8973/GWL/E8 REPAIR/MAINT OF CERTAIN WOODEN FURNITURE ARTICLES AT GE GWALIOR

Amount

TABLE BED SIDE : FD-28, FD- 210, FD- 248, FD-276 S&F following components of table including dismantling taking out carefully & renewal of old components with new components of table complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

Removing of old U/S top from table bedside and S&F new top made out of 18mm thick commercial plywood BWR grade ISI marked duly pasted with 1mm thick sunmica sheet in colour/shade as approved by GE with 4mm thick half round teak wood beading all-around complete all as shown on drg, specified and directed.

M&L for renewal of side of table bed side with S&F new sides with 18mm thick commercial plywood BWR grade ISI marked duly pasted with 1mm thick sunmica sheet in colour/shade as approved by GE with 4 mm thick teakwood beading complete all as specified and directed.

S&F in renewal of shelf & bottom 8 mm thick commercial plywood BWR grade ISI marked duly pasted with 1mm thick sunmica sheet n colour/shade as approved by GE with teak wood 4 mm thick half round beading complete all as specified and directed.

S&F in renewal of back plywood of table bed side 6 mm thick commercial plywood BWR grade ISI marked complete all as shown on drg, specified and directed.

M&L for Polishing one coat to old surfaces to table bed side with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

M&L for Polishing two coats to new surfaces to table bed side with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

PEG TABLE : FD-25(M), FD-236, FD-277, FD-384 S&F following components of table including dismantling taking out carefully & renewal of old components with new components of table complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

M&L for renewal of old existing broken table top of any description with new table top of 18/19 mm thick commercial plywood exterior grade ISI marked duly pasted 1mm thick sunmica sheet of approved colour with 4 mm thick half round teakwood beading all around complete all as specified and directed.

S&F in renewal of leg of peg table teak wood made to shape complete all as shown on drg, specified and directed.

S&F in renewal of long rail of peg table, teak wood made to shape complete all as shown on drg, specified and directed.

S&F in renewal of short rails, teak wood made to shape complete all as shown on drg, specified and directed.

S&F in renewal of hard PVC/rubber shoe/ ring of superior quality fixed with suitable screws complete all as shown on drg, specified and directed.

M&L Polishing one coat to old surfaces to peg table with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

M&L Polishing two coats to new surfaces to peg table with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

TABLE CENTER : FD-29(M), FD-235, FD-274 S & F following components of table including dismantling taking out carefully & renewal of old components with new components of table complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

M&L renewal of old existing broken table top of any description with new table top of 18/19 mm thick commercial plywood exterior grade ISI marked duly pasted with 1 mm thick sunmica sheet, colour/shade as approved by GE with 4 mm thick teakwood beading all around complete all as specified and directed.

S&F in renewal of leg of table centre, teak wood made to shape complete all as shown on drg, specified and directed.

S&F in renewal of long rail of table centre, teak wood made to shape complete all as shown on drg, specified and directed.

S&F in renewal of short rails of table centre, teak wood made to shape complete all as shown on drg, specified and directed.

S&F in renewal of stiffener of table centre, teak wood made to shape complete all as shown on drg, specified and directed.

S&F in renewal of hard PVC/rubber shoe/ ring of superior quality with suitable screws for fixing complete all as specified and directed.

M&L Polishing one coat to old surfaces to table center with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

M&L Polishing two coats to new surfaces to table center with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

TEAPOY : FD-34(M), FD-232, FD-278, FD-382 S & F following components of table including dismantling taking out carefully & renewal old components with new components of teapoy complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

M&L for renewal of old existing broken table top of any description with new table top of 18/19 mm thick plywood exterior grade ISI marked duly pasted 1mm thick laminate sunmica sheet, colour/shade as approved by GE with 4 mm thick teakwood half round beading all around all as shown on drg, specified and directed.

S&F in renewal of leg teak wood made to shape all as shown on drg, specified and directed.

S&F in renewal of long rail, teak wood made to shape all as shown on drg, specified and directed.

S&F in renewal of short rails, teak wood made to shape, all as shown on drg, specified and directed.

S&F in renewal of stiffener, teak wood made to shape all as shown on drg, specified and directed.

S&F in renewal of hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as specified and directed.

M&L Polishing one coat to old surfaces to teapoy with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

M&L Polishing two coats to new surfaces to teapoy with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

TABLE DRESSING GENTS : FD-31(M), FD-230, FD-379 S&F following components of table including dismantling taking out carefully & renewal of old components with new components of table dressing table complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

M&L for renewal of old existing broken top of table dressing gents of any description with new top of 12 mm thick commercial plywood BWR grade ISI marked duly duly pasted with 1mm thick laminate sunmica sheet in colour/shade as approved by GE with and including 3mm thick teak wood beading alround made to shape, fixed in position complete all as specified and directed.

M&L for renewal of side with new side of 12mm thick commercial plywood BWR grade ISI marked duly pasted with 1mm thick laminate sunmica sheet in colour/shade as approved by GE including 3mm thick teak wood beading alround, made to shape, fixed in position complete all as specified and directed.

M&L for renewal of bottom with new 12mm thick commercial plywood, BWR grade ISI marked duly fixed with 1mm thick sunmica sheet made to shape fixed in position complete all as specified and directed.

S&F in renewal of drawer made to shape fixed in position to run smoothly all as shown in drg and directed.

S&F in renewal of back frame made of 6mm thick commercial plywood BWR grade ISI marked made to shape fixed in position all as shown in drg and directed.

S&F in renewal of knob chromium plated 25mm dia, 24mm length as approved by the GE of best quality complete all as specified and directed.

S&F in renewal of mirror 5.5mm thick of size 380mm x 760mm made to shape, fixed in position, complete all as shown on drg, specified and directed.

M&L Polishing one coat to old surfaces to table dressing gents with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

M&L Polishing two coats to new surfaces to table dressing gents with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

TABLE DRESSING LADIES WITH MIRROR : FD-32, FD-251 S&F following components of table dressing including dismantling taking out carefully & renewal of old components with new components of table dressing complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

M&L for renewal of knob with new chromium plated knob 25mm dia, 24mm length as approved by the GE best quality complete all as specified and directed.

M&L for renewal of legs of table dressing ladies with new legs of Ist class Hard Wood(MP teak wood) made to shape complete all as specified and directed.

M&L for renewal of back of mirror made of 6mm thick commercial plywood BWR grade ISI marked complete all as specified and directed.

M&L for renewal of stiffener between legs made of teakwood made to shape complete all as shown on drg, specified and directed.

M&L for renewal of broken top of table dressing ladies of any description with new top made of 18 mm thick commercial plywood BWR grade ISI marked duly pasted with 1mm thick sunmica sheet, made to shape, fixed in position complete all as shown on drg, specified and directed.

M&L for renewal of side of table dressing ladies with S&F new side of table dressing ladies with teak wood veneered one side & commercial on other side complete all as shown on drg, specified and directed.

M&L in renewal of bottom made of commercial plywood with teak (veneered one side) commercial other side) complete all as shown on drg, specified and directed.

S&F in renewal of drawer of table dressing ladies complete all as shown on drg, specified and directed.

S&F in renewal of side long rail jointed to leg of table dressing ladies made of Ist class Hard wood (MP teak wood) complete all as shown on drg, specified and directed.

S&F in renewal of short rail of table dressing ladies made of Ist class hardwood (MP teak wood) complete all as shown on drg, specified and directed.

S&F in renewal of back of table dressing ladies made of plywood with teak wood veneered one side & commercial on other side complete all as shown on drg, specified and directed.

Removing old broken sliding glass from table dressing ladies and S & F new 5.5mm thick sheet glass with plastic handle as per sample, shape and size shown in drawing complete all as specified and directed.

Removing of broken looking mirror from table dressing ladies and S & F new looking mirror of size 1220 x 366 x 5.5mm thick made to shape fixed in position, all as shown on drg, specified and directed

M&L Polishing one coat to old surfaces to table dressing ladies with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

M&L Polishing two coats to new surfaces to table dressing ladies with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

TABLE DINING FOR 6/4 PERSONS : FD/MAP-II/03 S&F following components of table including dismantling taking out carefully & renewal of old components with new components of table complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

M&L for renewal of old existing broken table top of 6 persons of any description with S&F new table top of 18/19 mm thick plywood BWR grade ISI marked duly pated with 1mm thick laminate sunmica sheet, colour/shade as approved by GE with 4 mm thick teakwood half round beading all around complete all as specified and directed.

All as per Srl item No. 7.01 here-in-before but top of table dining 4 persons.

S&F in renewal of L-Shape wooden corner of size 4" x 4" x 1" to the Table between legs and rail to be fixed with screw complete all as specified and directed.

S&F in renewal of leg, teak wood made to shape complete all as shown on drg, specified and directed.

S&F in renewal of long rail of table dining 6 Persons, teak wood made to shape complete all as shown on drg, specified and directed.

S&F in renewal of long rail of table dining 4 Persons, teak wood made to shape complete all as shown on drg, specified and directed.

S&F in renewal of short rails, teak wood made to shape complete all as shown on drg, specified and directed.

S & F in renewal of Nylon Buffer of superior quality with suitable screws for fixing complete all as specified and directed.

M&L Polishing one coat to old surfaces to table dining 6 persons with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

All as per Srl item No. 7.09 here-in-before but table dining 4 persons.

M&L Polishing two coats to new surfaces to table dining 6 persons with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

All as per Srl item No. 7.11 here-in-before but table dining 4 persons.

TABLE DINING 6/8 PERSONS : FD-30, FD-239, FD-273, FD-376, FD-1115 S&F following components of table including dismantling taking out carefully & renwal of old components with new components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

M&L for renewal of old existing broken table top of table dining 8 persons, of any description with S&F new table top of 18/19 mm thick plywood BWR exterior grade ISI marked duly pasted 1mm thick laminate sunmica sheet, colour/shade as approved by GE with 4 mm thick teakwood half round beading all around complete all as specified and directed.

All as per item 8.01 here in but top of table dining 6 persons

S&F in renewal of Leg, teak wood made to shape complete all as shown on drg, specified and directed.

S&F in renewal of long rails of table 8 person, teak wood made to shape complete all as shown on drg, specified and directed.

S&F in renewal of short rails teak wood made to shape complete all as shown on drg, specified and directed.

S&F in renewal of stiffener under the top joining the top long side of top rails of table dining teak wood made to shape complete all as shown on drg, specified and directed.

S&F in renewal of long rail of table 6 person, teak wood made to shape complete all as shown on drg, specified and directed.

S&F in renewal of L-Shape wooden corner of suitable size to the Table between legs and rail to be fixed with screw complete all as shown on drg, specified and directed.

S&F in renewal of hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed.

M&L Polishing one coat to old surfaces to table dining 8 persons with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

All as per item No 8.10 here in but top of table dining 6 persons.

M&L Polishing two coats to new surfaces to table dining 8 persons with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

All as per item No 8.12 here in but top of table dining 6 persons.

TABLE 900 MM X 600 MM OR (3' x 2') (WOODEN) W/O DRAWER : FD-42, FD-55, FD-223, FD-231, FD-284 S&F following components of table including dismantling taking out carefully & renewal of old components with new components of table complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

M&L for renewal of old existing broken table top of any description with new table top of 18/19 mm thick plywood BWR exterior grade ISI marked duly pasted with 1mm thick laminate sunmica sheet, colour/shade as approved by GE with 4 mm thick teakwood half round beading all around complete all as specified and directed.

S&F in renewal of legs of table made out of Ist class HW (teak wood) all as shown on drg, specified and directed.

S&F in renewal of table frame's long rail made out of Ist class HW (teak wood), made to shape all as shown on drg, specified and directed.

S & F in renewal of Stiffener, teakwood made to shape complete all as shown on drg, specified and directed..

S&F in renewal of table frame's short rail, made out of Ist class HW (teak wood) made to shape complete all as shown on drg, specified and directed.

S&F in renewal of rubber shoe fixed with steel screw of superior quality all as shown on drg, specified and directed.

S&F in renewal of rectangutar bracket 08 Nos, made of Ist class hard wood (teakwood) of size 100 mm x 100 mm x 25mm fixed with steel screws of suitable size all as shown on drg, specified and directed.

M&L Polishing one coat to old surfaces to table 3'x2' with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

M&L Polishing two coats to new surfaces to table 3'x2' with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

TABLE 900 MM X 600 MM WITH DRAWER (3' x 2') (WOODEN) : FD-41, FD-224, FD-283 S&F following components of table including dismantling taking out carefully & renewal of old components with new components of table complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

M&L for renewal of old existing broken table top of any description with new table top of 18/19 mm thick plywood BWR exterior grade ISI marked pasted with 1 mm thick laminate sunmica sheet, colour/shade as approved by GE with 4 mm thick teakwood half round beading all around complete all as specified and directed.

S&F in renewal of legs of table, Ist class hard wood (teak wood) made to shape complete all as shown on drg, specified and directed.

S&F in renewal of table frame's long rail, Ist class hard wood (teak wood) made to shape complete all as shown on drg, specified and directed.

M&L for renewal of unserviceable drawer of same size and shape to Table. Front of the drawer shall be made out of 18/19 mm thick plywood BWR exterior grade ISI marked pasted with 1 mm thick laminate sunmica sheet in colour/shade as approved by GE and including wooden knob. Sides, base and back of drawer made out of 12mm thick ply wood BWR grade ISI marked and fixed complete all as shown on drg, specified and directed.

S & F in renewal of Stiffener, Ist class hard wood (teak wood) made to shape complete all as shown on drg, specified and directed.

S & F in renewal of rectangutar bracket Ist class hard wood (teakwood) 08 Nos of size 100 mm x 100 mm x 25mm fixed with steel screws complete all as shown on drg, specified and directed.

M&L renewal of rubber shoe with new Nylon Buffer of superior quality fixed with steel screws complete all as shown on drg, specified and directed.

M&L Polishing one coat to old surfaces to table 3'x2' with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

M&L Polishing two coats to new surfaces to table 3'x2' with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

CHAIR DINING (JCO/ORS) : FD/MAP-II/05 S & F following components of chair including dismantling taking out carefully & renewal of old components with new components of chair complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

S&F in renewal of front leg of Chair dining made out of Ist class hard wood teak made to shape acomplete all as shown on drg, specified and directed.

All as per Item Srl No. 11.01 here-in-before but rear leg of chair dining.

All as per Item Srl No. 11.01 here-in-before but front/ back/ side rail of chair dining.

All as perItem Srl No. 11.01 here-in-before but back rest (i.e. horizontal wooden members for back rest of size 45mm x 35mm ) of chair dining.

All as per Item Srl No. 11.01 here-in-before but stiffener between front leg to rear leg of chair dining.

All as per Item Srl No. 11.01 here-in-before but stiffener for jointing to side stiffener of chair dining.

Removing of old U/S/broken PVC seat from chair dining and S & F new PVC seat 4mm thick in single piece complete all as shown on drg, specified and directed.

S&F in renewal of Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed.

M&L Polishing one coat to old surfaces to chair dining with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

M&L Polishing two coats to new surfaces to chair dining with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

DRESSING TABLE (LADIES) INCLUDING STOOL FD/MAP-II/07 S&F following components of table dressing including dismantling taking out carefully & renewal of old components with new components of table dressing complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

M&L for renewal of handle with new chromium plated handle as approved by the GE of best quality complete all as specified and directed.

M&L for renewal of unserviceable sliding channel complete all as specified and directed.

M&L for renewal ofal of of unserviceable 6mm thick back plywood of mirror, commercial plywood BWR ISI marked complete all as specified and directed.

M&L for renewal of back of table dressing ladies with new back of table dressing ladies with teak wood veneered one side & commercial on other side complete all as specified and directed.

M&L for renewal of broken top of table dressing ladies of any description with new top table dressing ladies of 18 mm thick commercial plywood BWR exterior grade duly pasted with 1mm thick sunmica sheet, fixed in position complete all as specified and directed.

M&L for renewal of side of table dressing ladies with new side of table dressing ladies with teak wood veneered one side & commercial on other side complete all as specified and directed.

M&L for renewal of door shutter of table dressing ladies with new door shutter complete all as shown on drg, specified and directed.

M&L for renewal of drawer of table dressing ladies with new drawer complete all as shown on drg, specified and directed.

M&L for renewal of wheels of table dressing ladies with new wheels complete all as shown on drg, specified and directed.

M&L for renewal of hinges of table dressing ladies with new hinges complete all as shown on drg, specified and directed.

M&L for renewal of magnetic catcher of table dressing ladies with new magnetic catcher complete all as shown on drg, specified and directed.

M&L for renewal of cushion of Stool dressing with PU foam cushion with 40 Density with Tapestry cloth as approved by GE of rate not less than Rs 300/RM complete all as specified and directed.

Removing of old U/S looking mirror from table dressing ladies and S & F new looking mirror 5mm thick made to shape fixed in position, all as shown on drg, specified and directed.

M&L Polishing one coat to old surfaces to table dressing ladies with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

M&L Polishing two coats to new surfaces to table dressing ladies with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

BED PLY WOOD TOP (HARD BED) : FD-246 S&F following components of bed including dismantling taking out carefully & renewal of old components with new components of bed complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

Dismantling, taking out carefully old existing ply wood of any description and renewal of the same with S&F new ply wood 12mm thick commercial, BWR exterior grade of size (as shown on drg) fixed with steel screws made to shape fixed in position complete all as shown on drg, specified and directed.

M&L for renewal of plywood on both side of head rest frame with new 3.5mm thick plywood duly pasted with 1mm thick sunmica sheet including teak wood beading plain for head rest alround and Half cut round beading front side and other side complete as per drg, beading made to shape fixed in position complete all as shown on drg specified and directed.

M&L for renewal of leg of head rest with S&F new Ist class HW (teak wood) leg made to shape fixed in position complete all as shown on drg specified and directed.

S&F in renewal of foot rest of plywood 3.5mm thick duly pasted with 1mm thick sunmica sheet, one side teak, and plain beading and half cut round beading fixed in position complete all as shown on drg, specificed and directed.

M&L for renewal of leg of foot rest with new Ist class HW (teak wood) leg made to shape fixed in position complete all as shown on drg specified and directed.

M&L renewal of long rail with new Ist class HW (teak wood) long rail made to shape fixed in position complete all as shown on drg specified and directed.

M&L renewal of short rail with new Ist class HW (teak wood) short rail made to shape fixed in position complete all as shown on drg specified and directed.

M&L renewal of stiffener with new Ist class HW (teak wood) stiffener made to shape fixed in position complete all as shown on drg specified and directed.

M&L for renewal of mild steel bracket with new mild steel bracket made out of 40mm x 40mm x 6mm flat iron, made to shape fixed in position complete all as shown on drg specified and directed .

M&L Polishing one coat to old surfaces to Bed ply with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

M&L Polishing two coats to new surfaces to Bed ply with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

TABLE WRITING : FD-33, FD-249, FD-275 S&F following components of table including dismantling taking out carefully & renewal of old components with new components of table complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

M&L for renewal of old existing broken table top of any description and S&F new table top of 18/19 mm thick plywood BWR exterior grade ISI marked duly pasted with 1mm thick laminate sunmica sheet, colour/shade as approved by GE with 4 mm thick teakwood beading all around complete all as specified and directed.

M&L for renewal of shutters (complete) and S & F 18 mm thick plywood commercial BWR exterior grade (Grade I, Type-II) ISI marked duly pasted with 1mm thick laminate sunmica sheet in colour/shade as approved by EIC/GE including lock & keys complete all as shown on drgs, specified and directed.

M&L for renewal of TOP long rails with new TOP long rail made out of Ist class Hard Wood (teak wood) complete all as shown on drgs, specified and directed.

M&L for renewal of TOP short rail with S&F new TOP short rail of made out of Ist class Hard Wood (teak wood) complete as shown on drgs, specified and directed.

M&L for renewal of drawer with wooden knob 40mm dia and S&F complete new drawer made out of Ist class hard wood (teak wood) with knob brass Chromium plated 40mm dia as approved by GE complete all as shown on drgs, specified and directed.

M&L for renewal of Leg with new Leg with made out Ist class MP (teak wood) complete all as shown on drgs, and directed.

M&L for renewal of bottom centre stiffener with new bottom centre stiffener made out of Ist class Hard Wood (teak wood) complete all as shown on drgs, specified and directed .

M&L for renewal of bottom side stiffener with new bottom side stiffener made out of Ist class Hard Wood (teak wood) complete all as shown on drgs, specified and directed.

M&L for renewal of rubber shoe with screw(steel) with new Nylon Buffer of superior qulaity fixed with screws (steel) of suitable size ccomplete all as shown on drg, specified and directed.

M&L Polishing one coat to old surfaces to Table writing with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

M&L Polishing two coats to new surfaces to Table writing with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

M&L for renewal of complete set of section B box seperated with partition and S&F new box as per drawing. Plywood duly pasted with sunmica sheet shall be fixed on exposed surfaces and rest all as per drawing and as directed

SIDE BOARD : FD-26(M), FD-241, FD-371, FD-1112 S & F following components of side board including dismantling taking out carefully & renewal of old components with new components of side board. Complete all as shown on drg, specified and directed by the Engineer-in-Charge :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

Removing of old unserviceable top from Side board and S & F new top made out of 18 mm thick plywood commercial BWR exterior grade ISI marked duly pasted with 1mm thick laminate sunmica in colour/shade as approved by GE with 4mm thick teak wood beading all-around the top of side board complete all as shown on drg, specified and directed.

M&L for renewal of bottom with new bottom complete all as shown on drg, specified and directed.

M&L for renewal of side with new side complete all as shown on drg, specified and directed.

M&L for renewal of shelf with 12mm thick plywood commercial BWR exterior grade (Grade I, Type-II) ISI marked duly pasted with 1mm thick sunmica laminate in colour/shade as approved by GE complete all as shown on drg, specified and directed.

M&L for renewal of partition complete all as shown on drg, specified and directed.

M&L for renewal of back ply with new 6mm thick plywood commercial both side Grade I (with BWR Resin) complete all as shown on drg, specified and directed.

M&L for renewal of Bottom long Stiffner with new M.P. Teak Wood Stiffner complete all as shown on drg, specified and directed.

M&L for renewal of Bottom short Stiffner with new M.P. Teak Wood Stiffner complete all as shown on drg, specified and directed.

M&L for renewal of Legs with new M.P Teak Wood Legs complete all as shown on drg, specified and directed.

M&L for renewal of knobs with new 25 mm dia brass CP complete all as specified and directed.

M&L for renewal of locks with new locks brass complete all as specified and directed.

M&L for renewal of complete drawers with new complete drawers (as per shown on drg) made of 1st class teak wood complete all as shown on drg, specified and directed.

M&L for renewal of Piano type hinges with new Piano type hinges light weight complete all as specified and directed.

M&L Polishing one coat to old surfaces to side board with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

M&L Polishing two coats to new surfaces to side board with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

BOOK CASE : FD-45(M), FD-237, FD-355 S&F following components of book case including dismantling taking out carefully & replace old components with new components of book case. Complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

Removing of existing U/S shutter and S & F of new shutters of 18 mm thick Plywood BWR exterior grade ISI marked duly pasted with 0.6 mm thick laminate sunmica in colour/shade as approved by GE with 3 mm thick teak wood beading on three side of shutters complete all as specified and directed.

Removing of existing U/S back and S & F of new back of 6 mm thick plywood BWR grade commercial type complete all as specified and directed.

Removing of existing U/S leg and S & F of new leg of teak wood duly planned and finish complete all as specified and directed.

Removing of existing U/S long rail and S & F of new long rail of teak wood duly planned and finish complete all as specified and directed.

Removing of existing U/S side & partition and S & F side & partition 18 mm thick plywood commercial BWR exterior grade ISI marked duly pasted with 0.6 mm thick laminate sunmica in colour/shade as approved by GE with 3 mm thick teakwood beading on front edge of the shelf with nails complete all as specified and directed.

Removing of existing U/S shelve and S & F of new shelve of 18 mm thick plywood BWR exterior grade ISI marked duly pasted with 0.6 mm thick sunmica in colour/shade as approved by GE with 3 mm thick teak wood beading on front edge of the shelf with nails complete all as specified and directed.

Removing of existing U/S MS hinges and S & F of Piano type ISI marked hinges complete all as specified and directed.

Removing of existing U/S top & bottom and S & F top & bottom with plywood BWR exterior grade ISI marked duly pasted with 0.6 mm thick sunmica in colour/shade as approved by GE complete all as specified and directed.

Removing of existing U/S knob and S & F new CP Barss knob fixed with steel screw complete all as specified and directed.

M&L Polishing one coat to old surfaces to book case with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

M&L Polishing two coats to new surfaces to book case with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

HAT STAND WITH MIRROR : FD-23(M), FD-233, FD-361 S&F following components of hat stand including dismantling taking out carefully & renewal of old components with new components of hat stand complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

M&L for renewal of Base made of 18/19 mm thick PLywood BWR exterior grade ISI marked duly pasted with 0.6 mm thick sunmica sheet in colour/shade as approved by GE with 6 mm thick teak wood beading around side in requied shape and size complete all as shown on drg, specified and directed.

S&F in renewal of Brass pegs with screws, size and shape complete all as shown on drg, specified and directed.

S&F in renewal of Teak wood beading, shape & size complete all as shown on drg, specified and directed.

S&F in renewal of Mirror 5.5 mm thick size complete all as shown on drg, specified and directed.

M&L Polishing one coat to old surfaces to hat stand with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

M&L Polishing two coats to new surfaces to hat stand with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

Rack Side 4 Spaces (3/4 sh)- DB-4123 M&L Polishing one coat to old surfaces to hat stand with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed. Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

Rack Side 4 Spaces (3/4 sh)- DB-4123 M&L Polishing two coats to new surfaces to hat stand with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

Table Bed Side W/Drawer and w/o drawer : DB-3956, DB-4043 S&F following components of table including dismantling taking out carefully & renewal of old components with new components of table complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

M&L renewal of drawer including knob with complete new drawer made out of Ist class hard wood (teak wood) with knob as approved by GE complete all as shown on drgs, specified and directed.

M&L Polishing one coat to old surfaces to table bed side with drawer with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

M&L Polishing two coats to new surfaces to table bed side with drawer with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

M&L Polishing one coat to old surfaces to table bed side without drawer with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

M&L Polishing two coats to new surfaces to table bed side without drawer with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

Almirah Large with Shelf- DB-4155 S & F following components of almirah including dismantling taking out carefully & renewal of old components with new components of almirah. Complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

M&L renewal of shelf with new shelf complete all as shown on drg, specified and directed.

M&L renewal of hasp & staple with new hasp & staple complete all as specified and directed.

M&L Polishing one coat to old surfaces to almirah with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

M&L Polishing two coats to new surfaces to almirah with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment complete all as specified and directed.

MIRROR DRESSING GENTS (MAP) : FD/E6/MAP/16 S&F following components of mirror dressing gents including dismantling taking out carefully & renewal of old components with new components of mirror dressing gents complete all as shown on drg, specified and directed. Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

M&L for renewal of back frame with new back frame made out of 50mm x 28mm teak wood members & 12mm thick BWR Plywood, made to shape fixed in position all as shown on drg, specified & directed.

M&L for renewal of mirror with new mirror of size 600mm x 1200mm x 5.5mm thick made to shape fixed in position all as shown on drg, specified & directed.

S&F in renewal of 5.5mm thick glass shelves of size 600mm x100mm made to shape fixed in position all as shown on drg, specified & directed.

M&L Polishing one coat to old surfaces to mirror dressing gents with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

M&L Polishing two coats to new surfaces to mirror dressing gents with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

M/s Bansal Brothers and Co. (BID ID -3126891)