Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.0 CrAccepted-AOC WARD NO 2 DELHI ALWAR ROAD NUH MEWAT 122107 | NUH | MEWAT | HARYANA | 122107 | ₹8.0 Cr | L1 | Accepted-AOC Due to L1 |
| 2 | L2₹8.4 CrRejected-AOC 1804 SECTOR 2 ROHTAK 124001 | ROHTAK | HARYANA | 124001 | ₹8.4 Cr | L2 | Rejected-AOC Due to L2 |
| 3 | L3₹8.9 CrRejected-AOC MD22 ELDECO MENSIONZ SOHNA ROAD NEAR FAZILPUR CHOCK GURGAON FF 19 OMAXE GURGAON MALL SOHNA ROAD GURUGRAM 2021R5777 | GURUGRAM | GURUGRAM | HARYANA | ₹8.9 Cr | L3 | Rejected-AOC Due to L3 |
| 4 | L4₹9.1 CrRejected-AOC 858 SECTOR 23 127021 | BHIWANI | HARYANA | 127021 | ₹9.1 Cr | L4 | Rejected-AOC Due to L4 |
| 5 | L5₹9.4 CrRejected-AOC 81 ARYA NAGAR ASSANDH ROAD PANIPAT HARYANA 132103 | PANIPAT | HARYANA | 132103 | ₹9.4 Cr | L5 | Rejected-AOC Due to L5 |
| Sl No | Description | Qty | Unit | Bansal Construction Co, Gurgaon L3 | M/S SHREE BALAJI BUILDERS L4 | Narender Singh Contractor L2 | VINAY KUMAR CONTRACTOR L8 | Hamid Hussain, Contractor L1 | RAJEEV KUMAR GOEL CONTRACTORS L6 | Rajesh Kadiyan Contractor L5 | arjun buildtech private limited L7 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Provision for Making house connection of Water supply
damaged during Excavation | 500 | Each | 500 ₹2.5 L | 450 ₹2.3 L | 500 ₹2.5 L | 800 ₹4 L | 720 ₹3.6 L | 759 ₹3.8 L | 500 ₹2.5 L | 1,000 ₹5 L |
| 2.00 | Providing, Laying, Jointing
testing and commissioning
of MS Pipe and specials of
required size
(150mm,200mm,250mm as
per site requirement) for
suction pipe from UGT and
delivery pipe including all
specials, welding of flanges
plates Nut bolts ,Rubber
Gasket, fixing of NRV And
Sluice Valve with extension
Joint etc. upto Raising main
complete Job in all respects
in entire satisfaction of
Engineer in charge | 10 | Job | 1,20,000 ₹12 L | 1,10,000 ₹11 L | 1,00,000 ₹10 L | 1,60,000 ₹16 L | 1,35,000 ₹13.5 L | 1,42,230 ₹14.2 L | 1,50,000 ₹15 L | 1,60,000 ₹16 L |
| 3.00 | Provision for restoration of Sewer connection damaged due to
laying of New sewerage Network complete in all respect. | 400 | Each | 2,000 ₹8 L | 1,500 ₹6 L | 1,700 ₹6.8 L | 3,000 ₹12 L | 2,520 ₹10.1 L | 2,655 ₹10.6 L | 1,000 ₹4 L | 3,000 ₹12 L |
| 4.00 | Providing for probe radar survey to check any underground
obstruction before finalizing the alignment. | 2 | No. | 800 ₹1,600 | 1,000 ₹2,000 | 1,000 ₹2,000 | 1,200 ₹2,400 | 900 ₹1,800 | 949 ₹1,898 | 2,000 ₹4,000 | 1,000 ₹2,000 |
| 5.00 | Supply and erection of Cubical type L.T. Panel board, having independent incoming and outgoing feeder, fabricated from 14 SWG, CRCA sheet | 2 | Each | 4,40,000 ₹8.8 L | 4,90,000 ₹9.8 L | 4,70,000 ₹9.4 L | 5,50,000 ₹11 L | 4,86,000 ₹9.7 L | 5,12,028 ₹10.2 L | 5,40,000 ₹10.8 L | 5,50,000 ₹11 L |
| 6.00 | Supply, erection, testing and commissioning of submersible motor pumping set non clog for sewerage having head 18 mtr. As per the indicated requirement of discharge in LPM and power capacity in BHP as per IS mark including all acssories like SS pipe, SS chain, SS foundation bolt, complete base frame, monorail, chain guildeline, autocupling, duckfoot band etc. complete in all respec. 12000 LPM 15 Mt. Head 70 BHP | 4 | Each | 5,15,000 ₹20.6 L | 6,00,000 ₹24 L | 5,60,000 ₹22.4 L | 6,20,000 ₹24.8 L | 5,53,500 ₹22.1 L | 5,83,143 ₹23.3 L | 6,15,000 ₹24.6 L | 6,25,000 ₹25 L |
| 7.00 | Provision for making connection with the existing minor /drain for disposal of the strom water and making it in its good condition, complete in all respect. | 2 | Job | 1,50,000 ₹3 L | 1,50,000 ₹3 L | 1,30,000 ₹2.6 L | 2,00,000 ₹4 L | 1,80,000 ₹3.6 L | 1,89,640 ₹3.8 L | 2,00,000 ₹4 L | 2,00,000 ₹4 L |
| 8.00 | Providing, laying and Jointing of 900 mm i/d M.S. Casing pipe 9.5 mm thick (Fe-330 grade) fabricated as per IS: 3589 of 1991 from steel plates conforming to IS 2062 of following sizes including cutting, beveling, grinding and radio graphically welding of pipes as per IS-1182 complete in all respect and also coating of inner and outer surface of casing pipe with high built epoxy paint to R.D.S.O. as per specification No.MandC/PCN.III/88 to a dry film thickness of 250 micron for protection against corrosion complete in all respect under Railway track including cartage of material to site of work and testing complete in all respect as per satisfaction of Engineer-in-Charge | 30 | Meter | 15,000 ₹4.5 L | 17,000 ₹5.1 L | 14,000 ₹4.2 L | 20,000 ₹6 L | 16,150 ₹4.8 L | 17,016 ₹5.1 L | 17,900 ₹5.4 L | 18,000 ₹5.4 L |
| 9.00 | Providing, laying and Jointing of 800 mm i/d M.S. Casing pipe 9.45 mm thick (Fe-330 grade) fabricated as per IS: 3589 of 1991 from steel plates conforming to IS 2062 of following sizes including cutting, beveling, grinding and radio graphically welding of pipes as per IS-1182 complete in all respect and also coating of inner and outer surface of casing pipe with high built epoxy paint to R.D.S.O. as per specification No.MandC/PCN.III/88 to a dry film thickness of 250 micron for protection against corrosion complete in all respect under Railway track including cartage of material to site of work and testing complete in all respect as per satisfaction of Engineer-in-Charge | 110 | Meter | 15,000 ₹16.5 L | 17,200 ₹18.9 L | 13,500 ₹14.8 L | 18,000 ₹19.8 L | 15,795 ₹17.4 L | 16,641 ₹18.3 L | 17,500 ₹19.3 L | 18,000 ₹19.8 L |
| 10.00 | Providing, laying and Jointing of 600 mm i/d M.S. Carrier pipe 9.50 mm thick (Fe-330 grade) fabricated as per IS: 3589 of 1991 from steel plates conforming to IS 2062 of following sizes including cutting, beveling, grinding and radio graphically welding of pipes as per IS-1182 complete in all respect and also coating of inner and outer surface of casing pipe with high built epoxy paint to R.D.S.O. as per specification No.MandC/PCN.III/88 to a dry film thickness of 250 micron for protection against corrosion complete in all respect under Railway track including cartage of material to site of work and testing complete in all respect as per satisfaction of Engineer-in-Charge | 30 | Meter | 12,000 ₹3.6 L | 13,500 ₹4.0 L | 12,200 ₹3.7 L | 15,000 ₹4.5 L | 12,780 ₹3.8 L | 13,465 ₹4.0 L | 14,200 ₹4.3 L | 15,000 ₹4.5 L |
Tender Value
₹10.4 Cr
EMD Value
₹20.8 L
Closing Date
27 Jan 2026, 1:00 pmClosed
AMIT KUMAR SANDILA
Nuh (P) PHED No. 1
Construction of Storm Water Drains and Remodling of the existing Storm Water Drains for Storm Water Drainage System in NUH Town District NUH.
2026_HRY_495215_1
20269913DF0F 3C56 4FBC 8FAC 47040F541443560PUH
Open Tender
Civil Works
400 days
Nuh
Construction of Storm Water Drains and Remodling of the existing Storm Water Drains for Storm Water Drainage System in NUH Town District NUH.
2 documents required · 2 mandatory
₹20,000
₹20.8 L
Yes
11 Mar 2026
6 Jan 2026
27 Jan 2026
6 Jan 2026
27 Jan 2026
6 Jan 2026
Provision for Making house connection of Water supply damaged during Excavation
Providing, Laying, Jointing testing and commissioning of MS Pipe and specials of required size (150mm,200mm,250mm as per site requirement) for suction pipe from UGT and delivery pipe including all specials, welding of flanges plates Nut bolts ,Rubber Gasket, fixing of NRV And Sluice Valve with extension Joint etc. upto Raising main complete Job in all respects in entire satisfaction of Engineer in charge
Provision for restoration of Sewer connection damaged due to laying of New sewerage Network complete in all respect.
Providing for probe radar survey to check any underground obstruction before finalizing the alignment.
Supply and erection of Cubical type L.T. Panel board, having independent incoming and outgoing feeder, fabricated from 14 SWG, CRCA sheet
Supply, erection, testing and commissioning of submersible motor pumping set non clog for sewerage having head 18 mtr. As per the indicated requirement of discharge in LPM and power capacity in BHP as per IS mark including all acssories like SS pipe, SS chain, SS foundation bolt, complete base frame, monorail, chain guildeline, autocupling, duckfoot band etc. complete in all respec. 12000 LPM 15 Mt. Head 70 BHP
Provision for making connection with the existing minor /drain for disposal of the strom water and making it in its good condition, complete in all respect.
Providing, laying and Jointing of 900 mm i/d M.S. Casing pipe 9.5 mm thick (Fe-330 grade) fabricated as per IS: 3589 of 1991 from steel plates conforming to IS 2062 of following sizes including cutting, beveling, grinding and radio graphically welding of pipes as per IS-1182 complete in all respect and also coating of inner and outer surface of casing pipe with high built epoxy paint to R.D.S.O. as per specification No.MandC/PCN.III/88 to a dry film thickness of 250 micron for protection against corrosion complete in all respect under Railway track including cartage of material to site of work and testing complete in all respect as per satisfaction of Engineer-in-Charge
Providing, laying and Jointing of 800 mm i/d M.S. Casing pipe 9.45 mm thick (Fe-330 grade) fabricated as per IS: 3589 of 1991 from steel plates conforming to IS 2062 of following sizes including cutting, beveling, grinding and radio graphically welding of pipes as per IS-1182 complete in all respect and also coating of inner and outer surface of casing pipe with high built epoxy paint to R.D.S.O. as per specification No.MandC/PCN.III/88 to a dry film thickness of 250 micron for protection against corrosion complete in all respect under Railway track including cartage of material to site of work and testing complete in all respect as per satisfaction of Engineer-in-Charge
Providing, laying and Jointing of 600 mm i/d M.S. Carrier pipe 9.50 mm thick (Fe-330 grade) fabricated as per IS: 3589 of 1991 from steel plates conforming to IS 2062 of following sizes including cutting, beveling, grinding and radio graphically welding of pipes as per IS-1182 complete in all respect and also coating of inner and outer surface of casing pipe with high built epoxy paint to R.D.S.O. as per specification No.MandC/PCN.III/88 to a dry film thickness of 250 micron for protection against corrosion complete in all respect under Railway track including cartage of material to site of work and testing complete in all respect as per satisfaction of Engineer-in-Charge
Providing, laying and Jointing of 500 mm i/d M.S. Carrier pipe 8 mm thick (Fe-330 grade) fabricated as per IS: 3589 of 1991 from steel plates conforming to IS 2062 of following sizes including cutting, beveling, grinding and radio graphically welding of pipes as per IS-1182 complete in all respect and also coating of inner and outer surface of casing pipe with high built epoxy paint to R.D.S.O. as per specification No.MandC/PCN.III/88 to a dry film thickness of 250 micron for protection against corrosion complete in all respect under Railway track including cartage of material to site of work and testing complete in all respect as per satisfaction of Engineer-in-Charge
Boring / excavation including pit making at entry and exist point to the prices dimension for the launch of the specialized Auger boring machine in normal soil condition but not in Rock / Bolders / any underground utility like foundation, Water Supply line coming in alihnment or other underground obstructions including caution sing boards , signals, watching fencing, site clearance etc. for MS Casing Pipe of size 900mm i/d
Boring / excavation including pit making at entry and exist point to the prices dimension for the launch of the specialized Auger boring machine in normal soil condition but not in Rock / Bolders / any underground utility like foundation, Water Supply line coming in alihnment or other underground obstructions including caution sing boards , signals, watching fencing, site clearance etc. for MS Casing Pipe of size 800mm i/d
Providing and Fixing HDPE Specer to be fitted in MS casing pipe of size 900 mm i/d and Carrier pipe of size 600 mm i/d complete job including labour charges, cartage of material to site of work complete in all respect as per satisfaction of Engineer-in Charge.
Provding, jointing, laying, testing and commissioning of HDPE PE - 100/PN - 6 (suitable for pulling method for jointing) pipes for sewer line as per IS - 14333 (amended upto date) with compliance for maintaing slope as per design by trenchless adopting HDD method (Horizontal Directional Drilling) below ground at all depth including carriage etc. complete in all respect, construction of thrust pit and receivng pit of required size upto 3 metre depth and soil investingaion making suitable arrangement for barricating of pits trafic diversion, lights, traffic permssion from reevant authority through department will assist in geting the permision), refilling of pits in compacted layers of 150 mm including disposal of surplus the direction of th Engineer. Note - I length of pipe shall be measured in between the outer wall of two manholes/ inspection chambers, pipe in the manhole/ inspection chambers/ inspection chambers, pipe in the manhole/ inspection chambers wall shall deemed to be included the item of manhole/ inspection chmber shall not be payble. Note - 2 Manual pipe jacking is not permitted for workmen safety reasons. 630 mm outer dia HDPE pipe
Supply and fixing of Sluice Valves IVC / VAG make (600 mm i/d)
Supply and fixing of Sluice Valves IVC / VAG 300 mm i/d
Supply of submersible motor pumping set non clog for sewerage having head 15 mtr. As per the indicated requirement of discharge in LPM and power capacity in BHP as per IS mark including all accessories like SS pipe, SS chain, SS foundation bolt, complete base frame, monorail, chain guideline, autocupling, duckfoot band etc. complete in all respec. 8000 LPM 15 Mt. Head 45 BHP
Percentage BoQ
BoQ_Ver3.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
HSR Itmes
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.05 MB
1F4BN0Z147293.pdf
Additional Documents • 3.83 MB
OT0147293.pdf
Other Document • 0.75 MB
BOQ_573686.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid