C/o Govt. Senior Secondary School Building (First Floor) at Ramanagar

Amount

Centering and shuttering including strutting, propping etc. and removal of form including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge.for

Foundations, footings, bases of columns, etc. for mass concrete

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Stairs, (excluding landings) except spiral-staircases

Edges of slabs and breaks in floors and walls

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement including curing with 1:1.5:3 (1cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge

Providing and laying cement concrete in retaining walls, return walls,walls (any thickness) including attached pilasters, columns, piers,abutments, pillars, posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills,fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:3:6 (1 cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size)including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement :6coarse sand) including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) 2nd Class deodar wood including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows.including black enamelled iron butt hinges with necessary screws 2nd Class deodar wood including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws 2nd Class deodar wood including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge.

15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge

6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge: 150x10mm

Providing and fixing aluminium hanging floor door stopper,ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge : 125mm.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge: 100mm.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of tiles 600 x 600 mm anti skid including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications. Painting wood work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.75 ltr/ 10 sqm of approved brand and manufacture including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications. Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.trusses and trussed portin in building including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m²

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge

Providing and fixing 30 cm.wide 120 cm. overall semicircular plain G.I. sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge.

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single pushfit Coupler 110 mm including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge

Providing and fixing M.S. BP Sheet 1.66mm to 20mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube 40mm nominal bore including hauling of material in all leads and lifts and and as per entire satisfaction and directions of the Engineer in Charge

Sunny Chauhan

Narender Singh