WBPWD/EE-I/CKHED/eNIT-36/24-25

Amount

SITC of Microprocessor based programmable window alarm annunciator wall mounting panel made out 4/16 SWG CRCA Sheet with Base chanel of 75mm in black shade with gaskets, Lifting Hooks, Locks & Hinged Door with Cable Entry at Bottom and painted with Powder Coated Siemens Grey RAL 7035 shade, having Dimension 500mm(L) x 250mm(D) x 500mm(H) Approx and includes the following a) Microprocessor 16nos window alarm annunciator 240VAC, Size - H 138 x W 138mm (per window H 31.55 x W 31.55mm), Make-GIC, Model - AU2D16S -1Set b) Solid state Volume adjustable Hooter 220V AC (Make-GIC) - 1 Set c) Flash type push botton for test, reset, accept (Make-L&T) - 3 set d) PLC Extension module 110V AC-240V AC 8DI & 4DO (Make-GIC) - 3 Set e) PLC Base module 110V AC-240V AC 8DI & 4DO (Make-GIC-Genie Nx) - 1 Set f) Control MCB 6A SP 10kA MCB, 'C' Curve (Make-L&T) - 2 Set g) Neutral & Earth Link (Make- FTC/Reputed) - 1Set each The panel should be located in Facility Manager Office and to be fixed on the wall with 3"x1/4" M.S. Bullet fastner complete with all necy. Connections as required as per direction of EIC

Distn. Wiring in 1.1 Kv gr. Single core stranded ‘FRLS’ PVC insulated & unsheathed cu. wire (Make: Havells) in 20mm size PVC rigid conduit ‘FR’ (Precision make) incl. necy. fitting as reqd. as reqd. as per direction of EIC.

a) 2x1.5sq.mm for ECC

b) 2x2.5 sq.mm + 1x1.5 sqmm for ECC

Supply & Laying of follwing 1.1 Kv. Grade PVC/XLPE armoured copper conductor multicore power control cable (Make: Havells) with earthing attachment in 10 SWG GI (Hot Dip) Wire to be laid as mentioned below :-

A) 1.5 sq.mm. X 16 core (For Centre of Excellence Building).

1) Surface on wall

2) Through existing masonary trench

3) Through Cable Tray

B) 1.5 sq.mm x 14 core (For Male & Female ward)

1) Surface on wall

2) Through existing masonary trench

3) Through Cable Tray

4) Laying Through underground with brick protection below 760mm average depth.

S&F Compression type gland complete with brass gland,brass ring & rubberring for dust and moisture roof entry of PVC/Ar. Copper cable as below :-

a) 1.5 sq.mm. X 16 core.

b) 1.5 sq.mm. X 14 core.

Finishing the ends of copper wire by socketing with pin/ring type copper socket and insulated tpes as reqd. As per G.S.

a) 2.5 & 1.5 sq.mm.

S&F 10" X 8" x 4" (250mm.X200mm.X100mm.) M.S.Box made out of 16 SWG CRCA sheet with 3mm.thick white colour bakleite cover on top including placing M.S.channel/ DIN Rail at the middle of the board and fix the board on surface on wall with 4nos. suitable size of M.S. Bullet fastner as per direction of EIC.

S&F 8" X 6" x 4" (200mm.X150mm.X100mm.) M.S.Box made out of 16 SWG CRCA sheet with 3mm.thick white colour bakleite cover on top including placing M.S.channel/ DIN Rail at the middle of the board and fix the board on surface on wall with 4nos. suitable size of M.S. Bullet fastner as per direction of EIC.

S&F 10 Amps Universal DIN Rail Mounted Feed Through Terminals in Polyamide 6.6 Housing Connector (Make : Elmex-KUTM2.5) as per IEC 60947-7-1 with End Plate, Shorting Link & Label Marker having double nut protection fixed inside the above box on existing MS channel/ DIN Rail firmly & rigidly for connection of all incoming & outgoing copper wires as per direction of E.I.C.

S&F 2-module Plexo Box & adaptor with PVC membrane (Legrand-680612) on surface on wall as per direc tion of EIC.

S&F 6A. 2-module bell push (Legrand-5734 59) to be fixed on plexo box complete with all necessary connections as reqd. as per direction of EIC.

S&F 10A. SP MCB (10kA 'C' curve) on existing SPN MCB DB complete with all necy. Connections (Legrand make) as per G.S.

S&F perforated G.I.cable tray of size 200X50x1.25mm.(18 SWG) fixed on wall with 25x25x3mm. angle iron support incl. G.I.nut, bolts & steel fastners as required and painting of MS support with anticorrosive black paint as per direction of E.I.C.

Cutting hole in concrete or wall incl.mending good the damages to bldg. Works as directed by EIC.

Hiring charges of Scaffolding arrangement including dismantling at the end of work for fixing of PVC/Ar.power control cable up to 3rd. floor as directed by EIC

Supply & Fixing of Name Plate of size 8" x 4" in different location within hospital campus. Made with 18 gauge thick (1.2-1.25 mm) Stainless Steel 316 grade Plate with RED Font colour, Content will be PANIC BUTTON in English, Font size to be 1 to 1.5 inch, installation methodology should be as per the location i.e screws for wood and masonry etc. and design details should be finalised and get approved by EIC.

Supply & fixing following sizes of medium gauge GI Pipe (ISI-Medium) protection with necessary fittings and jointing materials.

Rate should be quoted incl. of all taxes and cess.

Defect Liability period : 1 year

NAYEE DISHA PROJECTS (BID ID -5702475)

OVERSEAS TRADING AND SUPPLIES CORPORATION (BID ID -5626558)

STANDARD BUILDERS (BID ID -5639240)