Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 Bid | |
| 2 | L2₹15.0 L+₹1.2 L (8.80%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹15.1 L+₹1.3 L (9.34%)Rejected-Finance TUPKHANA PART 1 PO ARUNACHAL PS SILCHAR DIST CACHAR ASSAM 788025 | CACHAR | ASSAM | 788025 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹15.1 L+₹1.3 L (9.71%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹14 L
EMD Value
₹28,000
Closing Date
10 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
GE SILCHAR, PO-ARUNACHAL, DIST-CACHAR, ASSAM-788025
REPAIRS TO SUMMER AND COOLING APPLIANCES AND GARDEN STREET SECURITY SEARCH LIGHTS AND CONNECTED WORKS AT VAIRENGTE AND LAILAPUR UNDER GE SILCHAR
2023_MES_580318_1
8772/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
VAIRENGTE
Please refer Tender documents
7 documents required · 7 mandatory
₹500
GE Silchar
₹28,000
6 Apr 2023
10 Feb 2023
17 Mar 2023
10 Feb 2023
10 Mar 2023
25 Feb 2023
17 Feb 2023 - 21 Feb 2023
Amount
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations, manholes, etc. or for laying cables/pipes, erecting poles, etc. not exceeding 10sqm on plan and getting out in soft / loose soil complete all as specified and as directed
Returning, filling in, including, spreading, leveling, watering and well ramming in layers not exceeding 25cm deep as in any type of soil complete all as specified and as directed
Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point in any type of soil including spreading in low lying area and leveling complete all as specified and as directed
M&L for fine dry river sand cushioning by laying 8cm thick layer below the cable for making soft bed and 15cm above the cable and then punning down to its consolidated thickness of 18cm after the cable is laid all as specified in SSR Part-I complete all as specified and as directed Note: Only punned thickness of sand shall be considered for measurement purposes
Supply and laying burnt bricks of sub-class 'B' designation 75 laid in trenches for cable protection complete all as specified and as directed
M&L for dismantling and taking down old unserviceable junction boxes of any type /size from any location / position and disposing off including all necessary carting, etc. complete all as specified and as directed
S&F thermoplastic cable junction boxes IP-65 protection class, of size 210x155x92mm, with metric knockout for cable entry, weather proof suitable for outdoor installation, including glands and with 4 terminal for terminating one incoming and outgoing UG cable of size 10/16sqmm 2/4 core fixed to electric poles any type by means of suitable MS clamps, nuts and bolts with 01No. MCB SP 20A 10kA (rate shall be included) inside the box complete all as specified and as directed
Supplying, laying / fixing, testing and commissioning of electric cable, 1100V grade aluminium conductor XLPE insulated, armoured cables conforming to IS-7098 (Part-I)-1988, stranded, PVC bedded laid in trenches, passing through ducts, etc. fixed on poles, etc. including taking out old damaged cable and disposing off complete all as specified and as directed of the following sizes: Note: Excavation/earthwork, bricks, sand cushioning and GI pipe will be measured and paid separately under respective items herein
3.5 core 25sqmm
4 core 16sqmm
4 core 10sqmm
2 core 10sqmm
2 core 6sqmm
2 core 4sqmm
M&L for taking down carefully post top lanterns of any capacity / any make after disconnecting electric connections and carrying out repairs by replacing worn out / burnt / damaged parts / components and refixing the same after carrying out necessary repairs to original place and re-connecting up complete all as specified and as directed Note: Replaced major parts / components will be measured under respective items hereunder and minor spares viz. glands, nuts, bolts, etc. shall be deemed to be included in quoted rate
M&L for taking down carefully flood light / street light of any capacity / any make after disconnecting electric connections and carrying out repairs by replacing worn out / burnt / damaged parts / components and refixing the same after carrying out necessary repairs to original place and re-connecting up complete all as specified and as directed Note: Replaced major parts / components will be measured under respective items hereunder and minor spares viz. glands, nuts, bolts, etc. shall be deemed to be included in quoted rate
S&F LED street light, 72W new generation energy saving, environmental friendly, long life, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP-66 protection and impact resistance of IK07 with 10kV built-in surge protection device with 72W LED lamp including taking down old / unserviceable fitting and disposing off complete all as specified and as directed
S&F LED street light, 70W new generation energy saving, environmental friendly, long life, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP-66 protection and impact resistance of IK07 with 10kV built-in surge protection device with 70W LED lamp including taking down old / unserviceable fitting and disposing off complete all as specified and as directed
S&F 150W LED flood light fitting, pressure die cast aluminium housing with heat resistant toughened glass, IP-66 protection luminaries with 150W LED lamp including taking down old / unserviceable fitting and disposing off complete all as specified and as directed
S&F 200W LED flood light fitting, pressure die cast aluminium housing with heat resistant toughened glass, IP-66 protection luminaries with 200W LED lamp including taking down old / unserviceable fitting and disposing off complete all as specified and as directed
S&F LED 100W flood light, energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP-66, suitable for highlighting architectural facade and general purpose lighting with 100W LED lamp including taking down old / unserviceable fitting and disposing off complete all as specified and as directed
S&F LED 120W flood light, energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP-66, suitable for highlighting architectural facade and general purpose lighting with 120W LED lamp including taking down old / unserviceable fitting and disposing off complete all as specified and as directed
S&F LED 300W flood light, energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP-66, suitable for highlighting architectural facade and general purpose lighting with 300W LED lamp including taking down old / unserviceable fitting and disposing off complete all as specified and as directed
S&F 25W post-top lantern, opal light fitting, IP-65, new generation, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source including taking down old / unserviceable fitting and disposing off complete all as specified and as directed
S&F 20W LED heritage pattern post top, ideal to light up parks, garden ways and heritage sites, IP-65 with rated LED 20W including taking down old / unserviceable fitting and disposing off complete all as specified and as directed
S&F neo LED street light 90W for garden ways and other City beautification applications with decorative steel bracket astehtically designed as per manufacturer including taking down old / unserviceable fitting and disposing off complete all as specified and as directed
S&F LED 10W light, pressure die cast powder coated housing with PC diffuser and efficient high output LED with IP-66 protection including taking down old / unserviceable fitting and disposing off complete all as specified and as directed
S&F radiant LED step light 7W for outdoor application with IP-65 protection including taking down old / unserviceable light and disposing off complete all as specified and as directed
S&F moon (opal) 9W decorative gate light made up of high grade unbreakable polycarbonate material suitable for 9W LED bulb including taking down old / unserviceable fitting and disposing off complete all as specified and as directed
S&F LED 60W street light, new generation energy saving, environmental friendly, long life, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP-66 protection, impact resistance of IK07 with 1kV built-in surge protection device including taking down old / unserviceable fitting and disposing off complete all as specified and as directed
M&L for plain cement concrete 1:3:6 (type C-2) using 40mm graded stone aggregate as in foundations, for fixing poles, etc. complete all as specified and as directed
M&L in repairs for cross arms, bracings, supports clamps, and back plates fabricated from structural steel section including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated and inclusive of one primer coat, one under coat and one finishing coat of good quality of aluminium paint all as specified and as directed
S&F in repairs security light bracket with 40mm bore GI tubing, light grade, cut and bent to shape required, 1.5m long fixed with including bends, flat iron clamp made of FI 40x6mm, nuts, bolts, washers, etc. duly painted with two coats of aluminium paint over a coat of red oxide zinc chrome primer complete all as specfied and as directed
Supplying, fixing steel water tubing, 40mm bore, light grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or floors for mounting of post top lanterns, cut to required length of 1.5m long (each) duly grouted in ground complete all as specified and as directed
M&L for taking down AC 1.5/2TR capacity for required servicing, cleaning of cooling coil, air filters/plasma filters, condenser, compressors, fan motor, etc. with vacuum cleaner and cleaning solutions, etc., checking serviceability of electrical / electronic parts viz. circuit relays, wiring kit, thermostat switches, knobs, remote control unit, fan, blower, etc. and ensuring the AC unit in satisfactory working conditions complete all as specified and as directed for the following type of AC units: Notes: (a) Spares / parts / components replaced will be measured and paid separately under relevant items hereinafter and labour charges for replacement including all allied works shall be deemed to be included in the unit rate quoted (b) Gas charging as required shall be deemed to be included in the quoted rate (c) Cost of taking down, loading / unloading, carting (to & fro) to workshop if required shall be deemed to be included in the quoted rate
Window type AC units
Spli type AC units
S&F in repairs the following spare parts including necessary fittings as per sample and suitable for air conditioner 1.5/2T, split / window type units complete all as specified
Thermostat switch with regulating knob
Starting capacitor 80/100Mfd
Blower motor 8Mfd capacitor
Running capacitor 36Mfd
Running capacitor 50Mfd
Relay box / open type
Overload protector relay
Strainer / drier
Front grill suitable as per existing pattern including fixing screw
Air filter
Remote control PCB
Capillary charging
MS stand for split AC
Supply, installing, testing and commissioning of compressors of AC units, in any location / position including disconnecting electrical mains, remove the refrigerant and capture it in a storage cylinder, cutting line sets, removing the condenser coil and everything around the compressor, taking out the condenser unit, cleaning and removing dust / dirt, etc., necessary minor modifying (replacement of capilary tubes, etc.), replacing the compressor and finally put the rest back together and balance charging of refrigerant gas F-22/R-134A (if required) including disposing of old unserviceable condensor unit complete all as specified and as directed of the following capacities: Notes: (i) Compressor units shall be from existing manufacturer / as approved by the GE (ii) Compressors shall be brought in sealed conditions (iii) Compressor shall bear a minimum guarantee of 5years and as given by manufacturers
S&F in repairs condensing coil assembly of air conditioner of any make, including necessary fittings viz. clamps, nuts, bolts, etc. and all required soldering, brazing, etc. complete all as specified and as directed
S&F in repairs blower motor assembly of air conditioner of any make, as per existing including necessary fittings viz. clamps, nuts, bolts, etc. complete all as specified and as directed
M&L for charging refrigerant gas F-22/R-134A in split type AC unit of capacity 1.52Ton including required staging / taking down of compressor units, etc. as required, detecting leakages, etc. stopping leakages by welding and testing on commissioning in satisfactory working conditions complete all as specified and as directed
M&L for disconnecting from mains, for servicing refrigerators including cleaning the cooling coil, air filters, condenser, compressors, fan motor, etc. with vacuum cleaner and cleaning solution, checking serviceability of electrical/electronic circuits relays, wiring kit, thermostat switches, knobs, leakage of gas, etc. and making the deep freezer / refrigerator to satisfactory working conditions complete all as specified and as directed of the following capacities: Notes: (a) Spares / parts / components replaced will be measured and paid separately under relevant items hereinafter and labour charges for replacement including all allied works shall be deemed to be included in the unit rate quoted (b) Gas charging as required shall be deemed to be included in the quoted rate (c) Cost of lifting, loading / unloading, carting (to & fro) to workshop if required shall be deemed to be included in the quoted rate
310litres
230/285/286litres
165/175/185litres
Supply only the following spare parts as per sample and suitable for refrigerators including necessary fittings complete all as specified and as directed
Strainer or drier round type
Relay box type 1/6HP
Switch for cabinet bulb
Lamp screw type
Door lock with duplicate keys
Relay open type (over load cum relay)
Overload protector
Cooling coil door with locking spring
Thermostat switch with regulating knob
Ice tray
Fan motor / evaporator
Fan blade
Chiller tray as per existing model
Frost free timer
Frost free cooling coil
Capillary charging
Thermal fuse
S&F company made new sealed compressor units for refrigerators, including disconnecting electric and water connections in any position / location, cleaning and removing dust / dirt, etc., necessary minor modifying (replacement of capilary tubes, etc.), replacing the compressor and finally putting the rest back together and balance charging of refrigerant gas (if required) including disposing off old unserviceable compressor unit complete all as specified and as directed of the following capacities: Notes: (i) Compressor units shall be from existing manufacturer / as approved by the GE (ii) Compressors shall be brought in sealed conditions (iii) Compressor shall bear a minimum guarantee of 5years and as given by manufacturers
165 to 230litres
285 to 310litres
M&L for charging refrigerant gas F-22/R-134A in refrigerator units of any capacity and testing on commissioning in satisfactory working conditions complete all as specified and as directed
M&L for disconnecting from mains and taking down for servicing water coolers including cleaning the cooling coil, air filters, condenser, compressors, fan motor, etc. with vacuum cleaner and cleaning solution, checking serviceability of electrical/electronic circuits relays, wiring kit, thermostat switches knobs, fan and blower, etc. and making the water cooler to satisfactory working conditions complete all as specified and as directed of the following capacities: Notes: (a) Spares / parts / components replaced will be measured and paid separately under relevant items hereinafter and labour charges for replacement including all allied works shall be deemed to be included in the unit rate quoted (b) Gas charging as required shall be deemed to be included in the quoted rate (c) Cost of lifting, loading / unloading, carting (to & fro) to workshop if required shall be deemed to be included in the quoted rate
150litres
60/120litres
40/80litres
S&F company made new sealed compressor units for water coolers of capacity 60/120litres, including disconnecting electric and water connections in any position / location, cleaning and removing dust / dirt, etc., necessary minor modifying (replacement of capilary tubes, etc.), replacing the compressor and finally putting the rest back together and balance charging of refrigerant gas (if required) including disposing off old unserviceable compressor unit complete all as specified and as directed Notes: (i) Compressor units shall be from existing manufacturer / as approved by the GE (ii) Compressors shall be brought in sealed conditions (iii) Compressor shall bear a minimum guarantee of 5years and as given by manufacturers
M&L for charging refrigerant gas F-22/R-134A in water cooler units of any capacity and testing on commissioning in satisfactory working conditions complete all as specified and as directed
S&F in repairs blower motor assembly of water coolers of any make, as per existing including necessary fittings viz. clamps, nuts, bolts, etc. complete all as specified and as directed
S&F in repairs condensing coil assembly of water coolers of any make, including necessary fittings viz. clamps, nuts, bolts, etc. and all required soldering, brazing, etc. complete all as specified and as directed
Supply only the following spare parts as per sample and suitable for water coolers including necessary fittings complete all as specified and as directed
Starting capacitor 60-80Mfd
Running capacitor 25Mfd
Relay box type 1022
Thermostatic switch with regulating knob
Push cock, self closing chromium plated 15mm bore including nut and washer, etc.
PVC drain pipe 1m long including clamps
Float valve of glass or gun metel, 15mm bore with ball
Over load protector relay
Running capacitor 36Mfd
Capillary charging
Pencil strainer
M&L for earthing using GI earthing strip with galvanised steel earth plate electode 600x600x6mm thick buried directly in ground, earth pit not less than 2.25m deep below ground level connection to and including GI strip of size 25x4mm extended to 7.5m as earth lead by means of GI bolts, nuts, etc. with provision of charcoal and salt all as per electrical plate No. 3 of SSR Part-I including water arrangement with GI pipe 20mm dia (medium grade), earth lead protection pipe 50mm medium grade with bends, elbow, etc. from earth plate to test point, excavation and earthwork in any type of soil, returning, filling, ramming and removing of soil to distance not exceeding 50m, make good to match with existing surface making PCC pit (earth chamber) having internal size 300x300x300mm and outer size 600x 600x 600mm with RCC reinforced cover 50mm thick and testing on completion including making test points on wall as per SSR specifications and taking down old earthing complete all as specified and as directed
Notes for serial item No. 105: (i) The cost of GI earth continuity wire / strip with GI pipe 20mm medium grade upto 7.5m is deemed to be included (ii) The earth chamber to be constructed 0.5m from edge of earth pit with necessary watering arrangement. The cost for the same is deemed to be included in above item (iii) Earthing shall produce desired earth resistance values as directed by the Engineer-in-charge
MS AFTAB LASKAR
M/S R A ENTERPRISE
M/S M P Sharma
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .