REPAIRS TO POT HOLES / RESURFACING OF APPROACH ROADS EXC 5.5M IN WIDTH UNDER AGE B/R II GE (N) AHMEDNAGAR

Amount

M&L Repairs to pot holes any depth n.exc 1 Sqm each including sweeping free from dust and mud water scoring sunken surfaces in roads, paths, etc. cutting round edges to at least 25 mm in depth and making good by filling in screened and graded road metal watering and well ramming (incl supply of metal) and making good by applying tack coat @ 5 kg per 10 Sq.m,using paving bitumen VG-10 putting in pre mix as specified for thin bituminous carpet (2 cm thick) well rammed and sealed with sand seal coat (6.8 kg of binder with 0.60 cum of sand) again well rammed (including supply of pre mix binder and sand) depth of pot holes not exc 30mm all as specified and directed.

M&L Scarifying or picking gravelled, macadam or bituminous macadam surfaces laid over concrete road in area exc 400 sqm exc 50 mm n exc 100mm deep and getting out the debris from the site .

M&L for 75mm thick ( compacted thickness) WBM with crushed stone aggregates (granite or trap or basalt) of grading 02 (63mm to 40mm size) spread rolled with 08 to 10 tonne power roller and consolidated to a required camber and gradient all as specified and directed.

Preparing unsurfaced water bound macadam surface of road by brushing with wire brushes for removing caked mud etc sweeping with broom and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a tack coat with bituminous primer at the rate of 7.5 Kg /XSqm using paving bitumen (VG-10 grade).

M&L premixed bituminous macadam with binder content 4% by weight of total mix of paving bitumen VG-30 compacted thickness 75mm or less ,laid and rolled to required camber and gradient using power roller etc all as specified. (Note: Premixed bituminous macadam shall be brought from Hot Mix Plant and spreading shall be done using mechanical paver and SDAC shall be done within 48 hours after completion of rolling and consoliation of BM).

Preparing existing black top surface of road by brushing with wire brushes for removing caked mud etc sweeping with broom and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a tack coat with bituminous primer at the rate of 2.5 Kg per /XSqm using paving bitumen (VG-10 grade).

M&L bituminous premix asphaltic semi dense concrete 30 mm thick consolidated thickness with 5% binder content by weight of total mix using paving bitumen VG-30 penetration spread using mechanical paver and rolled & compacted to required gradient and camber using power roller 8 to 12 tonne capacity.(Note: SDAC shall be brought from Hot Mix Plant and spreading shall be done using mechanical paver ).

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions (Reflector Red)

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions (Reflector Yellow)

M&L for painting lines, dashes, arrows,letters etc on roads, pavements etc n exc 10cm wide with 2mm thick reflective marking strip of colour and shape as directed using hot thermoplastic materials, using fully/semi automatic application machine fitted with shoe heater including preparation of previously treated surfaces, cleaning of all dirt, scales, grease and foriegn material etc all as specified and directed

M/S Anil Enterprises (BID ID -3106420)

M/s S. R. Constructions (BID ID -3114884)

SANJAY B SHARMA (BID ID -3097221)

M/S K.K.BINNAR (BID ID -3126782)