Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.3 LAccepted-AOC KALIBARI ROAD TINSUKIA TINSUKIA ASSAM 786171 | TINSUKIA | ASSAM | 786171 | L1 | Accepted-AOC DUE TO QUOTED RATE IS L1 | |
| 2 | L2₹15.9 L+₹1.6 L (11.1%)Rejected-Finance MILLONALLY LANE 3 POST TINSUKIA ASSAM PIN 786125 | TINSUKIA | TINSUKIA | ASSAM | 786125 | L2 | Rejected-Finance DUE TO QUOTED RATE IS HIGH |
Tender Value
₹14 L
EMD Value
₹28,000
Closing Date
13 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA, ASSAM
PROVN OF 02 SCOOTER/CYCLE PARKING SHED NEAR BLDG NO.T-20, T-26 AND B VEH SHED FOR 03 VEHICLES IN MT GARAGE NEAR BLDG NO.T-26 AT LEKHAPANI MIL STN
2022_MES_552712_5
8693/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Class E and category a (i)
4 documents required · 4 mandatory
₹500
GE LEKHAPANI
₹28,000
Yes
20 Feb 2023
18 Jan 2023
16 Feb 2023
18 Jan 2023
13 Feb 2023
25 Jan 2023
Amount
Surface excavation not exceeding 30cm deep,averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation getting out in soft/ loose soil complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm of soft loose soil.complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, in soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed withearth around, in layers not exceeding 25 cm and complete all as specified and directed.
M&L PCC (1:4:8), type D-2, (using 40mm graded stone aggregates) as in foundations, filling, mass concrete etc complete all as specified and directed.
M&L PCC (1:3:6), type C2 (using 40mm graded crushed stone aggregate) as in bed blocks etc incl necessary formwork complete all as specified and directed.
M&L M-25 (Design Mix), (using 20mm graded stone aggregate) as in foundations, raft footings, stub columns etc and similar works complete all as specified and directed.
Use and waste of formwork to sides of concrete foundation, footings, base of coloumns, raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.
M&L Brickwork with subclass ‘B’ bricks, straight for curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed.
All as per Item 12 above, but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders,complete all as specified and directed.
S&F Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 complete all as specified and directed.
S & F Mild steel work of in hollow rectangular or square tubular trusses incl special shaped washer etc complete using ERW or HRW welded conforming to IS - 4923 Complete all as seified and directed
S&F Rolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment conforming to Fe:410-W(Gde-E-250) quality-A complete all as specified and directed.
S&F Mild steel screw bolts (Machine made) exc 5 cm long but n.exc 10 cm long with hexagonal or square head at one ends and screwed the other or screwed both ends each screwed end to be fitted with washers with one hexagonal or square nut and diameter of neck 16 to 20 mm complete all as specified and directed
M&L for pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed
M&L for hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, with and including watering and well rammed to a true surface using 8 to 12 Ton power roller,complete all as specified and as directed.
Rolling and consolidating formation surfaces in cutting using 8 to 12 Ton power roller complete all as specified and as directed..
M&L PCC ( 1:3:6 ), type D-2 (using 40 mm graded stone aggregate), as in sub base of floor complete all as specified and as directed.
M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
M&L Factory made chamfered edge cement concrete paver block with grey cement and no pigments any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade.manufactured with table vibratoy method using PU mould laid in required coloured and pattern laid over sand bed complete all as specified and directed by eng-in-charge. Note:-Sand bed shall be measured and paid separately
All as per Item No 24 above but with grey cement and pigments.
M&L 75mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floors, finished even and smooth without using extra cement all as specified and as directed.
M&L 50 mm thick PCC (1:3:6) type C-2 (using 40 mm graded stone aggregates) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with hot bitumastic mix in proportion of bitumen and sand 1:2 complete as specified & directed.
M&L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces including finishing fair and even all as specified and directed.
M&L Prepration of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.
M&L Preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paintover a coat of red oxide primer complete all as specified & as directed.
M&L for surface point wiring with 2 run x 1.5sqmm, FRLSH, PVC insulated, unsheathed, multistranded single core copper conductor cable with ISI marked for working voltage 1100 volt grade, drawn in and including PVC conduit medium grade not less than 20 mm dia ISI marked with necessary fixing acessories on surface of wall/roof etc. including 1.5 sqmm , FRLSH PVC insulated multistranded copper conductor of ISI standard as earth continuity conductor and connecting to earth dolly and to be terminated in and inclusive PVC Switch box, ISI marked sjuitable for mounting switches, socket out lets, regulator etc. for one light/fan point controlled by one switch complete all as specified and directed by Eng-in-charge.
All as per Item No.31 above,but one 3 pin socket outlet 5 amp independent board complete all as specified and directed.
All as per item No 31 above,but for one 15 Amps socket outlet but using 2.5 sq mm,copper conductor with 1.5 sq mm,PVC insulated single core cable for earth continuity conductor complete all as specified and directed.
S&F Switch piano flush type, 6 amps, 230V AC,single pole, one way complete all as specified and directed.
S&F Ceiling rose surface type bakelite 65x50mm three terminal complete all as specified and directed.
S&F Switch socket combination multipurpose suitable for 2 pin and 3 pin 6 amp flush type complete all as specified and directed.
S&F Switch socket combination multipurpose suitable for 2 pin and 3 pin 16 amp flush type all as specified and directed.
S&F LED tube light fitting 4 ft. 1 x 18 watt with 230 volts, with bipin holder connector block, LED retrofit tube rod etc complete with all accessories internally pre-wired and fixed to walls/ceiling with screw on round PVC blocks including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
S&F LED bldg security light fitting 25W watt with 230 Volts with IP 66 protection, High Impact resistance complete with mounting bracket, and fixing accessories, nut/bolt/washers etc all accessories internally pre-wired and fixed to walls complete all as specified and directed.
S&F Pressed sheet metal enclosure (MCB DB), single phase and neutral with 200 Amps rated bus bar, double door type, 240 volts including grouting in wall and connecting complete for 8 way complete.
S&F MCB SPN 32 Amps, 230 volts AC and connecting using suitable size of wire all as specified and directed.
S&F MCB SP 6 to 32 Amps, 230 volts AC and connecting using suitable size of wire all as specified and directed.
Supply and spread river sand in trenches as cable cushioning 8 cm below the cables and 15cm above the cable all as specified and directed.Note: Punned thickness shall be measured for payment purpose.
Supply and lay burnt bricks sub class 'B' standard size laid across the cable in trenches as protection to the cable all as specified and directed.
Supply,laying,testing of XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with glanded aluminium conductor of cross sectional area 10 sqmm 2 core laying or passing through pipe/wall/floor/trenches complete all as specified and directed.
S&F GI pipe, 40 mm bore,(light Grade) with suitable nuts and bolts incl clamps laying in in trenches/under floors or roads or along the pole for protection of cables complete all as specified and directed.
M&L Earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways,etc and testing on completion complete all as specified and directed by Engineer-in-Charge.
M/S D R GOPE
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .