REAPIR TO INTERNAL PERIODICAL JOINERY FLOORING PLUMBING INCLUDING SANITARY FITTING OF OTM ACCN AT NARIANA IN THE AOR OF AGE BR I UNDER GE NORTH DELHI CANTT 10

Amount

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M&L for ready mix plaster of 15mm thick on brick or conc surfaces in wall (External surfaces) incl necessary cement slurry with builk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer complete all as specified and directed (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP)

M&L for ready mix plaster of 10mm thick on brick or conc surfaces in wall (Internal surfaces) incl necessary cement slurry with builk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer complete all as specified and directed (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP)

M&L for ready mix plaster of 05mm thick on brick or as in fascia / edging / ceiling of Chajjas, roof projections etc incl necessary cement slurry with builk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer complete all as specified and directed (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP)

Preparation of New plastered surface of external wall and making the surface smooth with sand paper and priming the surface with alkali resistance primer paint for external surface, over primed surface applying two coat of cement base paint incl curing complete all as specified & directed.

Preparation of New plastered surface of internal wall and making the surface smooth with sand paper and priming the surface on plastered surfaces, primer paint for internal surface, over primed surface applying two coat of oil bound distemper complete all as specified & directed.

Preparation of New plastered surface of internal wall and making the surface smooth with sand paper and priming the surface on plastered surfaces, for internal surface, over primed surface applying three coat of white wash complete all as specified & directed.

Material & Labour for for applying Two coat of white wash over new surfaces including preparation of new plastered surface of ceiling, complete all as specified.

Preparation of Old surface of wall after complete removal of existing treatment making the surface smooth and applying two coat of oil bound distemper (OBD) over a coat of Chalk whiting, on plastered surfaces, prepara-tory to distempering all as specified & directed.

Material & Labour for applying Two coat of white wash over old surfaces including preparation of old plastered surface of ceiling, complete all as specified.

M&L two coats of synthetic enamel paint on old steel surfaces of any description, exc 10 Cms in width or girth, including preparation of surfaces, complete all as specified and directed.

Ditto all as per Item No 11 above, but on old wooden surfaces complete all as sepecified.

M & L for cement concrete (1:2:4) type " B1 " ( using 20 mm graded stone aggregate) as seismic, hold fast, plinth and similar bands, coping, kerbs, cills, steps, parapets, apex stones, bed plates, kerbs, railings up to 60 cm in height, water troughs and the like rounded or chamfered on edges including necessary form work.

S & F in repair False ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm of manufacturer M/s Saint Gobain or equivalent of Armstong/Everest including taking down existing ceiling board & grid work etc of any type/pattern complete.

Taking down chowkhats of frames n exc 1.50 sqm with shutters (without taking off shutters from the frames) all as spd.

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as spd.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats all as specified and directed

S & F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

M & L preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F Anodised powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators 114.30 mm x 44.45 x 3.18 mm with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.

S&F Anodized aluminium door shutters powder coating (any colour decided by GE) of thk not lesss than 50 micron, aluminium section in which size of shutter top members 47.62 x 44.45 x 3.18 mm , shutter bottom member 100 x 44.45 x 3.18 mm , shutter vertical members 47.62 x 44.45 x 3.18 mm and shutter lock rail member of size 63.50 x 44.45 x 2.40 mm including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos each door, hinges, anodised aluminium snap beading screws etc complete all as specified.

S&F Anodized aluminium powder coated window and ventilator shutters, glazed shutter having stile and rails size 44.60 x 30.00 x 3.18 mm thick with triangular aluminium beading of 15 mm size side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings, such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2 Nos) suitable handle (1 No) complete all as specified and as directed.

S & F in repair Powder coated aluminium(minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

Providing and fixing 4mm thick aluminium composite panel exterior grade (0.5mm PVDF coated Aluminium skin on top & bottom plus 3mm thick polyethylene core) on/all-round RCC/Brick column/wall/Fascia's/M.S. section/Aluminium section structure/dead walls/under side sky light upto all heighs in required colour/

S&F in repair Brass mortice lock 4-lever vertical type, size 100 mm all as specified.

Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips

S&F 5.5 mm thick frosted sheet glass, ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane.

S & F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or tinned tacks all as specified & directed.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed.

S & F 3 mm thick Figured glass, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane

S&F Aluminium (extruded aluminium section body) Door closer hydraulically regulated,designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight 61 to 80 kg complete all as specified and as directed.

S & F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.

Demolitin of brickwork built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles complete.

Brick work with sub class'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:6) all as spd and directed

Brick work with sub class'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:4) all as spd and directed

Dismantling old floor tile incl cement mortar bedding and removal of debris out of premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors, set and jointed (joint free) in neat cement slurry and pointed in coloured cement, over and incl screed bed 15mm thick in CM (1:4) and finished rough all as spd and directed

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in skirting/dado/risers of steps etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement.over and incl rendering 10mm thick in CM (1:4) and finished rough, complete all as specified.

M&L 10 mm thick light shade vitrified ceramic tiles (square/rectangular) polished, area of each tiles not exceeeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed 15mm thick in CM (1:4) and finished rough complete all as specified.

M&L 10 mm thick light shade vitrified ceramic tiles (square/rectangular) polished, area of each tiles not exceeeding 0.36 sqm, in skirting / dado / risers of steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl rendering 10mm thick in CM (1:4) and finished rough, complete all as specified.

M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, complete all as spd & directed.

M&L for 12mm thick Endura tiles (Square or rectangle) area of each tile exc 0.08sqm but n exc 0.18 sqm in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over and including 15mm thickscreed bed or bedding layer of cement mortar in CM 1:4 including diasmanling of old floor tiles oncl cement mortar bedding and removal old debries our of premises complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks (capacity exc 500 Ltrs but n exc 1000 Ltrs) and from mouths of circulating pipes, etc.

Dismantling water tanks capacity exc 500 Ltrs but n exc 1000 Ltrs and removing to store

S & F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S & F in repair 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete.

S & F in repair 25 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete.

S & F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic wall, screwed for iron pipe and fixed for 25 mm bore size (Minimum weight 210gms), complete.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia all as specified and directed.

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

Refixing of old steel tubing 15 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc all as specified

M&L cutting chases pinning in brick masonary and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10 cm in girth.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

Refixing of old steel tubing 20 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc all as specified

S & F Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread , complete all as spd and directed

S&F in repairs 15mm bore pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked add if fixed in repairs complete all as specified & directed.

S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe etc, including flush pipe of polyethylene of low or high density or PVC 32 mm dia, for connecting low level cistern, complete.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap, Incl supply and fixing of PVC seat and cover for pedestal pan complete all as specified and as directed.

S & F 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flushing pipe (exclusive of brackets), fixed in repairs

S & F in repair vitreous China urinal Half stall type, white with grating and unions for discharge pipe including providing and fixing plugs, bedding urinal with 15 mm bore urinal spreader and waste coupling of PTMT min wt for urinal for urinals, (Minimum weight 32mm), & waste pipe against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement complete all as specified

Supply & fixed Vitreous China urinal partition white of size 310 X 700 mm complete.

S &F fancy type chromium plated stop valve cast copper alloy (ISI Marked) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, in reapirs complete all as specified and directed.

S & F Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia in repair, complete all as specified and directed.

S& F in repair CP Shower rose with or without swivel joints, 125mm size,including fixing to steel pipe or union complete all as spd and directed.

S&F in repair Bib taps for 15 mm bore pipe, cast copper alloy fancy type chromium plated fixed in repairs of Make - Jaquar , Marc and Johnson complete all as spd and directed.

S&F in repair towel rail CP 600 mm long complete all as specified and directed.

S & F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. Make:Paryag/Polytech

S & F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms)

M & L in repair 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete.

Taking down eaves gutters and rainwater pipes 100 mm dia (any size or pattern) , including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing or removal to store .

S&F PVC(SWR) pipes 75mm bore, single socketd , in any length with rubber ring joints, laid in trenches in floors

S&F PVC(SWR) pipes 110mm bore, single socketd , in any length with rubber ring joints, laid in trenches in floors

S&F PVC(SWR) pipes 110mm bore, single socketd , in any length with rubber ring joints, clips, etc. , in any length fixed to walls

S&F PVC (SWR) bend any radius with oval access door 75mm dia bore in repair

S&F PVC (SWR) bend any radius with oval access door 110mm dia bore in repair

S&F PVC (SWR) bend any radius 110mm dia bore in repair

S & F 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete in repair

S & F 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete in repair

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) all as directed.

M & L cement concrete type C-1, 1:3:6 (using 40mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified

M&L for 75 mm thick PCC 1:4:8 type D-2 as in subbase to flooring.

M&L 60 mm thick M-40 grade machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006, with grey cement and minimum 15 % fly Ash content and no pigment, over and including 50 mm thick sand coushioning all as specified and as directed.

M & L Cement concrete tiles 300cm x 300 x 22mm thick machine pressed; set jointed with grey cement and pigments and pointed in neat cement slurry in floors, and cut and polished over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified.

M & L in repair PVC hollow wall panelling 5 mm thick multy grain finish prelaminated inclusive of fixing on wall incl moulding ends caps fixed with PVC sleeves and screws as required at site complete all as specified and directed.

Schedule of Credit - Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - 50,162.00

STAR CONSTRUCTION CO

SARTHEE CONSTRUCTION CO.

QUALITY CONSTRUCTIONS CO

R. S. Associates

RASTOGI BUILDERS

M/S Blues Developers Pvt. ltd

The new hut furnitures