SPL REP TO BLDG NO. BO4 AND BO9 (OFFRS ACCN) OF HQ 101 AREA, AND OR MD ACCN QTR NO 80/1 AND 81/06 AT LSM LINE AND REPAIRS TO CGI SHEET/RCC AND WIRING AT P-242,P-243 AND P-244 (JCO SINGLE ACCN) OF F COMP SIG REGT AT SHILLONG UNDER GE SHILLONG

Amount

Dismantling of plain or corrugated steel sheeting any guage thickness including Nainital or similar pattern roof covering complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons laid in any mortar complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section in any position (unframed work) complete all as specified and directed.

All as per item No 3.00 here in above but in fillets, rails, posts, rafters, purlins etc under 40 Sqcm in section complete all as specified and directed.

Taking down Chowkhats or frames exc 1.5 Sqm but n.exc 4 Sqm each but with shutters (without taking off shutters from the frame) including builders hardware each complete all as specified and directed.

Taking down Chowkhats or frames n.exc 1.5 Sqm each but with shutters (without taking off shutters from the frame) including builders hardware each complete all as specified and directed.

Taking down shutters of any description n.exc 1.0 Sqm resecuring or easing, adjusting and refixing in same opening complete all as specified and directed.

Taking down shutters of any description exc 1.0 and not exc 2.0 Sqm resecuring or easing, adjusting and refixing in same opening complete all as specified and directed.

Taking down shutters of any description exc 1.0 Sqm but n.exc 2.0 Sqm each complete all as specified and directed.

Taking down shutters of any description n.exc 1.0 Sqm each complete all as specified and directed.

Demolition of brickwork/ solid concrete block work built in cement mortar etc complete all as specified and directed.

Demolition of cement concrete of any description in any position not otherwise specifically provided complete all as specified and directed.

Demolition of Cement Concrete of any description ( reinforced) and in any position not otherwise specifically provided for etc complete all as specified and directed by Engineer-in-Charge.

Dismantling of wall/ceiling boards of any description (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete.

Taking up or down steel tubing with connections of 15 mm bore pipe including cleaning for refixing or removal from site with all fittings complete all as specified and directed.

Taking up or down steel tubing with connections of 20 mm bore pipe including cleaning for refixing or removal from site with all fittings complete all as specified and directed.

M&L 2nd class hard wood plain fillets square rectangular or triangular in section clean sawn secured with nails or brads sectional area exc 13 sqcm n exc 25 sqcm complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for 2nd class hard wood as in scantling, clean sawn, timber fixed complete all as specified and directed.

M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of Creosote complete all as specified and directed.

M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as specified and directed by Engineer-in-Charge.

M&L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old,of any description and girth, not otherwise described, and treated with tar or coal tar black paint area tarred exc 0.10 sq. m but n exc 0.5 sq. m each complete all as specified and directed by Engineer-in-Charge.

M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts,hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed by Engineer-in-Charge.

M&L PCC type B1 ( 1:2:4, using 20mm graded crushed stone aggregates) as in anchorage block for hold fast complete all as specified and as directed.

S&F 30mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides .etc complete all as specified and as directed.

S&F 35 mm thick, 2nd class hard wood, glazed and skeleton shutter, open rebated and prepared to receive glass or gauge without sash bars , divided in to squares and edges of framing plain chamfered or rounded, fitted with cut or mitred beads for securing glass or gauge etc as specified in SSR Part-I section 8 clause 8.24 (a) complete all as specified and directed.

S&F Sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads in square n.exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all asspecified and as directed

S&F 300 mm long, Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

S&F Aluminium anodised, barrel tower bolts of extruded section 150 mm length complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts of extruded section 100 mm length complete all as specified and as directed.

S&F Extruded aluminium anodised bow handles of 100 mm length etc complete all as specified and as directed.

S&F Extruded aluminium anodised bow handles of 150 mm length etc complete all as specified and as directed.

S&F Mild Steel Butt hinges, medium weight, cold rolled, 100mm size ISI Marked complete all as specified and directed.

S&F Mild Steel Butt hinges, medium weight, cold rolled, 75mm size ISI Marked complete all as specified and directed.

M&L for Synthetic enamel paint one coat on old wooden surfaces over 10 Cm width or girth including necessary preparation of wooden surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for Synthetic enamel paint two coats over a coat of pink primer on new or previously untreated wooden surfaces over 10 Cm width or girth including necessary preparation of wooden surfaces complete all as specified and as directed.

S&F Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

S&F Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beadingscrews etc. complete all as specified and upto the entire satisfaction of Engineer in charge.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100 mm long (2 no.) suitable handle (1 no.) complete all as specified and upto the entire satisfaction of Engineer in charge.

Hacking out old broken glass (any thickness size quality or description) from wooden pane glazed with putty or fixed with wooden bends complete all as specified and directed.

S&F 4.8 mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares exc. 0.50 sqm in each pane complete all as specified and directed.

S&F 4.8 mm thick glass one side frosted , glazing with oil putty or fitted with beads in squares exc. 0.50 sqm in each pane including fixed with wooden beads / glazing pins or spring clips in wooden or metal frames complete all as specified and directed.

M&L for 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination ,for insulation purpose including taking down old unserviceable one etc completed all as specified and directed.

M&L for Block masonry with solid precast cement concrete blocks made out of cement concrete (1:3:6) type C1, using 20 mm graded stone aggregate, exc 10 Cm width and setting in cement sand mortar 1:6 complete all as specified and directed.

M&L for Block masonry with solid precast cement concrete blocks made out of cement concrete (1:3:6) type C1, using 20 mm graded stone aggregate, 10 Cm width and setting in cement sand mortar 1:4 complete all as specified and directed.

M&L 75mm thick PCC, type C2, (1:3:6, using 40 mm graded stone aggregates) as in floor, hardstanding and plinth protection and finishing the cement concrete surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for 100 mm thick PCC type D-2 , (1:4:8, using 40 mm graded stone aggregates) as in sub base of floor , finishing the cement concrete surfaces even etc complete all as specified and directed by Engineer-in-Charge.

M&L for 25mm PCC 1:2:4 type B-0 ( using 12.5mm graded crushed stone aggregates) as in sub base of floor , finishing the cement concrete surfaces even and rough without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for Non Skid coloured Ceramic tiles, joint free, 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including screed bed or bedding layer of mortar 15mm thick in cement sand mortar (1:6) for laying floor tiles complete all as specified and directed.

M&L for Non Skid coloured Ceramic tiles, joint free, 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including 10mm thick backing coat in cement sand mortar (1:4) complete all as specified and directed.

M&L for Non Skid coloured Ceramic tiles, joint free, 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including screed bed or bedding layer of mortar 15mm thick in cement sand mortar (1:6) for laying floor tiles complete all as specified and directed.

M&L Glazed ceramic colour tiles of size 300x450x7mm /300x600x7 thick in vertical surfaces etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete all as specified and directed.

M&L for Granite 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.complete all as spefied & directed

Labour only for chamfer, splays or arris in facework of granite not exc 15mm wide complete all as spefied & directed

M&L for Precast RCC 1:2:4 type B-1 ( using 20 mm graded stone aggregate ) as in cover slab, shelves and similar articles and set in cement sand mortar 1:6 including necessary formwork etc complete all as specified and directed.

M&L for Mild steel TMT deformed bars, 10 mm dia and over, cut to length bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to Fe 500D complete all as specified and directed by Engineer in Charge.

Taking down cement plaster on brick or concrete surfaces in anyposition including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debries out side MD land all specified and directed by Engineer-in-Charge.

M&L for Rendering, 15 mm thick plaster in cement sand mortar ( 1:4), in two layers, top 5 mm thick with approved Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions over a layer of 10 mm thick base layer etc complete all as specified and as directed by Engineer-in-Charge. Note WPC shall be measured and paid separately.

Supply only integral water proofing compound , ISI marked.complete all as specified and as directed.

M&L for Rendering 15 mm thick in cement sand mortar (1:6) on fair faces of concrete surfaces finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge.

S&F Anodised Aluminium frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Aluminium main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mm c/c using Gi wire of 4mm thickness Aluminium frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed .

M&L for 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed.

M&L for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165complete all as specified and directed.

S&F in repair Vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including PVC water closet seat cover closed pattern with flat bottom and cover with PVC hinge device, flushing pipe, fixing bolt for pedestal pattern and making good to disturbed surfaces of floor etc complete all as specfied and directed. Make:- Prayag cat part no.4022 or equivalent make of Parryware / Hindware.

S&F in repair Tubular towel rail, brass chromium plated ,20mm dia, D type, 60cm long between flanges etc complete all as specified and as directed.Make: Prayag / Hindware / Cera.

S&F in repair Vitreous china wash hand basin pedestal pattern white, flat back of size 550 mm x 400 mm including bracket including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, complete all as specified and as directed by Engineer-in-Charge .Make:- Prayag /Hindware/Cera

S&F in repair 15 mm bore brass CP center hole basin mixer for mixing hot and cold water ,fancy type etc complete all as specified and directed. Make : Prayag / Hindware / Jaquar/Cera.

S&F in repair CP over head showers dia around 100 mm round shape single flow ( ABS body chrome plated with grey face plate ) with rubit cleaning system with CP shower arm dia 20 mm long round shape without bend for wall mounted showers wall flange etc complete all as specified and as directed. Make: Jaguar Cat.No OHS-CHR-1989 with SHA-CHR-49483 or equivalent model from make Hindware / Prayag.

S&F in repair CP single lever wall mixer 3-in-1 system with provision for bath hand shower and overhead shower with 115 mm long bend pipe connecting legs and wall flange ( without hand & overhead shower) etc complete all as specified and as directed. Make: Jaguar Cat.part No OPP-CHR-15125PM or equivalent model from make Hindware / Prayag.

S&F in repair CP Bib tap 15 mm bore, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. . Make:- Prayag /Jaguar/ Hindware.

S&F in repairs CP angular Stop cock ,15 mm bore, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. . Make:- Prayag /Jaguar/ Hindware.

S&F in repair 15 mm bore health faucet cock with flexible pipe 1 meter long etc complete all as specified and as directed. Make: Jaquar Cat.part No ALD-CHR-565 or equivalent model from make Hindware / Prayag.

S&F in repair CP soap dish holder fixed on wall with CP screws etc complete all as specified and as directed. Make: Prayag Cat.part No BA-05 or equivalent model from make Hindware Prayag/Jaquar.

S&F in repair stainless steel Toilet paper roll holder with fixed on wall with CP screws etc complete all as specified and as directed. Make:Jaquar Cat.part No AKP-35755PS or equivalent model from make Hindware /Prayag.

S&F in repair stainless steel Towel ring square shape with round flange with fixed on wall with CP screws etc complete all as specified and as directed. Make:Jaquar Cat.part No ACN-CHR-1121N or equivalent model from make Hindware /Prayag.

S&F in repair Sheet glass corner shelf assembly with ABC bracket complete all as specified and as directed. Make- Jaquar Cat Part No CAN-CHR-1173 or equivalent model from make Parryware / Prayag

S&F in repair lever sink mixer with swinging spout on upper side(wall mountes model) with connecting legs & wall flanges complete all as specified and as directed. Make- Jaquar Cat Part No LYR-38165 or equivalent model from make Parryware /Cera/Prayag

S&F in repair CP Hand shower 24x24 mm square shape single flow with Air effect (ABS body & face plate chrome plated) with Rubit cleaning system with flexible tube in chrome finish 1.5m long with nuts complete all as specified and as directed. Make- Jaquar Cat Part No HSH-.35537 for hand shower and Jaquar Cat Part No-SHA-571 for flexible tube or equivalent model from make Parryware /prayag/Cera

S&F in repair sink made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm ,bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.Make:- Prayag / Nirali / Hindware

S&F in repair Gun metal globe/gate valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for 20 mm bore of pipe etc complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) floor trap 75 mm dia outlet, plain with grating including jointing with solvent cement etc complete all as specified and directed.

S&F in repair for PVC (SWR) 'P' trap 100/110 mm, setting and jointing with solvent cement complete allas specified and as directed by Engr-In-Charge.

S&F in repair 110 mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joint fixed to walls/laid in trenches or in floors including clamps for securing pipe complete all as specified and directed.Make:- Prince / supreme.

S&F in repair 75mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joint fixed to walls/laid in trenches or in floors including clamps for securing pipe complete all as specified and directed.Make:- Prince / supreme.

S&F in repair 110mm bore PVC (SWR) bends /door bend of any radius with cement solvent, cement joints, complete all as specified and as directed.

S&F in repair 75mm bore PVC (SWR) bends /door bend of any radius with cement solvent, cement joints, complete all as specified and as directed.

S & F in repair 75 mm bore PVC (SWR) vent cowl etc complete all as specified and directed.

S & F stack clamp out of 50mm by 5mm flat Iron and 16mm dia round iron stays incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and as directed.

S&F GI tubing 15 mm dia medium grade with all necessary GI fittings, fixed in wall, ceiling or floor with necessary clamp or hook complete all as specified and as directed.

S&F GI tubing 20 mm dia medium grade with all necessary GI fittings, fixed in wall, ceiling or floor with necessary clamp or hook complete all as specified and as directed.

M &L for Cutting chases, pinning in concrete block work, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

S&F in repair rotational moulded polyethylene 1000 ltrs capacity water storage tanks , three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end complete all as specified and directed.

M&L for complete removal of existing treatment of walls, preparing the surfaces even & smooth by rubbing with wire brush or sand paper and applying two coats of oil bound distemper over one coat of wall primer complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of newly or previously undecorated plastered surface and applying oil bound distemper two coats over one coat of wall primer over and including 3mm thick wall care putty complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment of walls, preparing the surfaces and applying one coat of white or tinned cement base paint complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces of wall and applying two coats of white or tinned cement base paint over a coat of wall primer complete all as specified and directed by Engineer-in-Charge.

S&F in repair Harison rails, mild steel, chromium plated with fixing brackets stops, rollers etc complete all as specified and directed by Engineer-in-Charge.

S&F Hat peg and hooks solid body 125mm to 175mm complete all as specified and directed by Engineer-in-Charge.

S&F Mild Steel work in tubular trusses including special shaped, washers etc including cutting welding, bending in shape etc using ERW or induction butt welded tubes confirming to IS.1161-1979 grade St-240 complete all as specified and directed by Engineer-in-Charge.

M&L for Synthetic enamel paint two coats over a coat of red oxide primer on new or previously untreated steel surfaces exc.10 Cm width or girth including necessary preparation of steel surfaces etc complete all as specified and directed by Engineer-in-Charge.

S&F Solid PVC door frame of size 50 mm X 47 mm made out of 5mm plain colour PVC sheet reinforcement with M.S square tube, etc complete all as specified and as directed .

S&F factory made pre laminated solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with single piece extruded pvc profile both side prelam PVC sheet 'C' channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and 5mm thick both side prelam single piece extruded pvc profile for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of both side prelam 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and shown on drawing given in SSR Part II. The width of stiles & rails shall be in proportion to the width of the door shutter as given in SSR Part I complete all as specified and directed

M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in surface channel and drains including necessary formwork etc complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc all as specified and directed.

M&L for machine pressed pre polished factory made pavement chequered cement concrete tiles of size 300 X 300 X 25 mm thick of approved design and colour , set jointed and pointed in neat cement slurry with grey cement and pigment over and including 15 mm thick screed bed in cement sand mortar (1:4) complete all as specified and as directed.

S&F in repair Vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, complete all as specified and as directed by Engineer-in-Charge .Make:- Prayag cat aprt no. 4645 IRIS or equivalent make of Pearl/ Hindware.

S&F 30 mm thick, 2nd class hard wood, glazed and skeleton shutter, open rebated and prepared to receive glass or gauge without sash bars , divided in to squares and edges of framing plain chamfered or rounded, fitted with cut or mitred beads for securing glass or gauge etc as specified in SSR Part-I section 8 clause 8.24 (a) complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, lamp holders, regulators, switch, socket outlets, bell push, ceiling rose etc , removing material to store for keeping in safe custody for reuse at site and making good to disturbed surfaces of walls with cement sand mortar (1:6) and white/colour wash to match with existing surfaces etc complete all as directed.

M&L Point wiring with single runs PVC insulated FRLSH grade, 1100V grade cable with multistranded copper conductor of size 1.5 Sqmm (Nominal area) (ISI Marked) drawn in and including PVC Casing capping of suitable size with all fittings and accessories including PVC rectangular board of suitable size and drawing continuous earth wire of PVC insulated FRLSH grade, unsheathed stranded copper conductor of size 1.5 Sqmm (ISI Marked) as continuous earth wire terminated in and including sunken box for following type of point wiring including making good disturbed of wall complete all as specified in SSR Part-I, 2009 and Part-II, 2010 and as directed by Engineer-in- Charge for one light point / one fan point etc on independent board controlled by one one way switch etc complete all as specified and as directed.

All as per item No 114.00 above but for one bell point controlled by one bell push complete all as specified and directed.

All as per item No 114.00 above but for one 2/3 pin socket outlet 5/6 Amps point on same board etc complete all as specified and directed.

All as per item No 114.00 above but for one 2/3 pin socket outlet 5/6 Amps point on independent board etc complete all as specified and directed.

All as per item No 114.00 above but for one light point controlled by two way switch/fan regulators complete all as specified and directed.

All as per Item No. 114.00 here-in-before but with FRLSH grade, (ISI mark) PVC insulated and unsheathed two run multistranded copper conductor of size 4.0 Sqmm for one power point of 3 pin 15 Amps on independent board including FRLSH grade (ISI mark), PVC insulated, unsheathed one run multi-stranded copper conductor of size 4.0 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

Supply and fix, modular Switch 1 way 6 Amps module 230/250 volt , AC supply ISI marked complete all as specified and directed.

Supply and fix, modular Switch 1 way 16 Amps module 230/250 volt , AC supply ISI marked complete all as specified and directed.

Supply and fix, modular bell push1 way 6 Amps module 230/250 volt , AC supply ISI marked complete all as specified and directed.

Supply and fix, modular socket 6 Amps 2/3 pin combined 2 module 230/250 volts , 50 Hz, AC supply ISI marked complete all as specified and directed.

Supply and fix, modular socket 6A / 16A , 2/3 pin combined 2 module 230/250 volts , 50 Hz, AC supply ISI marked complete all as specified and directed.

Supply and fix, modular white cover plate with frame 1 modular and metal box ISI marked complete all as specified and directed.

Supply and fix, modular white cover plate with frame 2 modular and metal box ISI marked complete all as specified and directed.

Supply and fix, modular white cover plate with frame 3 modular and metal box ISI marked complete all as specified and directed.

Supply and fix, modular white cover plate with frame 4 modular and metal box ISI marked complete all as specified and directed.

Supply and fix, modular white cover plate with frame 6 modular and metal box ISI marked complete all as specified and directed.

S&F Ceiling rose, 3 terminals PVC/polycarbonate, isolated body complete all as specified and directed.

Supply and fix, call bell ding dong, 230/250 volt , AC single pole ISI marked complete all as specified and directed.

S&F in repair Decorative wall mounted LED batten warm/white colour fittings with all accessories, 1X18 Watt, extruded aluminium heat shrink type and provided for efficient heat dissipation and integrated electronic driver and fixed to wall with 2 Nos PVC block of suitable size complete all as specified and as directed. Make Havells Cat part No. LHEXBQP71N1W018 / CROMPTON Cat Part No. LCTL 18 CDL. / Philips cat part no. DX UJJWAL.

S&F in repair Decorative wall mounted LED batten warm/white colour fittings with all accessories, 1X 9 Watt, extruded aluminium heat shrink type and provided for efficient heat dissipation and integrated electronic driver and fixed to wall with 2 Nos PVC block of suitable size complete all as specified and as directed Make :- Crompton Cat part No. LCTL-9-CDL or Havells Cat part No. LHEXBQP7IN1W009 or equivalent make in Bajaj / Philips..

S & F in repair Wall bracket decorative LED Light fitting warm/white colour 8 watt complete with necessary connection including taking down old unserviceable one Make Philips cat Part No 37712/06 or equivalent make of Bajaj / Havells/CG.

Supply and fix and testing of storage type , electrically driven ,ISI Marked, water heater (Geyser) of capacity 25 litres, vertical type, wall mounted, BEE 5 star rating , AC, single phase including necessary fixing arrangements , electric and water connection complete all as specified and as directed. Make:- Havells Cat part no. GHWASEIB025 or equivalent make in Racold / Bajaj/LG .

S&F PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and as directed.

Supply and laying GI tubing light grade,15 mm bore with all GI fittings, fixed complete to walls and ceiling or laid in floor for cable crossing complete all as specified and as directed

S&F CP Bib tap 15 mm bore, fancy type, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed .

S&F CP angular Stop cock ,15 mm bore, chromium plated, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

Supply & fix in repair static electric energy meter (KWH) of accuracy class 1.0 AC Thrree phase, 3X 240 volts, 50 Hz of rating 10A-60A counter type LCD display with transparent hinge type box fixed on wooden / PVC board complete e all as specified & directed by Engr-in-Charge. Make : HPL / L&T / Legrand.

S&F in repair Exhaust fan 230 volts , 250 mm plastic body with louver , ventilator DX including making necessary cutting hole ( circular / rectangular) and grouting in wall 4 nos GI bolts to hold fan and making good to disturbed surfaces with cement sand mortar ( 1:4) with necessary colour wash / distemper to match with existing shade of wall including necessary electric connection and testing etc complete all as specified and as directed. Make:- Havells / orient / Bajaj / CG.

S&F in repair LED security building light LED 25 Watt, pressure die cast aluminium housing, heat resitant glass, IP65 protection, better optics for uniform distribution complete with all accessories internally prewired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete all as specified and directed. Make Bajaj Cat Part No-169821 LED/CG or equivalent model from make : Surya/Havells

S&F in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with necessary electrical connection complete all as specified and directed . Make: Havells Cat Part No-DHDPSHODRW12 or equivalent make of Legrand / Schneider /L&T

S&F in repair MCB DP, 240 Volt, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed .Make:- Havells cat part no.DHMCCDPF006-32 or equivalent model from make:- Schneider / Siemens / Legrand / L&T .

S&F in repair MCB SP, 240 Volt, 6-32 Amps fixed in DB's complete all as specified and directed .Make:- Havells/L&T/Legrand/Schneider

Material and labour for sub main wiring with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including PVC casing capping of suitable size complete all as specified and directed, including taking down unservicable one.(Note: two run of 6.0 sqmm cable , one run of earth wire of 6.0 sqmm and one run of PVC casing capping shall be measured as one length).Make- Cable- Finolex/RR kabel/Havells/KEI, PVC Casing Capping- Presto plast/Finolex/Kalinga.

S&F in repair MCCB DB 4 way sheet metal enclosure TPN 415 Volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting with one MCCB 100 AMps 4 Pole 25 KA as incommer complete all as specified and directed . Make:- Legrand / Schneider /L&T/Havells Note: MCB SP/TPN shall be measured and paid separately.Copper thimble shall be used for connection of cable.

Supply and fix MCCB ,TPN , 4P , 240 Volt, 40-63 Amps,10 kA , adjustable thermal & fixed magnetic setting complete all as specified and directed.

M&L for electrical Earthing complete with Galvanised steel earth plate elctrode of size 60 Cm X 60 Cm X 6.0 mm thick burried directly in ground vertically at a depth not less than 2.25 mtr below normal ground level, with top edge of earth plate at a depth not less than 1.5 mtr. below normal ground level , connected to galvanised earth lead wire 4.0mm dia by means of bolts, check nuts and washers, galvanised steel and protected by GI pipe 15mm bore light grade and connected to main switch board or control board all as specified and shown in MES schedule Electrical Plate No:-3 of SSR Part I, including excavation and earth work in any type of soil , concrete pit in PCC 1 :3 :6 type C1 , Precast RCC 1:2:4 type B1 cover slab 30cmx30cmx5cm with 10mm dia TMT bars 8 cm C/C both ways and one handle for lifting made out of 8mm dia TMT bar, funnel, wire mesh, 20mm bore galavanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternate layers and testing the Earth resistence and writing same on the chamber with synthetic enamel paint including taking down old unserviceable complete all as specified and as directed.

Supply and fix, Switch piano (ISI marked) Single pole 240 volts, flush type, one way 5 Amps complete all as specified and directed.

Supply and fix, bell push (ISI marked) Single pole 240 volts, 5 Amps complete all as specified and directed.

Supply and fix Socket (ISI marked), 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed.

Supply and fix Switch socket combination (ISI marked), 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and as directed.

Supply and fix MCCB ,TPN , 4P , 240 Volt, 100 Amps,10 kA , 10k rupturing capacity adjustable thermal & fixed magnetic setting complete all as specified and directed.

HAMZA CONSTRUCTION CO

M/s Kharsyntiew Industries

M/s J. C. CONSTRUCTION