Development of amenities at Basilica of Bom Jesus Old Goa Under Prasad SchemeConceptualizing, Designing SITC of facade illumination to the Monument Bom Jesus Basilica church with maintenance for a period of 5 years and SITC of parking lights

Amount

Monument Façade Illumination

Conceptualizing, Designing,Supply, Installation, Testing and Commisioning of LED Projector in RGBW With DMX Controller - High pressure die cast aluminium body, pre-treated before powder coating, single cable entry, stainless steel fasteners, durable silicon rubber gasket, high efficiency optical reflector with 5X20 degrees beam, clear toughened glass, integral control gear - 250W - WLL-T-MBM001-250WRGBW with Cylindrical, straight pre treated poles in galvanised steel, suitable for mounting upto 6 LED projectors - 6000mm high with mounting base, width span of 847mm, Depth - 620mm. Total height with lights - 9200mm - WLL/T/MBM002-9000.make: Ligman, IntilLED, La Lumiere,Viabizzuno, complete as required and directed by Engineer-Incharge.

Conceptualizing, Designing,Supply, Installation, Testing and Commisioning of 9M hot dip galvanised Octagonal pole having 70mm top dia. A/F, 155mm bottom dia. A/F, 3mm thick HT sheet, 260X260X16mm base plate along with suitable foundation bolts, including supply of bracket made of HDGI pipe suitable for fixing 6 nos flood lights over each poles Make Valmount, Mechanize engineering, hakke,Transail, RR Ispat as required and directed by engineer incharge as required and directed by engineer incharge.

Conceptualizing, Designing,Supply, Installation, Testing and Commisioning of LED - Die-cast aluminium end-caps- Extruded aluminium housing- Pre-treated before powder coating ensuring high corrosion resistance- Thermal heat dissipation body- Single or double head configuration for all three sizes One IP68 connector supplied with 0.2 m of 3x1.0 sqmm outdoor cable for KWH-50001, stainless steel fasteners in grade 304 with zinc flake coating (ZFC)- Durable silicone rubber gasket - High-efficiency PMMA lens- Clear toughened glass- Integral control gear- Hot-dipped galvanised steel mounting bracket allows for surface mounting - Single Head - KWH-50002-M-8030 - 37W - 1984 Lumens - Medium beam - IP65 -IK08 - L90-B10 , make: Ligman, IntilLED, La Lumiere,Viabizzuno,complete as required and directed by Engineer-Incharge.

Conceptualizing, Designing,Supply, Installation, Testing and Commisioning of LED - Die-cast aluminium end-caps - Extruded aluminium housing - Pre-treated before powder coating ensuring high corrosion resistance - Thermal heat dissipation body- Single or double head configuration for all three sizes One IP68 connector supplied with 0.2 m of 3x1.0 sqmm outdoor cable for KWH-50001, tainless steel fasteners in grade 304 with zinc flake coating (ZFC) - Durable silicone rubber gasket- High-efficiency PMMA lens - Clear toughened glass - Integral control gear - Hot-dipped galvanised steel mounting bracket allows for surface mounting - Double Head KWH-50012-M-8030 - 74W - Medium beam - IP65 - IK08 - L90-B10. make :Ligman, IntilLED, La Lumiere,Viabizzuno as required and directed by the engineer incharge

Conceptualizing, Designing,Supply, Installation, Testing and Commisioning of LED Surface Mounted Luminaire - Powder coated aluminium alloy housing- Adjustable aluminium extrusion bracket - Four IP67 connectors supplied with 2x0.2 m of 2x1.0 sqmm outdoor cable and 2x0.2 m of 2x0.5 sqmm outdoor shielded cable - Clear toughened glass - Uniform light distribution with uninterrupted end-to- end mounting.- 24 VDC input, DMX/RDM address with stable signal ALDO-30264- E-30 - 22W -RGBW30 - Asymmetric beam make: Ligman, IntilLED, La Lumiere,Viabizzuno,complete as required and directed by Engineer-Incharge

Conceptualizing, Designing,Supply, Installation, Testing and Commisioning of LED- Floodlight projector and Column - Die-cast aluminium housing- Pre-treated before powder coating ensuring high corrosion resistance- Single cable entry, through wiring upon request - One cable gland supplied with 2 m of 5x1.5 sqmm outdoor cable - Stainless steel fasteners in grade 304 with zinc flake coating (ZFC) - Durable silicone rubber gasket - High-efficiency optical reflector - Clear toughened glass- Integral control gear- Maximum wind load resistance is 140 km/h Odessa 21057 - 3X7LED - 135W - 12456 Lumens - 20 degrees - IP66 - IK08 - 5 Nos. on one pole make: Ligman, IntilLED, La Lumiere,Viabizzuno complete as required and directed by Engineer-Incharge.

Conceptualizing, Designing,Supply, Installation, Testing and Commisioning of LED MX Conrollers and all accessories including one-time programming charges controller suitable with make: Ligman, IntilLED, La Lumiere,viabizzuno complete as required and directed by Engineer-Incharge.

Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.(2) 3 Core 2.5 sq.m.

Supply, installation, testing and commisioning of Street Light Service Pillar made out of CRCA sheet with PU painted complete with TPN incoming and outgoing MCCBs, TP Contactors, Electonic/Digital / mechanical Timer, connectors etc. complete (Street light Pillar)

3 phase, 415V, 100A MCCB incoming; 12 nos. of 16 A, SP MCBs, Distribution Service Pillar suitable for outdoor installation made out of of CRCA sheet with PU painted complete with all accessories, HDGI mounting channels, clamps, ties, nut bolts etc. (12 way Distribution Service Pillar

Supply, installation, testing and commisioning of Cable Junction Boxes IP 66/69 “weather proof”, for outdoor installation (with knockouts for cable entry - Black colour ) cable size for incoming ranges from 16-50 sq.mm with Box Dimensions (LXBXH) (mm): 255 x 355 x 122 , Catalog No. with terminal: KF 5050 B make hensel

Supply, installation, testing and commisioning of Cable Junction Boxes IP 66/69 “weather proof”, for outdoor installation (with knockouts for cable entry - Black colour ) cable size for incoming ranges from 1.5-2.5 sq.mm with Box Dimensions (LXBXH) (mm):104 x 104 x 70, Catalog No. with terminal: KF 0402 B make hensel

Supply of 3 1/2 core armoured PVC insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I), IS:7098(Part II) with latest amendments of following size. (3) 3 1/2 Core 50 sq.mm

Supply of 4 core armoured PVC insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I), IS:7098(Part II) with latest amendments of following size. 4 Core 16 sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the xcavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer?Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required . (1) 3 x 1.5/2.5 Sq. mm complete as required and directed by Engineer-Incharge.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required and directed by Engineer-Incharge.

Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark,of approved brands, including accessories and providing masonry enclosure with CI/RCC cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement(plumbing will be paid seperately) complete as required and directed by Engineer-Incharge.

Providing and fixing 6 SWG dia GI wire on surface or in recess for loop arthing as require and directed by Engineer-Incharge.

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. (a) All types of Ordinary rock including all types of laterite rock, blasting prohibited

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete as require and directed by Engineer-Incharge.

providing & laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded granitic or basaltic stone aggrt. 20 mm nominal size) excluding cost of centering, shuttering and finishing in:

centering and shuttering including strutting, propping & removal of forms for Foundations, Footings, Bases for Columns

Providing and laying in position ready mixed concrete (RMC) High Performance Concrete per MORTH clause 1715 manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level M-20 grade of concrete.

Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

External Lighting/ Street Lights

Supply, installation, testing and commissioning of 3M height post top Pole Made of hot dip galvanised mild steel pipe sections 114mm dia. & 76mm dia. Arch. Base design starts with 322mm Dia. ring , radially tapers to 215mm for a height of 70mm, which is followed by a ring of 215mm dia,, then radially tapers to 135mm for a height of 115mm .Total weight of the base is 15 Kgs. & height of the base is 235mm . Ring-1(114mm/76mm, weight- 4kgs.) & Top Ring- (weight- 3kgs.) are made of cast iron. Entire pole & Bracket including all the cast iron elements shall be made to provide pleasing aesthetics as approved by Concerned Engineer in-charge. After Fabrication, Entire Pole is hot dip galvanized(60 microns Minimum ) for the effective corrosion resistance . The hot dip Galvanised pole should be provided with an inbuilt junction box to fix 32A connectors and 6A MCB, at the bottom - the inbuilt box should have a flush door of suitable size. The pole to be provide with suitable size base plate. This base plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed RCC foundation. wind pressure calculation as perof make : havells, suncity, reytek, dwarka casting , La lumirieIS 875(part-3) & structural calculation report as per EN40 should be submitted to verify the pole design. Pole & Cast iron parts are painted in 3 layer coating(coating thickness-100 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy primer & 3rd final layer with PU paint - customised colour Metallaic Grey. of make :havells, suncity, reytek, dwarka casting , La lumirie complete as required and directed by Engineer-Incharge.

Supply, installation, testing and commissioning of 40-45W Power Module LED, 3000K, -MOUNTED ON 3M HEIGHT POLE, :it's upper square frame made in die cast aluminum, auxiliary and optical compartment can be accessed by tilting the top frame,Bottom frame made in die cast aluminum with four-armed bracket with flange and a hole (Ø 28 mm) for attachment to the support. Screen made in polymethylmethacrylate (PMMA)molded in a single piece. Impact resistance: IK06. Pure polyester powder coating in Standard NERI Grey Colour. IP Rating - IP 66.Height – 605mm, Length - 325mm, Width - 325mm,Weight - 6Kg, Area Exposed to Wind(S) - 0.15 m2Power LED's Module (with CREE-XPG Series LED's - Individual LED's Minimum Luminous Flux (lm) is 130lm@ 350 mA (@ 85 °C) same should be supported by LED manufacturer's tech sheet) in compliance with IEC 62031(supporting type test report should be submitted), on Printed Circuit Board with metal core plate. Colour Rendering Index: Ra > 70. Electronic Power Supply for LED Module, which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection upto 1.5kv(an additional surge protection device of 10kV also provided in-built the fixture). Optics with refractive lens (Polycarbonate), UV Resistant & Shock Resistance IK10.LM80 Reported LED Lifetime is L90@ 50,000hours minimum.(same should be supported by LM 80 report from NVLAP accredited lab) & Estimated LED Lifetime is L80 @ 100,000 hours(Ta-25°C) minimum. of make: wipro, crompton, atilite, havells, reytek, leksa, la luminite. complete as required and directed by Engineer-Incharge.

Street Light Panel: Supply, Installation, testing and commissioning of LT panel IP- 67 outdoor type,floor mounted Panel, shall be suitable for 415 V, 3 phase, 4 wire, 50Hz Supply system. With 3 phase energy meter and 63A TPN MCB as incommer and 11 nos of 16 A TPN MCB as outgoing with 3 numbers of microcontoller based 25 A programmable digital Almac timer. As shown in SLD. complete as required and directed by Engineer-Incharge.

Supply of 4 core armoured PVC insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part II) with latest amendments of following size. (4) 4 Core 10sq.mm

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 35 sq.mm

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 50 sq.mm

Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. ' 3 Core 2.5 sq.mm

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (4) 4 x 10 Sq. mm.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (2) 3.5 x 35 Sq. mm.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (3) 3.5 x 50 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (1) 3 x 1.5/2.5 Sq. mm.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge, sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed lengthwise on top of cable all over the run and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. In soily strata

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. in soily strata

Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark,of approved brands, including accessories and providing masonry enclosure with CI/RCC cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs. d) Refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g) watering arrangement '(a) In soily strata

Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for coneections etc. as required

Providing and fixing 6 SWG dia GI wire on surface or in recess for loop arthing . as required

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (a) SP, Cat A

Supplying, of HDPE pipes at store or site of work including loading & unloading stacking, transit insurance etc. Complete conforming to IS: 4984 - 1995 and made from PE 100 resin Class IV (16kg/cm2). 'Outer dia. in mm - 63 mm

Conveying carefully from stack at site, 250m from both sides rolling and lowering in trenches, laying true to line and level and perfect linking for joints for P.V.C / H.D.P.E complete in all respects as per the direction of the engineer in-charge 'Outer dia. in mm - 63 mm.

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. All kinds of soil

Centering and shuttering including strutting, propping etc. and removal of formwork for Foundations, footings, bases for columns and mass concrete.

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: All works upto plinth level

Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) All works upto plinth level

Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Laying and fixing with collars light duty non-pressure NP 2 class R.C.C. pipes with cement mortar in proportion 1:2 (1 cement : 2 fine sand) in joints including cost of jointing material etc. complete. 300 mm dia pipe.

Power & Instrumentation (Gujarat) Limited