Construction of Children Park and open Gym at Nagri Kathua under Capex Budget.

Amount

Clearing jungle including uprooting of rank vegetation grass, bushwood, trees and saplings of girth upto 30 cm measured at height of 1m above ground level and removal of rubbish outside the periphery of the area cleared including all leads & lifts.

Earth work excavation in all kind of soil by manual means in trenches for foundations, drains, pipes, cables etc. ( Not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5m incl. disposal/filling of excavated earth all leads & lifts complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)incl. all leads, lifts & carriage of material by MT/ H.L.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) including all leads, lifts & carriage of material by MT / H.L.

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth including all shapes, leads, lifts and carriage of material by MT / H.L. in cement mortar 1:6 ( 1 cement : 6 coarse sand)

Centring and shuttering including strutting propping etc and removal of form work Foundations, footings, bases of columns etc. for mass concrete

Supplying and filing of good earth at site including watering, rolling, royalty and carriages by MT/HL .

12 mm cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand) including all leads, lifts and carriage of material by M.T / H.L.

Steel work welded in built up sections/framed work, incl. cutting,hoisting, fixing in position & applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates & similar works.

Supplying and laying including digging, carrying by lorry, filling River Bed Material including watering & consolidation in layers to specified lines, camber, grades and cross sections. Finished work incl. material , labour all leads , lifts and carriage of material by MT/HL.

Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete

Supplying & fixing opf See Saw should be conforming top EN 1176-6:2008 for safety requirements for free height of fall.2. Ergonomically designed Rotational Molded seat should be 300 mililetters x 190 milimetresx70 milimetres.3.See Saw Lever should be made from from 80 NB Galvanized Pipe conforming standrads IS 1239 with strong load carrying capacoty.4. See Saw should ne with special Nylon-6 bush enclosed in a seamless pipe hinged to 50 NB Supoort pipe.The Stand is fixed with ISA for strong foundation grip.5.The roto products should be manufactured using material LLDPE( linear Low Density Polythylene) of Grade-36RA045 ( Food Grade Plastic) with denesity 963 kg/m3.The material is added with antioxidant & 12 % UV for protecting the product from Color fading. The material is tested with weatherability test, carbon test, M.F.L.( Melt Flow Index) , test, Fatigue Test.The mold is fixed to three arm bi-axial rotational machine and kept in the ovenfor about 20 minutes up to temperature of 180-210 degrees,The overall product obtain is a seam-less to ensure perfect blend of uniorm thickness and durability.FOUNDATION AND INSTALLATION;the equipmnt is rtequired to be fixed in open ground which ay include excavation of earth and suitabnle concrete foundation to bear the load of the equipmenmts with the children.Besides adjoining area has to be filled with sand to prevent the children from getting hurt.The filling of the sand shold be minimum of 6 inches.Work has to be completed as per direction of the engineerin charge and specfied notes.

Supplying and fixing 80NB Pipe bended & welded together to form a strong frame to withstand both the pitching & yawing moment. The with a flange & ISA 80NB pipe is hot dip galvanized pipe of height 2900mm conforming to IS 1239 with GI thickness of 60µ. 2. 50NB Top Pipe with two Arc Swing Flanges welded at both its ends. Pipe can withstanding torsional stress created due to swinging motion. These 50NB top pipes (2 nos. for two seater Arc Swing) are hot dip galvanized pipe of length 2950mm conforming to IS 1239 with GI thickness of 60µ. 3. Special swing clamps made up of two parts are joined together with M6 Allen bolts along with S-Hook & a specially designed swing pin The S-Hook is specially designed to house a bearing for smooth & noiseless swinging. The clamps are made from injection molded Nylon-6 plastic. FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipments with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes

Supplying and fixing miltiplay station Area: 8m x 9m ,Safe Area: 9m x 11m 1. Sq., Deck 5’ ht: 1. The platform should be made up of Fiber Reinforced Plastic with anti-skid surface with thickness of 4-5 mm. The top canopy is made of Fiber Reinforced Plastic with a minimum thickness of 2-3 mm. Roto flag is attached on top. 2. Square Deck 3’ ht with Canopy:The platform should be made up of Fiber Reinforced Plastic with anti-skid surface with thickness of 4-5 mm. The top canopy is made of Fiber Reinforced Plastic with a minimum thickness of 2-3 mm. Roto flag is attached on top. 3. Bowl Slide 3’ ht: The bowl slide chute should be made up of fiber glass reinforced plastic (FRP) molded one and is of attractive color & shade. The design of FRP bowl slide has minimum permissible joints suitable for children such that child does not fall down while sliding down. The FRP slide is 3-4 mm thick. There is a suitable handgrip on the side of the Slide. The landing support is made up of 25 NB GI pipes. The slide entry is also made of LLDPE in Rotational molding process. 4.FRP Bridge 8’ Long: The FRP Bridge should be made from Fiber Reinforced Plastic of 4-5 mm thickness. It has railing made from Rotational molding process with support of 20 NB GI pipes. 5. FRP Tunnel 6’ Long: The tunnel should be a pipe shaped module of specific dia made from Fiber Reinforced Plastic of 3-4 mm thickness. 6. Swinging Bridge 8’ Long : The swinging bridge is made of rotational molded planks and is suspended with galvanized chains. The frame is of 80NB pipes with railing made from LLDPE & is supported by 20NB GI pipes. 7. Spiral Slide 5’ height: Spiral slide chute is made of fiber reinforced plastic having shell thickness of 4-5 mm. The slide is supported on 80 NB GI pipe. The landing module is supported by 20 NB pipe. The railing is made up of LLDPE in Rotational molding process. It is support by 20 NB GI pipe. 8. FRP Ladder: The ladder is made up of FRP with a thickness of 3-4mm. The top surface of the ladder should be such that it should not deserve any kind of skiddy movement. 9. Rock Climber 5’ ht: The rock climber is made up of Fiber Reinforced Plastic (FRP). The rocks are molded on same platform. The climber is supported by 25 NB pipe at the bottom for ground support.10. Wave Slide 5’ ht: The Wave Slide chute is made up of 4-5 mm thick of Fiber Reinforced Plastic. The wave shape is given in such a manner that it will not give any jerk or bump to the rider. Rotational molded slide entry is provided at top of the slide. The chute has its end such as it causes safe landing of the child. The landing portion is horizontal with respect to the ground. The supports provided are made up of 25 NB GI pipe.

Supplying and fixing of Leg Press shall consist of 80 NB G.I. pipes with two suitably designed brackets attached on it. Brackets have to be made of M.S. material with G.I. plating. The moving frame of Leg Press is to be made of 40NB G.I. pipes which is to be mounted to the main frame with the help of suitably designed, machined shaft and bearing housing. Bearings used are to be of oil sealed, self-lubricating. Make of bearing shall be as per approved make list. Foot rest is to be hinged to the main frame with the help of suitably designed G.I. plated clamp and 25 NB G.I. pipes. Gusset plates have to be provided to give extra strength to foot rest. Foot rest is too made of high quality HDPE material. Suitably designed HDPE pads has to be provided at the bottom of moving frame. Seat and back rest provided has to be made of HDPE. All pipes are to be uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe is to be close by GI / HDPE caps for user safety against entrapment.

Supplying and fixing triple twister SPECIFICATIONS: Main pipe Dia-127mm., Thickness-3mm Base plate Dia-200mm., Thickness-10mm. Powder coating SIZE: 1775*X1775*X1475*mm

Supplying and fixing Section FRP channel strip of thickness upto 5mm and 1200mm long with wooden finish bolted to both the side frames. The Bench strip consists of nylon end caps provided at the two ends of strips for covering the ends. 2. Designer VIP Bench frame made from sand casting method. FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipments with the seaters. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes.

Supplying and fixing 3-level chin-up Application/Usage Only For Outdoor Use Automation Grade Manual Dimension 3500 X 200 X 2500 mm Material GI, Mild Steel Customisation Customised Condition New Model No. RE005 Brand REPLAY Usage Open Air Gym , Indoor Gym MAX USER WEIGHT 110 KG

Supplying and fixing outdoor cycle Material Mild Steel, GI Customisation Customised Dimension 900 X 610 X 1350 mm Condition New Is It Portable Non Portable Usage/Application ONLY FOR OUTDOOR USE Model No. RE030 MAX USER WEIGHT 110 KG

Supplying and fixing outoor abs shaper Material Mild Steel, GI Customisation Customised Condition New Dimension 2150 X 450 X 800 mm Is It Portable Non Portable Usage/Application OUTDOOR USE ONLY Model Number RE027 MAX USER WEIGHT 110 KG

Providing and fixing sign board (Iron Made ) ( sheet size 0.90 mtr x 0.60 mtr) with both legs embedded in cement concrete block incl. painting and writing & all leads, lifts and carriages of material by MT/HL

M/S SUNIL KUMAR SHARMA

Amit Sharma Contractor

Arun Dev SINGH

M/S PARSHOTAM KUMAR

RAHUL SHARMA GOVT CONTRACTOR