NIT No GE/ND-21/2025-26

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) complete all as specified and directed.

Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non skid joint less coloured ceramic tiles 7-8mm thick (Square / Rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for vitrified ceramic light shade tiles 10 mm thick (square /rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors set and jointed in neat cement slurry and pointed with white or coloured cement laid over 15 mm thick Screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed.

All as per item No 5.00 above but in skirting only over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Glazed vitrified coloured tiles of 10 mm thick in glossy finish of size 2 x 4 feet (600 x 1200 mm) in vertical surface with 10 mm thick backing layer of good quality tile adhesive (MYK Laticrete 325+ / Roff) (qty of water should be mix as per manufacturere's instruction) fix to wall incl cleaning work (Colour and pattern of tile as approved by EIC and work to be execute through skilled labour) complete all as specified and directed.

Renewing tiles in patches, area n exc. 5.00 sq. m including removing, cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles of glazed /non skid ceramic tiles white /coloured as per the existing tiles and size as suitable/matching with the existing tiles in dados/ floors/ wall including necessary cement work/white cement painting complete all as specified and directed.

M&L for petty repairs to plaster, floor, plinth etc and like by PCC 1:2:4 Type B-0 and plaster 15 mm thickness using ready mix plaster ( Ultratech/ READIPLAST RP) including bonding coat as per manufacturers instruction as in ceilings/walls etc incl preparing roughening and cleaning the surface and taking down old plaster, finishing even and smooth without using extra cement in patches area n exc. 0.50 Sqm each patch and removal of rubbish off the premises complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Granite (of any type) 20mm thick machine cut, bedded with 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, moulding and polishing complete all as specified and directed.

M&L for 20 mm thick granite (of any type) machine cut as in vertical surfaces and like, jointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone incl grinding, moulding and polishing laid over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick bedded with 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 22-25 mm thick Red Agra sand stone as in wall cladding, steps, footpath gang saw machine cut edges, polished, over 20mm thick cement screed in CM 1:4,set and jointed in cement mortar 1:3 and pointed in cement mixed with approved pigment to match the colour of the stone (Note: Size and colour of stone to be matched with existing stone) complete all as specified and directed.

M&L for Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sq m area and not exceeding 0.5 sq m fixed with and including one number SS clamps (grade-202) of flat-30mm X 2mm , making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing &including silicon treatment complete all as specified and directed.

M&L for 18 - 20 mm thick italian marble (approved colour & Pattern & Size) machine cut fixed on floor with 10 mm thick backing layer of premium quality adhesive paste (Hardner + Resin) for italian marble (MYK Laticrete / Roff / Tenax etc) with help of 10mm depth groove trowl over incl 20 mm thick screed bed of cement mortar 1:6 and joint filling with epoxy including with admixture of pigment to match with shade of italian marble stone including cutting, polishing and cleaning work complete complete all as specified and directed. Note:- (i) 50 mm thick foam sheet to be used for cutting of marble (ii) Vibrator and 10 mm depth groove trowl and other required tools to be used (iii) work to be execute through highly skilled labour (iv) Marble Adhesive will be approved by Engr-in-Charge before use

Cutting chases, pinning in stone concrete block or slab walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring or any purpose required at site etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge such as steps, cooking platforms and other similar situations complete all as specified and directed.

Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas, parapets, railing and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24hours of application of rust remover with the help of wire brush, sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement with existing reinforcement as directed wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of sika latex or equivalent in Forsoc/BASF/Dr Sunanda with 4 part of water and 6 part of cement by weight, coverage of sika latex shall not be more than 0.25 Kg/Sqm for one coat. Adhesive bond strength not less that 2.5 mpa, After this, providing 40mm (average thickness) guiniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary potland cement 43 grade and 2 part of Ghagger sand mixed with adhesive /admixture at the rate as per manufacturer instruction and as directed) including stripping floting with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guiniting to be finished fair with 10mm thick plaster in cement 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc as directed at site complete all as specified and directed. Note: Welded mesh & addl reinforcement if required measured and paid separetly. Note :- Only steel scaffolding is allowed and rates to be deemed included in quoted rates. The work shall be carried out by enclosing affected area by green cloth) up to G+3 storey building.

S&F PVC chhaja (Factory made) exc 0.2 sqm and not exc 0.6 sqm and fasterner 150mm long with complete set as per sample including demolition of old RCC chhaja complete all as specified and directed by Engr-in-charge and approval by GE.

Demolition cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for in ground floors and upto 4 storey complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in lintels upto 1.5m clear span, cills , copings and like incl. weathering , slightly rounded or chamfered angles and throating including formwork (straight or curved) complete all as specified and directed.

Demolition cement concrete (reinforced) in ground floors and upto 4 storey of any description and in any position incl MS pipes Scafolding and making arrangemenets with hessian clothes for protection from falling of concrete & all othersaftey precautions complete all as specified and directed.

M&L for reinforced cement concrete M-25 (Design Mix) using 20 mm graded aggregate as in slab supported on walls, beams and columns in floors, roofs, landings,balconies, canopies, deck slab and in shelves and the like complete all as specified and directed.

Form work to soffits of suspended slabs as roof slabs, floor slabs, landings and similar work n.exc 200mm thick for rough finished surfaces complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 26.00 above but 6 to 8 mm dia complete all as specified and directed.

M&L uprooting of plants (girth n.exc 15 cm of trunk to any height of plants) grown along the pipes or walls, chajjas, parapets and roof of bldgs and making good the surfaces as per existing surfaces and pouring acid not less than 100 ml for each plant in the root to avoid further growth as directed. Any other grass plants etc below 45 cm height shall be deemed to be removed from the premises complete all as specified and directed. Note: Work has to be executed up to (G + 3 storey) bldg

M&L for complete removal of existing treatment from wall surfaces using vacuum based sanding machine, removal of nails etc & filling cracks/ holes by applying wall care putty (multi purpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of oil emulsion distemper using machanical means over a coat of alkali resistant primer over a coat of wall care putty 1.00mm thick (JK/Birla) to bring the surfaces even and smooth complete all as specified and directed.

M&L for complete removal of existing treatment from ceiling surfaces using vacuum based sanding machine and applying two coats of oil bound distemper using machanical means over a coat of alkali resistant primer over a coat of wall care putty (JK/Birla) to bring the surfaces even and smooth complete all as specified and directed.

M&L for complete removal of existing treatment surfaces from plastered or, concrete asbestos cement or stone surfaces of any description using vacuum based sanding machine and applying two coas of weather proof, ASIAN - APEX or BERGER - WEATHER SHIELD (with anti fungus and anti algae properties) over a coat of solvent based primer complete all as specified and directed.

M&L for one coat of weather proof, ASIAN - APEX or BERGER - WEATHER SHIELD (with anti fungus and anti algae properties) using vacuum based sanding machine including preparation of exiting painted surface and repairing where required with putty complete all as specified and directed.

M&L for applying one coat of oil bound distemper on wall including preparation of old surfaces by vacuum based sanding machine all as specified, removal of nails etc & filling cracks/ holes by applying wall care putty (multi purpose mixer shall be used for uniform and proper mixing of putty) complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on wooden surfaces of any description over 10 cm width or gith including preparation of old painted wooden surfaces complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on steel surfaces of any description over 10 cm width or gith including preparation of old painted steel surfaces complete all as specified and directed.

Taking down cement or cement lime plaster any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for renderning 15mm thick on brick or concrete surfaces of walls (External surfaces upto 4 storey buildings) in CM 1:4 finished even & smooth without using extra cement complete all as specified and directed. Note: Rates must be quoted keeping in view scaffolding requirement upto height for 4 storey buildings.

M&L for renderning 15mm thick on brick or concrete surfaces (Internal surfaces) other than fair faces, in CM 1:6 finished even & smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick polymer modified plaster in CM (1:3) on fair face of brick or concrete surfaces on ceiling finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement complete all as specified and directed. Note: SBR latex shall be measured and paid separately

Supply only Styrene Butadiene Rubber latex emulsion complete all as specified and directed.

S&F GI wire netting 0.9mm dia and 12 mm mesh lathing to wood or metal studding, joist etc in walls, ceiling stanchions, beams etc incl all laps cutting and waste complete all as specified and directed .

M&L for preparation of new plastered surfaces of wall or concrete surfaces of any description and applying two coas of weather proof, ASIAN - APEX or BERGER - WEATHER SHIELD (with anti fungus and anti algae properties) over a coat of solvent based primer complete all as specified and directed. Note: Rates must be quoted keeping in view scaffolding requirement upto height for 6 storey buildings.

M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of wall care putty 1.00mm tk (JK/Birla) to bring the surfaces even and smooth including preparation of new plastered surfaces of wall complete all as specified and directed.

M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat on ceiling care putty 1.00mm thick (JK/Birla) to bring the surfaces even and smooth including preparation of new plastered surfaces of ceiling complete all as specified and directed.

S&F in repairs corner glass shelf of size 300x300 mm made of transparent toughened glass 5 mm thick and chromium plated double railing on front side and chromium plated knobs on botn sides fixed in position complete all as specified and directed.

S&F in repairs for Glass self assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromoium plated bracket guard and railing 60 cm long complete all as specified and directed.

Taking down Aluminium shutters of any description exc 1 sqm but not exceeding 2 sqm each and refixing the same in the same opening after tightening and replacing of unserviceable screws,cleat , rubber packing, aluminium beading, butt hinges etc complete all as specified and directed. Note: Rubber beading, snap beading etc measured and paid separately

Taking down aluminium shutters of any description n.exc 1 sqm each and refixing in the same opening after tightening and replacing of unserviceable screws, rubber beading, aluminium beading, etc complete all as specified and directed. Note: Rubber beading, snap beading etc measured and paid separately

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply only anodized aluminium snap beading suitable for door shutters complete all as specified and directed.

Supply only anodized aluminium snap beading suitable for window shutters complete all as specified and directed.

Supply only rubber packing suitable for glazing of aluminium door and window shutters.

M&L for running welding in repairs exc 2.5 cm length but n.exc 5 cm (thickness of metal to be welded n.exc 6 mm) complete all as specified and directed.

Taking down old wall/ceiling of any description including frame work in any condition complete all as specified and directed.

M&L for 12 mm thick Gypsum board false ceiling fixed with counter sunk screws on and including GI frame work comprising GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sorrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.90mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at apprx 900 mm centre to centre with GI cleat and steel expansion fastener with and including ceiling section (n exc 1.20 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across intermedate at 457mm centre to centre at desired heights below roof slab, including two coats of plastic emulsion paint (approved colour) over a coat of primer on exposed surfaces of ceiling boards complete all as specified and directed.

S&F in repair mineral fibre ceiling boards 16mm thick 600 x 600 mm size including grid 25x25x1.6mm thick GI powder coated angles 25 x35x1.6mm size ‘T’ section fixed with suspenders from ceiling etc (Armstrong RH Dune 99, Aerolite) complete all as specified and directed.

Providing and fixing PVC SHEET WALL PANELLING of thickness 5mm (±0.25 ) consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm (±0.25 ) thick Prelam PVC sheet. The panel & strips shall be Density of 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company. The strips should have in their center a groveof 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm ( ±0.25 ) thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specified and directed.

Taking down chowkhats with shutter (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats with shutter (without taking off shutters from the frame) exc 1.5 sq m but n.exc 4sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and nexc 2 sqm each complete all as specified and directed.

S&F Solid panel PVC internal door frame (prelam) of size 50mm x 95 mm made out of 5mm one side prelam colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing .The door frame shall be fixed to the wall using 65/100mm long SS Screws through the frame by using PVC fastners. A minimum of 4nos of screws to be provided for each vertical member & minimum 2 Nos complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing inframe at site as per specification & drawing complete all as specified and directed.

S&F 35mm thick 2nd class HW rail and style, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 35 mm thick II class hard wood (door) plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on the both faces. The size of rail as per IS: 1003 (Pt I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides,supplied and fitted to chowkats complete all as specified and directed.

M&L for Fe-410-W(Gde-E-250) quality-B for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and nexc 2 sqm each and refixing after easing & adjusting in same opening complete all as specified and directed.

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and nexc 2 sqm each complete all as specified and directed.

S&F in repairs MS sliding door 250 mm long bolt type stove enamelled black with bright bolt not less than 12 mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified and directed.

S&F in repairs butt hinges 100mm medium weight, cold rolled, mild steel fixed with welding or screws on position complete all as specified and directed.

S&F in repairs aluminium handles cast type anodised 150mm complete all as specified and directed.

S&F in repairs 200mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs Floor door stopper 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed.

S&F in repairs drapery rod 25 mm dia stainless steel of grade 304 with side caps etc fixed in position with stainless steel brackets complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Stainless steel butt hinges100mm fixed with SS screws complete all as specified and directed.

S&F aluminium handles cast type anodised 150mm complete all as specified and directed.

S&F 200mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F Floor door stopper 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed.

S&F in repairs stainless steel autocloser hinges of size 100 mm with SS screw for door complete all as specified and directed.

S&F in repair Aluminium powder coated decorative grill with 6.3mm thick aluminum section and 100X100mm openings , weighing not less than 1.75Kg/Sqm and anodized aluminium 'U' shape channel frame work alround the grill and fixed with steel screws complete all as specified and directed.

S&F in repair Aluminium Powder coated ventilator made of aluminium section weighting 0.55 kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, 5 mm frosted glass aluminium snap beading screws,hinges including fittings such as peg stays 150mm long (2 Nos) to each leaf, hinges 100mm long (3 Nos) each leaf and suitable handle (1 no.) to each leaf and locking arrangement (openable shutter with stainless steel wire mess and fixed glass) complete all as specified and directed.

S&F in repair locking arrangement for glass door to glass partition for glass doors of thickness 8mm to 12mm with stainless steel locking arrangememnt to lock the door from both sides including necessary cutting if required in toughned glass complete all as specified and directed.

S&F in repair stainless steel door handle 450 mm long (hole to hole) for toughned glass door including necessary holes in glass complete all as specified and directed.

S&F 12 mm thick toughend glass partition / Fixed glass/ door (shutter ) with hydraulic floor spring and top pivot and with set of new SS hydraulic floor spring & top pivot sufficent to operate for the glass doors with weight of 120-150 Kg incl cutting to shape, drilling holes required incl figured/ frosted glass film of required pattern/ logo/ shape on one side and incl fixing on Aluminium / WPC Frame (As per site requirement) incl all required accessories rubber beading, silicon, SS Handle 600mm Long of required design and shape etc Colour as approved by engr-in-Charge (Make of Hydraulic floor spring and top pivot set : Ozone, Ebco, Hardwyn) including taking down old existing glass door complete all as specified and directed.

S&F in repairs stainless steel coated double action spring hinges of size 100 mm suitable for door existing at site complete all as specified and ditected.

S&F in repair 5 mm thick window/ door glass in panels of aluminum window/doors of panel size not exceeding 1 sqm each any shape and size including heat observing film and rubber beading as per site requirement complete all as specified and directed.

S&F in repairs brass 300mm ordinary rat tail rod pattern springs including roller and roller plate fixed to wooden/steel chowkats with necessary bolts, etc complete all as specified and directed.

S&F in repair aluminium door seal upto 1200 mm long on bottom of door complete all as specified and directed.

S&F in repair door closer aluminium esxtruded section body hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S&F in repairs chromium plated/ stainless steel body mortice lock vertical type size 100 mm MS 4 lever complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, aluminium frame, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 4 mm thick frosted glass sheet of ordinary quality size n exc 0.5 sqm in each pane including any required assories beading, rubber packing etc to be fixed in aluminium frame complete all as specified and directed.

S&F 4mm thick plane Sheet glass, ordinary quality exc 0.5 sq. m in each pane complete all as specified and directed.

S&F Solar control film 25 micron reflective type (gareware sun control or equivalent) of required colour and size complete all as specified and directed.

S&F in repair glazed and gauzed three track aluminium powder coated sliding window of any size made out of Jindal extruded aluminum window classic 18mm series as mentioned below and glazed with 5 mm thick glass fixed with rubber beading/gasket and GI fly prrofing and aluminiun powder coated beading all around and lock type handle of size 75mm etc complete all as specified and directed:- (a) outer Frame with rectangular section -14035, frame bottom with section 20957 and frame top and sides with section-20958 (b) Shutter : top and side with section-20606 , interlocking with section-20605 and bottom with section-20604 (to be fix in bathroom for ventilator purpose, including make good of dismantled portion)

Supplying and laying of 20 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting including taking down old existing pipe complete all as specified and directed.

Supplying and laying of 25 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting including taking down old existing pipe complete all as specified and directed.

S&F in repair 20 mm dia Brass Elbow complete all as specified and directed.

S&F in repair 20 mm dia Brass Elbow (3/4 x 1/2) complete all as specified and directed.

S&F in repair Union 20 mm complete all as specified and directed.

S&F in repair 20 mm dia Brass Tee complete all as specified and directed.

S&F in repair Male Brass Threaded Adaptor (MTA/ MBTA) 20 mm dia complete all as specified and directed.

S&F in repair Female Brass Threaded Adaptor (FTA/ FBTA) 20 mm dia complete all as specified and directed.

S&F in repair CPVC BALL VALVE of outer dia 20 mm complete all as specified and directed.

S&F in repair CPVC Tank Adaptor of outer dia 20 mm complete all as specified and directed.

Supply only plain CPVC fittings such as socket, elbow, nipple, Tee, union, Reducer, Bushing, Step over bends, End cap, End plugs etc for 20 mm bore outer dia of CPVC pipe (ISI marked) complete all as specified and directed.

Supply only plain CPVC fittings such as socket, elbow, nipple, Tee, union, Reducer, Bushing, Step over bends, End cap, End plugs etc for 25 mm bore outer dia of CPVC pipe (ISI marked) complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and directed.

S&F 20mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and directed.

S&F in repair Rotational moulded polythylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position, 500 litres capacity complete all as specified and directed.

S&F in repair Rotational moulded polythylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position, 1000 litres capacity complete all as specified and directed.

Cleaning and removing all silt and dirt etc from tanks and form mouths of circulating pipes etc for 1000 Ltrs capacity of tanks complete all as specified and directed.

Cleaning and removing all silt and dirt etc from tanks and form mouths of circulating pipes etc for 500 Ltrs capacity of tanks complete all as specified and directed.

S&F in repairs water tank cover for water tank of capacity 500ltr fixed with brackets and screws complete all as specified and directed.

S&F in repairs water tank cover for water tank of capacity 1000 ltr fixed with brackets and screws complete all as specified and directed.

S&F in repairs ball valve of PTMT (Make Symet/Prayag) complete with aluminium rod and high density plastic ball for 20 mm dia iron pipe (Minimum weight 20mm-210gms) complete all as specified and directed.

S&F in repairs ball valve of PTMT (Make Symet/Prayag) complete with aluminium rod and high density plastic ball for 15 mm dia iron pipe (Minimum weight 15mm-142gms) complete all as specified and directed.

S&F in repairs china water closet Orissa Pan 580 X440mm long pan Ist quality ISI marked with intergral foot rests, cast iron 'S' trap including provn of cement concrete bedding including connections and fixing flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed.

S&F in repairs vitreous china white wash hand basin flat back of size 550x400mm ISI marked Ist quality including CI/MS brackets including cutting for and pinning in brackets complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (padestal pattern) white including fixing of bolts to floor and fixing of seat cover, flushing cistern, flush pipe and PVC connection pipe etc complete all as specified and directed.

S&F in repairs plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised device complete all as specified and directed.

S&F in repairs factory made manholes covers with MS flat all round the cover and incl reinforecement with cement conc 1:2:4 type B-I, (20mm graded stone agg) of any thickness and size laid with cement mortar 1:6 in position complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type pillar tap swan neck for WHBs with capstan heads/ lever type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. Make: Cera Cat Part No F-2006101 or equivalent of make as specified in PS.

S&F in repair 15mm bore brass CP wall mixer (2 -in - 1 type) with L bend (provision for over head shower) fancy type for mixing hot and cold water screwed down for 15mm bore iron pipes complete all as specified and directed. Make : Prayag Cat Part No. 9375 or equivalent in of make as specified in PS.

S&F in repair 15mm bore brass CP single lever basin mixer fancy type for mixing hot and cold water screwed down for 15mm bore iron pipes complete all as specified and directed. Make : Prayag Cat Part No. 9851 or equivalent of make as specified in PS.

S&F in repairs PVC connection 15 mm bore 450 mm long with 2 Nos PTMT nuts with washer complete all as specified and directed.

S&F in repairs PVC connection 15 mm bore 600 mm long with 2 Nos PTMT nuts with washer complete all as specified and directed.

S&F in repairs, 125mm size brass chromium plated shower roses with or with out swivel joints, including fixing to steel pipe or unions complete all as specified and directed. Make: Cera Cat Part No F7020307CH or equivalent of make as specified in PS.

S&F in repair brass chromium plated 5 flow hand shower with 1.5 m flexible hose pipe including wall hook complete all as specified and directed. Make: Hindware cat Part No. F160009 or equivalent of make as specified in PS.

S&F in repairs 32 mm bore PVC waste pipe for WHB complete all as specified and directed.

S&F in repairs 40 mm bore PVC waste pipe for urinals/sink complete all as specified and directed.

S&F in repairs waste fittings brass chromium plated 32 mm dia for wash hand basin complete all as specified and directed.

S&F in repairs waste fittings brass chromium plated 40 mm bore for stainless steel sink/urinals complete all as specified and directed.

S&F in repairs PVC syphon (Make : Prayag / Jaquar / hindware) complete for low level flushing cistern complete all as specified and directed.

S&F in repairs brass jumper washer, PVC gitti, screw, fastners 150mm long, brass head, capstan head, clamp for corner glass shelf, face and spindle for bib cock/pillar cock/stop cock 15 mm bore any type complete all as specified and directed.

S&F in repairs CI bracket of exiting size, for WHB or Kitchen Sink etc including cutting, necessary fitments for pinning in brackets complete all as specified and directed.

M&L for manual Sealing of traps,WCs (manually) with neat cement paste after removal of water from it, to prevent or make up the leakage including cementing in cement mortar (1:3) from inside and outside both & refixing grating, plasters etc complete all as specified and directed.

S&F in repairs PVC (SWR) 75 mm dia floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair, CI floor trap with grating including jointing to waste pipe in run lead, dia of outlet 75 mm including floor around to required depth and burning lead joints etc to facilitate and making good complete all as specified and directed.

S&F in repairs small fittings galvanised iron medium grade such as socket, elbow, nipple, Tee, union etc for 15 mm bore pipe (ISI marked) complete all as specified and directed. Note:- Refixing of old GI tubing upto 1.5 m included in rates

S&F in repairs small fittings galvanised iron medium grade such as socket, elbow, nipple, Tee, union etc for 20 mm bore pipe (ISI marked) complete all as specified and directed. Note:- Refixing of old GI tubing upto 1.5 m included in rates

S&F in repairs 10 ltrs capacity PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gutties embedded in wall with drilling machine etc complete all as specified and directed.

S&F in repairs PVC handle for low level flushing cistern complete all as specified and directed.

S&F in repairs PVC flush pipe of 32mm dia pipe with two Nos check nuts for connecting low level flushing cistern to EWC/IWC complete all as specified and directed.

S&F in repairs CP grating 100 mm dia round fixed on floor/Nahani trap fixed with white cement including necessary cutting etc complete all as specified and directed.

S&F in repair Vitreous China Counter top basin of size: 615x415x150 mm in white colour with modern design with rectangular shape, slim edges, with tap hole, anti bacterial glaze on ceramic, smooth glaze surface incl fixing on plateform with all required accessories/ fixtures complete all as specified and directed. Make: Jaquar Cat Part No DRS-WHT-37601 or equivalent of make as specified in PS.

S&F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls as in rain water pipes of four storied buildings complete all as specified and directed.

S&F in repair PVC (SWR) bends 110mm bore any radius for rain water pipes of four storied buildings complete all as specified and directed.

S&F in repair Towel rack 600 mm long with Lower Hangers, Stainless Steelof Colour : Antique Copper complete all as specified and directed. Make: Jaquar Cat Part No AKP-ACR-35781PS or equivalent of make as specified in PS.

S&F in repairs, 15 mm bore chromium plated fancy type angle valve with elegant knob screwed down high pressure screwed both ends for iron pipe or for unions complete all as specified and directed. Make: Cera Cat Part No F1015201/ Jaquar Cat Part No OPP-CHR-15053PM/ or equivalent of make as specified in PS.

S&F in repairs chromium plated brass two way bib tap fancy type screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and directed. Make: Jaquar Cat Part No ALI-CHR-85041/ Cera Cat Part No F-1017163/ or equivalent of make as specified in PS.

S&F in repairs 15 mm dia cast copper alloy stop valve screwed down for high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs 20mm bore gun matel globe or gate valves "ISI MARKED" with iron wheel, screwed both ends for iron pipes fixed complete all as specified and directed.

S&F in repairs 25mm bore gun matel globe or gate valves "ISI MARKED" with iron wheel, screwed both ends for iron pipes complete all as specified and directed.

S&F in repairs 150mm PTMT Symet Bath assest Grating square hole/without hole fixed in position over Rain Water Pipe/nahani trap with cement slurry complete all as specified and directed.

S&F in repair Urinal (Back inlet) with fixing accessories, (Jaguar Cat Part No URS-WHT-13253N or equivalent of make as specified in PS) Size : 385x325x635 mm in white Colour with Sensor mini concealed type flushing valve for urinal complete set with installation box (Battery Operated) (Jaguar Cat Part No SNR-STR-51083 or equivalent of make as specified in PS) complete including providing and fixing plugs, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; incl S&F of Battery operated urinal sensor flushing and incl required accessories for making connection with urinal, brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. Make: Jaquar Cat Part Nos mentioned above or equivalent of make as specified in PS.

S&F in repairs brass chromium plated Urinal spreader heavy duty of PTMT any colour for fixing with 15mm dia pipe.(Minimum weight 60gms) suitable for half stall urinal fixed with stainless steel screw complete all as specified and directed.

S&F in repairs 32mm bore dia Bottle Trap Size with 300 mm & 190 mm Long wall connection pipes & wall flange with colour : Black matt incl required concealed pipe upto trap with required accessories complete all as specified and directed. Make: Jaquar Cat Part No ALD-BGP-769L300X190 or equivalent of make as specified in PS.

S&F in repair 15mm bore dia Exposed part kit of single lever basin mixer wall mounted consisting of operating lever, cartridge sleeve, nipple & spout, with colour Black matt (Jaguar Cat Part No KUP-BGP-35233NKPM or equivalent of make as specified in PS) with concealed body for single lever basin mixer wall mounted (Jaguar Cat Part No ALD-CHR-233N or equivalent of make as specified in PS) incl all required accessories/ fixture to make operation complete all as specified and directed. Make : Jaquar Cat Part Nos mentioned above or equivalent of make as specified in PS.

S&F in repair Antique Copper Robe Hook in black matt complete in all respect complete all as specified and directed. Make : Jaquar Cat Part No AQN-ACR-7791 or equivalent of make as specified in PS.

S&F in repair Hand Shower (Health Faucet) with 8 mm dia, 1 meter long flexible tube & wall hook with Black matt with check nut and washers complete all as specified and directed. Make : Jaquar Cat Part No ALD-CHR-577 or equivalent of make as specified in PS.

S&F in repair Toilet roll holder with stainless steel flap with black matt paper holder complete in all respect complete all as specified and directed. Make: Jaquar Cat Part No AKP-BGP-35753PS or equivalent of make as specified in PS.

S&F in repair Thin Rim Table top basin of size: 420x420x150 mm (Jaguar Cat Part No JDS-BLM-25911 or equivalent of make as specified in PS) in Black Matt colour with Click clack waste 32 mm size full thread with 130 mm height Colour Black Matt (Jaguar Cat Part No ALD-BLM-727L130 or equivalent of make as specified in PS) modern design with Square shape, slim edges, with tap hole, anti bacterial glaze on ceramic, smooth glaze surface incl fixing on plateform with all required accessories/ fixtures complete all as specified and directed. Make: Jaquar Cat Part Nos mentioned above or equivalent of make as specified in PS.

S&F in repair (Jaguar Cat Part No SLS-BLM-6953BIUFSM or equivalent of make as specified in PS) in Black Matt colour Rimless, Blind Installation Wall Hung WC (in liew of floor mounted WC) with UF soft close cover, Hinges and accessories set, Size : 375x520x400 mm, incl single piece slim concealed cistern body in white finish (Jaguar Cat Part No JCS-WHT-2400 or equivalent of make as specified in PS) with installation kit with flush control plate Opal (Jaguar Cat Part No JCP-BLM-152415 or equivalent of make as specified in PS) of colour Black Matt incl required accessories and fixture, making all connection to make it functional incl make good complete all as specified and directed. Make: Jaquar Cat Part Nos as mentioned above or equivalent of make as specified in PS.

S&F in repairs PVC mirror cabinet of size 350 mm x 450 mm x150 mm with openable single looking mirror with PVC inner & outer shelves of any colour, complete all as specified and directed.

S&F in repair peg set of 6 fixed with rawal plug complete all as specified and directed. Make: Prayag Cat no BEA-30 or equivalent in Shakti / Hindware

S&F in repair Soap Dish Holder with Colour : Black Matt Finish complete in all respect complete all as specified and directed. Make : Jaquar Cat Part No AKP-BLM-35731PPD or equivalent of make as specified in PS.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

M&L for resolving complaints for petty repair to leaking water in bib tap, pillar tap, stop cock, angle valve, flushing cistern, WHB, Sink, wall mixer etc of any description any size by changing the washers (s)/jumper (s) etc, by adjusting/replacing the washer(s) and adjustment of lever required for making the flushing cistern functional, by tighting the leaking waste pipe of WHB/Sink and providing 'M' seal to stop leakage as required. Removal of air lock/blockage of water in GI water tubing and cleaning the pipe or fitting etc including replacement of major defective item if required, complete all as specified and directed by Engineer-in-Charge. Any type of complaint related to plumber and other connected items need to be catered for by the contractor. Note:- 1. Contractor may have to deploy more manpower in the particular area including all necessary T&P / equipmen to resolve the complaint within 06 hours of complaint received (on same day). 2. In case contractor fails to get the complaint rectified within 06 hours of complaint received, he shall be penalised for the same at a flat rate of Rs 200/- per complaint, in addition to cost incurred by the department for rectification of complaints from third party. 3. Proper records (date wise) of complaints received & rectified by the contractor shall be maintained and shall be produced for verification at the time of payment of each RAR/Bill. Note :- Day to day Complaint received from user's of NOM Varuna and NCN Data Centre should be resolved within 06 hours of complaint received. 4. The contractor must keep in mind the above said provisions while quoting his rates.

M&L for resolving complaints repair to easing of any type of Doors/Window/CupBoard shutters incl Aluminium and toughened doors by tightening of hinges /handles/ aldropbolt/ towerbolt/ knobs,hasp and staple, mortice lock etc of any size/any number of panels for easy closing/ opening or changing the positionof hinges,adjustments of tower bolts,sliding bolts, door closer incl replacement of looking mirror, floor spring, alu/rubber beadings, curtain rod etc complete including replacement of major defective item if required, complete all as specified and directed by Engineer-in-charge. Any type of complaint related to carpenter and other connected items need to be catered for by the contractor. Note :- 1. Contractor may have to deploy more manpower in the particular area including all necessary T&P / equipmen to resolve the complaint within 06 hours of complaint received (on same day). 2. In case contractor fails to get the complaint rectified within 06 hours of complaint received, he shall be penalised for the same at a flat rate of Rs 200/- per complaint , in addition to cost incurred by the department for rectification of complaints from third party. 3. Proper records (date wise) of complaints received & rectified by the contractor shall be maintained and shall be produced for verification at the time of payment of each RAR/Bill. Note :- Day to day Complaint received from user's of NOM Varuna and NCN Data Centre should be resolved within 06 hours of complaint received. 4. The contractor must keep in mind the above said provisions while quoting his rates.

M&L for cleaning of all blockages of Nahani traps/floor traps/bottle traps, blockages of WC's, Rain water pipes, Rain water spouts at roof level, 100 mm dia CI pipes upto 1st manhole/GT in shafts, vertical CI soil/waste pipe stacks, CI Tee/door bends etc & cleaning of drain pipes 150 mm to 300 mm internal dia by rodding and manholes upto 3.0 metre in depth and removal of sludge/silt/liquid mud sand (in foul conditions) etc, out of MOD premises (at the location notified by the local Municipal Corporation/Cantt board) complete all as specified and directed by the Engineer-in-Charge to maintain internal & external sewage system in functional state at all the time. The contractor shall engage required skilled manpower and provide all necessary tools and plants (manual/pressure cleaning pump and flexible rods and other necessary equipment (as per rules of public health), etc to ensure resolution of complaint in time frame as desired by Engineer-in-Charge. Any type of complaint related to cleaning of sewage line and other connected items need to be catered for by the contractor. Note :- 1. Contractor may have to deploy more manpower in the particular area and deploy adequate sewage cleaning machinery/ equipment to clean the line and open blockages within 06 hours of complaint received (on same day). 2. In case contractor fails to get the complaint rectified within 06 hours of complaint received, he shall be penalised for the same at a flat rate of Rs 200/- per complaint , in addition to cost incurred by the department for rectification of complaints from third party. 3. Proper records (date wise) of complaints received & rectified by the contractor shall be maintained and shall be produced for verification at the time of payment of each RAR/Bill. Note :- Day to day Complaint received from user's of NOM Varuna, NCN Data Centre should be resolved within 06 hours of complaint received. 4. The contractor must keep in mind the above said provisions while quoting his rates.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. Note: (a) The work described in these items (1 to 177) shall be executed in bldgs up to (G+3 floor) hence the contractor shall make scaffolding arrangements, trestles, ladders etc and hessian clothes for protection & all other safety precautions up to 04 storeys of buildings and the cost for the same is deemed to be included in the quoted unit rates. (b) Removing building materials /old waste unwanted existing material of any description or any type etc.on alternate day to a distance of 5km or beyond out side MOD Land and the cost for the same is deemed to be included in the quoted unit rates. (c) Excavation to be carried out manually if during excavation there are any LT/HT cables, water supply pipe lines and other cable / pipe comes, need to be shifted carefully incl required fittings / accessories and cost of same to be deemed into quoted rates. Note: (a) Srl Item No 4.00 to 7.00, 11.00 to 16.00, 29.00 to 33.00, 37.00, 38.00, 42.00, 43.00, 55.00 to 57.00, 86.00, 154.00 to 156.00, 161.00, 164.00, 166.00 to 170.00 & 172.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody. (b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge.

B Kumar and Co (BID ID -3357319)

sony engineering works (BID ID -3342121)