Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.3 LAccepted-AOC 112 21 A 2 K N MUKHERJEE ROAD P O TALPUKUR BARRACKPORE 24 PGS N | 24 PARAGANAS NORTH | WEST BENGAL | 700028 | ₹8.3 L | L1 | Accepted-AOC 1ST LOWEST |
| 2 | L2₹8.5 L+₹20,526.32 (2.49%)Rejected-Finance | ₹8.5 L+₹20,526.32 (2.49%) | L2 | Rejected-Finance 2nd Lowest |
| 3 | L3₹8.7 L+₹39,867.49 (4.83%)Rejected-Finance | ₹8.7 L+₹39,867.49 (4.83%) | L3 | Rejected-Finance 3rd Lowest |
| Sl No | Description | Qty | Unit | MIK ENTERPRISES L1 | NGM INTERNATIONAL L3 | PASS TREAT L2 |
|---|---|---|---|---|---|---|
| 1.00 | SUPPLY, DELIVERY, INSTALLATION, TESTING, AND
COMMISSIONING OF 324 M3 / HR CAPACITY AT 16 M HEAD,
1480 RPM, SINGLE STAGE HORIZONTAL CENTRIFUGAL PUMP
FOR HANDLING PRIMARY SLUDGE, AT WTP-III, GARDEN REACH WATER WORKS. | 1 | NUMBER | 6,52,860 ₹6,52,860 Lowest | 6,85,895 ₹6,85,895 | 6,65,918 ₹6,65,918 |
| 2.00 | Sypply of E.R.W.M.S. (Electrical Resistant Welded M.S.) black pipe of ISI mark as per relevent IS Specification ( heavy quality ) having wall thick-ness not less than 8 mm. [N.B.: The rates for supply of TATA Make pipe will be arrived at by adding 20% of the corresponding rates] Diameter in mm (Internal) 300 | 4.5 | METER | 3,608 ₹16,236 Lowest | 3,790 ₹17,055 | 3,680 ₹16,560 |
| 3.00 | Sypply of E.R.W.M.S. (Electrical Resistant Welded
M.S.) black pipe of ISI Mark as per relevent IS Specification (heavy quality ) having wall thickness not less than 5 mm. [N.B.: The rates forsupply of TATA Make pipe will be arrived at by adding 20% of the corresponding rates ] Diameter in mm (Internal)100 | 1.2 | METER | 1,034 ₹1,240.8 Lowest | 1,085 ₹1,302 | 1,054 ₹1,264.8 |
| 4.00 | Supply of M.S. Flange (slipper type) as per IS-6392 TABLE 17
Thickness 12mm NB Diameter in mm 300 | 2 | EACH | 2,196 ₹4,392 Lowest | 2,220 ₹4,440 | 2,239 ₹4,478 |
| 5.00 | LAYING & JOINTING PIPES, SPECIALS ETC- Flange joint
to C.l./D.l/MS. pipes and specials including supply of rubber gasket. nuts. bolts. washers etc. of best quality to make the joint watertight at required hydraulic pressure all complete as per specification & direction of the Engineer-in-Charge. Diameter in mm 300mm dia. | 2 | EACH | 1,228 ₹2,456 Lowest | 1,244 ₹2,488 | 1,252 ₹2,504 |
| 6.00 | Supply of M.S. Flange (slipper type) as per IS-6392 TABLE 17
Thickness 12mm NB Diameter in mm 150 | 2 | EACH | 604 ₹1,208 Lowest | 635 ₹1,270 | 616 ₹1,232 |
| 7.00 | LAYING & JOINTING PIPES, SPECIALS ETC- Flange joint
to C.l./D.l/MS. pipes and specials including supply of rubber gasket. nuts. bolts. washers etc. of best quality to make the joint watertight at required hydraulic pressure all complete as per specification & direction of the Engineer-in-Charge. Diameter in mm 150mm dia | 2 | EACH | 860 ₹1,720 Lowest | 903 ₹1,806 | 877 ₹1,754 |
| 8.00 | Supplying including cost of installation of C.I. Mechanical joint Reducer/Enlarger as dimensionally described in IS:13382/2004. Each Reducer consists of One C.I. Body, Two C.I. Follower Glands of different diameter, Two sealing Rubber Gaskets (Conforming to IS:5382/1985 Type-4) and Zinc coated M.S. Fasteners of adequate numbers. The whole assembly is mechanically and hydraulically tested to provisions as laid down in IS: 13382/2004. Diameter in mm 200 x 150 | 1 | EACH | 6,085 ₹6,085 Lowest | 6,143 ₹6,143 | 6,206 ₹6,206 |
| 9.00 | Supplying including cost of installation of C.I. Mechanical joint Reducer/Enlarger as dimensionally described in IS:13382/2004. Each Reducer consists of One C.I. Body, Two C.I. Follower Glands of different diameter, Two sealing Rubber Gaskets (Conforming to IS:5382/1985 Type-4) and Zinc coated M.S. Fasteners of adequate numbers. The whole assembly is mechanically and hydraulically tested to provisions as laid down in IS: 13382/2004. Diameter in mm 400 x 250 | 1 | EACH | 23,807 ₹23,807 Lowest | 25,011 ₹25,011 | 24,283 ₹24,283 |
| 10.00 | CAST IRON DOUBLE FLANGED SINGLE DOOR SWING NON RETURN VALVE HAVING SIZE- 300 MM & PN 1.6 RATINGS,
GENERALLY CONFORMING TO IS:5312 PART I, HAVING BODY, DOOR, COVER IN GRADED CAST IRON TO IS: 210 GR.FG200, BODY AND DOOR RINGS & BEARING BLOCK OF LEADED TIN BRONZE TO IS:318 GR.LTB 2 (350 MM & ABOVE), HINGE PIN OF ST.ST.AISI410, VALVE SUITABLE FOR A MAXIMUM WORKING PRESSURE OF 10/16 KG/CM2 (SEAT TEST) & BODY TESTED TO 15/24 KG/SQCM. | 1 | EACH | 64,818 ₹64,818 Lowest | 65,452 ₹65,452 | 66,114 ₹66,114 |
Tender Value
Refer Docs
EMD Value
₹16,700
Closing Date
26 Jul 2025, 2:00 pmClosed
THE DIRECTOR GENERAL (WATER SUPPLY)
KOLKATA MUNICIPAL CORPORATION 5, S. N. BANERJEE ROAD, KOLKATA-700013
SUPPLY, DELIVERY, INSTALLATION, TESTING AND COMMSSIONING OF 324 M3/HR CAPACITY, 16 M HEAD SINGLE STAGE HORIZONTAL CENTRIFUGAL SLUDGE PUMP WITH ALLIED WORKS FOR PUMP UNIT NO. 1 AT WTP-III, GRWW.
2025_KMC_877803_1
KMC/EE/WS/GRWW/25-26/PH-II/20
Open Tender
MECHANICAL
Item Rate
21 days
WTP-III, GRWW.
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹16,700
28 Jul 2026
12 Jul 2025
28 Jul 2025
12 Jul 2025
26 Jul 2025
12 Jul 2025
Amount
SUPPLY, DELIVERY, INSTALLATION, TESTING, AND COMMISSIONING OF 324 M3 / HR CAPACITY AT 16 M HEAD, 1480 RPM, SINGLE STAGE HORIZONTAL CENTRIFUGAL PUMP FOR HANDLING PRIMARY SLUDGE, AT WTP-III, GARDEN REACH WATER WORKS.
Sypply of E.R.W.M.S. (Electrical Resistant Welded M.S.) black pipe of ISI mark as per relevent IS Specification ( heavy quality ) having wall thick-ness not less than 8 mm. [N.B.: The rates for supply of TATA Make pipe will be arrived at by adding 20% of the corresponding rates] Diameter in mm (Internal) 300
Sypply of E.R.W.M.S. (Electrical Resistant Welded M.S.) black pipe of ISI Mark as per relevent IS Specification (heavy quality ) having wall thickness not less than 5 mm. [N.B.: The rates forsupply of TATA Make pipe will be arrived at by adding 20% of the corresponding rates ] Diameter in mm (Internal)100
Supply of M.S. Flange (slipper type) as per IS-6392 TABLE 17 Thickness 12mm NB Diameter in mm 300
LAYING & JOINTING PIPES, SPECIALS ETC- Flange joint to C.l./D.l/MS. pipes and specials including supply of rubber gasket. nuts. bolts. washers etc. of best quality to make the joint watertight at required hydraulic pressure all complete as per specification & direction of the Engineer-in-Charge. Diameter in mm 300mm dia.
Supply of M.S. Flange (slipper type) as per IS-6392 TABLE 17 Thickness 12mm NB Diameter in mm 150
LAYING & JOINTING PIPES, SPECIALS ETC- Flange joint to C.l./D.l/MS. pipes and specials including supply of rubber gasket. nuts. bolts. washers etc. of best quality to make the joint watertight at required hydraulic pressure all complete as per specification & direction of the Engineer-in-Charge. Diameter in mm 150mm dia
Supplying including cost of installation of C.I. Mechanical joint Reducer/Enlarger as dimensionally described in IS:13382/2004. Each Reducer consists of One C.I. Body, Two C.I. Follower Glands of different diameter, Two sealing Rubber Gaskets (Conforming to IS:5382/1985 Type-4) and Zinc coated M.S. Fasteners of adequate numbers. The whole assembly is mechanically and hydraulically tested to provisions as laid down in IS: 13382/2004. Diameter in mm 200 x 150
Supplying including cost of installation of C.I. Mechanical joint Reducer/Enlarger as dimensionally described in IS:13382/2004. Each Reducer consists of One C.I. Body, Two C.I. Follower Glands of different diameter, Two sealing Rubber Gaskets (Conforming to IS:5382/1985 Type-4) and Zinc coated M.S. Fasteners of adequate numbers. The whole assembly is mechanically and hydraulically tested to provisions as laid down in IS: 13382/2004. Diameter in mm 400 x 250
CAST IRON DOUBLE FLANGED SINGLE DOOR SWING NON RETURN VALVE HAVING SIZE- 300 MM & PN 1.6 RATINGS, GENERALLY CONFORMING TO IS:5312 PART I, HAVING BODY, DOOR, COVER IN GRADED CAST IRON TO IS: 210 GR.FG200, BODY AND DOOR RINGS & BEARING BLOCK OF LEADED TIN BRONZE TO IS:318 GR.LTB 2 (350 MM & ABOVE), HINGE PIN OF ST.ST.AISI410, VALVE SUITABLE FOR A MAXIMUM WORKING PRESSURE OF 10/16 KG/CM2 (SEAT TEST) & BODY TESTED TO 15/24 KG/SQCM.
Supplying including cost of installation of C.I. Mechanical joint Reducer/Enlarger as dimensionally described in IS:13382/2004. Each Reducer consists of One C.I. Body, Two C.I. Follower Glands of different diameter, Two sealing Rubber Gaskets (Conforming to IS:5382/1985 Type-4) and Zinc coated M.S. Fasteners of adequate numbers. The whole assembly is mechanically and hydraulically tested to provisions as laid down in IS: 13382/2004. Diameter in mm 300 x 150
SUPPLYING OF MATERIALS M.S. blank Flange as per IS-6392 TABLE 20 for 50 mm to size & for 200mm & above as IS -6329 Table-14)thickness 20mm-22mm NB Diameter in mm 100
Cutting to requisite length or shape departmental R.S. joists,channels, angles, tees, plates etc.
Welding in M.S. structural work with gas or electric: (a) Tack weld
Welding in M.S. structural work with gas or electric: (b) Continuous weld.
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface :With super gloss (hi-gloss) -(iv) Two coats (with any shade except white)
PASS TREAT (BID ID -6760310)
NGM INTERNATIONAL (BID ID -6752842)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .