Provision of vocational Lab2 Kendriya Vidyalaya Suranusi under AGE I Suranussi

Amount

Surface dressing n exc 15cm deep and getting out in loose / soft soil all as specified and directed by Engineer - in – Charge.

Excavation in trenches not exc 1.5 m wide and not exc 1.5m deep and getting out in soft/loose soil complete all as specified

Excavation in trenches not exc 1.5 m wide depth exc. 1.5 m depth and not exc 3.0m getting out in soft/loose soil complete all as specified

M & L for PCC 1:4:8 type D2 using 40mm agg as in foundation filling and mass concrete complete all as specified

M & L for RCC M-25 (Design mix) for slabs supported on walls, beams, columns and in shelves, the like all as specified and directed by Engineer - in - Charge .

M&L for RCCM-25 design mix as in footing, plinth beam like all as specified and directed

M & L RCC M-25 (design mix) as in beams, cantilevers, bressummers, lintels over 1.5mtr clear span, chajja etc all as specified and directed by Engineer - in - Charge.

M & L RCC M-25 (design mix) as in columns, pillars, piers, posts and struts all as specified and directed by Engineer - in - Charge.

M&L for brick works built in cement mortar (1:6) using sub class ‘B’ bricks (old size) straight or curved on plan exc. 6mm mean radius complete all as specified.

Returning ,filling in including spreading, levelling,watering and ramming in layers n. exc 25 cm thick each complete all as specified

Spreading and levelling in layers n exc. 25 cm thick well ramming including watering as required

Form work to sides and soffits of beams, chajjas and the like for rough finished surfaces complete all as specified and directed by Engineer – in – Charge.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) and similar work vertical or to batter copmlete all as specified

Form work to soffits of suspended slab such as roof slab n. exc 200mm thick (horizontal or sloping ) with rough finished surface complete all as specified

Form work to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular for rough finished surface of concrete all as specified and directed by Engineer - in - Charge.

Form work to edges of concrete flats,treads,floors and roofs n. exc 20cm wide and sides of RCC/PCC bands in wall, horizontal or sloping and similar works exc 10 cm but n.exc 20 cm wide complete all as specified

M & L TMT bars 10 mmm dia and over dia cut to length bent to shape required including cranking, bending and binding with and including ms wire (annealed) n. less than 0.9mm dia or securing with clips complete all as specified

Ditto all as per item No above but 6mm to 8mm dia

All as per ser item above but 5mm dia and over as in stirrups, spacers and binders

M&L for rendering 15 mm thick in CM 1:6 on brick or concrete wall surfaces and surface finished even & smooth without using extra cement complete.

M&L for 15 mm thick cement plastering in cement mortar (1:4) on fair faces of brick work or concrete surfaces with using water proofing compound finished even & smooth without using extra cement complete all as specified.

M & L for 5 mm thick plaster in cement mortar 1:3 finished even and smooth without using extra cement to ceiling/chajja’s complete all as specified.

M&L for preparation of new plastered surfaces of any description not otherwise described and applying Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified.

M&L for preparation of new plastered surfaces of any description not otherwise described and applying two coat of plastic emulsion paint over a coat of primer paints on walls complete all as specified and directed.

M&L for preparation of new plastered surfaces of any description not otherwise described and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:4 with using water proofing compound on concrete slab and surface finished even & smooth without using extra cement complete.

Supply only Integral waterproofing compound ISI maked conforming to IS-2645

M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm over a coat of primer including cleaning surfaces complete all as specified and as directed by engineer-in-charge.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by torch application with two coats of bitumen based aluminium paint complete all as specified (Bldg ht upto 10 m)

M & L Hardcore (broken bricks)of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2(using 40mm graded stone aggregate) as in plinth protection complete all as specified and directed

M&L PCC 1:4:8 type D-2 using 40 mm graded stone agg as in mass filling and sub base.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165)

S&F 40 mm thick flush shutter solid core construction with block board core and decorative face panels veneer with lipping/frame to match on both faces complete all as specified and as directed

M&L for 35mm th IInd class Hard Wood glazed /gauged shutters open rebated and prepared to receive glass /gauge etc without sash bars edges of framing plain or chamfered rounded fitted with cut and mitred beads for securing glass/gauge etc all as specified in SSR Part I section 8 clause 8.2(a) including helical Door spring complete all as specified and as directed

M & L 25 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination,including magnetic catcher and all kitchen cabinet accessories and fixed with screws to timber frame work

S&F 300mm size aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts sliding bolts of extruded section incl a minimum of six nut and bolts ,four on bolt plate and two on stapple plate complete all as specified

S&F floor door stopper aluminium alloy body and tounge 140mm anodised with hard drawn steel spring etc complete all as specified and as directed by engineer-in-charge.

S&F 125 mm size extruded aluminium alloy pressed handle stove enamelled black and fixed complete all as specified and as directed by engineer-in-charge.

S&F 100 mm size mild steel butt hinges medium weight cold rolled complete all as specified and as directed by engineer-in-charge.

S&F anodised aluminium frame powder coated with minimum thickness of powder coating 50 micron for doors, windows, ventilators with one or more rebates including joining cleat for fixing, hinges etc. complete all as specified. complete all as specified and directed. Note:- Prelaminated partical board and sheet glass/wiremesh shall be measured and paid for separately.

S & F for Anodised aluminium window and ventilator shutters,Powder Coating (minimum thickness of powder coating 50 micron) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats,hook and eye closure,Each door having 02 Nos D type handles, 02 Nos aluminium tower bolts 300 mm size, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F galvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staple complete all as specified and as directed by engineer-in-charge.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm each panes complete all as specified.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm each panes complete all as specified.

M&L for two coats synthetic enamel paint new wooden surface over 10 cm width or girth over a coat pink primer incl preparation of surfaces.

M&L 18-20 mm th machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, over and including 20 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge.

All as per item above but as in skirting over 10mm th rendering in CM 1:4 complete all as specified and directed by Engineer-in Charge.

M&L for 25 mm th Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified including Screed bed or bedding layer of mortar 20 mm thick in CM 1:4 for laying floor finishes complete all as specified.

M&L for glazed ceramic tiles coloured of size 450 mm x 350 mm x 7mm th on vertical surfaces such as in skirting, dado etc over 10 mm th backing coat in cm 1:4 complete all as specified

M&L PCC 1:4:8 type D-2 using 40 mm graded stone agg as in mass filling and sub base.

Sand filling under floors or in foundations including watering and consolidation

5M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed by Engr - in - Charge.

S&F laboratory sinks made of stainless steel 1 mm thick laboratory with plugs, washers, waste pipe and waste coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe bowl overall size 495mmx420mm bowl size 410mm x 330mm x 160mm complete all as specified.

S&F 15 mm bore dia bib tap (long or short body) cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union fancy type chromium plated concealed complete all as specified and as directed by engineer-in-charge.

S&F 15 mm dia GI tubing , medium grade, and connections fixed to wall or ceiling, laid in floor etc complete all as specified and as directed by engineer-in-charge.

S&F pvc connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by engineer-in-charge.

S&F in 15mm size Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by engineer-in-charge.

S&F Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 Make : Sintex / Frontier / Polycon complete all as specified and as directed

Supply and fix 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches complete all as specified and directed by Engineer-in-Charge

S&F PVC SWR pipe 75 mm dia laid in treanches , single socketed in any length with rubber ring joints fixed to walls etc all as specified

Material and labour for concealed point wiring with stranded copper conductor Cable PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including in PVC conduit of suitable size In stone wall with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow,Tee,collers bend, PVC conduit for crossing etc. complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core sheathed cable continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for :-

(a) One light point controlled by one switch with cable 1.5 Sqmm Size

(b) One Celing fan /Exhaust Fan point controlled by one switch with cable 1.5sqmm size

(c) One 5 pin socket outlet 5 Amps on the same board

All as per item No- 62 above but One 15/16 A socket outlet independent with 2.5 sq mm PVC cable and 2.5 sqmm cable as earth continuity wire.

Supply & Fixing Modular Switch 1 way 6A, 1 module.

Supply & Fixing Modular Switch 1 way 16A,1 module

Supply and fixing Socket, 6A-2/3 pin combined 2 module.

Supply and fixing Socket 6A/16A-2/3 pin combined 2 module.

Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

Supply and fix modular fan step regulator,120W - 2 module

Supply and fix modular white cover plate with frame - 12 module

Supply and fix modular white cover plate with frame - 8 module

Supply and fix modular white cover plate with frame - 4 module

Supply and fix modular metal flush box for 12 module

Supply and fix modular metal flush box for 8 module

Supply and fix modular metal flush box - 4 module

S & F Double door sheet metal enclosures factory made DBs 4 way TPN ,415 volts,protection class IP-43, SUITABLE FOR FIXING OF MCBs,Isolators etc,confirming as per IEC 61439-3,Suitable for flush Mounting and surface mounting, With Neutral bar,Earthbar and cable ties for cable management,fully shrouded Neutral bars,prefitted masking sheet complete all as specified and as directed

S&F LED tube light 20 Watt fitting white powder coated slim box type batten made of formed CRCA sheet with snap on installer sutable for single side connection LED tube in and including batten and tube etc complete in all respect.

S&F MCBs Single Pole of 240 volts 6-32 Amps,10KA Capacity, 'C' Series in in MCB DB complete with connection testing and commissioning

Supply & Fix Exhaust Fan heavy duty, Steel body AC Single Phase, 230 Volts of size 300 MM Sweep with blades & frame and Louvers

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker(MCB) of TPN 40 to 100 Amp current carrying capacity in the DB complete with connection testing and commisioning.

Material and Labour in for submain wiring with two runs of single 4 sqmm PVC insulated unsheathed multistranded 1100 vols grade with copper conductor drawn through and including in pvc conduit medium grade ISI marked and its accessories including one run of single core 4 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth contuinity conductor along with the wiring and connected from DB to DB/ main board complete all as specified and as correct.

Earthing complete with galvanised steel earth plate electrode 60x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 3 connected to earthing test point all as specified or indicated including testing on complection., earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick, all around including top and bottom and watering pipe 20mm bore of GI pipe light grade with funnel and wire mesh, PCC chamber of size 300x300x300mm (top of chamber minimum 15 cm above the normal ground level (1:3:6) using 20mm graded stone aggregate and RCC cover (1:2:4) type B-I using 20mm graded crushed stone aggregate with 1 nos MS handles of 8mm dia including necessary excavation/ earth work in any type of soil/rock and as shown in Electrical plate No. 3 of SSR Part-I (2020) testing on completion complete all as specified.

Supply and fixing sheet steel enclosure with double door, detachable gland plates flush/surface mounting for MCB fitted with bus bar, earth bar and neutral link 8 way SPN 240 V complete all as specified and as directed.

Supply and fixing LED Street light fitting 35 Watt 230 AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete.all as specified and as directed.

S&F MCBs Single Pole & Neutral of 240 volts 6-32 Amps,10KA Capacity, 'C' Series in in MCB DB complete with connection testing and commissioning

Supply, laying or fixing or passing through GI pipe, HDPE (DWC pipe) commissioning and testing of XLPE insulated, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade of the following cross section area including suitable size lugs including taking out /dismantling of existing cable size 25 sq mm 4 core. Make : Havells, Finolex, CCI. Note:- Excavation & earth work, sand cushioning, bricks protection & GI pipe where required shall be measured & paid separately under relevant items:-

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point soft /loose soil all as directed by Engr-in-Charge.

Supply and laying in trenches, in any length, Galvanised water tubing, medium grade, nominal dia 20 mm, with all fittings, testing complete all as specified and as directed

Supply and fixing gun-metal stop cock, valves, 20mm bore of pipe, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Cutting existing steel tubing of 20 mm bore pipe for alterations or additions (Each cut measured) with screwing existing steel for alterations or additions (or lengthening screw on pipe to form connector) adding to above if necessarily done in position without taking down.

M/s Dinesh Kumar (BID ID -3283866)

AAY KAY Constructions (BID ID -3280011)