation @ 250gms per sq.mt. area as directed and as per B.S./MORTH. specification in White /Yellow colour. work complete as per specifications and as directed by the Engineer.

Arrow marking for Route direction straight or right or left or straight & right or straight or left & lettering as per design in white or traffic yellow as specified and directed for speed limit upto 50 km/hrs. work complete as per specifications and as directed by the Engineer.

Providing and fixing Speed Breakers of Size 350 W x 500 L x 50 H mm yellow black color as shown in the drawing with necessary fittings & fixtures as directed by EIC